When we had a sequence like:
s1 = VLDRS [r0, 1], Q0<imp-def>
s3 = VLDRS [r0, 2], Q0<imp-use,kill>, Q0<imp-def>
s0 = VLDRS [r0, 0], Q0<imp-use,kill>, Q0<imp-def>
s2 = VLDRS [r0, 4], Q0<imp-use,kill>, Q0<imp-def>
we were gathering the {s0, s1} loads below the s3 load. This is fine,
but confused the verifier since now the s3 load had Q0<imp-use> with
no definition above it.
This should mark such uses <undef> as well. The liveness structure at
the beginning and end of the block is unaffected, and the true sN
definitions should prevent any dodgy reorderings being introduced
elsewhere.
rdar://problem/15124449
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192344 91177308-0d34-0410-b5e6-96231b3b80d8
This patch fixes an old FIXME by creating a MCTargetStreamer interface
and moving the target specific functions for ARM, Mips and PPC to it.
The ARM streamer is still declared in a common place because it is
used from lib/CodeGen/ARMException.cpp, but the Mips and PPC are
completely hidden in the corresponding Target directories.
I will send an email to llvmdev with instructions on how to use this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192181 91177308-0d34-0410-b5e6-96231b3b80d8
from struct byval to registers.
We used to pass 0 which means the alignment of PtrVT. Even when the alignment
of the struct is smaller than 4, the LOADs would have alignment of 4, and
further optimizations could combine the LOADs into a ldm, which would
cause crash.
The fix is to pass the alignment of the struct byval.
rdar://problem/15144402
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192126 91177308-0d34-0410-b5e6-96231b3b80d8
The hint instructions ("nop", "yield", etc) are mostly Thumb2-only, but have
been ported across to the v6M architecture. Fortunately, v6M seems to sit
nicely between v6 (thumb-1 only) and v6T2, so we can add a feature for it
fairly easily.
rdar://problem/15144406
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192097 91177308-0d34-0410-b5e6-96231b3b80d8
When MC was first added, targets could use hasRawTextSupport to keep features
working before they were added to the MC interface.
The design goal of MC is to provide an uniform api for printing assembly and
object files. Short of relaxations and other corner cases, a object file is
just another representation of the assembly.
It was never the intention that targets would keep doing things like
if (hasRawTextSupport())
Set flags in one way.
else
Set flags in another way.
When they do that they create two code paths and the object file is no longer
just another representation of the assembly. This also then requires testing
with llc -filetype=obj, which is extremelly brittle.
This patch removes some of these hacks by replacing them with smaller ones.
The ARM flag setting is trivial, so I just moved it to the constructor. For
Mips, the patch adds two temporary hack directives that allow the assembly
to represent the same things as the object file was already able to.
The hope is that the mips developers will replace the hack directives with
the same ones that gas uses and drop the -print-hack-directives flag.
I will also try to implement a target streamer interface, so that we can
move this out of the common code.
In summary, for any new work, two rules of the thumb are
* Don't use "llc -filetype=obj" in tests.
* Don't add calls to hasRawTextSupport.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192035 91177308-0d34-0410-b5e6-96231b3b80d8
optimizeSelect folds (predicated) copy instructions, it must not ignore
the original register class of the operand when replacing the register
with the copies dest register.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191963 91177308-0d34-0410-b5e6-96231b3b80d8
The jump doesn't really kill the registers, the following call does but
we never get back anyway.
This avoids some verify-machineinstrs problems when TAILJUMPs are
if-converted.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191962 91177308-0d34-0410-b5e6-96231b3b80d8
Copy over the whole register machine operand instead of creating a new one
with an incomplete set of flags.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191961 91177308-0d34-0410-b5e6-96231b3b80d8
This function-attribute modifies the callee-saved register list and function
epilogue (specifically the return instruction) so that a routine is suitable
for use as an interrupt-handler of the specified type without disrupting
user-mode applications.
rdar://problem/14207019
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191766 91177308-0d34-0410-b5e6-96231b3b80d8
For targets that have instruction itineraries this means no change. Targets
that move over to the new schedule model will use be able the new schedule
module for instruction latencies in the if-converter (the logic is such that if
there is no itineary we will use the new sched model for the latencies).
