Thomas Harte
|
d6b87053bf
|
Introduced an explicit record of whether a video byte is latched. It's definitely incorrect to treat the latching of 0 as equivalent to no latching, as the byte that will eventually become video is not strongly implied.
|
2017-07-08 20:40:19 -04:00 |
|
Thomas Harte
|
22389a5d2d
|
Merge branch 'master' into HiRes
|
2017-07-08 20:38:25 -04:00 |
|
Thomas Harte
|
54efcb7e2f
|
Made a game attempt at automatic motor control and ensured setting is initialised correctly from the user defaults.
|
2017-07-08 19:31:20 -04:00 |
|
Thomas Harte
|
e2575d6de4
|
Routed tape motor selections through to the C++ side of the world, and ensured that manual tape playback works properly.
|
2017-07-08 19:21:12 -04:00 |
|
Thomas Harte
|
46fff8e8a2
|
Ensured bit 8 is uniquely from the latched video byte, not an OR of that with the refresh address.
|
2017-07-06 22:48:48 -04:00 |
|
Thomas Harte
|
a3684545b5
|
Added a block on the tape motor for a short period after each time the ROM routine is intercepted for a substituted byte read. To reduce the collision between fast tape and real tape loading.
|
2017-07-06 22:33:54 -04:00 |
|
Thomas Harte
|
a72a2e0a1a
|
Ensured tape doesn't proceed of its own volition when in fast-loading mode.
|
2017-06-23 20:21:37 -04:00 |
|
Thomas Harte
|
50375fb373
|
Ensured tape position is unaffected if the attempt at loading quickly fails.
|
2017-06-23 20:18:19 -04:00 |
|
Thomas Harte
|
cb105fdeb4
|
Took a first stab at high-res support.
|
2017-06-22 22:48:17 -04:00 |
|
Thomas Harte
|
acfd4dde36
|
Reduced port writes which can adjust programmatic sync, and prevented anything while NMI generation is active. Moved line counter increment from triggered by interrupt acknowledge to triggered by horizontal sync. In both cases, cribbing from my own earlier work. Initial results suggest that sync issues are resolved in third-party software.
|
2017-06-22 22:44:06 -04:00 |
|
Thomas Harte
|
644ef13acd
|
Connected up the fast-tape GUI option for the ZX80 and '81.
|
2017-06-22 20:20:31 -04:00 |
|
Thomas Harte
|
b7c978e078
|
Added getters for most of the input lines, and attempted to round out the ZX81's wait logic.
|
2017-06-22 20:11:19 -04:00 |
|
Thomas Harte
|
52d9ddf9e5
|
Gave the binary tape player a more logical assignment of wave level to output level. Which miraculously appears to have been the issue with the ZX80/81 tape loading — the inconsistency of silences seems to have been the issue.
|
2017-06-21 22:13:24 -04:00 |
|
Thomas Harte
|
a6810fc3ef
|
Removed some minor duplicity and ensured that hsync/NMI ends on the nominated cycle, not one afterwards.
|
2017-06-21 21:44:42 -04:00 |
|
Thomas Harte
|
15f6c51062
|
Added the most trivial implementation of the ZX81 wait line.
|
2017-06-21 21:28:14 -04:00 |
|
Thomas Harte
|
e1355d4b62
|
Restored proper video output.
|
2017-06-21 21:18:09 -04:00 |
|
Thomas Harte
|
4bf13610ce
|
Reinstated interrupts by moving the refresh test back into the refresh cycle.
|
2017-06-21 21:03:39 -04:00 |
|
Thomas Harte
|
0e0ce379b4
|
Renamed MachineCycle to PartialMachineCycle given that it mostly no longer intends to describe an entire machine cycle.
|
2017-06-21 20:38:08 -04:00 |
|
Thomas Harte
|
36e8a11505
|
Sought to simplify the way partial machine cycles are communicated, for ease of machine implementation. Also implemented the wait line.
