AArch64 ELF uses .rela relocations so there's no need to actually make
use of the bits we're setting in the destination However, we should
make sure all bits are cleared properly since multiple runs of
resolveRelocations are possible and these could combine to produce
invalid results if stale versions remain in the code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182214 91177308-0d34-0410-b5e6-96231b3b80d8
lli's remote MCJIT code calls setExecutable just prior to running
code. In line with Darwin behaviour this seems to be the place to
invalidate any caches needed so that relocations can take effect
properly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182213 91177308-0d34-0410-b5e6-96231b3b80d8
On 32-bit hosts %p can print garbage when given a uint64_t, we should
use %llx instead. This only affects the output of the debugging text
produced by lli.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182209 91177308-0d34-0410-b5e6-96231b3b80d8
This is useful if something that looks like (x & (1 << y)) ? 64 : 32 is
the divisor in a modulo operation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182200 91177308-0d34-0410-b5e6-96231b3b80d8
We don't need to reject all inline asm as using the counter register (most does
not). Only those that explicitly clobber the counter register need to prevent
the transformation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182191 91177308-0d34-0410-b5e6-96231b3b80d8
The peephole tries to reorder MOV32r0 instructions such that they are
before the instruction that modifies EFLAGS.
The problem is that the peephole does not consider the case where the
instruction that modifies EFLAGS also depends on the previous state of
EFLAGS.
Instead, walk backwards until we find an instruction that has a def for
EFLAGS but does not have a use.
If we find such an instruction, insert the MOV32r0 before it.
If it cannot find such an instruction, skip the optimization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182184 91177308-0d34-0410-b5e6-96231b3b80d8
This patch matches GCC behavior: the code used to only allow unaligned
load/store on ARM for v6+ Darwin, it will now allow unaligned load/store
for v6+ Darwin as well as for v7+ on Linux and NaCl.
The distinction is made because v6 doesn't guarantee support (but LLVM
assumes that Apple controls hardware+kernel and therefore have
conformant v6 CPUs), whereas v7 does provide this guarantee (and
Linux/NaCl behave sanely).
The patch keeps the -arm-strict-align command line option, and adds
-arm-no-strict-align. They behave similarly to GCC's -mstrict-align and
-mnostrict-align.
I originally encountered this discrepancy in FastIsel tests which expect
unaligned load/store generation. Overall this should slightly improve
performance in most cases because of reduced I$ pressure.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182175 91177308-0d34-0410-b5e6-96231b3b80d8
The errors were:
non-constant-expression cannot be narrowed from type 'int64_t' (aka 'long') to 'uint32_t' (aka 'unsigned int') in initializer list
and
non-constant-expression cannot be narrowed from type 'long' to 'uint32_t' (aka 'unsigned int') in initializer list
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182168 91177308-0d34-0410-b5e6-96231b3b80d8
It should increase PV substitution opportunities and lower gpr
usage (pending computations path are "flushed" sooner)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182128 91177308-0d34-0410-b5e6-96231b3b80d8
Dot4 now uses 8 scalar operands instead of 2 vectors one which allows register
coalescer to remove some unneeded COPY.
This patch also defines some structures/functions that can be used to handle
every vector instructions (CUBE, Cayman special instructions...) in a similar
fashion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182126 91177308-0d34-0410-b5e6-96231b3b80d8
Almost all instructions that takes a 128 bits reg as input (fetch, export...)
have the abilities to swizzle their argument and output. Instead of printing
default swizzle for each 128 bits reg, rename T*.XYZW to T* and let instructions
print potentially optimized swizzles themselves.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182124 91177308-0d34-0410-b5e6-96231b3b80d8
Shuffles that only move an element into position 0 of the vector are common in
the output of the loop vectorizer and often generate suboptimal code when SSSE3
is not available. Lower them to vector shifts if possible.
We still prefer palignr over psrldq because it has higher throughput on
sandybridge.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182102 91177308-0d34-0410-b5e6-96231b3b80d8
This patch implements the equivalent change to r182091/r182092
in the old-style code emitter. Instead of having two separate
16-bit immediate encoding routines depending on the instruction,
this patch introduces a single encoder that checks the machine
operand flags to decide whether the low or high half of a
symbol address is required.
Since now both encoders make no further distinction between
"symbolLo" and "symbolHi", the .td operand can now use a
single getS16ImmEncoding method.
Tested by running the old-style JIT tests on 32-bit Linux.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182097 91177308-0d34-0410-b5e6-96231b3b80d8
Now that fixup_ppc_ha16 and fixup_ppc_lo16 are being treated exactly
the same everywhere, it no longer makes sense to have two fixup types.
This patch merges them both into a single type fixup_ppc_half16,
and renames fixup_ppc_lo16_ds to fixup_ppc_half16ds for consistency.
(The half16 and half16ds names are taken from the description of
relocation types in the PowerPC ABI.)
No change in code generation expected.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182092 91177308-0d34-0410-b5e6-96231b3b80d8
The current PowerPC MC back end distinguishes between fixup_ppc_ha16
and fixup_ppc_lo16, which are determined by the instruction the fixup
applies to, and uses this distinction to decide whether a fixup ought
to resolve to the high or the low part of a symbol address.
This isn't quite correct, however. It is valid -if unusual- assembler
to use, e.g.
li 1, symbol@ha
or
lis 1, symbol@l
Whether the high or the low part of the address is used depends solely
on the @ suffix, not on the instruction.
In addition, both
li 1, symbol
and
lis 1, symbol
are valid, assuming the symbol address fits into 16 bits; again, both
will then refer to the actual symbol value (so li will load the value
itself, while lis will load the value shifted by 16).
To fix this, two places need to be adapted. If the fixup cannot be
resolved at assembler time, a relocation needs to be emitted via
PPCELFObjectWriter::getRelocType. This routine already looks at
the VK_ type to determine the relocation. The only problem is that
will reject any _LO modifier in a ha16 fixup and vice versa. This
is simply incorrect; any of those modifiers ought to be accepted
for either fixup type.
If the fixup *can* be resolved at assembler time, adjustFixupValue
currently selects the high bits of the symbol value if the fixup
type is ha16. Again, this is incorrect; see the above example
lis 1, symbol
Now, in theory we'd have to respect a VK_ modifier here. However,
in fact common code never even attempts to resolve symbol references
using any nontrivial VK_ modifier at assembler time; it will always
fall back to emitting a reloc and letting the linker handle it.
If this ever changes, presumably there'd have to be a target callback
to resolve VK_ modifiers. We'd then have to handle @ha etc. there.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182091 91177308-0d34-0410-b5e6-96231b3b80d8
the JIT object (including XFAIL an ARM test that now needs fixing). Also renames
internal function for consistency.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182085 91177308-0d34-0410-b5e6-96231b3b80d8
