For x86, if sse2 is available, it's not a good idea since cvtss2sd is slower than a movsd load and it prevents load folding. On x87, it's important to shrink fp constant since fldt is very expensive.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@47931 91177308-0d34-0410-b5e6-96231b3b80d8
same size as an int type by doing a bitconvert of
load/store of the int type (same algorithm as floating point).
This makes them work for ppc Altivec. There was some
code that purported to handle loads of (some) vectors
by splitting them into two smaller vectors, but getExtLoad
rejects subvector loads, so this could never have worked;
the patch removes it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@47696 91177308-0d34-0410-b5e6-96231b3b80d8
tblgen will complain if a sign-extended constant does not fit into a
data type smaller than i32, e.g., i16. This causes a problem when certain
hex constants are used, such as 0xff for byte masks or immediate xor
values.
tblgen will try the sign-extended value first and, if the sign extended
value would overflow, it tries to see if the unsigned value will fit.
Consequently, a software developer can now safely incant:
(XORHIr16 R16C:$rA, 0xffff)
which is somewhat clearer and more informative than incanting:
(XORHIr16 R16C:$rA, (i16 -1))
even if the two are bitwise equivalent.
Tblgen also outputs the 64-bit unsigned constant in the generated ISel code
when getTargetConstant() is invoked.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@47188 91177308-0d34-0410-b5e6-96231b3b80d8
the return value is zero-extended if it isn't
sign-extended. It may also be any-extended.
Also, if a floating point value was returned
in a larger floating point type, pass 1 as the
second operand to FP_ROUND, which tells it
that all the precision is in the original type.
I think this is right but I could be wrong.
Finally, when doing libcalls, set isZExt on
a parameter if it is "unsigned". Currently
isSExt is set when signed, and nothing is
set otherwise. This should be right for all
calls to standard library routines.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@47122 91177308-0d34-0410-b5e6-96231b3b80d8
1) ConstantFP is now expand by default
2) ConstantFP is not turned into TargetConstantFP during Legalize
if it is legal.
This allows ConstantFP to be handled like Constant, allowing for
targets that can encode FP immediates as MachineOperands.
As a bonus, fix up Itanium FP constants, which now correctly match,
and match more constants! Hooray.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@47121 91177308-0d34-0410-b5e6-96231b3b80d8
initializer problem, a minor tweak to the way the
DAGISelEmitter finds load/store nodes, and a renaming of the
new PseudoSourceValue objects.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46827 91177308-0d34-0410-b5e6-96231b3b80d8
Added ISD::DECLARE node type to represent llvm.dbg.declare intrinsic. Now the intrinsic calls are lowered into a SDNode and lives on through out the codegen passes.
For now, since all the debugging information recording is done at isel time, when a ISD::DECLARE node is selected, it has the side effect of also recording the variable. This is a short term solution that should be fixed in time.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46659 91177308-0d34-0410-b5e6-96231b3b80d8
in the backend. Introduce a new SDNode type, MemOperandSDNode, for
holding a MemOperand in the SelectionDAG IR, and add a MemOperand
list to MachineInstr, and code to manage them. Remove the offset
field from SrcValueSDNode; uses of SrcValueSDNode that were using
it are all all using MemOperandSDNode now.
Also, begin updating some getLoad and getStore calls to use the
PseudoSourceValue objects.
Most of this was written by Florian Brander, some
reorganization and updating to TOT by me.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46585 91177308-0d34-0410-b5e6-96231b3b80d8
and StoreSDNode into their common base class LSBaseSDNode. Member
functions getLoadedVT and getStoredVT are replaced with the common
getMemoryVT to simplify code that will handle both loads and stores.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46538 91177308-0d34-0410-b5e6-96231b3b80d8
precision integers. This won't actually work
(and most of the code is dead) unless the new
legalization machinery is turned on. While
there, I rationalized the handling of i1, and
removed some bogus (and unused) sextload patterns.
For i1, this could result in microscopically
better code for some architectures (not X86).
It might also result in worse code if annotating
with AssertZExt nodes turns out to be more harmful
than helpful.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46280 91177308-0d34-0410-b5e6-96231b3b80d8
integers. Handle truncstore of a legal type to an unusual
number of bits. Most of this code is not reachable unless
the new legalize infrastructure is turned on.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46249 91177308-0d34-0410-b5e6-96231b3b80d8
1. Legalize now always promotes truncstore of i1 to i8.
2. Remove patterns and gunk related to truncstore i1 from targets.
3. Rename the StoreXAction stuff to TruncStoreAction in TLI.
4. Make the TLI TruncStoreAction table a 2d table to handle from/to conversions.
5. Mark a wide variety of invalid truncstores as such in various targets, e.g.
X86 currently doesn't support truncstore of any of its integer types.
6. Add legalize support for truncstores with invalid value input types.
7. Add a dag combine transform to turn store(truncate) into truncstore when
safe.
