. don't load floppy/harddisk images (in Registry's Config) if also loading a save-state via cmd-line.
. done to prevent MessageBox alerts when deleted disk images can't be found.
Info: Registry contains refs to disk images, but on test clean-up, the images get deleted.
Support VidHD in slot 3 (via Config GUI or '-s3 vidhd') for SHR video modes only.
- AppleWin window is slightly enlarged when VidHD card is inserted.
Support IIgs 320x200 (and fill mode) and 640x200 video modes.
Debugger: add 'shr' command to view video
CUI: Allow user to specify width & height (for full-screen); and allow separate x,y scaling in full-screen mode.
. Add user-protection when unchecking HDD controller (as images aren't restored on a 'cancel')
. Fix possible crash when removing (via Config->Disk) either Disk2 card(s5) or HDD card(s7), then cancelling during emulation
. Fix m_buf[] size
Extend LBR so that it includes the control-flow on a taken interrupt
Add a new command 'brkint <0|1>' to support Break on Interrupt
Internal: in core emulation loop, moved IRQ/NMI check to start of loop so that just the "interrupt vectoring" case can be single-stepped (instead of previously opcode + interrupt vector).
Debugger help chm: update Breakpoints section to include BRK, BRKOP and BRKINT
Initially all cards are removed before loading save-state.
Use new Registry "Configuration/Slot 2" location to save SSC's port name.
Use new Registry "Configuration/Slot 7" location to save HDV's image names.
Use new Registry "Configuration/Slot n" (and "Configuration/Slot Auxiliary") locations to save all other card types.
Command line: -s<slot> (eg. -s7 empty) now get persisted to the Registry.
Only update 'HDV Starting Directory' for slot7 & drive1.
Support these new cards in slots 3, 4 or 5; based on code from Lukazi.
- extend Configuration's Input prop sheet page.
- add save/load snapshot for both cards.
- add command line switch for alt controller type (for SNES MAX card).
Change to using Registry's 'Configuration\Slot 3' for slot 3 cards (Uthernet, 4Play & SNES MAX).
Update help doc.
Change to using Registry's 'Configuration\Slot n' for disk ii image pathnames (was 'Preferences').
Delete Registry's 'Configuration\Slot n' section each time there's a change of card.
Add same functionality to conf.ini.
LoadConfiguration(): load from the new Slot-n section (or otherwise the old legacy key).
Only update Registry's 'Starting Directory' for s6,d1.
Update help doc.
. NB. whenever switching back to non-full-screen, then it will restore the default desktop resolution.
. Allow -no-full-screen to be placed before -fs-height=<best|nnnn> (previously it only worked when placed afterwards)
* Make Uthernet settings behave like all other cards.
Fix as well the fact that the Uthernet interface would not be reapplied after a restart.
* Uthernet: use consistent types to reduce code complexity.
Use std::string everywhere.
. cmd-line (-swap-buttons) or GUI "Swap 0/1" now swaps buttons 0/1 for all devices
. ie. Open/Solid Apple keys, real joystick, mouse or Num Pad keys
+ update the docs
Improve WOZ support for WL and LOA (#930)
- After T$00,S$00 (for certain 4&4 encodings) randomly skip 1 bit-cell
- Remove the previous fix for WL/LOA which was affecting other titles
New class for SSI263 (2 instances per MB/Phasor card)
- support 2nd SSI263 at $Cn20 connected to 6522-A (at $Cn00)
Switch from one-shot phoneme playback to ring-buffer
Use a new dedicated ring-buffer (distinct from the AY8910 ring buffer)
Gets rid of: SSI263Thread, the 2 events, and the 64 voices
Support the 2-bit Duration b7:6 of phoneme register for both SC01 & SSI263 (to fix#929)
Updated save-state
Updated IRQ logging (output cycle & 6522 source)
This reduces the chances of incompatibility between gcc and vs.
99% is "const char *" literals.
1 case of a goto jumping over a variable declaration (but it is not needed).
. simplify the interface FrameBase to make it easier to implement it for different cases (remove HDC and make parameters more explicit)
. remove functions which are only called on a Win32Frame (in which case a cast is guaranteed to succeed)
. otherwise there is the risk that every FrameBase implementation wants to add its own variants.
. FrameBase::FrameRefreshStatus() simplify implementation: pass all flags explicitly
* Video / FrameBase: move arch specific code to FrameBase.
