The getPointerRegClass() hook can return register classes that depend on
the calling convention of the current function (ptr_rc_tailcall).
So far, we have been able to infer the calling convention from the
subtarget alone, but as we add support for multiple calling conventions
per target, that no longer works.
Patch by Yiannis Tsiouris!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156328 91177308-0d34-0410-b5e6-96231b3b80d8
This function could have r12 live across a function call when compiling
thumb1 code.
The test case for this is not included because it is very long. It must
provoke emergency spilling near a function call. The behavior is
provoked by MultiSource/Applications/JM/lencod, and it triggers an
assertion in the scavenger.
<rdar://problem/10963642>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151855 91177308-0d34-0410-b5e6-96231b3b80d8
When an outgoing call takes more than 2k of arguments on the stack, we
don't allocate that call frame in the prolog, but adjust the stack
pointer immediately before the call instead.
This causes problems with the emergency spill slot because PEI can't
track stack pointer adjustments on the second pass, and if the outgoing
arguments are too big, SP can't be used to reach the emergency spill
slot at all.
Work around these problems by ensuring there is a base or frame pointer
that can be used to access the emergency spill slot.
<rdar://problem/10917166>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151604 91177308-0d34-0410-b5e6-96231b3b80d8
generator to it. For non-bundle instructions, these behave exactly the same
as the MC layer API.
For properties like mayLoad / mayStore, look into the bundle and if any of the
bundled instructions has the property it would return true.
For properties like isPredicable, only return true if *all* of the bundled
instructions have the property.
For properties like canFoldAsLoad, isCompare, conservatively return false for
bundles.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146026 91177308-0d34-0410-b5e6-96231b3b80d8
the tADDrSPi instruction can't be used. Make sure we're updating the opcode
to tADDi3 in all cases.
rdar://10254707
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141523 91177308-0d34-0410-b5e6-96231b3b80d8
Add the predicate operand to the instructions. Update the back end
accordingly where the instructions are used. Restrict the SP operands
to actually only be SP, as otherwise these break assembly parsing for the
normal instruction variants.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138445 91177308-0d34-0410-b5e6-96231b3b80d8
Merge the tMOVr, tMOVgpr2tgpr, tMOVtgpr2gpr, and tMOVgpr2gpr instructions
into tMOVr. There's no need to keep them separate. Giving the tMOVr
instruction the proper GPR register class for its operands is sufficient
to give the register allocator enough information to do the right thing
directly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134204 91177308-0d34-0410-b5e6-96231b3b80d8
Fix a FIXME and allow predication (in Thumb2) for the T1 register to
register MOV instructions. This allows some better codegen with
if-conversion (as seen in the test updates), plus it lays the groundwork
for pseudo-izing the tMOVCC instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134197 91177308-0d34-0410-b5e6-96231b3b80d8
The tSpill and tRestore instructions are just copies of the tSTRspi and
tLDRspi instructions, respectively. Just use those directly instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134092 91177308-0d34-0410-b5e6-96231b3b80d8
sink them into MC layer.
- Added MCInstrInfo, which captures the tablegen generated static data. Chang
TargetInstrInfo so it's based off MCInstrInfo.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134021 91177308-0d34-0410-b5e6-96231b3b80d8
The hook will be used by the register allocator when recomputing register
classes after removing constraints.
Thumb1 code doesn't allow anything larger than tGPR, and x86 needs to ensure
that the spill size doesn't change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@130228 91177308-0d34-0410-b5e6-96231b3b80d8
This is just very first approximation how the stuff should be done
(e.g. ARM-only for now). More to follow.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127101 91177308-0d34-0410-b5e6-96231b3b80d8
set up the source operands. The original instr has an immediate operand that
should be replaced with the frame reg operand rather than just adding the
reg operand. Previously, the instruction ended up with too many operands
causing an assert() when adding the default predicate. rdar://8825456
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123387 91177308-0d34-0410-b5e6-96231b3b80d8
to be the one we want to use. bugpoint reduced testcase is a little large,
I'll see if I can simplify it down more.
Fixes part of rdar://8782207
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122307 91177308-0d34-0410-b5e6-96231b3b80d8
instruction based on the t_addrmode_s# mode and what it returned. There is some
obvious badness to this. In particular, it's hard to do MC-encoding when the
instruction may change out from underneath you after the t_addrmode_s# variable
is finally resolved.
The solution is to revert a long-ago change that merged the reg/reg and reg/imm
versions. There is the addition of several new addressing modes. They no longer
have extraneous operands associated with them. I.e., if it's reg/reg we don't
have to have a dummy zero immediate tacked on to the SDNode.
There are some obvious cleanups here, which will happen shortly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121747 91177308-0d34-0410-b5e6-96231b3b80d8
setup they require. Use this for ARM/Darwin to rematerialize the base
pointer from the frame pointer when required. rdar://8564268
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@116879 91177308-0d34-0410-b5e6-96231b3b80d8
between the high and low registers for prologue/epilogue code. This was
a Darwin-only thing that wasn't providing a realistic benefit anymore.
Combining the save areas simplifies the compiler code and results in better
ARM/Thumb2 codegen.
For example, previously we would generate code like:
push {r4, r5, r6, r7, lr}
add r7, sp, #12
stmdb sp!, {r8, r10, r11}
With this change, we combine the register saves and generate:
push {r4, r5, r6, r7, r8, r10, r11, lr}
add r7, sp, #12
rdar://8445635
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@114340 91177308-0d34-0410-b5e6-96231b3b80d8
"For ARM stack frames that utilize variable sized objects and have either
large local stack areas or require dynamic stack realignment, allocate a
base register via which to access the local frame. This allows efficient
access to frame indices not accessible via the FP (either due to being out
of range or due to dynamic realignment) or the SP (due to variable sized
object allocation). In particular, this greatly improves efficiency of access
to spill slots in Thumb functions which contain VLAs."
r112986 fixed a latent bug exposed by the above.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112989 91177308-0d34-0410-b5e6-96231b3b80d8
large local stack areas or require dynamic stack realignment, allocate a
base register via which to access the local frame. This allows efficient
access to frame indices not accessible via the FP (either due to being out
of range or due to dynamic realignment) or the SP (due to variable sized
object allocation). In particular, this greatly improves efficiency of access
to spill slots in Thumb functions which contain VLAs.
rdar://7352504
rdar://8374540
rdar://8355680
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112883 91177308-0d34-0410-b5e6-96231b3b80d8
Also added a test case to check for the added benefit of this patch: it's optimizing away the unnecessary restore of sp from fp for some non-leaf functions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@110707 91177308-0d34-0410-b5e6-96231b3b80d8
reserved, not available for general allocation. This eliminates all the
extra checks for Darwin.
This change also fixes the use of FP to access frame indices in leaf
functions and cleaned up some confusing code in epilogue emission.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@110655 91177308-0d34-0410-b5e6-96231b3b80d8