The later allows us to compile CodeGen/X86/storetrunc-fp.ll to:
_foo:
fldt 20(%esp)
fldt 4(%esp)
faddp %st(1)
movl 36(%esp), %eax
fstps (%eax)
ret
instead of:
_foo:
subl $4, %esp
fldt 24(%esp)
fldt 8(%esp)
faddp %st(1)
fstps (%esp)
movl 40(%esp), %eax
movss (%esp), %xmm0
movss %xmm0, (%eax)
addl $4, %esp
ret
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46140 91177308-0d34-0410-b5e6-96231b3b80d8
and switch various codegen pieces and the X86 backend over
to using it.
* Add some comments to SelectionDAGNodes.h
* Introduce a second argument to FP_ROUND, which indicates
whether the FP_ROUND changes the value of its input. If
not it is safe to xform things like fp_extend(fp_round(x)) -> x.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46125 91177308-0d34-0410-b5e6-96231b3b80d8
into the ANY_EXTEND/ZERO_EXTEND/SIGN_EXTEND code to simplify it.
Unmerge the code for FP_ROUND and FP_EXTEND from each other to
make each one simpler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46061 91177308-0d34-0410-b5e6-96231b3b80d8
Likewise fix up a bunch of other libcalls. While
there I remove NEG_F32 and NEG_F64 since they are
not used anywhere. This fixes 9 Ada ACATS failures.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45833 91177308-0d34-0410-b5e6-96231b3b80d8
values, which means doing extra legalization work.
It would be easier to get this kind of thing right if
there was some documentation...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45472 91177308-0d34-0410-b5e6-96231b3b80d8
that "machine" classes are used to represent the current state of
the code being compiled. Given this expanded name, we can start
moving other stuff into it. For now, move the UsedPhysRegs and
LiveIn/LoveOuts vectors from MachineFunction into it.
Update all the clients to match.
This also reduces some needless #includes, such as MachineModuleInfo
from MachineFunction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45467 91177308-0d34-0410-b5e6-96231b3b80d8
1) Change the interface to TargetLowering::ExpandOperationResult to
take and return entire NODES that need a result expanded, not just
the value. This allows us to handle things like READCYCLECOUNTER,
which returns two values.
2) Implement (extremely limited) support in LegalizeDAG::ExpandOp for MERGE_VALUES.
3) Reimplement custom lowering in LegalizeDAGTypes in terms of the new
ExpandOperationResult. This makes the result simpler and fully
general.
4) Implement (fully general) expand support for MERGE_VALUES in LegalizeDAGTypes.
5) Implement ExpandOperationResult support for ARM f64->i64 bitconvert and ARM
i64 shifts, allowing them to work with LegalizeDAGTypes.
6) Implement ExpandOperationResult support for X86 READCYCLECOUNTER and FP_TO_SINT,
allowing them to work with LegalizeDAGTypes.
LegalizeDAGTypes now passes several more X86 codegen tests when enabled and when
type legalization in LegalizeDAG is ifdef'd out.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44300 91177308-0d34-0410-b5e6-96231b3b80d8
Fix a couple of problems:
1. Don't assume the VT-1 is a VT that is half the size.
2. Treat vectors of FP in the vector path, not the FP path.
This has a couple of remaining problems before it will work with
the code in PR1811: the code below this change assumes that it can
use extload/shift/or to construct the result, which isn't right for
vectors.
This also doesn't handle vectors of 1 or vectors that aren't pow-2.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44243 91177308-0d34-0410-b5e6-96231b3b80d8
adjustment fields, and an optional flag. If there is a "dynamic_stackalloc" in
the code, make sure that it's bracketed by CALLSEQ_START and CALLSEQ_END. If
not, then there is the potential for the stack to be changed while the stack's
being used by another instruction (like a call).
This can only result in tears...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44037 91177308-0d34-0410-b5e6-96231b3b80d8
The meaning of getTypeSize was not clear - clarifying it is important
now that we have x86 long double and arbitrary precision integers.
The issue with long double is that it requires 80 bits, and this is
not a multiple of its alignment. This gives a primitive type for
which getTypeSize differed from getABITypeSize. For arbitrary precision
integers it is even worse: there is the minimum number of bits needed to
hold the type (eg: 36 for an i36), the maximum number of bits that will
be overwriten when storing the type (40 bits for i36) and the ABI size
(i.e. the storage size rounded up to a multiple of the alignment; 64 bits
for i36).
This patch removes getTypeSize (not really - it is still there but
deprecated to allow for a gradual transition). Instead there is:
(1) getTypeSizeInBits - a number of bits that suffices to hold all
values of the type. For a primitive type, this is the minimum number
of bits. For an i36 this is 36 bits. For x86 long double it is 80.
This corresponds to gcc's TYPE_PRECISION.
(2) getTypeStoreSizeInBits - the maximum number of bits that is
written when storing the type (or read when reading it). For an
i36 this is 40 bits, for an x86 long double it is 80 bits. This
is the size alias analysis is interested in (getTypeStoreSize
returns the number of bytes). There doesn't seem to be anything
corresponding to this in gcc.