Before, we queried "TTI->getInstructionLatency()" for the instruction latency
and the extra prediction cost. Now, we query the TargetSchedule abstraction for
the instruction latency and TargetInstrInfo for the extra predictation cost. The
TargetSchedule abstraction will internally call "TTI->getInstructionLatency" if
an itinerary exists, otherwise it will use the new schedule model.
ATTENTION: Out of tree targets!
(I will also send out an email later to LLVMDev)
This means, if your target implements
unsigned getInstrLatency(const InstrItineraryData *ItinData,
const MachineInstr *MI,
unsigned *PredCost);
and returns a value for "PredCost", you now also need to implement
unsigned getPredictationCost(const MachineInstr *MI);
(if your target uses the IfConversion.cpp pass)
radar://15077010
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191671 91177308-0d34-0410-b5e6-96231b3b80d8
As specified in A8.8.72/A8.8.73/A8.8.74 in the ARM ARM, all variants of the ARM LDRD instruction have the following two constraints:
LDRD<c> <Rt>, <Rt2>, ...
(a) Rt must be even-numbered and not r14
(b) Rt2 must be R(t+1)
If those two constraints are not met the result of executing the instruction will be unpredictable.
Constraint (b) was already enforced, this commit adds support for constraint (a).
Fixes rdar://14479793.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191520 91177308-0d34-0410-b5e6-96231b3b80d8
LDRD<c> <Rt>, <Rt2>, <label>
LDRD<c> <Rt>, <Rt2>, [<Rn>{, #+/-<imm>}]
LDRD<c> <Rt>, <Rt2>, [<Rn>], #+/-<imm>
LDRD<c> <Rt>, <Rt2>, [<Rn>, #+/-<imm>]!
As specified in A8.8.72/A8.8.73 in the ARM ARM, the T1 encoding has a constraint which enforces that Rt != Rt2.
If this constraint is not met the result of executing the instruction will be unpredictable.
Fixes rdar://14479780.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191504 91177308-0d34-0410-b5e6-96231b3b80d8
Generally, it is desirable to distribute (a + b) * c to a*c + b*c for
ARM with VMLx forwarding, where a, b and c are vectors.
However, for (a + b)*(a + b), distribution will result in one extra
instruction.
With distribution:
x = a + b (add)
y = a * x (mul)
z = y + b * y (mla)
Without distribution:
x = a + b (add)
z = x * x (mul)
This patch checks if a mul is a square of add/sub. If yes, skip
distribution.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191410 91177308-0d34-0410-b5e6-96231b3b80d8
This is being disabled because it is no longer needed for
performance. It is only used by postRAscheduler which is also planned
for removal, and it is implemented with an out-dated view of register
liveness. It consideres aliases instead of register units, assumes
valid kill flags, and assumes implicit uses on partial register
defs. Kill flags and implicit operands are error prone and impossible
to verify. We should gradually eliminate dependence on them in the
postRA phases.
Targets that still benefit from this should move to the MI
scheduler. If that doesn't solve the problem, then we should add a
hook to regalloc to optimize reload placement.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191348 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, the DAGISel function WalkChainUsers was spotting that it
had entered already-selected territory by whether a node was a
MachineNode (amongst other things). Since it's fairly common practice
to insert MachineNodes during ISelLowering, this was not the correct
check.
Looking around, it seems that other nodes get their NodeId set to -1
upon selection, so this makes sure the same thing happens to all
MachineNodes and uses that characteristic to determine whether we
should stop looking for a loop during selection.
This should fix PR15840.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191165 91177308-0d34-0410-b5e6-96231b3b80d8
The 'Deprecated' class allows you to specify a SubtargetFeature that the
instruction is deprecated on.
The 'ComplexDeprecationPredicate' class allows you to define a custom
predicate that is called to check for deprecation.
For example:
ComplexDeprecationPredicate<"MCR">
would mean you would have to define the following function:
bool getMCRDeprecationInfo(MCInst &MI, MCSubtargetInfo &STI,
std::string &Info)
Which returns 'false' for not deprecated, and 'true' for deprecated
and store the warning message in 'Info'.
The MCTargetAsmParser constructor was chaned to take an extra argument of
the MCInstrInfo class, so out-of-tree targets will need to be changed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190598 91177308-0d34-0410-b5e6-96231b3b80d8
We were figuring out whether to use tPICADD or PICADD, then just using
tPICADD unconditionally anyway. Oops.