* Video::Initialize & SetFrameBuffer.
Ensure initialization and SetBuffer can only happen in the right order.
* Video: move virtual functions to FrameBase.
With these changes all the virtual functions are in FrameBase and Video gets closer to be (only) the Apple ][ Video device.
* Move a few more functions from Video to FrameBase (snapshot related)
Now, the inclusion is one way with Video *not* including FrameBase.
* FrameBase::VideoRefreshScreen move Video related code to Video.
And only leave management to FrameBase.
Here are a few changes to make 64-bit build possible.
The changes are mainly to use windows api in the correct way that works for both 32-bit and 64-bit builds.
* WinVideo: move some generic functions back to Video.
Introduce a new virtual function (VideoPresentScreen) to draw the video buffer to video memory.
* Move Win32Frame::VideoRedrawScreen() to FrameBase as it is generic.
* Fix GCC build.
1) do not fwd declare enums
2) include only base class header file IPropertySheet.
* DSInit(): make sure sound devices are cleaned before the 2nd call.
And use std::string to avoid need of memory management.
. class hierarchy: WinVideo IS_A Video (ie. WinVideo is a subclass of Video)
. GetVideo() singleton instance of WinVideo in AppleWin.cpp, exposed via Interface.h
. NB, the Microsoft SDK 7.1A doesn't contain dxguid.lib & ddraw.lib, so they are linked against these two dx libs that are already part of the AppleWin repo.
* Interface.h: ensure that functions in the interface are not exported by other header files.
This is generally harmless, except for the presence of default arguments, in which case the version with default arguments must come first.
To avoid the issue, these functions are only ever exported in the Interface.h header file.
This is not complete as header files from Windows/.. are still included in:
Keyboard.cpp
SerialComms.cpp
Joystick.cpp
But probably these are arch specific and will have to be completely reimplemented elsewhere.
. Do not include alarm.h as it is not needed.
The code in alarm.h is not complete: all the extern functions are missing and different linkers might complain about this.
. Do not redefine some windows.h types in VICE/types.h as it becomes harder to keep them consistent.
Biggest problem is DWORD_IS_LONG as the best way to define it in linux 64 bit is as an int. Prefer to use StdAfx.h.
1. Newer VC runtime stat(), when using 32-bit file size, returns error
if file size is >2G. For file existence check, using 64-bit file
size is more accurate as files bigger than 2G would be reported as
non-existing otherwise.
2. <sys/stat.h> is required for VS2013 or before.
. Split AppleWin -> Core with the functionality really needed by the emulator.
. Split AppleWin -> Utilities for generic code not called by other emulator components.
. Split AppleWin -> CmdLine for the command line option parsing.
Split MouseInterface to isolate DirectInput code.
Avoid overflow in platforms where RAND_MAX is a big integer constant.
Fix include files for gcc (where enums cannot be forward declared).
Fixed debugger main "data" window behaviour:
. When activating the main data display ("data" command) the cursor keys wouldn't work until the minidump ("md1") was also enabled. NB. The cursor keys should work in the main data window, independently of whether the minidump is active.
Whenever harddisks/disks are inserted (or removed) and *if path has changed* then:
. Then the internal save-state's path & filename will be updated to reflect the new defaults.
. LoadConfiguration(): Read the save-state pathname from Registry before harddisks/disks.
Also:
. CiderPress: only save pathname on OK.
. Refactored CPropertySheetHelper::BrowseToFile().
. Extended support for -d1,-d2,-h1, etc such that if the param is "", then it will eject/unplug the disk/harddisk.
And fix two general issues:
- confusing behavior when entering the builtin (mini) assembler mode,
- and also fixes the "cl" (clear flag) command - which was documented, but did not work at all (due to an "interesting" command/syntax conflict...).
Switched Mockingboard/6522 Timer interrupts & Mousecard's VBlank interrupt to use synchronous events.
This is a linked-list of ordered timer-based event, where only the head of the list needs updating after every opcode.
Video mode: "Color (RGB Card/Monitor)"
. RGB HGR rendering (no half-dot-shift, no vertical blend)
. RGB DHGR rendering
- Color 140-mode is a real 140x192 mode with no color fringe (Video7 patent, shows that way on real hardware)
- Mixed mode: correct transition for Color 140-mode <-> B&W (validated on a real IIc adapter.)
