bail after 256-bits to avoid producing code that the backends can't handle.
Previously, we capped it at 64-bits, preferring to miscompile in those cases.
This change also reverts much of r52248 because the invariants the code was
expecting are now being met.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53812 91177308-0d34-0410-b5e6-96231b3b80d8
with code that was expecting different bit widths for different values.
Make getTruncateOrZeroExtend a method on ScalarEvolution, and use it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52248 91177308-0d34-0410-b5e6-96231b3b80d8
several things that were neither in an anonymous namespace nor static
but not intended to be global.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51017 91177308-0d34-0410-b5e6-96231b3b80d8
manually performing the comparison. This allows the special
case to work correctly even in the case where someone is
experimenting with a different comparison function :-).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@49670 91177308-0d34-0410-b5e6-96231b3b80d8
Parse reversed smax and umax as smin and umin and express them with negative
or binary-not SCEVs (which are really just subtract under the hood).
Parse 'xor %x, -1' as (-1 - %x).
Remove dead code (ConstantInt::get always returns a ConstantInt).
Don't use getIntegerSCEV(-1, Ty). The first value is an int, then it gets
passed into a uint64_t. Instead, create the -1 directly from
ConstantInt::getAllOnesValue().
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@47360 91177308-0d34-0410-b5e6-96231b3b80d8
variable (with step 1) and m is its final value. Then, the correct trip
count is SMAX(m,n)-n. Previously, we used SMAX(0,m-n), but m-n may
overflow and can't in general be interpreted as signed.
Patch by Nick Lewycky.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@47007 91177308-0d34-0410-b5e6-96231b3b80d8
to the RHS. This simple change allows to compute loop iteration count
for loops with condition similar to the one in the testcase (which seems
to be quite common).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46959 91177308-0d34-0410-b5e6-96231b3b80d8
arbitrary iteration.
The patch:
1) changes SCEVSDivExpr into SCEVUDivExpr,
2) replaces PartialFact() function with BinomialCoefficient(); the
computations (essentially, the division) in BinomialCoefficient() are
performed with the apprioprate bitwidth necessary to avoid overflow;
unsigned division is used instead of the signed one.
Computations in BinomialCoefficient() require support from the code
generator for APInts. Currently, we use a hack rounding up the
neccessary bitwidth to the nearest power of 2. The hack is easy to turn
off in future.
One remaining issue: we assume the divisor of the binomial coefficient
formula can be computed accurately using 16 bits. It means we can handle
AddRecs of length up to 9. In future, we should use APInts to evaluate
the divisor.
Thanks to Nicholas for cooperation!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46955 91177308-0d34-0410-b5e6-96231b3b80d8
Reimplement the xform in Analysis/ConstantFolding.cpp where we can use
targetdata to validate that it is safe. While I'm in there, fix some const
correctness issues and generalize the interface to the "operand folder".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44817 91177308-0d34-0410-b5e6-96231b3b80d8
is disabled in the sense that it will refuse to create one from a UDiv
instruction, until the code is better tested.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44163 91177308-0d34-0410-b5e6-96231b3b80d8
Use APFloat in UpgradeParser and AsmParser.
Change all references to ConstantFP to use the
APFloat interface rather than double. Remove
the ConstantFP double interfaces.
Use APFloat functions for constant folding arithmetic
and comparisons.
(There are still way too many places APFloat is
just a wrapper around host float/double, but we're
getting there.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@41747 91177308-0d34-0410-b5e6-96231b3b80d8
Always pass the constant as the second parameter to HowManyLessThans.
