3

ST Link Setup

Eric Helgeson edited this page 2024-06-17 09:44:29 -05:00

Table of Contents

• STLinkV2 Setup

Important

If you are looking for BlueSCSI v2 documentation please go here: https://github.com/BlueSCSI/BlueSCSI-v2/wiki

STLinkV2 Setup

STLink's are device programmers needed to load the USB Bootloader or for development and debugging. If your BlueSCSI has USB capability you do not need this.

Be sure to buy the "Clone" STLink V2 programmer - the official STLink programmer does not work.

Make sure the STLinkV2 is up to date - Latest Firmware

Connect pins SWDIO, GND, SWCLK, and 3.3v from the programmer to the Blue Pill.

NOTE: These are not the same as Serial ports.

• Home
• Getting Started
  • Assembly
  • Usage
  • 3D Cases
  • Performance
  • Supported Systems
  • Disk Drivers(Mac)
  • Disk Drives(PC)
  • Transferring files (Mac)
  • CD Image Support
  • Mac CD to HDD (Hack!)
• Trouble Shooting
  • SD Card Compatibility
  • Termination
• Advanced
  • Image Sets
  • Settings
  • Flashing
  • BluePills
  • External LED
• Developers
  • Release Testing
• Variants
• Adapters & Accessories

Important

If you are looking for BlueSCSI v2 documentation please go here: https://github.com/BlueSCSI/BlueSCSI-v2/wiki