Remove handling for DW_TAG_constant. We started producing it in
r110656, but reverted that in r110876 without dropping the support.
Finish the job.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228623 91177308-0d34-0410-b5e6-96231b3b80d8
These tests the two optimizations for backedge insertion currently implemented and the split backedge flag which is currently off by default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228617 91177308-0d34-0410-b5e6-96231b3b80d8
This is just adding really simple tests which should have been part of the original submission. When doing so, I discovered that I'd mistakenly removed required pieces when preparing the patch for upstream submission. I fixed two such bugs in this submission.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228610 91177308-0d34-0410-b5e6-96231b3b80d8
When creating a scev for sext({X,+,Y}), scev checks if the expression
is equivalent to {sext X,+,zext Y}. If it can prove that, it also
tags the original {X,+,Y} as <nsw>, which is not correct.
In the test case I run `-scalar-evolution` twice because the bug
manifests only once SCEV has run through and seen the `sext`
expressions (and then does a in-place mutation on {X,+,Y}).
Differential Revision: http://reviews.llvm.org/D7495
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228586 91177308-0d34-0410-b5e6-96231b3b80d8
veqv (vector equivalence)
vnand
vorc
I increased the AddedComplexity for these instructions to 500 to ensure they are generated instead of issuing other VSX instructions.
Phabricator review: http://reviews.llvm.org/D7469
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228580 91177308-0d34-0410-b5e6-96231b3b80d8
For the attached test case different types are used in the ICmpInst
and SelectInst that represent the min/max expressions. However, if the
ICmpInst type is smaller a comparison with the sign/zero extended
operands would have yielded the same result. This situation might
arise after the instruction combination pass was applied.
Differential Revision: http://reviews.llvm.org/D7338
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228572 91177308-0d34-0410-b5e6-96231b3b80d8
wrong basic block.
This would happen when the result of an invoke was used by a phi instruction
in the invoke's normal destination block. An instruction to reload the invoke's
value would get inserted before the critical edge was split and a new basic
block (which is the correct insertion point for the reload) was created. This
commit fixes the bug by splitting the critical edge before all the reload
instructions are inserted.
Also, hoist up the code which computes the insertion point to the only place
that need that computation.
rdar://problem/15978721
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228566 91177308-0d34-0410-b5e6-96231b3b80d8
Some parts of DeadArgElim were only considering the individual fields
of StructTypes separately, but others (where insertvalue &
extractvalue instructions occur) also looked into ArrayTypes.
This one is an actual bug; the mismatch can lead to an argument being
considered used by a return sub-value that isn't being tracked (and
hence is dead by default). It then gets incorrectly eliminated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228559 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, a non-extractvalue use of an aggregate return value meant
the entire return was considered live (the algorithm gave up
entirely). This was correct, but conservative. It's better to actually
look at that Use, making the analysis results apply to all sub-values
under consideration.
E.g.
%val = call { i32, i32 } @whatever()
[...]
ret { i32, i32 } %val
The return is using the entire aggregate (sub-values 0 and 1). We can
still simplify @whatever if we can prove that this return is itself
unused.
Also unifies the logic slightly between aggregate and non-aggregate
cases..
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228558 91177308-0d34-0410-b5e6-96231b3b80d8
add recurrences don't overflow.
This change makes the optimization more restrictive. It still assumes
that an overflowing `add nsw` is undefined behavior; and this change
will need revisiting once we have a consistent semantics for poison
values.
Differential Revision: http://reviews.llvm.org/D7331
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228552 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The alias.scope metadata represents sets of things an instruction might
alias with. When generically combining the metadata from two
instructions the result must be the union of the original sets, because
the new instruction might alias with anything any of the original
instructions aliased with.
Reviewers: hfinkel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7490
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228525 91177308-0d34-0410-b5e6-96231b3b80d8
While various DAG combines try to guarantee that a vector SETCC
operation will have the same output size as input, there's nothing
intrinsic to either creation or LegalizeTypes that actually guarantees
it, so the function needs to be ready to handle a mismatch.
Fortunately this is easy enough, just extend or truncate the naturally
compared result.
I couldn't reproduce the failure in other backends that I know have
SIMD, so it's probably only an issue for these two due to shared
heritage.
