Currently, when a fragment is relaxed, its size is modified, but its
offset is not (it gets laid out as a side effect of checking whether
it needs relaxation), then all subsequent fragments are invalidated
because their offsets need to change. When bundling is enabled,
relaxed fragments need to get laid out again, because the increase in
size may push it over a bundle boundary. So instead of only
invalidating subsequent fragments, also invalidate the fragment that
gets relaxed, which causes it to get laid out again.
This patch also fixes some trailing whitespace and fixes the
bundling-related debug output of MCFragments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174401 91177308-0d34-0410-b5e6-96231b3b80d8
Something very strange is going on with the output registers in this
target. Its ISelLowering code is inserting dangling CopyToReg nodes,
hoping that those physregs won't get clobbered before the RETURN.
This patch adds the output registers as implicit uses on RETURN
instructions in the custom emission pass. I'd much prefer to have those
CopyToReg nodes glued to the RETURNs, but I don't see how.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174400 91177308-0d34-0410-b5e6-96231b3b80d8
The liveout lists are about to be removed from MRI, this is the only
place they were used after register allocation.
Get the live out V registers directly from the return instructions
instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174399 91177308-0d34-0410-b5e6-96231b3b80d8
Use one intrinsic for all sorts of interpolation.
Use two separate unexpanded instructions to represent INTERP_XY and _ZW -
this will allow to eliminate one part if it's not used.
Track liveness of special interpolation regs instead of reserving them -
this will allow to reuse those regs, lowering reg pressure.
Patch By: Vadim Girlin
v2[Vincent Lejeune]: Rebased against current llvm master
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174394 91177308-0d34-0410-b5e6-96231b3b80d8
Emitting the function name allows us to check for it in the FileCheck
tests so we can make sure FileCheck is checking the output of the
correct function.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174392 91177308-0d34-0410-b5e6-96231b3b80d8
Fixes 37 piglit tests and allows e.g. FlightGear to run with radeonsi.
Patch by: Michel Dänzer
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174391 91177308-0d34-0410-b5e6-96231b3b80d8
In the loop vectorizer cost model, we used to ignore stores/loads of a pointer
type when computing the widest type within a loop. This meant that if we had
only stores/loads of pointers in a loop we would return a widest type of 8bits
(instead of 32 or 64 bit) and therefore a vector factor that was too big.
Now, if we see a consecutive store/load of pointers we use the size of a pointer
(from data layout).
This problem occured in SingleSource/Benchmarks/Shootout-C++/hash.cpp (reduced
test case is the first test in vector_ptr_load_store.ll).
radar://13139343
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174377 91177308-0d34-0410-b5e6-96231b3b80d8
It caused hangups in compiling clang/lib/Parse/ParseDecl.cpp and clang/lib/Driver/Tools.cpp in stage2 on some hosts.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174374 91177308-0d34-0410-b5e6-96231b3b80d8
The sh_link in the ELF section header of .ARM.exidx should
be filled with the section index of the corresponding text
section.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174372 91177308-0d34-0410-b5e6-96231b3b80d8
This moves the bit twiddling and string fiddling functions required by other
parts of the backend into a separate library. Previously they resided in
AArch64Desc, which created a circular dependency between various components.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174369 91177308-0d34-0410-b5e6-96231b3b80d8
and enables the instruction printer to print aliased
instructions.
Due to usage of RegisterOperands a change in common
code (utils/TableGen/AsmWriterEmitter.cpp) is required
to get the correct register value if it is a RegisterOperand.
Contributer: Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174358 91177308-0d34-0410-b5e6-96231b3b80d8
it would replace the load with one with the higher alignment. However, it did
not place the new load in the worklist, which prevented later DAG combines in
the same phase (for example, target-specific combines) from ever seeing it.
This patch corrects that oversight, and updates some tests whose output changed
due to slightly different DAGCombine outputs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174343 91177308-0d34-0410-b5e6-96231b3b80d8
Per discussion in rdar://13127907, we should emit a hard error only if
people write code where the requested alignment is larger than achievable
and assumes the low bits are zeros. A warning should be good enough when
we are not sure if the source code assumes the low bits are zeros.
rdar://13127907
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174336 91177308-0d34-0410-b5e6-96231b3b80d8
Rename the PARAMATTR_CODE_ENTRY to PARAMATTR_CODE_ENTRY_OLD. It will be replaced
by another encoding. Keep around the current LLVM attribute encoder/decoder
code, but move it to the bitcode directories so that no one's tempted to use
them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174335 91177308-0d34-0410-b5e6-96231b3b80d8
I didn't see those because the test case used "not grep". FileCheck the test and
XFAIL it, preserving the old optimization, so this can be fixed eventually.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174330 91177308-0d34-0410-b5e6-96231b3b80d8
This required disabling a PowerPC optimization that did the following:
input:
x = BUILD_VECTOR <i32 16, i32 16, i32 16, i32 16>
lowered to:
tmp = BUILD_VECTOR <i32 8, i32 8, i32 8, i32 8>
x = ADD tmp, tmp
The add now gets folded immediately and we're back at the BUILD_VECTOR we
started from. I don't see a way to fix this currently so I left it disabled
for now.
Fix some trivially foldable X86 tests too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174325 91177308-0d34-0410-b5e6-96231b3b80d8
This change lets us bootstrap LLVM/Clang under ASan and MSan. It contains
fixes for 2 issues:
- X86JIT reads return address from stack, which MSan does not know is
initialized.
- bugpoint tests run binaries with RLIMIT_AS. This does not work with certain
Sanitizers.
We are no longer including config.h in Compiler.h with this change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174306 91177308-0d34-0410-b5e6-96231b3b80d8
Swift has a renaming dependency if we load into D subregisters. We don't have a
way of distinguishing between insertelement operations of values from loads and
other values. Therefore, we are pessimistic for now (The performance problem
showed up in example 14 of gcc-loops).
radar://13096933
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174300 91177308-0d34-0410-b5e6-96231b3b80d8
I am going to add in the actual test cases with the actual functionality
changes in a later patch because I want to include some test cases.
To be clear when I say no *TRUE* functionality change I mean that this
patch (like it says in the title) only contains getters/setters and sets
up a default initial value of the instance variable to false so that
this patch does not affect any other uses of Global Variable.h.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174295 91177308-0d34-0410-b5e6-96231b3b80d8