. Complete Féline support (eg. 2 distinct greys)
. Fixed Video7 SL7 inverse text
. Fixed DHIRES mixed mode detection
. NB. Prince of Persia will switch to B&W (560-mode) when going from HGR back to DHGR (same on real hardware).
Video mode: "Color (Composite Idealized)"
. Previously this was "Color (RGB Monitor)" (and before that, the AppleWin 1.25 "Color (Standard)")
. Now this mode does not support the extra RGB cards' video modes
Currently only Apple Color Card and Video7 SL7 are supported.
The RGB card can be defined through the command-line:
-rgb-card-type: apple (default), sl7, eve, feline
The default text color can be modified when SL7 is selected. On the actual card this was defined by dip switches.
-rgb-card-foreground <color>
can be 6 (blue), 9 (amber), 12 (green) and white (15)
Details:
. Added RGB FG/BG Text + mixed GR mode
. Added Color Text80
. Added Duochrome HGR
. RGB card defaults to Apple Color Card + B&W text
Removed 65d02.h and reconstructed this code using a combination of existing 6502.h/65c02.h and extra C Pre-Processor macros to include (or omit) the extra heatmap functionality.
We still end up with a normal 65c02 instance and also a debug 65c02 instance, but both will derive from the same 65c02.h file (+ same for the 6502 normal/debug instances).
Also:
. Added cpu_heatmap.inl for the built-in debugger's read/write operations.
. Support CpuRead/Write() from Z80 to hook the heatmap r/w.
. It's an Apple II plus clone.
. The 48K bank-switched Rom is controlled with AN0 and AN1.
. The character generation video Rom has two full character sets: English and German (F10 to switch).
NB. At the prompt, "TEST" runs the ROM self-test.
* Add missing Riff.h include and fix const correctness of arguments.
* Cosmetic improvements to Perf breakdown in LogPerfTimings().
* Logging - removed unnecessary cast.
. FT demo MAD2.DSK - original version now correctly crashes at start of full-screen scroller
. FT demo MADEF.DSK - graphics glitch on vertical edge where it transitions from GR to HGR mode
Removed very slow BitBlt() GDI calls in PrintGlyph() - now 18x faster in Release config!
. Replaced GDI call FillRect() with new FillBackground()
. Added missing bitmap declarations in GetDebuggerMemDC()
Fixed AdditionalIncludeDirectories for Debugger source files
. During init: only need to call IoHandlerCardsOut() when loading save-state
. MemInitialize() -> MemReset() -> ResetPaging() which always inits memmode
. Due to INTCXROM still being set and it not being excluded when in II+ mode.
. Fix is to reinit memmode on restart and only check INTCXROM if IIe or above.
. support relative paths (#663)
. updated the current directory with the path for each loaded image (#663) & saving state (#691)
. added a new switch -current-dir <path>
. Improved DEVICE_SELECT' I/O support (including Echo+).
. SSI263_Read() only for Phasor in Phasor mode.
. save-state: v6 (Phasor unit): phasor mode extended.
SSI263 (MB/Phasor) bug fix for when RESET/Power-cycle during phoneme playback.
Logging:
. improved for SSI263
. in CPU.cpp, added 'IRQ' / 'ISR-end'
. The auto-switch is done on each reset, or on inserting a disk at the start-up screen (MODE_LOGO).
. The Window's title include '(S6-13)' if DiskII card has 13-sector f/w.
. The debugger's 'disk info' cmd will show FW13 or FW16 depending on f/w.
This change adds the `-conf` switch which, if specified, will use an
INI-file instead of the Windows Registry.
This addresses AppleWin/AppleWin#709 and AppleWin/AppleWin#446.
Also:
- Allow creation of a blank (WOZ2) image
- multi-zip support extended to scan for the first valid image (useful for most woz-a-day zips which have at least 2 entries and were previously failing)
. Display MessageBox with all unsupported commands that were passed in.
. MessageBox yes/no response will either continue or exit AppleWin.
Changed -left-control-alt-buttons to -left-alt-control-buttons (for consistency with -right-alt-control-buttons) (#743)
. The MessageBox will now confirm whether you typed it correctly or not.
Fixed DHIRESON/OFF typo in comment!