A testcase from someone familiar enough with ELF to produce one would
be appreciated. The existing PIC testcase correctly verifies the .s
generated, but that doesn't catch this bug, which only showed up in
direct-to-object mode.
http://llvm.org/bugs/show_bug.cgi?id=17180
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190417 91177308-0d34-0410-b5e6-96231b3b80d8
IT blocks can only be one instruction lonf, and can only contain a subset of
the 16 instructions.
Patch by Artyom Skrobov!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190309 91177308-0d34-0410-b5e6-96231b3b80d8
We used to generate the compact unwind encoding from the machine
instructions. However, this had the problem that if the user used `-save-temps'
or compiled their hand-written `.s' file (with CFI directives), we wouldn't
generate the compact unwind encoding.
Move the algorithm that generates the compact unwind encoding into the
MCAsmBackend. This way we can generate the encoding whether the code is from a
`.ll' or `.s' file.
<rdar://problem/13623355>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190290 91177308-0d34-0410-b5e6-96231b3b80d8
These were pretty straightforward instructions, with some assembly support
required for HLT.
The ARM assembler is keen to split the instruction mnemonic into a
(non-existent) 'H' instruction with the LT condition code. An exception for
HLT is needed.
HLT follows the same rules as BKPT when in IT blocks, so the special BKPT
hadling code has been adapted to handle HLT also.
Regression tests added including diagnostic tests for out of range immediates
and illegal condition codes, as well as negative tests for pre-ARMv8.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190053 91177308-0d34-0410-b5e6-96231b3b80d8
Solution is not sufficient to prevent 'mov pc, lr' being emitted for jump table code.
Test case doesn't trigger the added functionality.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190047 91177308-0d34-0410-b5e6-96231b3b80d8
This improves code generation for jump tables by avoiding the emission of "mov pc, lr" which could fool the processor into believing this is a return from a function causing mispredicts. The code generation logic for jump tables uses ADR to materialize the address of the jump target.
Patch by Daniel Stewart!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190043 91177308-0d34-0410-b5e6-96231b3b80d8
These instructions, such as vmul.f32, require the second source operand to
be in D0-D15 rather than the full D0-D31. When optimizing, make sure to
account for that by constraining the register class of a replacement virtual
register to be compatible with the virtual register(s) it's replacing.
I've been unsuccessful in creating a non-fragile regression test. This issue
was detected by the LLVM nightly test suite running on an A15 (Bullet).
PR17093: http://llvm.org/bugs/show_bug.cgi?id=17093
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189972 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r189648.
Fixes for the previously failing clang-side arm_neon_intrinsics test
cases will be checked in separately.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189841 91177308-0d34-0410-b5e6-96231b3b80d8
What we really want is to enable Swift by default for *v7s triples (and there already seems to be some logic which attempts to do that). In that case the iOS version doesn't matter.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189763 91177308-0d34-0410-b5e6-96231b3b80d8
In addition to recognizing when the multiply's second argument is
coming from an explicit VDUPLANE, also look for a plain scalar
f32 reference and reference it via the corresponding vector
lane.
rdar://14870054
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189619 91177308-0d34-0410-b5e6-96231b3b80d8
Fix a few things in one swoop.
# Add some negative tests.
# Fix some formatting issues.
# Add some missing IsThumb / ARMv8
# Fix some outs / ins mistakes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189490 91177308-0d34-0410-b5e6-96231b3b80d8
The usual default of "dmb ish" (inner-shareable) isn't even a valid instruction
on v6M or v7M (well, it does the same thing but software is strongly
discouraged from using it) so we should emit a full-system barrier there.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189483 91177308-0d34-0410-b5e6-96231b3b80d8
Clang is now generating cleaner IR, so this removes the old variants which
should be completely unused.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189481 91177308-0d34-0410-b5e6-96231b3b80d8
The vqdmlal and vqdmlls instructions are really just a fused pair consisting of
a vqdmull.sN and a vqadd.sN. This adds patterns to LLVM so that we can switch
Clang's CodeGen over to generating these instead of the special vqdmlal
intrinsics.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189480 91177308-0d34-0410-b5e6-96231b3b80d8
These instructions aren't particularly complicated and it's well worth having
patterns for some reasonably useful LLVM IR that will match them. Soon we
should be able to switch Clang over to producing this natural version.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189335 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commits r189319 and r189315. r189315 broke some tests on what I
believe are big-endian platforms.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189321 91177308-0d34-0410-b5e6-96231b3b80d8
Get the register class right for the TST instruction. This keeps the
machine verifier happy, enabling us to turn it on for another test.