(3) getABITypeSizeInBits - this is getTypeStoreSizeInBits rounded
up to a multiple of the alignment. For an i36 this is 64, for an
x86 long double this is 96 or 128 depending on the OS. This is the
spacing between consecutive elements when you form an array out of
this type (getABITypeSize returns the number of bytes). This is
TYPE_SIZE in gcc.
Since successive elements in a SequentialType (arrays, pointers
and vectors) need to be aligned, the spacing between them will be
given by getABITypeSize. This means that the size of an array
is the length times the getABITypeSize. It also means that GEP
computations need to use getABITypeSize when computing offsets.
Furthermore, if an alloca allocates several elements at once then
these too need to be aligned, so the size of the alloca has to be
the number of elements multiplied by getABITypeSize. Logically
speaking this doesn't have to be the case when allocating just
one element, but it is simpler to also use getABITypeSize in this
case. So alloca's and mallocs should use getABITypeSize. Finally,
since gcc's only notion of size is that given by getABITypeSize, if
you want to output assembler etc the same as gcc then getABITypeSize
is the size you want.
Since a store will overwrite no more than getTypeStoreSize bytes,
and a read will read no more than that many bytes, this is the
notion of size appropriate for alias analysis calculations.
In this patch I have corrected all type size uses except some of
those in ScalarReplAggregates, lib/Codegen, lib/Target (the hard
cases). I will get around to auditing these too at some point,
but I could do with some help.
Finally, I made one change which I think wise but others might
consider pointless and suboptimal: in an unpacked struct the
amount of space allocated for a field is now given by the ABI
size rather than getTypeStoreSize. I did this because every
other place that reserves memory for a type (eg: alloca) now
uses getABITypeSize, and I didn't want to make an exception
for unpacked structs, i.e. I did it to make things more uniform.
This only effects structs containing long doubles and arbitrary
precision integers. If someone wants to pack these types more
tightly they can always use a packed struct.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43620 91177308-0d34-0410-b5e6-96231b3b80d8
of offset and the alignment of ptr if these are both powers of
2. While the ptr alignment is guaranteed to be a power of 2,
there is no reason to think that offset is. For example, if
offset is 12 (the size of a long double on x86-32 linux) and
the alignment of ptr is 8, then the alignment of ptr+offset
will in general be 4, not 8. Introduce a function MinAlign,
lifted from gcc, for computing the minimum guaranteed alignment.
I've tried to fix up everywhere under lib/CodeGen/SelectionDAG/.
I also changed some places that weren't wrong (because both values
were a power of 2), as a defensive change against people copying
and pasting the code.
Hopefully someone who cares about alignment will review the rest
of LLVM and fix up the remaining places. Since I'm on x86 I'm
not very motivated to do this myself...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43421 91177308-0d34-0410-b5e6-96231b3b80d8
To do this it is necessary to add a "always inline" argument to the
memcpy node. For completeness I have also added this node to memmove
and memset. I have also added getMem* functions, because the extra
argument makes it cumbersome to use getNode and because I get confused
by it :-)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43172 91177308-0d34-0410-b5e6-96231b3b80d8
types. This is needed for SIGN_EXTEND_INREG at least.
It is not clear if this is correct for other operations.
On the other hand, for the various load/store actions
it seems to correct to return the type action, as is
currently done.
Also, it seems that SelectionDAG::getValueType can be
called for extended value types; introduce a map for
holding these, since we don't really want to extend
the vector to be 2^32 pointers long!
Generalize DAGTypeLegalizer::PromoteResult_TRUNCATE
and DAGTypeLegalizer::PromoteResult_INT_EXTEND to handle
the various funky possibilities that apints introduce,
for example that you can promote to a type that needs
to be expanded.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43071 91177308-0d34-0410-b5e6-96231b3b80d8
Make two changes:
1) only xform "store of f32" if i32 is a legal type for the target.
2) only xform "store of f64" if either i64 or i32 are legal for the target.
3) if i64 isn't legal, manually lower to 2 stores of i32 instead of letting a
later pass of legalize do it. This is ugly, but helps future changes I'm
about to commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@42980 91177308-0d34-0410-b5e6-96231b3b80d8
Factor out the code that expands the "nasty scalar code" for unrolling
vectors into a separate routine, teach it how to handle mixed
vector/scalar operands, as seen in powi, and use it for several operators,
including sin, cos, powi, and pow.
Add support in SplitVectorOp for fpow, fpowi and for several unary
operators.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@42884 91177308-0d34-0410-b5e6-96231b3b80d8
No compile-time support for constant operations yet,
just format transformations. Make readers and
writers work. Split constants into 2 doubles in
Legalize.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@42865 91177308-0d34-0410-b5e6-96231b3b80d8
use ISD::{S,U}DIVREM and ISD::{S,U}MUL_HIO. Move the lowering code
associated with these operators into target-independent in LegalizeDAG.cpp
and TargetLowering.cpp.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@42762 91177308-0d34-0410-b5e6-96231b3b80d8
input. APInt unfortunately zero-extends signed integers, so Dale
modified the function to expect zero-extended input. Make this
assumption explicit in the function name.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@42732 91177308-0d34-0410-b5e6-96231b3b80d8