Should fix PR21645.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228518 91177308-0d34-0410-b5e6-96231b3b80d8
Turns out there is a simpler way of checking that all bytes in a word are equal
than binary decomposition.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228503 91177308-0d34-0410-b5e6-96231b3b80d8
different fields.
We can show that two GEPs off of the same (possibly multidimensional)
array of structs, into different fields, can't alias. Quoting:
For two GEPOperators GEP1 and GEP2, if we find that:
- both GEPs begin indexing from the exact same pointer;
- the last indices in both GEPs are constants, indexing into a struct;
- said indices are different, hence,the pointed-to fields are different;
- and both GEPs only index through arrays prior to that;
this lets us determine that the struct that GEP1 indexes into and the
struct that GEP2 indexes into must either precisely overlap or be
completely disjoint. Because they cannot partially overlap, indexing
into different non-overlapping fields of the struct will never alias.
The other BasicAA::aliasGEP rules worked in some cases, but not all
(for example, the i32x3 struct in the testcase).
We can add this simple ad-hoc rule to complement them.
rdar://19717375
Differential Revision: http://reviews.llvm.org/D7453
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228498 91177308-0d34-0410-b5e6-96231b3b80d8
General boolean instructions (AND, ANDN, OR, XOR) need to use a specific domain instruction (and not just the default).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228495 91177308-0d34-0410-b5e6-96231b3b80d8
COFF section flags are not idempotent:
'rd' will make a read-write section because 'd' implies write
'dr' will make a read-only section because 'r' disables write
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228490 91177308-0d34-0410-b5e6-96231b3b80d8
If a loop predecessor has an invoke as its terminator, and the return value
from that invoke is used to determine the loop iteration space, then we can't
insert a computation based on that value in the loop predecessor prior to the
terminator (oops). If there's such an invoke, or just no predecessor for that
matter, insert a new loop preheader.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228488 91177308-0d34-0410-b5e6-96231b3b80d8
Unfortunately, even with the workaround of disabling the linker TLS
optimizations in Clang restored (which has already been done), this still
breaks self-hosting on my P7 machine (-O3 -DNDEBUG -mcpu=native).
Bill is currently working on an alternate implementation to address the TLS
issue in a way that also fully elides the linker bug (which, unfortunately,
this approach did not fully), so I'm reverting this now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228460 91177308-0d34-0410-b5e6-96231b3b80d8
Remove unnecessary restriction of 24-bits for line numbers in
`MDLocation`.
The rest of the debug info schema (with the exception of local
variables) uses 32-bits for line numbers. As I introduce the
specialized nodes, it makes sense to canonicalize on one size or the
other.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228455 91177308-0d34-0410-b5e6-96231b3b80d8
An atomic store always make the target location fully initialized (in the
current implementation). It should not store origin. Initialized memory can't
have meaningful origin, and, due to origin granularity (4 bytes) there is a
chance that this extra store would overwrite meaningfull origin for an adjacent
location.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228444 91177308-0d34-0410-b5e6-96231b3b80d8
Normalize
select(C0, select(C1, a, b), b) -> select((C0 & C1), a, b)
select(C0, a, select(C1, a, b)) -> select((C0 | C1), a, b)
This normal form may enable further combines on the And/Or and shortens
paths for the values. Many targets prefer the other but can go back
easily in CodeGen.
Differential Revision: http://reviews.llvm.org/D7399
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228409 91177308-0d34-0410-b5e6-96231b3b80d8
Doesn't seem necessary anymore. I think this was mostly compensating for
not enabling WQM for texture sampling instructions.
v2: Add test coverage
Reviewed-by: Tom Stellard <tom@stellard.net>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228373 91177308-0d34-0410-b5e6-96231b3b80d8
If whole quad mode isn't enabled for these, the level of detail is
calculated incorrectly for pixels along diagonal triangle edges, causing
artifacts.
v2: Use a TSFlag instead of lots of switch cases
v3: Add test coverage
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88642
Reviewed-by: Tom Stellard <tom@stellard.net>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228372 91177308-0d34-0410-b5e6-96231b3b80d8
Since testing the function indirectly is tricky, introduce a direct
print-memderefs pass, in the same spirit as print-memdeps, which prints
dereferenceability information matched by FileCheck.