rdar://12594152
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189274 91177308-0d34-0410-b5e6-96231b3b80d8
Constant pool and global value reference instructions need more
restricted register classes than plain GPR.
rdar://12594152
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189270 91177308-0d34-0410-b5e6-96231b3b80d8
The create machine code wasn't properly in SSA, which the machine verifier
properly complains about. Now that fast-isel is closer to verifier clean,
errors like this show up more clearly.
Additionally, the Thumb pseudo tPICADD was used for both ARM and Thumb
mode functions, which is obviously wrong. Fix that along the way.
Test case is part of the following commit which will finish making an
additional fast-isel test verifier clean an enable it for the
regression test suite. This commit is separate since its not just
a verifier cleanup, but an actual correctness issue.
rdar://12594152 (for the fast-isel verifier aspects)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189269 91177308-0d34-0410-b5e6-96231b3b80d8
I'd forgotten that "Requires" blocks override rather than add to the
constraints, so my pseudo-instruction was being selected in Thumb mode leading
to nonsense instructions.
rdar://problem/14817358
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189096 91177308-0d34-0410-b5e6-96231b3b80d8
This uses the ARMcmov pattern that Tim cleaned up in r188995.
Thanks to Simon Tatham for his floating point help!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189024 91177308-0d34-0410-b5e6-96231b3b80d8
The instruction to convert between floating point and fixed point representations
takes an immediate operand for the number of fractional bits of the fixed point
value. ARMARM specifies that when that number of bits is zero, the assembler
should encode floating point/integer conversion instructions.
This patch adds the necessary instruction aliases to achieve this behaviour.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189009 91177308-0d34-0410-b5e6-96231b3b80d8
The function call to external function should come with PLT relocation
type if the PIC relocation model is used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189002 91177308-0d34-0410-b5e6-96231b3b80d8
Back in the mists of time (2008), it seems TableGen couldn't handle the
patterns necessary to match ARM's CMOV node that we convert select operations
to, so we wrote a lot of fairly hairy C++ to do it for us.
TableGen can deal with it now: there were a few minor differences to CodeGen
(see tests), but nothing obviously worse that I could see, so we should
probably address anything that *does* come up in a localised manner.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188995 91177308-0d34-0410-b5e6-96231b3b80d8
The code for 'Q' and 'R' operand modifiers needs to look through tied
operands to discover the register class.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188990 91177308-0d34-0410-b5e6-96231b3b80d8
Indirect tail-calls shouldn't use R9 for the branch destination, as
it's not reliably a call-clobbered register.
rdar://14793425
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188967 91177308-0d34-0410-b5e6-96231b3b80d8
According to the ARM specification, "mov" is a valid mnemonic for all Thumb2 MOV encodings.
To achieve this, the patch adds one instruction alias with a special range condition to avoid collision with the Thumb1 MOV.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188901 91177308-0d34-0410-b5e6-96231b3b80d8
Update testcase to be more careful about checking register
values. While regexes are general goodness for these sorts of
testcases, in this example, the registers are constrained by
the calling convention, so we can and should check their
explicit values.
rdar://14779513
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188819 91177308-0d34-0410-b5e6-96231b3b80d8
Previously we used a const-pool load for virtually all 64-bit floating values.
Actually, we can get quite a few common values (including 0.0, 1.0) via "vmov"
instructions of one stripe or another.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188773 91177308-0d34-0410-b5e6-96231b3b80d8
The Thumb2 add immediate is in fact defined for SP. The manual is misleading as it points to a different section for add immediate with SP, however the encoding is the same as for add immediate with register only with the SP operand hard coded. As such add immediate with SP and add immediate with register can safely be treated as the same instruction.
