Now that fixup_ppc_ha16 and fixup_ppc_lo16 are being treated exactly
the same everywhere, it no longer makes sense to have two fixup types.
This patch merges them both into a single type fixup_ppc_half16,
and renames fixup_ppc_lo16_ds to fixup_ppc_half16ds for consistency.
(The half16 and half16ds names are taken from the description of
relocation types in the PowerPC ABI.)
No change in code generation expected.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182092 91177308-0d34-0410-b5e6-96231b3b80d8
The current PowerPC MC back end distinguishes between fixup_ppc_ha16
and fixup_ppc_lo16, which are determined by the instruction the fixup
applies to, and uses this distinction to decide whether a fixup ought
to resolve to the high or the low part of a symbol address.
This isn't quite correct, however. It is valid -if unusual- assembler
to use, e.g.
li 1, symbol@ha
or
lis 1, symbol@l
Whether the high or the low part of the address is used depends solely
on the @ suffix, not on the instruction.
In addition, both
li 1, symbol
and
lis 1, symbol
are valid, assuming the symbol address fits into 16 bits; again, both
will then refer to the actual symbol value (so li will load the value
itself, while lis will load the value shifted by 16).
To fix this, two places need to be adapted. If the fixup cannot be
resolved at assembler time, a relocation needs to be emitted via
PPCELFObjectWriter::getRelocType. This routine already looks at
the VK_ type to determine the relocation. The only problem is that
will reject any _LO modifier in a ha16 fixup and vice versa. This
is simply incorrect; any of those modifiers ought to be accepted
for either fixup type.
If the fixup *can* be resolved at assembler time, adjustFixupValue
currently selects the high bits of the symbol value if the fixup
type is ha16. Again, this is incorrect; see the above example
lis 1, symbol
Now, in theory we'd have to respect a VK_ modifier here. However,
in fact common code never even attempts to resolve symbol references
using any nontrivial VK_ modifier at assembler time; it will always
fall back to emitting a reloc and letting the linker handle it.
If this ever changes, presumably there'd have to be a target callback
to resolve VK_ modifiers. We'd then have to handle @ha etc. there.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182091 91177308-0d34-0410-b5e6-96231b3b80d8
This patch removes alias definition for addiu $rs,$imm
and instead uses the TwoOperandAliasConstraint field in
the ArithLogicI instruction class.
This way all instructions that inherit ArithLogicI class
have the same macro defined.
The usage examples are added to test files.
Patch by Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182048 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds bnez and beqz instructions which represent alias definitions for bne and beq instructions as follows:
bnez $rs,$imm => bne $rs,$zero,$imm
beqz $rs,$imm => beq $rs,$zero,$imm
The corresponding test cases are added.
Patch by Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182040 91177308-0d34-0410-b5e6-96231b3b80d8
Now that applyFixup understands differently-sized fixups, we can define
fixup_ppc_lo16/fixup_ppc_lo16_ds/fixup_ppc_ha16 to properly be 2-byte
fixups, applied at an offset of 2 relative to the start of the
instruction text.
This has the benefit that if we actually need to generate a real
relocation record, its address will come out correctly automatically,
without having to fiddle with the offset in adjustFixupOffset.
Tested on both 64-bit and 32-bit PowerPC, using external and
integrated assembler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181894 91177308-0d34-0410-b5e6-96231b3b80d8
ARM FastISel is currently only enabled for iOS non-Thumb1, and I'm working on
enabling it for other targets. As a first step I've fixed some of the tests.
Changes to ARM FastISel tests:
- Different triples don't generate the same relocations (especially
movw/movt versus constant pool loads). Use a regex to allow either.
- Mangling is different. Use a regex to allow either.
- The reserved registers are sometimes different, so registers get
allocated in a different order. Capture the names only where this
occurs.
- Add -verify-machineinstrs to some tests where it works. It doesn't
work everywhere it should yet.
- Add -fast-isel-abort to many tests that didn't have it before.
- Split out the VarArg test from fast-isel-call.ll into its own
test. This simplifies test setup because of --check-prefix.
Patch by JF Bastien
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181801 91177308-0d34-0410-b5e6-96231b3b80d8
The GNU assembler treats things like:
brasl %r14, 100
in the same way as:
brasl %r14, .+100
rather than as a branch to absolute address 100. We implemented this in
LLVM by creating an immediate operand rather than the usual expr operand,
and by handling immediate operands specially in the code emitter.
This was undesirable for (at least) three reasons:
- the specialness of immediate operands was exposed to the backend MC code,
rather than being limited to the assembler parser.
- in disassembly, an immediate operand really is an absolute address.
(Note that this means reassembling printed disassembly can't recreate
the original code.)
- it would interfere with any assembly manipulation that we might
try in future. E.g. operations like branch shortening can change
the relative position of instructions, but any code that updates
sym+offset addresses wouldn't update an immediate "100" operand
in the same way as an explicit ".+100" operand.
This patch changes the implementation so that the assembler creates
a "." label for immediate PC-relative operands, so that the operand
to the MCInst is always the absolute address. The patch also adds
some error checking of the offset.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181773 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds alias for addiu instruction which enables following syntax:
addiu $rs,imm
The macro is translated as:
addiu $rs,$rs,imm
Contributer: Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181729 91177308-0d34-0410-b5e6-96231b3b80d8
The issue was that the MatchingInlineAsm and VariantID args to the
MatchInstructionImpl function weren't being set properly. Specifically, when
parsing intel syntax, the parser thought it was parsing inline assembly in the
at&t dialect; that will never be the case.