. added GetRef(), which can throw a std::runtime_error
. NB. dynamic_cast for a reference will throw a std::bad_cast error on failure
Added try/catch around main VM restart loop
. split the loop into ProcessCmdLine(), GetAppleWinVersion(), OneTimeInitialization() RepeatInitialization() & Shutdown()
. catch std::runtime_error & std::exception
Support 2nd Disk][ in slot-5, via command line:
- -s5 diskii
- -s5d1 \<imagefile\>
- -s5d2 \<imagefile\>
NB. there's currently no Configuration UI support, except the Drive icons' tooltips show what's in slot-5 & slot-6 (for drive-n). So there's no way to eject the disks or insert new disks. The use-case I'm supporting it Wasteland which just has the 4 disks in the 4 drives.
Improved card management:
- Added `class Card` (in Card.h) which all other cards (that exist as classes) derive from (eg. LC,SSC,Mouse,Disk2).
- Added `class CardManager` (in CardManager.cpp\h) which now manages the 8 slots (and aux slot).
- Added `class Disk2CardManager` (in Disk2CardManager.cpp\h) which provides methods for operations that act on all Disk2 instances at the same time.
- Currently limited to just 1x SSC and 1x Mouse card (why would you need more?). This simplifies things, meaning there's no need to have dedicated SSCManager / MouseCardManager objects.
- Currently the 2nd Disk2 card can only be put into slot-5. This limitation is just due to the complexity of the Configuration UI. Having a more general drop-down per slot UI would remove this limitation.
. 6502 interrupt delays 1 opcode when interrupt occurs on last cycle of opcode (#724).
. Only 1-cycle delay for VF_TEXT & VF_MIXED mode changes (#656).
NB. Mad Effect 1 still has a bit of flicker on Space Invader (left edge)
ImageInfo is not a POD and cannot simply be initialised with ZeroMemory()
. the std::string constructor must be called.
. ImageInfo: simplify code using new / delete vs VirtualAlloc
Also fixed mismatching new / delete [] reported by valgrind
. Changed to 6522.TIMER underflowing at 0x0000 -> 0xFFFF (#652)
. Changed MB_Update() to be based on cycle delta (was TIMER1 interval)
. this improves support for small 6522.T1C interval
. removed MB_GetFramePeriod()
. removed overly-complex dual-timer support
. Replaced MB_EndOfVideoFrame() with MB_PeriodicUpdate()
. moved vert,horz onto same row
. made hex & apple modes the default display config
. added 2nd line showing cycles
. moved mini-mem views over by 1 char
. set m_headWindow = 0, after >50 bitcell gap
. bias fake bits to be ~30% chance of a 1 bit
Disk logging:
. added timestamps to I/O accesses
. DumpTrackWOZ() now outputs sync bits between nibbles
This change does two things:
1. Updates the registry APIs to reduce the likelihood of uninitialized
variables.
The code wasn't always checking the return value of registry load operations.
In some cases, this led to uninitialized memory being used, and crashes could
result. For example, LoadConfiguration in Applewin.cpp was using an
uninitialized value for the computer type if no registry variable for the
"Apple 2 type" was set.
New registry reading methods and macros have also been introduced, allowing
default value fallbacks for the cases where a registry variable is not found.
This makes registry access simpler and safer when a default value is known in
advance.
The registry code's style has also been updated to conform with the rest of
the code base (tabs instead of spaces, naming conventions, etc.)
2. Introduces string safety improvements.
A number of code paths have been modified to use safe-string functions instead
of their unsafe counterparts (e.g., strcpy, sprintf). In the process, some
strings were converted from "char" to "TCHAR". This was done mostly for
consistency with the rest of the code-base.
Supports:
- all "woz test images" v1.3 (WOZ1, WOZ2) are working, except 3.5"
- additionally: Frogger (spiradisc), Choplifter (not Enhanced //e!), Lode Runner, Marble Madness, Skyfox.
- woz images can be .gz or .zip compressed (ie. same as other supported images)
- save-state
Limitations:
- read-only, so WOZ images are forced to be write-protected
. as a result, games that need r/w images won't work (Stickybear Town Builder, Wizardry)
- 5.25" only (not 3.5")
- Added Configuration GUI to include checkbox for "50Hz"
- Implicitly use PAL or NTSC base 6502 clocks depending on video refresh rate
- Added new -50hz and -60hz command line switches
- Updated save-state for video refresh rate
1.28.8.0: Updated version & history.txt
