At the time I wrote this code (circa 2007), TargetRegisterInfo was using a std::set to perform these queries. Switching to the static hashtables was an obvious improvement, but in reality there's no reason to do anything other than scan.
With this change, total LLC time on a whole-program 403.gcc is reduced by approximately 1.5%, almost all of which comes from a 15% reduction in LiveVariables time. It also reduces the binary size of LLC by 86KB, thanks to eliminating a bunch of very large static tables.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133051 91177308-0d34-0410-b5e6-96231b3b80d8
Make the Elements vector private and expose an ArrayRef through
getOrder() instead. getOrder will eventually provide multiple
user-specified allocation orders.
Use the sorted member set for member and subclass tests. Clean up a lot
of ad hoc searches.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133040 91177308-0d34-0410-b5e6-96231b3b80d8
Measure the worst case number of probes for a miss instead of the less
conservative number of probes required for an insertion.
Lower the limit to < 6 probes worst case.
This doubles the size of the ARM and X86 hash tables, other targets are
unaffected. LiveVariables runs 12% faster with this change.
<rdar://problem/9598545>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132999 91177308-0d34-0410-b5e6-96231b3b80d8
Make the hash tables as small as possible while ensuring that all
lookups can be done in less than 8 probes.
Cut the aliases hash table in half by only storing a < b pairs - it
is a symmetric relation.
Use larger multipliers on the initial hash function to ensure that it
properly covers the whole table, and to resolve some clustering in the
very regular ARM register bank.
This reduces the size of most of these tables by 4x - 8x. For instance,
the ARM tables shrink from 48 KB to 8 KB.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132888 91177308-0d34-0410-b5e6-96231b3b80d8
The constant hash tables for sub-registers and overlaps are generated
the same way, so extract a function to generate and print the hash
table.
Also use the information computed by CodeGenRegisters.cpp instead of the
locally data.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132886 91177308-0d34-0410-b5e6-96231b3b80d8
Besides moving structural computations to CodeGenRegisters.cpp, this
also well-defines the order of these lists:
- Sub-register lists come from a pre-order traversal of the graph
defined by the SubRegs lists in the .td files.
- Super-register lists are topologically ordered so no register comes
before any of its sub-registers. When the sub-register graph is not a
tree, independent super-registers appear in numerical order.
- Lists of overlapping registers are ordered according to register
number.
This reverses the order of the super-regs lists, but nobody was
depending on that. The previous order of the overlaps lists was odd, and
it may have depended on the precise behavior of std::stable_sort.
The old computations are still there, but will be removed shortly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132881 91177308-0d34-0410-b5e6-96231b3b80d8
Create a new CodeGenRegBank class that will eventually hold all the code
that computes the register structure from Records.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132849 91177308-0d34-0410-b5e6-96231b3b80d8
Some register classes are only used for instruction operand constraints.
They should never be used for virtual registers. Previously, those
register classes were given an empty allocation order, but now you can
say 'let isAllocatable=0' in the register class definition.
TableGen calculates if a register is part of any allocatable register
class, and makes that information available in TargetRegisterDesc::inAllocatableClass.
The goal here is to eliminate use cases for overriding allocation_order_*
methods.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132508 91177308-0d34-0410-b5e6-96231b3b80d8
same dwarf number. This will be used for creating a dwarf number to register
mapping.
The only case that needs this so far is the XMM/YMM registers that unfortunately
do have the same numbers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132314 91177308-0d34-0410-b5e6-96231b3b80d8
There was no way to check if a given register/mode pair was valid. We now return
an error code (-2) instead of asserting. If anyone thinks that an assert
at this point is really needed, we can autogen a hasValidDwarfRegNum instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132236 91177308-0d34-0410-b5e6-96231b3b80d8
The RegisterInfo.td file should only specify the indexes that sources need to
refer to. The rest is inferred.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@131058 91177308-0d34-0410-b5e6-96231b3b80d8
On the x86-64 and thumb2 targets, some registers are more expensive to encode
than others in the same register class.
Add a CostPerUse field to the TableGen register description, and make it
available from TRI->getCostPerUse. This represents the cost of a REX prefix or a
32-bit instruction encoding required by choosing a high register.