|
2017-06-21 20:32:08 -04:00 |
|
Thomas Harte
|
e1a2580b2a
|
Renamed BusOperation to MachineCycle::Operation.
|
2017-06-17 21:53:45 -04:00 |
|
Thomas Harte
|
08a542a324
|
Reenabled the fast-loading hack.
|
2017-06-15 18:30:12 -04:00 |
|
Thomas Harte
|
9b3d05e05f
|
Simplified decoding logic.
|
2017-06-14 22:24:44 -04:00 |
|
Thomas Harte
|
d8e3103a2b
|
Fixes: switched ZX80 and ZX81 timing to the correct way around, ensured that my wait takes effect if HALT **isn't** set, and made sure to recover from it.
|
2017-06-13 21:48:17 -04:00 |
|
Thomas Harte
|
76a64d13a0
|
Made a first attempt at ZX81 emulation.
|
2017-06-13 21:25:55 -04:00 |
|
Thomas Harte
|
1e975859c2
|
Started splitting ZX80 and ZX81 paths. Also the '80 fires its horizontal sync a little earlier than the '81, so pulled that back a little.
|
2017-06-13 20:09:09 -04:00 |
|
Thomas Harte
|
4c5261bfa0
|
Made first attempt to use the horizontal counter for something; here for sync timing only, even though I've gone exclusively with '81-style timing for now.
|
2017-06-12 22:28:30 -04:00 |
|
Thomas Harte
|
8b09b4180b
|
This now at least remembers whether it is meant to be a ZX81 and has storage for a horizontal counter.
|
2017-06-12 21:33:16 -04:00 |
|
Thomas Harte
|
b9dbb6bcf8
|
Discovered my timing error: the I/R <-> A loads should take an extra cycle. This means the ZX80 now finally takes the correct 207 cycles per line. Fixed the video output wave to be clocked at the appropriate rate.
|
2017-06-12 18:55:04 -04:00 |
|
Thomas Harte
|
302c2e94de
|
Corrected lingering hard-coded mask. So titles for memory configurations above 1kb now load.
|
2017-06-11 21:27:46 -04:00 |
|
Thomas Harte
|
06fe07932a
|
While tidying up, killed an unused instance variable.
|
2017-06-11 21:21:26 -04:00 |
|
Thomas Harte
|
6913c7a018
|
This also can just use rom_mask_.
|
2017-06-11 19:29:20 -04:00 |
|
Thomas Harte
|
6b602c74b7
|
Made an attempt to support memory maps other than the unexpanded default of 1kb.
|
2017-06-11 19:29:02 -04:00 |
|
Thomas Harte
|
e40d553045
|
Bumped the tape parser up into the machine to ensure a maintained state. Temporarily disabled normally-timed tape playback.
|
2017-06-11 18:31:43 -04:00 |
|
Thomas Harte
|
e5b30cdfbb
|
Attempted to ensure appropriate resumption of processing after quick-reading a tape byte.
|
2017-06-11 17:28:47 -04:00 |
|
Thomas Harte
|
ba5f34f827
|
Narrowed view to the centre 80% of a frame.
|
2017-06-11 17:24:32 -04:00 |
|
Thomas Harte
|
84d2feb2e6
|
Cleaned up and implemented fast-tape hack. I've decided it'd be better to test some other software, potentially to give multiple issues to think about, rather than sitting around with just the one.
|
2017-06-11 16:42:49 -04:00 |
|
Thomas Harte
|
d910a4fd38
|
Adjusted to signal an interrupt during the refresh cycle rather than weirdly just afterwards. Which cuts video timing down by 4 cycles a line. There still might be a problem here somewhere though, as I'm getting 206 cycles/line and the internet states it should be 207.
