Page:
Manual Testing Dev
Pages
3D Cases
Adapters & Accessories
Advanced Settings
Assembly
BluePill (STM32) Compatibility (Clones Fakes)
BlueSCSI 1.0 a b c Assembly
BlueSCSI 1.1 DB25 Assembly
BlueSCSI 1.1 Desktop Assembly
CD Image Support
Disk Drivers (Mac)
Disk Drives (PC)
External LED
Flashing (Advanced)
Flashing
Getting Started
Home
Image File Fragmentation
Image Sets
Mac CD to HDD (Hack!)
Manual Testing Dev
Performance
SCSI Vendor Config
SD Cards
ST Link Setup
Slow SPI
Supported Systems
Termination
Transferring files (Mac)
Troubleshooting
Usage
Variants
2
Manual Testing Dev
Eric Helgeson edited this page 2022-06-23 14:44:05 +00:00
Table of Contents
Automated build
PR's are automatically built with PlatformIO and reported back to Pull Requests.
Manual Testing
Macintosh
We want to ensure no regressions in compatibility with currently working systems. Some timings could be affected by code changes so we want to ensure they are within tolerance. We want to cover all the common SCSI-1 buses in macs that do not have IDE - the most common use case for BlueSCSI.
- Mac Plus (Quirky/Early SCSI)
- Mac SE 68000
- Mac IIci/LC III 68030
- LC 575 68040
- PowerMac 6100 - 601
- PowerMac G3
Test Procedure
- Validate boot, normal operations.
- Validate more than one SCSI image on the SD card works.
- Run SCSI Director Pro 4 to validate no regression in performance.
- Run at least two "Full Tests" in Silver Lining 5 without error.
- Format a drive with Apple SC HD Setup & Disk Utility.
Other Systems
Many of the primary developers do not have other vintage systems to test on so a call is put out to the community on Discord, TinkerDifferent, and Github Discussions to test.
- Home
- Getting Started
- Trouble Shooting
- Advanced
- Developers
- Variants
- Adapters & Accessories