Differential Revision: http://reviews.llvm.org/D7075
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228369 91177308-0d34-0410-b5e6-96231b3b80d8
Avoid the creation of select instructions which can result in different
scheduling of the selects.
I also added a bunch of additional store volatiles. Those avoid A
CodeGen problem (bug?) where normalizes and denomarlizing the control
moves all shift instructions into the first block where ISel can't match
them together with the cmps.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228362 91177308-0d34-0410-b5e6-96231b3b80d8
Use FileCheck, make it more consistent and do not rely on unoptimized
or(cmp,cmp) getting combined for max to be matched.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228361 91177308-0d34-0410-b5e6-96231b3b80d8
Fixes PR22462: two of the tests have regressed for a while,
but were using CHECK-NOT to match "May:". The actual output
was changed to "MayAlias:" at some point, which made the tests
useless.
Two others return MayAlias only because of a lack of analysis;
BasicAA returns PartialAlias in those cases, when a datalayout
is present.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228346 91177308-0d34-0410-b5e6-96231b3b80d8
PowerPC supports pre-increment load/store instructions (except for Altivec/VSX
vector load/stores). Using these on embedded cores can be very important, but
most loops are not naturally set up to use them. We can often change that,
however, by placing loops into a non-canonical form. Generically, this means
transforming loops like this:
for (int i = 0; i < n; ++i)
array[i] = c;
to look like this:
T *p = array[-1];
for (int i = 0; i < n; ++i)
*++p = c;
the key point is that addresses accessed are pulled into dedicated PHIs and
"pre-decremented" in the loop preheader. This allows the use of pre-increment
load/store instructions without loop peeling.
A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is
introduced to perform this transformation. I've used this code out-of-tree for
generating code for the PPC A2 for over a year. Somewhat to my surprise,
running the test suite + externals on a P7 with this transformation enabled
showed no performance regressions, and one speedup:
External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk
-2.32514% +/- 1.03736%
So I'm going to enable it on everything for now. I was surprised by this
because, on the POWER cores, these pre-increment load/store instructions are
cracked (and, thus, harder to schedule effectively). But seeing no regressions,
and feeling that it is generally easier to split instructions apart late than
it is to combine them late, this might be the better approach regardless.
In the future, we might want to integrate this functionality into LSR (but
currently LSR does not create new PHI nodes, so (for that and other reasons)
significant work would need to be done).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228328 91177308-0d34-0410-b5e6-96231b3b80d8
PowerPC supports pre-increment floating-point load/store instructions, both r+r
and r+i, and we had patterns for them, but they were not marked as legal. Mark
them as legal (and add a test case).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228327 91177308-0d34-0410-b5e6-96231b3b80d8
The combine that forms extloads used to be disabled on vector types,
because "None of the supported targets knows how to perform load and
sign extend on vectors in one instruction."
That's not entirely true, since at least SSE4.1 X86 knows how to do
those sextloads/zextloads (with PMOVS/ZX).
But there are several aspects to getting this right.
First, vector extloads are controlled by a profitability callback.
For instance, on ARM, several instructions have folded extload forms,
so it's not always beneficial to create an extload node (and trying to
match extloads is a whole 'nother can of worms).
The interesting optimization enables folding of s/zextloads to illegal
(splittable) vector types, expanding them into smaller legal extloads.
It's not ideal (it introduces some legalization-like behavior in the
combine) but it's better than the obvious alternative: form illegal
extloads, and later try to split them up. If you do that, you might
generate extloads that can't be split up, but have a valid ext+load
expansion. At vector-op legalization time, it's too late to generate
this kind of code, so you end up forced to scalarize. It's better to
just avoid creating egregiously illegal nodes.
This optimization is enabled unconditionally on X86.
Note that the splitting combine is happy with "custom" extloads. As
is, this bypasses the actual custom lowering, and just unrolls the
extload. But from what I've seen, this is still much better than the
current custom lowering, which does some kind of unrolling at the end
anyway (see for instance load_sext_4i8_to_4i64 on SSE2, and the added
FIXME).
Also note that the existing combine that forms extloads is now also
enabled on legal vectors. This doesn't have a big effect on X86
(because sext+load is usually combined to sext_inreg+aextload).
On ARM it fires on some rare occasions; that's for a separate commit.