Teach the greedy register allocator to prefer cheap registers for busy live
ranges (as indicated by spill weight).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129864 91177308-0d34-0410-b5e6-96231b3b80d8
registers that alias Reg, including itself. This is almost the same as the
existing getAliasSet() method, except for the inclusion of Reg.
The name matches the reflexive TRI::regsOverlap(x, y) relation.
It is very common to do stuff to a register and all its aliases:
stuff(Reg)
for (const unsigned *Alias = TRI->getAliasSet(Reg); *Alias; ++Alias)
stuff(*Alias);
That can now be written as the simpler:
for (const unsigned *Alias = TRI->getOverlaps(Reg); *Alias; ++Alias)
stuff(*Alias);
This change requires a bit more constant space for the alias lists because Reg
is included and because the empty alias list cannot be shared any longer.
If the getAliasSet method is eventually removed, this space can be reclaimed by
sharing overlap lists. For instance, %rax and %eax have identical overlap sets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121800 91177308-0d34-0410-b5e6-96231b3b80d8
A Register with subregisters must also provide SubRegIndices for adressing the
subregisters. TableGen automatically inherits indices for sub-subregisters to
minimize typing.
CompositeIndices may be specified for the weirder cases such as the XMM sub_sd
index that returns the same register, and ARM NEON Q registers where both D
subregs have ssub_0 and ssub_1 sub-subregs.
It is now required that all subregisters are named by an index, and a future
patch will also require inherited subregisters to be named. This is necessary to
allow composite subregister indices to be reduced to a single index.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104704 91177308-0d34-0410-b5e6-96231b3b80d8
A Register with subregisters must also provide SubRegIndices for adressing the
subregisters. TableGen automatically inherits indices for sub-subregisters to
minimize typing.
CompositeIndices may be specified for the weirder cases such as the XMM sub_sd
index that returns the same register, and ARM NEON Q registers where both D
subregs have ssub_0 and ssub_1 sub-subregs.
It is now required that all subregisters are named by an index, and a future
patch will also require inherited subregisters to be named. This is necessary to
allow composite subregister indices to be reduced to a single index.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104654 91177308-0d34-0410-b5e6-96231b3b80d8
This passes lit tests, but I'll give it a go through the buildbots to smoke out
any remaining places that depend on the old SubRegIndex numbering.
Then I'll remove NumberHack entirely.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104615 91177308-0d34-0410-b5e6-96231b3b80d8
structure that represents a mapping without any dependencies on SubRegIndex
numbering.
This brings us closer to being able to remove the explicit SubRegIndex
numbering, and it is now possible to specify any mapping without inventing
*_INVALID register classes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104563 91177308-0d34-0410-b5e6-96231b3b80d8
This is the beginning of purely symbolic subregister indices, but we need a bit
of jiggling before the explicit numeric indices can be completely removed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104492 91177308-0d34-0410-b5e6-96231b3b80d8
A subclass is allowed to have a larger spill size than the superclass, and the
spill alignment must be a multiple of the superclass alignment. This causes
the following new subclass relations:
=== Alpha ===
F4RC -> F8RC
=== PPC ===
F4RC -> F8RC
=== SPU ===
R8C -> R16C -> R32C/R32FP -> R64C/R64FP -> GPRC/VECREG
=== X86 ===
FR32 -> FR64 -> VR128
RFP32 -> RFP64 -> RFP80
These subclass relations are consistent with the behaviour of -join-cross-class-copies.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70511 91177308-0d34-0410-b5e6-96231b3b80d8
This will be used to replace things like X86's MOV32to32_.
Enhance ScheduleDAGSDNodesEmit to be more flexible and robust
in the presense of subregister superclasses and subclasses. It
can now cope with the definition of a virtual register being in
a subclass of a use.
Re-introduce the code for recording register superreg classes and
subreg classes. This is needed because when subreg extracts and
inserts get coalesced away, the virtual registers are left in
the correct subclass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@68961 91177308-0d34-0410-b5e6-96231b3b80d8
use a SUB instruction instead of an ADD, because -128 can be
encoded in an 8-bit signed immediate field, while +128 can't be.
This avoids the need for a 32-bit immediate field in this case.
A similar optimization applies to 64-bit adds with 0x80000000,
with the 32-bit signed immediate field.