The crash was caused when the emitter tried to emit the instruction, but the
operands weren't set. When parsing inline assembly we only set the opcode, not
the operands, which is used to lookup the instruction descriptor.
rdar://13854391 and PR15945
Also, this commit reverts r176036. Now that we're correctly parsing the intel
syntax the pushad/popad don't match properly. I've reimplemented that fix using
a MnemonicAlias.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181620 91177308-0d34-0410-b5e6-96231b3b80d8
This commit implements the AsmParser for fnstart, fnend,
cantunwind, personality, handlerdata, pad, setfp, save, and
vsave directives.
This commit fixes some minor issue in the ARMELFStreamer:
* The switch back to corresponding section after the .fnend
directive.
* Emit the unwind opcode while processing .fnend directive
if there is no .handlerdata directive.
* Emit the unwind opcode to .ARM.extab while processing
.handlerdata even if .personality directive does not exist.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181603 91177308-0d34-0410-b5e6-96231b3b80d8
This patch extends test/MC/PowerPC/ppc64-fixups.s to not only check for
the correct fixup type in the --show-encoding output, but also runs the
generated object file through llvm-readobj -r and verifies that the
correct ELF relocation records were generated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181453 91177308-0d34-0410-b5e6-96231b3b80d8
The reference encoding is correct, but written in the wrong byte order (these are Thumb tests, while the reference is in ARM byte order).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181420 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds support for PowerPC platform-specific variant
kinds in MCSymbolRefExpr::getVariantKindForName, and also
adds a test case to verify they are translated to the appropriate
fixup type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181053 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds a couple of Book II instructions (isync, icbi) to the
PowerPC assembler parser. These are needed when bootstrapping clang
with the integrated assembler forced on, because they are used in
inline asm statements in the code base.
The test case adds the full list of Book II storage control instructions,
including associated extended mnemonics. Again, those that are not yet
supported as marked as FIXME.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181052 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds infrastructure to support extended mnemonics in the
PowerPC assembler parser. It adds support specifically for those
extended mnemonics that LLVM will itself generate.
The test case lists *all* extended mnemonics according to the
PowerPC ISA v2.06 Book I, but marks those not yet supported
as FIXME.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181051 91177308-0d34-0410-b5e6-96231b3b80d8
This adds assembler parser support to the PowerPC back end.
The parser will run for any powerpc-*-* and powerpc64-*-* triples,
but was tested only on 64-bit Linux. The supported syntax is
intended to be compatible with the GNU assembler.
The parser does not yet support all PowerPC instructions, but
it does support anything that is generated by LLVM itself.
There is no support for testing restricted instruction sets yet,
i.e. the parser will always accept any instructions it knows,
no matter what feature flags are given.
Instruction operands will be checked for validity and errors
generated. (Error handling in general could still be improved.)
The patch adds a number of test cases to verify instruction
and operand encodings. The tests currently cover all instructions
from the following PowerPC ISA v2.06 Book I facilities:
Branch, Fixed-point, Floating-Point, and Vector.
Note that a number of these instructions are not yet supported
by the back end; they are marked with FIXME.
A number of follow-on check-ins will add extra features. When
they are all included, LLVM passes all tests (including bootstrap)
when using clang -cc1as as the system assembler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181050 91177308-0d34-0410-b5e6-96231b3b80d8
"hint" space for Thumb actually overlaps the encoding space of the CPS
instruction. In actuality, hints can be defined as CPS instructions where imod
and M bits are all nil.
Handle decoding of permitted nop-compatible hints (i.e. nop, yield, wfi, wfe,
sev) in DecodeT2CPSInstruction.
This commit adds a proper diagnostic message for Imm0_4 and updates all tests.
Patch by Mihail Popa <Mihail.Popa@arm.com>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180617 91177308-0d34-0410-b5e6-96231b3b80d8
Mips have delayslots for certain instructions
like jumps and branches. These are instructions
that follow the branch or jump and are executed
before the jump or branch is completed.
Early Mips compilers could not cope with delayslots
and left them up to the assembler. The assembler would
fill the delayslots with the appropriate instruction,
usually just a nop to allow correct runtime behavior.
The default behavior for this is set with .set reorder.
To tell the assembler that you don't want it to mess with
the delayslot one used .set noreorder.
For backwards compatibility we need to support
.set reorder and have it be the default behavior in the
assembler.
Our support for it is to insert a NOP directly after an
instruction with a delayslot when in .set reorder mode.
Contributer: Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180584 91177308-0d34-0410-b5e6-96231b3b80d8
unable to handle cases such as __asm mov eax, 8*-8.
This patch also attempts to simplify the state machine. Further, the error
reporting has been improved. Test cases included, but more will be added to
the clang side shortly.
rdar://13668445
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179719 91177308-0d34-0410-b5e6-96231b3b80d8
The reference manual defines only 5 permitted values for the immediate field of the "hint" instruction:
1. nop (imm == 0)
2. yield (imm == 1)
3. wfe (imm == 2)
4. wfi (imm == 3)
5. sev (imm == 4)
Therefore, restrict the permitted values for the "hint" instruction to 0 through 4.
Patch by Mihail Popa <Mihail.Popa@arm.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179707 91177308-0d34-0410-b5e6-96231b3b80d8
This patch allows the Mips assembler to parse and emit nested
expressions as instruction operands. It also extends the
expansion of memory instructions when an offset is given as
an expression.
Contributer: Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179657 91177308-0d34-0410-b5e6-96231b3b80d8
These are aliases for VACGT and VACGE, respectively, with the source
operands reversed.
rdar://13638090
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179575 91177308-0d34-0410-b5e6-96231b3b80d8