Differential Revision: http://reviews.llvm.org/D6904
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228325 91177308-0d34-0410-b5e6-96231b3b80d8
The return value's address must be returned in %rax.
i.e. the callee needs to copy the sret argument (%rdi)
into the return value (%rax).
This probably won't manifest as a bug when the caller is LLVM-compiled
code. But it is an ABI guarantee and tools expect it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228321 91177308-0d34-0410-b5e6-96231b3b80d8
We should be setting UnrollingPreferences::MaxCount to MAX_UINT instead
of UnrollingPreferences::Count.
Count is a 'forced unrolling factor', while MaxCount sets an upper
limit to the unrolling factor.
Setting Count to MAX_UINT was causing the loop in the testcase to be
unrolled 15 times, when it only had a maximum of 4 iterations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228303 91177308-0d34-0410-b5e6-96231b3b80d8
The llvm.SI.end.cf intrinsic is used to mark the end of if-then blocks,
if-then-else blocks, and loops. It is responsible for updating the
exec mask to re-enable threads that had been masked during the preceding
control flow block. For example:
s_mov_b64 exec, 0x3 ; Initial exec mask
s_mov_b64 s[0:1], exec ; Saved exec mask
v_cmpx_gt_u32 exec, s[2:3], v0, 0 ; llvm.SI.if
do_stuff()
s_or_b64 exec, exec, s[0:1] ; llvm.SI.end.cf
The bug fixed by this patch was one where the llvm.SI.end.cf intrinsic
was being inserted into the header of loops. This would happen when
an if block terminated in a loop header and we would end up with
code like this:
s_mov_b64 exec, 0x3 ; Initial exec mask
s_mov_b64 s[0:1], exec ; Saved exec mask
v_cmpx_gt_u32 exec, s[2:3], v0, 0 ; llvm.SI.if
do_stuff()
LOOP: ; Start of loop header
s_or_b64 exec, exec, s[0:1] ; llvm.SI.end.cf <-BUG: The exec mask has the
same value at the beginning of each loop
iteration.
do_stuff();
s_cbranch_execnz LOOP
The fix is to create a new basic block before the loop and insert the
llvm.SI.end.cf there. This way the exec mask is restored before the
start of the loop instead of at the beginning of each iteration.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228302 91177308-0d34-0410-b5e6-96231b3b80d8
Patch by Kit Barton.
Add the vector count leading zeros instruction for byte, halfword,
word, and doubleword sizes. This is a fairly straightforward addition
after the changes made for vpopcnt:
1. Add the correct definitions for the various instructions in
PPCInstrAltivec.td
2. Make the CTLZ operation legal on vector types when using P8Altivec
in PPCISelLowering.cpp
Test Plan
Created new test case in test/CodeGen/PowerPC/vec_clz.ll to check the
instructions are being generated when the CTLZ operation is used in
LLVM.
Check the encoding and decoding in test/MC/PowerPC/ppc_encoding_vmx.s
and test/Disassembler/PowerPC/ppc_encoding_vmx.txt respectively.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228301 91177308-0d34-0410-b5e6-96231b3b80d8
Implement a BITCAST dag combine to transform i32->mmx conversion patterns
into a X86 specific node (MMX_MOVW2D) and guarantee that moves between
i32 and x86mmx are better handled, i.e., don't use store-load to do the
conversion..
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228293 91177308-0d34-0410-b5e6-96231b3b80d8
Avoid regression in previously supported MMX code by adding different
combinations of tests which exercise MMX bitcasts. Small improvements
to these patterns should come next.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228292 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: When evaluating floating point instructions in the inliner, ask the TTI whether it is an expensive operation. By default, it's not an expensive operation. This keeps the default behavior the same as before. The ARM TTI has been updated to return back TCC_Expensive for targets which don't have hardware floating point.
Reviewers: chandlerc, echristo
Reviewed By: echristo
Subscribers: t.p.northover, aemerson, llvm-commits
Differential Revision: http://reviews.llvm.org/D6936
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228263 91177308-0d34-0410-b5e6-96231b3b80d8
The q8/d16 thing is silly; I'd be happy to hear about a better
way to write those tests where simple substitution isn't enough..
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228258 91177308-0d34-0410-b5e6-96231b3b80d8
Parts of llvm were not expecting it and we wouldn't print
the entity size of the section.