Remove obsolete "isSigned" parameter.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@39893 91177308-0d34-0410-b5e6-96231b3b80d8
deleteValueFromRecords and loosen the types to all it to accept
Value* instead of just Instruction*, since this is what
ScalarEvolution uses internally anyway. This allows more flexibility
for future uses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@37657 91177308-0d34-0410-b5e6-96231b3b80d8
add operands after constant operands. The recent change to recognize
sign-extend expressions caused this to be exposed more often.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@37628 91177308-0d34-0410-b5e6-96231b3b80d8
This created an ambiguity for expandInTy to decide when to use
sign-extension or zero-extension, but it turns out that most of its callers
don't actually need a type conversion, now that LLVM types don't have
explicit signedness. Drop expandInTy in favor of plain expand, and change
the few places that actually need a type conversion to do it themselves.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@37591 91177308-0d34-0410-b5e6-96231b3b80d8
Due to darwin gcc bug, one version of darwin linker coalesces
static const int, which defauts PassID based pass identification.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@36652 91177308-0d34-0410-b5e6-96231b3b80d8
Fix a div-by-zero bug noticed by APInt. This fixes:
test/Transforms/IndVarsSimplify/exit_value_tests.llx
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@36099 91177308-0d34-0410-b5e6-96231b3b80d8
First round of ConstantRange changes. This makes all CR constructors use
only APInt and not use ConstantInt. Clients are adjusted accordingly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@34756 91177308-0d34-0410-b5e6-96231b3b80d8
This feature is needed in order to support shifts of more than 255 bits
on large integer types. This changes the syntax for llvm assembly to
make shl, ashr and lshr instructions look like a binary operator:
shl i32 %X, 1
instead of
shl i32 %X, i8 1
Additionally, this should help a few passes perform additional optimizations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@33776 91177308-0d34-0410-b5e6-96231b3b80d8
This is the final patch for this PR. It implements some minor cleanup
in the use of IntegerType, to wit:
1. Type::getIntegerTypeMask -> IntegerType::getBitMask
2. Type::Int*Ty changed to IntegerType* from Type*
3. ConstantInt::getType() returns IntegerType* now, not Type*
This also fixes PR1120.
Patch by Sheng Zhou.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@33370 91177308-0d34-0410-b5e6-96231b3b80d8
rename Type::getIntegralTypeMask to Type::getIntegerTypeMask.
This makes naming much more consistent. For example, there are now no longer any
instances of IntegerType that are not considered isInteger! :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@33225 91177308-0d34-0410-b5e6-96231b3b80d8
recommended that getBoolValue be replaced with getZExtValue and that
get(bool) be replaced by get(const Type*, uint64_t). This implements
those changes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@33110 91177308-0d34-0410-b5e6-96231b3b80d8
Merge ConstantIntegral and ConstantBool into ConstantInt.
Remove ConstantIntegral and ConstantBool from LLVM.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@33073 91177308-0d34-0410-b5e6-96231b3b80d8
This patch replaces signed integer types with signless ones:
1. [US]Byte -> Int8
2. [U]Short -> Int16
3. [U]Int -> Int32
4. [U]Long -> Int64.
5. Removal of isSigned, isUnsigned, getSignedVersion, getUnsignedVersion
and other methods related to signedness. In a few places this warranted
identifying the signedness information from other sources.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@32785 91177308-0d34-0410-b5e6-96231b3b80d8
This patch removes the SetCC instructions and replaces them with the ICmp
and FCmp instructions. The SetCondInst instruction has been removed and
been replaced with ICmpInst and FCmpInst.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@32751 91177308-0d34-0410-b5e6-96231b3b80d8
Rename getZeroExtend and getSignExtend to getZExt and getSExt to match
the the casting mnemonics in the rest of LLVM.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@32514 91177308-0d34-0410-b5e6-96231b3b80d8
The long awaited CAST patch. This introduces 12 new instructions into LLVM
to replace the cast instruction. Corresponding changes throughout LLVM are
provided. This passes llvm-test, llvm/test, and SPEC CPUINT2000 with the
exception of 175.vpr which fails only on a slight floating point output
difference.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@31931 91177308-0d34-0410-b5e6-96231b3b80d8
Make necessary changes to support DIV -> [SUF]Div. This changes llvm to
have three division instructions: signed, unsigned, floating point. The
bytecode and assembler are bacwards compatible, however.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@31195 91177308-0d34-0410-b5e6-96231b3b80d8
This patch implements the first increment for the Signless Types feature.
All changes pertain to removing the ConstantSInt and ConstantUInt classes
in favor of just using ConstantInt.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@31063 91177308-0d34-0410-b5e6-96231b3b80d8
PR726 by performing consistent signed division, not consistent unsigned
division when evaluating scev's. Do not touch udivs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@27326 91177308-0d34-0410-b5e6-96231b3b80d8
into the LLVMAnalysis library.
This allows LLVMTranform and LLVMTransformUtils to be archives and linked
with LLVMAnalysis.a, which provides any missing definitions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@24036 91177308-0d34-0410-b5e6-96231b3b80d8
If we fold three constants together (c1+c2+c3), make sure to keep
LHSC updated, instead of reusing (in this case), the 1 instead of the
partial sum.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@20337 91177308-0d34-0410-b5e6-96231b3b80d8
infinite loops (using the new replaceSymbolicValuesWithConcrete method).
