PCI config read fails should return all 1 bits.
All unused registers in an existing PCI device should return 0.
Because that's what my Power Mac 8600 returns when I run my Open Firmware lspci command.
Any bus/device/function that doesn't exist returns FF and won't be listed by lspci.
Any registers that are unused will show as 00 in the lspci output.
Make grackle log bus:device.function @register.size in all cases.
setenv doesn't allow entering strings that include multiple lines which is useful for nvramrc.
nvedit uses CTRL-C to end editing, like Open Firmware. It does not support deleting characters from a line or editing previous lines or any other special keys. It doesn't have nvstore or nvquit or nvrecover commands. Basically, you should edit your nvramrc in a text editor, then copy and paste into the debugger.
- Allow changing integer variables. Previously they could not be changed.
- Allow changing string variables. Previously they could only be changed if their length increased.
- printenv had a bug with strings longer than 32 characters.
- printenv now translates carriage return (used in nvramrc) as endl (which should perform carriage return and linefeed)
- For integers, setenv assumes decimal number input but if that fails it will try hex conversion. 0x prefix for hex numbers is optional unless the number only has digits 0 - 9.
- setenv converts linefeed to carriage return for string variables. nvramrc requires this for proper editing in Open Firmware.
- Added Open Firmware 2.4 nvram field names to OfNvramHdr comments.
- increase delay to 800 consecutive characters (reduces times when Open Firmware throws away pasted text)
- don't log the first sock read error (when accept hasn't been called yet) but do log sock read error if accept was called successfully already.
The expansion rom base register indicates the size of the expansion rom by the number of bits that remain zero after code attempts to set them all to 1. For example, a result of fffe0000 means 128K. The 11 least significant bits are ignored in the size calculation, which means the minimum rom size is indicated by fffff800 = 2K.
Handle the case where an expansion rom file might not have a size that is a multiple of 2 or is not greater than 2K.
Bytes between the end of the file and the end of the calculated rom size are set to 0xff.
Don't always return 0 when reading it. The status register contains some bits that Open Firmware uses to set some properties.
A PCI device can set a default status register value to set those bits.
this->status = 0x02B0; // 0000 0 01 0 1 0 1 1 0000 Capabilities List, 66 MHz, Fast Back-to-Back, DevSel Speed: Medium
For invalid or unsupported PCI accesses, do the following:
- log a device's full pci address using pciutils setpci command format bb:dd.f @rr.s (bus:device:function @register+offset.size).
- report as read or write access.
- log value for writes.
- bus, device, function, and register values cannot be determined from Invalid IDSEL values so they will output as ??.
- for invalid IDSEL values, report the entire value of the config_addr.
- for valid IDSEL values, the bus number cannot be determined since IDSEL only specifies device number. It's probably bus 00 but we'll show ?? to indicate an IDSEL type access.
Add missing config type read access logging for chaos.
Devices that are not probed by Open Firmware might still be usable by Mac OS X or Linux if they can enumerate PCI devices without using Open Firmware's device tree.
A patch in nvramrc can make Open Firmware probe all the devices.
The point is that the emulation does not need to be limited to 5 slots.
With the option --serial_backend=socket, input and output to a serial port will use a SOCK_STREAM type UNIX domain socket. This allows you to do Open Firmware in one window, while the first window can be used for dingusppc debugger.
Other fixes:
- Added SIGTERM handler so that if the user force quits dingusppc, the terminal settings are properly restored. A user needs to force quit when --serial_backend=stdio and Open Firmware is taking input from ttya. If terminal settings are not restored, then running dingusppc after a force quit will cause Control-C to not work when --serial_backend is not stdio.
- Added a couple numbers to rcv_char_available - 15 is the number of consecutive characters that can processed. 400 is the total number of calls to rcv_char_available after 15 consecutive characters have been read before additional characters can be read. This delay in processing additional characters allows pasting arbitrarily large amounts of text into Open Firmware. A real serial port terminal app might have a text pacing option to limit the number of output characters per second but that is not an option since the emulator is not limiting character data to a baud rate.
Related Notes:
The socket file is created when dingusppc starts.
The socket file is named dingusppcsocket and is created in the current working directory (usually where the executable is located and where the dingusppc.log, nvram.bin, and pram.bin files are created).
The socket file is not visible in the Finder. You can see it in the terminal using the ls command.
The socket file can be used with the following command in a new terminal window:
socat UNIX-CLIENT:dingussocket -,cs8,parenb=0,echo=0,icanon=0,isig=0,icrnl=0
When dingusppc quits, the socat command ends.
Other notes:
The dingusppc --debugger option causes dingusppc to enter the debugger before Open Firmware outputs anything. You can connect to the socket while dingusppc is in the debugger. Then enter the go command to leave the debugger and start Open Firmware. However, since the startup sound takes a long time, you can probably connect to the socket before Open Firmware starts even without the --debugger option. It's like with a real Power Mac - you have a few seconds to hold Command-Option-O-F except in this case you have a few seconds to press the up arrow and press enter (for executing the last command from the terminal command history) and if you do it too late you'll still get into Open Firmware if auto-boot? was previously set to false using the dingusppc debugger which is actually the only way to get into Open Firmware since a keyboard is currently not emulated?).
To set ttya as the input and output device in Open Firmware, you can use the setenv command in the dingusppc debugger. The device path needs to be longer than the current device path (because code for handling shortening of the paths is currently not implemented). For example, ttya can replace kbd for the input-device, but to replace screen for the output-device you need to add some extra characters like this: ttya,11 (I think the number is for baud but we're not using a real serial port so baud doesn't matter).
Future ideas:
- Have dingusppc execute the socat command for you so that it opens a terminal window before Open Firmware starts.
- Add another --serial_backend for the printer port (ttyb) since now we have more than one type of serial backend. If both serial ports use socket backend, then a different name for the second socket is required.
- Have an option to make dingusppc block until something connects to the socket (this means calling accept after listen instead of after select).
- Test compatibility with serial port socket created by Parallels Desktop virtual machines in macOS.
- Find a solution that works with Windows.
- Test with Linux.
- Create a serial_backend type for tty devices. I suppose maybe socat can pipe the file socket to tty but a direct connection might be easier to setup.
- Allow using a socket created by some other app (for example, socat UNIX-LISTEN). This means dingusppc will assume the client role and will call connect instead of accept.
Maxim Poliakovski
dingusdev
joevt