All the patch does is adjust a register constraint on an instruction alias.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188676 91177308-0d34-0410-b5e6-96231b3b80d8
When patching inlineasm nodes to use GPRPair for 64-bit values, we
were dropping the information that two operands were tied, which
effectively broke the live-interval of vregs affected.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188643 91177308-0d34-0410-b5e6-96231b3b80d8
Properly constrain the operand register class for instructions used
in [sz]ext expansion. Update more tests to use the verifier now that
we're getting the register classes correct.
rdar://12594152
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188594 91177308-0d34-0410-b5e6-96231b3b80d8
Teach the generic instruction selection helper functions to constrain
the register classes of their input operands. For non-physical register
references, the generic code needs to be careful not to mess that up
when replacing references to result registers. As the comment indicates
for MachineRegisterInfo::replaceRegWith(), it's important to call
constrainRegClass() first.
rdar://12594152
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188593 91177308-0d34-0410-b5e6-96231b3b80d8
Lots of machine verifier errors result from using a plain GPR regclass
for incoming argument copies. A more restrictive rGPR class is more
appropriate since it more accurately represents what's happening, plus
it lines up better with isel later on so the verifier is happier.
Reduces the number of ARM fast-isel tests not running with the verifier
enabled by over half.
rdar://12594152
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188592 91177308-0d34-0410-b5e6-96231b3b80d8
This unbreaks PIC with fast isel on ELF targets (PR16717). The output matches
what GCC and SDag do for PIC but may not cover all of the many flavors of PIC
that exist.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188551 91177308-0d34-0410-b5e6-96231b3b80d8
Thumb2 literal loads use an offset encoding which allows for
negative zero. This fixes parsing and encoding so that #-0
is correctly processed. The parser represents #-0 as INT32_MIN.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188549 91177308-0d34-0410-b5e6-96231b3b80d8
There are many Thumb instructions which take 12-bit immediates encoded in a special
8-byte value + 4-byte rotator form. Not all numbers are represented, and it's legal
to transform an assembly instruction to be able to encode the immediate.
For example: AND and BIC are complementary instructions; one can switch the AND
to a BIC as long as the immediate is complemented.
The intent is to switch one instruction into its complementary one when the immediate
cannot be encoded in the form requested in the original assembly and when the
complementary immediate is encodable.
The patch addresses two issues:
1. definition of t2SOImmNot immediate - it has to check that the orignal value is
not encoded naturally
2. t2AND and t2BIC instruction aliases which should use the Thumb2 SOImm operand
rather than the ARM one.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188548 91177308-0d34-0410-b5e6-96231b3b80d8
Before this patch this flag is IOS specific, but is also
useful for bare project like bootloaders / kernels etc,
since movw / movt prevents simple relocation. Therefore
make this flag more commonly available.
note: this patch depends on a similiar rename in clang
Patch by Jeroen Hofstee.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188487 91177308-0d34-0410-b5e6-96231b3b80d8
r9 is defined as a platform-specific register in the ARM EABI.
It can be reserved for a special purpose or be used as a general
purpose register. Add support for reserving r9 for all ARM, while
leaving the IOS usage unchanged.
Patch by Jeroen Hofstee.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188485 91177308-0d34-0410-b5e6-96231b3b80d8
1. The offset range for Thumb1 PC relative loads is [0..1020] and not [-1024..1020]
2. Thumb2 PC relative loads may define the PC, so the restriction placed on target register is removed
3. Removes unneeded alias between "ldr.n" and t1LDRpci. ".n" is actually stripped by both tablegen
and the ASM parser, so this alias rule really does nothing
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188466 91177308-0d34-0410-b5e6-96231b3b80d8
When determining if two different loads are from the same base address,
this patch allows one load to use a t2LDRi8 address mode and another to
use a t2LDRi12 address mode. The current implementation is very
conservative and this allows the case of differing Thumb2 byte loads to
be considered. Allowing these differing modes instead of forcing the exact
same opcode is useful for situations where one opcodes loads from a base
address+1 and a second opcode loads for a base address-1.
Patch by Daniel Stewart.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188385 91177308-0d34-0410-b5e6-96231b3b80d8
Use it to avoid repeating ourselves too often. Also store MVT::SimpleValueType
in the TTI tables so they can be statically initialized, MVT's constructors
create bloated initialization code otherwise.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188095 91177308-0d34-0410-b5e6-96231b3b80d8
In Thumb1, only one variant is supported: CPS{effect} {flags}
Thumb2 supports three:
CPS{effect}.W {flags}
CPS{effect} {flags} {mode}
CPS {mode}
Canonically, .W should be used only when ambiguity is present between encodings of different width.