This patch reverts this patch:
http://mail.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20050131/023830.html
... which was an attempted fix for this problem. Unfortunately, that patch
caused test/Regression/Transforms/IndVarsSimplify/exit_value_tests.llx to fail
and slightly castrated the entire analysis. This patch fixes it right.
This patch is dedicated to jeffc, for making me deal with this. :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@20146 91177308-0d34-0410-b5e6-96231b3b80d8
Make only one print method to avoid overloaded virtual warnings when \
compiled with -Woverloaded-virtual
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@18589 91177308-0d34-0410-b5e6-96231b3b80d8
All SPEC CFP 95 programs now work, though the JIT isn't loading -lf2c right
so they aren't testing correctly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@18499 91177308-0d34-0410-b5e6-96231b3b80d8
to go in. This patch allows us to compute the trip count of loops controlled
by values loaded from constant arrays. The cannonnical example of this is
strlen when passed a constant argument:
for (int i = 0; "constantstring"[i]; ++i) ;
return i;
In this case, it will compute that the loop executes 14 times, which means
that the exit value of i is 14. Because of this, the loop gets DCE'd and
we are happy. This also applies to anything that does similar things, e.g.
loops like this:
const float Array[] = { 0.1, 2.1, 3.2, 23.21 };
for (int i = 0; Array[i] < 20; ++i)
and is actually fairly general.
The problem with this is that it almost never triggers. The reason is that
we run indvars and the loop optimizer only at compile time, which is before
things like strlen and strcpy have been inlined into the program from libc.
Because of this, it almost never is used (it triggers twice in specint2k).
I'm committing it because it DOES work, may be useful in the future, and
doesn't slow us down at all. If/when we start running the loop optimizer
at link-time (-O4?) this will be very nice indeed :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@16926 91177308-0d34-0410-b5e6-96231b3b80d8
Move include/Config and include/Support into include/llvm/Config,
include/llvm/ADT and include/llvm/Support. From here on out, all LLVM
public header files must be under include/llvm/.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@16137 91177308-0d34-0410-b5e6-96231b3b80d8
by address. This prevents the resultant SCEV objects from depending on
where in memory other scev objects happen to live.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@14263 91177308-0d34-0410-b5e6-96231b3b80d8
structure to being dynamically computed on demand. This makes updating
loop information MUCH easier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@13045 91177308-0d34-0410-b5e6-96231b3b80d8
operations. This allows us to compile this testcase:
int main() {
int h = 1;
do h = 3 * h + 1; while (h <= 256);
printf("%d\n", h);
return 0;
}
into this:
int %main() {
entry:
call void %__main( )
%tmp.6 = call int (sbyte*, ...)* %printf( sbyte* getelementptr ([4 x sbyte]* %.str_1, long 0, long 0), int 364 ) ; <int> [#uses=0]
ret int 0
}
This testcase was taken directly from 256.bzip2, believe it or not.
This code is not as general as I would like. Next up is to refactor it
a bit to handle more cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@13019 91177308-0d34-0410-b5e6-96231b3b80d8
even if the loop is using expressions that we can't compute as a closed-form.
This allows us to calculate that this function always returns 55:
int test() {
double X;
int Count = 0;
for (X = 100; X > 1; X = sqrt(X), ++Count)
/*empty*/;
return Count;
}
And allows us to compute trip counts for loops like:
int h = 1;
do h = 3 * h + 1; while (h <= 256);
(which occurs in bzip2), and for this function, which occurs after inlining
and other optimizations:
int popcount()
{
int x = 666;
int result = 0;
while (x != 0) {
result = result + (x & 0x1);
x = x >> 1;
}
return result;
}
We still cannot compute the exit values of result or h in the two loops above,
which means we cannot delete the loop, but we are getting closer. Being able to
compute a constant trip count for these two loops will allow us to unroll them
completely though.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@13017 91177308-0d34-0410-b5e6-96231b3b80d8
at the bottom of the loop instead of the top. This reduces the number of
overlapping live ranges a lot, for example, eliminating a spill in an important
loop in 183.equake with linear scan.
I still need to make the exit comparison of the loop use the post-incremented
version of this variable, but this is an easy first step.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@12952 91177308-0d34-0410-b5e6-96231b3b80d8