Given what comdats are used for, having SHF_MERGE sections would be
just a small improvement, so just disable it for now.
Fixes pr22463.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228196 91177308-0d34-0410-b5e6-96231b3b80d8
v2i32, i32, trunc i32 to i16, and truc i32 to i8 stores are legal for
all address spaces. We had marked them as custom in order to lower
them for the private address space, but this is no longer necessary.
This enables lowering of misaligned stores of these types in the
DAGLegalizer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228189 91177308-0d34-0410-b5e6-96231b3b80d8
We take care of this during instruction selection now. This
fixes a potential infinite loop when lowering misaligned stores.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228188 91177308-0d34-0410-b5e6-96231b3b80d8
We were previously doing a post-order traversal and operating on the
list in reverse, however this would occasionaly cause backedges for
loops to be visited before some of the other blocks in the loop.
We know use a reverse post-order traversal, which avoids this issue.
The reverse post-order traversal is not completely ideal, so we need
to manually fixup the list to ensure that inner loop backedges are
visited before outer loop backedges.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228186 91177308-0d34-0410-b5e6-96231b3b80d8
Track unresolved nodes under distinct `MDNode`s during `MapMetadata()`,
and resolve them at the end. Previously, these cycles wouldn't get
resolved.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228180 91177308-0d34-0410-b5e6-96231b3b80d8
In case CSE reuses a previoulsy unused register the dead-def flag has to
be cleared on the def operand, as exposed by the arm64-cse.ll test.
This fixes PR22439 and the corresponding rdar://19694987
Differential Revision: http://reviews.llvm.org/D7395
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228178 91177308-0d34-0410-b5e6-96231b3b80d8
This is a bug that was caused due to storing the feature bitset in a 32-bit
variable when it is a 64-bit mask, discarding the top half of the feature set.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228151 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, Cortex-A72 is modelled as an Cortex-A57 except the fp
load balancing pass isn't enabled for Cortex-A72 as it's not
profitable to have it enabled for this core.
Patch by Ranjeet Singh.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228140 91177308-0d34-0410-b5e6-96231b3b80d8
This associates movss and movsd with the packed single and packed double
execution domains (resp.). While this is largely cosmetic, as we now
don't have weird ping-pong-ing between single and double precision, it
is also useful because it avoids the domain fixing algorithm from seeing
domain breaks that don't actually exist. It will also be much more
important if we have an execution domain default other than packed
single, as that would cause us to mix movss and movsd with integer
vector code on a regular basis, a very bad mixture.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228135 91177308-0d34-0410-b5e6-96231b3b80d8
version of the script.
Changes include:
- Using the VEX prefix
- Skipping more detail when we have useful shuffle comments to match
- Matching more shuffle comments that have been added to the printer
(yay!)
- Matching the destination registers of some AVX instructions
- Stripping trailing whitespace that crept in
- Fixing indentation issues
Nothing interesting going on here. I'm just trying really hard to ensure
these changes don't show up in the diffs with actual changes to the
backend.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228132 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts patches 223862, 224198, 224203, and 224754, which were all
related to the vector load/store combining and were reverted/reaplied
a few times due to the same alignment problems we're seeing now.
Further tests, mainly self-hosting Clang, will be needed to reapply this
patch in the future.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228129 91177308-0d34-0410-b5e6-96231b3b80d8
zero for v8i16 as well.
These exhibit the same domain badness, but also exhibit other weaknesses
in our blend lowering. More fixes to come.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228126 91177308-0d34-0410-b5e6-96231b3b80d8
This is the simplest form of bit-math based blending which only fires
when we are blending with zero and is relatively profitable. I've only
enabled this path on very specific lowering strategies. I'm planning to
widen its applicability in subsequent patches, but so far you'll notice
that even though we get fewer shufps instructions, we *still* do the bit
math in the FP execution port. I'm looking into why this is still
happening.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228124 91177308-0d34-0410-b5e6-96231b3b80d8
The ARM assembler allows register alias redefinitions as long as it
targets the same register. r222319 broke that. In the AArch64 case
it would just produce a new warning, but in the ARM case it would
error out on previously accepted assembler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228109 91177308-0d34-0410-b5e6-96231b3b80d8