The wide suffix is still accepted for the latter two forms via aliases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188071 91177308-0d34-0410-b5e6-96231b3b80d8
The long encoding for Thumb2 unconditional branches is broken.
Additionally, there is no range checking for target operands; as such
for instructions originating in assembly code, only short Thumb encodings
are generated, regardless of the bitsize needed for the offset.
Adding range checking is non trivial due to the representation of Thumb
branch instructions. There is no true difference between conditional and
unconditional branches in terms of operands and syntax - even unconditional
branches have a predicate which is expected to match that of the IT block
they are in. Yet, the encodings and the permitted size of the offset differ.
Due to this, for any mnemonic there are really 4 encodings to choose for.
The problem cannot be handled in the parser alone or by manipulating td files.
Because the parser builds first a set of match candidates and then checks them
one by one, whatever tablegen-only solution might be found will ultimately be
dependent of the parser's evaluation order. What's worse is that due to the fact
that all branches have the same syntax and the same kinds of operands, that
order is governed by the lexicographical ordering of the names of operand
classes...
To circumvent all this, any necessary disambiguation is added to the instruction
validation pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188067 91177308-0d34-0410-b5e6-96231b3b80d8
This is the only Thumb2 instruction defined with "t" prefix; all other Thumb2 instructions have "t2" prefix (e.g. "t2CDP2" which is defined immediately afterwards).
Patch by Artyom Skrobov.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187973 91177308-0d34-0410-b5e6-96231b3b80d8
Without explicit dependencies, both per-file action and in-CommonTableGen action could run in parallel.
It races to emit *.inc files simultaneously.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187780 91177308-0d34-0410-b5e6-96231b3b80d8
Using an object to do the cleanup may look like overkill, but it's safer and nicer than putting deletes everywhere.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187696 91177308-0d34-0410-b5e6-96231b3b80d8
This patch fixes the multiple breakages on ARM test-suite after the SLP
vectorizer was introduced by default on O3. The problem was an illegal
vector type on ARMTTI::getCmpSelInstrCost() <3 x i1> which is not simple.
The guard protects this code from breaking (cause of the problems) but
doesn't fix the issue that is generating the odd vector in the first
place, which also needs to be investigated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187658 91177308-0d34-0410-b5e6-96231b3b80d8
Function attributes are the future! So just query whether we want to realign the
stack directly from the function instead of through a random target options
structure.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187618 91177308-0d34-0410-b5e6-96231b3b80d8
While the .td entry is nice and all, it takes a pretty gross hack in
ARMAsmParser::ParseInstruction() because of handling of other "subs"
instructions to get it to match. Ran it by Jim Grosbach and he said it was
about what he expected to make this work given the existing code.
rdar://14214063
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187530 91177308-0d34-0410-b5e6-96231b3b80d8
When simplifying a (or (and B A) (and C ~A)) to a (VBSL A B C) ensure that the
bitwidth of the second operands to both ands match before comparing the negation
of the values.
Split the check of the value of the second operands to the ands. Move the cast
and variable declaration slightly higher to make it slightly easier to follow.
Bug-Id: 16700
Signed-off-by: Saleem Abdulrasool <compnerd@compnerd.org>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187404 91177308-0d34-0410-b5e6-96231b3b80d8
do in the SDag when lowering references to the GOT: use
ARMConstantPoolSymbol rather than creating a dummy global variable. The
computation of the alignment still feels weird (it uses IR types and
datalayout) but it preserves the exact previous behavior. This change
fixes the memory leak of the global variable detected on the valgrind
leak checking bot.
Thanks to Benjamin Kramer for pointing me at ARMConstantPoolSymbol to
handle this use case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187303 91177308-0d34-0410-b5e6-96231b3b80d8
me) should start watching this bot more as its catching lots of bugs.
The fix here is to not construct the global if we aren't going to need
it. That's cheaper anyways, and globals have highly predictable types in
practice. I've added an assert to catch skew between our manual testing
of the type and the actual type just for paranoia's sake.
Note that this pattern is actually fine in most globals because when you
build a global with a module it automatically is moved to be owned by
that module. But here, we're in isel and don't really want to do that.
The solution of not creating a global is simpler anyways.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187302 91177308-0d34-0410-b5e6-96231b3b80d8
When vectors are built from a single value, the ARM lowering issues a
scalar_to_vector node.
