Macintosh-HW/BlueSCSI
1
0
Fork 0
mirror of https://github.com/erichelgeson/BlueSCSI.git synced 2024-11-21 15:31:00 +00:00
Code Issues Projects Releases Wiki Activity
Page: Slow SPI
Pages
3D Cases Adapters & Accessories Advanced Settings Assembly BluePill (STM32) Compatibility (Clones Fakes) BlueSCSI 1.0 a b c Assembly BlueSCSI 1.1 DB25 Assembly BlueSCSI 1.1 Desktop Assembly CD Image Support Disk Drivers (Mac) Disk Drives (PC) External LED Flashing (Advanced) Flashing Getting Started Home Image File Fragmentation Image Sets Mac CD to HDD (Hack!) Manual Testing Dev Performance SCSI Vendor Config SD Cards ST Link Setup Slow SPI Supported Systems Termination Transferring files (Mac) Troubleshooting Usage Variants
4 Slow SPI
Eric Helgeson edited this page 2024-06-17 09:39:40 -05:00

Important

If you are looking for BlueSCSI v2 documentation please go here: https://github.com/BlueSCSI/BlueSCSI-v2/wiki

BlueSCSI will try to communicate with your SD card at full and half speed SPI before giving up.

If your card is communicating at 25MHz it has about a 5% performance hit (not much, but worth investigating!)

Try the following to resolve:

  • Check for bridges on your SD card holder
  • Update to the latest firmware
  • Do a full overwrite format with SD Formatter
  • Clean the SD Card contacts with IPA and let fully dry, a bad connection can sometimes cause this.
  • Try a different SD card, some SD cards may not be able to communicate at full SPI.

BlueSCSI Logo

Important

If you are looking for BlueSCSI v2 documentation please go here: https://github.com/BlueSCSI/BlueSCSI-v2/wiki