To support this, teach tablegen how to handle 64-bit constants.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57663 91177308-0d34-0410-b5e6-96231b3b80d8
subregister query, and by increasing the size of the subregister hashtable so
that there are fewer collisions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54781 91177308-0d34-0410-b5e6-96231b3b80d8
- Use a more accurate heuristic for the size of the hashtable.
- Use bitwise and instead of modulo since the size is a power of two.
- Use new[] instead of malloc().
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52951 91177308-0d34-0410-b5e6-96231b3b80d8
<16 x float> is 64-byte aligned (for some reason),
which gets us into the stack realignment code. The
computation changing FP-relative offsets to SP-relative
was broken, assiging a spill temp to a location
also used for parameter passing. This
fixes it by rounding up the stack frame to a multiple
of the largest alignment (I concluded it wasn't fixable
without doing this, but I'm not very sure.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52750 91177308-0d34-0410-b5e6-96231b3b80d8
and better control the abstraction. Rename the type
to MVT. To update out-of-tree patches, the main
thing to do is to rename MVT::ValueType to MVT, and
rewrite expressions like MVT::getSizeInBits(VT) in
the form VT.getSizeInBits(). Use VT.getSimpleVT()
to extract a MVT::SimpleValueType for use in switch
statements (you will get an assert failure if VT is
an extended value type - these shouldn't exist after
type legalization).
This results in a small speedup of codegen and no
new testsuite failures (x86-64 linux).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52044 91177308-0d34-0410-b5e6-96231b3b80d8
%r3 on PPC) in their ASM files. However, it's hard for humans to read
during debugging. Adding a new field to the register data that lets you
specify a different name to be printed than the one that goes into the
ASM file -- %x3 instead of %r3, for instance.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@47534 91177308-0d34-0410-b5e6-96231b3b80d8
Split the pattern parsing code out from the dag isel emitter into it's own file.
No functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45632 91177308-0d34-0410-b5e6-96231b3b80d8
to use different mappings for EH and debug info;
no functional change yet.
Fix warning in X86CodeEmitter.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44056 91177308-0d34-0410-b5e6-96231b3b80d8
This makes DwarfRegNum to accept list of numbers instead.
Added three different "flavours", but only slightly tested on x86-32/linux.
Please check another subtargets if possible,
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43997 91177308-0d34-0410-b5e6-96231b3b80d8
This also changes the syntax for llvm.bswap, llvm.part.set, llvm.part.select, and llvm.ct* intrinsics. They are automatically upgraded by both the LLVM ASM reader and the bitcode reader. The test cases have been updated, with special tests added to ensure the automatic upgrading is supported.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@40807 91177308-0d34-0410-b5e6-96231b3b80d8
This commit fixes two things. One is a pair of VStudio compiler errors stemming from variables
which defined within the for loop statement and also within the body of the for loop. I fixed these
by renaming one of the two variables. Additionally, I've made the Function*->ExFunc map in
ExternalFunctions.cpp a ManagedStatic object, so that cleanup will be done on llvm_shutdown. In repeated
uses of the interpreter, where the same Function* address may get used for completely differnet functions,
this was causing a crash.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@40558 91177308-0d34-0410-b5e6-96231b3b80d8
anonymous regclass definition renaming.
Change the generated code to emit register classes as properly namespace
qualified entities like everything else.
expose the actual class definition as an object, though this isn't quite
usable yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22920 91177308-0d34-0410-b5e6-96231b3b80d8
Move include/Config and include/Support into include/llvm/Config,
include/llvm/ADT and include/llvm/Support. From here on out, all LLVM
public header files must be under include/llvm/.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@16137 91177308-0d34-0410-b5e6-96231b3b80d8
and TargetInstrDescriptor::ImplicitUses to always point to a null
terminated array and never be null. So there is no need to check for
pointer validity when iterating over those sets. Code that looked
like:
if (const unsigned* AS = TID.ImplicitDefs) {
for (int i = 0; AS[i]; ++i) {
// use AS[i]
}
}
was changed to:
for (const unsigned* AS = TID.ImplicitDefs; *AS; ++AS) {
// use *AS
}
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8960 91177308-0d34-0410-b5e6-96231b3b80d8