This node is then always morphed into a move from the general purpose unit to
the vector unit.
When the value comes from a load, this can be simplified into a vector load to
the right lane.
This patch changes the lowering of insert_vector_elt to expose a vector
friendly pattern in this situation.
This is a step toward fixing <rdar://problem/14170854>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186999 91177308-0d34-0410-b5e6-96231b3b80d8
instructions. With this patch:
1. ldr.n is recognized as mnemonic for the short encoding
2. ldr.w is recognized as menmonic for the long encoding
3. ldr will map to either short or long encodings depending on the size of the offset
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186831 91177308-0d34-0410-b5e6-96231b3b80d8
After Ulrich's r180677 (thanks!) TableGen is intelligent enough to
handle tied constraints involving complex operands properly, so
virtually all of the ARM custom converters are now unnecessary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186810 91177308-0d34-0410-b5e6-96231b3b80d8
indirect branches correctly. Under some circumstances, this led to the deletion
of basic blocks that were the destination of indirect branches. In that case it
left indirect branches to nowhere in the code.
This patch replaces, and is more general than either of the previous fixes for
indirect-branch-analysis issues, r181161 and r186461.
For other branches (not indirect) this refactor should have *almost* identical
behavior to the previous version. There are some corner cases where this
refactor is able to analyze blocks that the previous version could not (e.g.
this necessitated the update to thumb2-ifcvt2.ll).
<rdar://problem/14464830>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186735 91177308-0d34-0410-b5e6-96231b3b80d8
This adds a new class for non-predicable NEON instructions and a
new DecoderNamespace for v8 NEON instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186504 91177308-0d34-0410-b5e6-96231b3b80d8
My patch 'r183551 - ARM FastISel integer sext/zext improvements' was incorrect when emitting ARM register-immediate ASR, LSL, LSR instructions: they are pseudo-instructions in ARMInstrInfo.td and I should have used MOVsi instead.
This is not an issue when code is generated through a .s file, but is an issue when generated straight to a .o (-filetype=obj).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186489 91177308-0d34-0410-b5e6-96231b3b80d8
block. Blocks that have an indirect branch terminator, even if it's not the
last terminator, should still be treated as unanalyzable.
<rdar://problem/14437274>
Reducing a useful regression test case is proving difficult - I hope to have
one soon.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186461 91177308-0d34-0410-b5e6-96231b3b80d8
This adds an instruction alias to make the assembler recognize the alternate literal form: pli [PC, #+/-<imm>]
See A8.8.129 in the ARM ARM (DDI 0406C.b).
Fixes <rdar://problem/14403733>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186459 91177308-0d34-0410-b5e6-96231b3b80d8
We'd forgotten to provide string representations for the special ARMISD atomic
nodes; this adds them in. No effect on CodeGen, just makes the output of
"-view-whatever-dags" slightly more readable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186406 91177308-0d34-0410-b5e6-96231b3b80d8
Intrinsics already existed for the 64-bit variants, so these support operations
of size at most 32-bits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186392 91177308-0d34-0410-b5e6-96231b3b80d8
This patch enables calls to __aeabi_idivmod when in EABI mode,
by using the remainder value returned on registers (R1),
enabled by the ARM triple "none-eabi". Note that Darwin and
GNUEABI triples will continue lowering on GNU style, that is,
using the stack for the remainder.
Still need to add SREM/UREM support fix for 64-bit lowering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186390 91177308-0d34-0410-b5e6-96231b3b80d8
ARM paired GPR COPY was being lowered to two MOVr without CC. This
patch puts the CC back.
My test is a reduction of the case where I encountered the issue,
64-bit atomics use paired GPRs.
The issue only occurs with selectionDAG, FastISel doesn't encounter it
so I didn't bother calling it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186226 91177308-0d34-0410-b5e6-96231b3b80d8
Fixes a 35% degradation compared to unvectorized code in
MiBench/automotive-susan and an equally serious regression on a private
image processing benchmark.
radar://14351991
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186188 91177308-0d34-0410-b5e6-96231b3b80d8
Address calculation for gather/scather in vectorized code can incur a
significant cost making vectorization unbeneficial. Add infrastructure to add
cost.
Tests and cost model for targets will be in follow-up commits.
radar://14351991
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186187 91177308-0d34-0410-b5e6-96231b3b80d8