Also: lots of printfs have grown temporarily as I try to figure out what I'm doing so wrong as to break loading.
|
2017-06-11 13:32:20 -04:00 |
|
Thomas Harte
|
5626d35bc4
|
Tried flipping the bit meaning; decided at least to leave it in full-byte form.
|
2017-06-06 18:38:05 -04:00 |
|
Thomas Harte
|
63e0802f4e
|
Ensured tape input appears on the returned value.
|
2017-06-06 18:16:27 -04:00 |
|
Thomas Harte
|
e3ee9604a5
|
Added comments.
|
2017-06-06 18:01:33 -04:00 |
|
Thomas Harte
|
8c66e1d99d
|
Factored out ZX80/81 video and rejigged to ensure it will keep ticking over irrespective of whether the machine is supplying data.
|
2017-06-06 17:53:23 -04:00 |
|
Thomas Harte
|
ca9e8aecd6
|
Made a seemingly unsuccessful attempt to add tape input.
|
2017-06-06 10:13:32 -04:00 |
|
Thomas Harte
|
cc4cb45e9d
|
Implemented keyboard input and ensured that the signal generated is marked as composite, putting the colour-suppression ball into the CRT's court.
|
2017-06-06 09:25:18 -04:00 |
|
Thomas Harte
|
ebbf6e6133
|
Surprisingly, I think this may actually be the correct output: stopped throwing away the I part of the refresh register and flipped black and white.
|
2017-06-06 09:03:09 -04:00 |
|
Thomas Harte
|
cba07dec7e
|
Doubled up to display all eight pixels. To confirm that they are the wrong pixels.
|
2017-06-06 08:59:00 -04:00 |
|
Thomas Harte
|
6f7037b2b1
|
Made an initial stab at outputting half the correct pixels.
|
2017-06-06 08:55:07 -04:00 |
|
Thomas Harte
|
ef4b2f963d
|
Probably more-or-less corrected. But this is all a bit too interdependent.
|
2017-06-05 23:52:56 -04:00 |
|
Thomas Harte
|
97f3ff03b6
|
Restored white background and attempted to correct output timing deficiencies. Incomplete success.
|
2017-06-05 23:50:04 -04:00 |
|
Thomas Harte
|
2fbc7a2869
|
Made a very basic attempt at getting something that at least demarcates proper graphics output.
|
2017-06-05 23:32:49 -04:00 |
|
Thomas Harte
|
4983718df7
|
Got to outputting something to the CRT. Should be just proper syncs and a paper background. It's not synchronising properly, so something is amiss in my timing.
|
2017-06-05 10:47:42 -04:00 |
|
Thomas Harte
|
23ca00fd9a
|
Added memory fuzzing as a way to verify state being written by the Z80. Eventually discovered the HALT problem as fixed in the last commit, so have stripped away the caveman stuff again.
|
2017-06-05 10:36:07 -04:00 |
|
Thomas Harte
|
893f61b490
|
Attempted specifically to reproduce the 1kb ZX80 memory map in the hope of getting compact lines and in case mirroring is why I'm getting completely empty video reads. Still no action.
|
2017-06-05 09:38:49 -04:00 |
|
Thomas Harte
|
7e3a46c33e
|
[Re]discovered that sync may also be a product of the interrupt cycle. So started looking into that.
|
2017-06-04 21:54:55 -04:00 |
|
Thomas Harte
|
73654d51dd
|
Wired up actually to run.
|
2017-06-04 18:37:13 -04:00 |
|
Thomas Harte
|
096551ab3e
|
Made a first attempt to hash out the ZX80's bus. Video output isn't yet going though. Can't seem to find clarity on whether horizontal sync is really programmatic. Let's see.
|
2017-06-04 18:32:23 -04:00 |
|
Thomas Harte
|
c485c460f7
|
Imported the ZX80 and 81 system ROMs (though not publicly), added enough code to post their contents into C++ world.
|
2017-06-04 18:08:35 -04:00 |
|
Thomas Harte
|
d2637123c4
|
Added necessary support to get as far as an empty window when attempting to load a piece of ZX80 software.
|
2017-06-04 17:55:19 -04:00 |
|