where the argument is an apint, or smaller than the minimum
size for which there is a libcall (i32).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58994 91177308-0d34-0410-b5e6-96231b3b80d8
inform the optimizers that the result must be zero/
sign extended from the smaller type. For example,
if a fp to unsigned i16 is promoted to fp to i32,
then we are allowed to assume that the extra 16 bits
are zero (because the result of fp to i16 is undefined
if the result does not fit in an i16). This is
quite aggressive, but should help the optimizers
produce better code. This requires correcting a
test which thought that fp_to_uint is some kind
of truncation, which it is not: in the testcase
(which does fp to i1), either the fp value converts
to 0 or 1 or the result is undefined, which is
quite different to truncation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58991 91177308-0d34-0410-b5e6-96231b3b80d8
original code was matching like this:
if (match(A, m_Not(m_Value(B))))
B was already matched as a 'select' instruction. However, this isn't matching
what we think it's matching. It would match B as a 'Value', so basically
anything would match to it. In this case, a Constant matched. B was replaced
with a constant representation. And then the wrong value would be used in the
SelectInst::Create statement, causing a crash.
After thinking on this for a moment, and after Nick L. told me how the pattern
matching stuff was supposed to work, the solution was to match NOT an m_Value,
but an m_Select.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58946 91177308-0d34-0410-b5e6-96231b3b80d8
to generate signed ICMP instructions to replace the FCMP. This would violate
the following:
define i1 @test1(i32 %val) {
%1 = uitofp i32 %val to double
%2 = fcmp ole double %1, 0.000000e+00
ret i1 %2
}
would be transformed into:
define i1 @test1(i32 %val) {
%1 = icmp slt i33 %val, 1
ret i1 %1
}
which is obviously wrong. This patch modifes InstCombiner::FoldFCmp_IntToFP_Cst
to handle when the LHS comes from UIToFP.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58929 91177308-0d34-0410-b5e6-96231b3b80d8
is noticeably worse than previous PPC-specific code.
Since the latter was also wrong in some cases and
correctness is more important than efficiency, I'm
disabling this test temporarily while I fix it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58876 91177308-0d34-0410-b5e6-96231b3b80d8
dead nodes, but in this case its missing one. Fixing the DAGCombiner
is desirable, but it's somewhat involved.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58777 91177308-0d34-0410-b5e6-96231b3b80d8
have its node id set. The new and and shift nodes are the nodes that need
the IDs. This fixes PR2982.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58655 91177308-0d34-0410-b5e6-96231b3b80d8
This allows SCEV users to effectively calculate trip count.
LSR later on transforms back integer IVs to floating point IVs
later on to avoid int-to-float casts inside the loop.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58625 91177308-0d34-0410-b5e6-96231b3b80d8
bits, use a union of a SimpleValueType enum and a regular Type*.
This increases the size of MVT on 64-bit hosts from 32 bits to 64 bits.
In most cases, this doesn't add significant overhead. There are places
in codegen that use arrays of MVTs, so these are now larger, but
they're small in common cases.
This eliminates restrictions on the size of integer types and vector
types that can be represented in codegen. As the included testcase
demonstrates, it's now possible to codegen very large add operations.
There are still some complications with using very large types. PR2880
is still open so they can't be used as return values on normal targets,
there are no libcalls defined for very large integers so operations
like multiply and divide aren't supported.
This also introduces a minimal tablgen Type library, capable of
handling IntegerType and VectorType. This will allow parts of
TableGen that don't depend on using SimpleValueType values to handle
arbitrary integer and vector types.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58623 91177308-0d34-0410-b5e6-96231b3b80d8
* merge two weak functions by making them both alias a third non-weak fn
* don't reimplement CallSite::hasArgument
* whitelist the safe linkage types
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58568 91177308-0d34-0410-b5e6-96231b3b80d8
This triggers only 60 times in llvm-test (look at .llvm.bc, not .linked.rbc)
and so it probably wont be turned on by default. Also, may of those are likely
to go away when PR2973 is fixed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58557 91177308-0d34-0410-b5e6-96231b3b80d8
function.
- This explicitly models the costs for functions which should
"always" or "never" be inlined. This fixes bugs where such costs
were not previously respected.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58450 91177308-0d34-0410-b5e6-96231b3b80d8
so that va_start/va_arg/et.al. will walk arguments correctly for Cell SPU.
N.B.: Because neither clang nor llvm-gcc-4.2 can be built for CellSPU, this is
still unexorcised code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58415 91177308-0d34-0410-b5e6-96231b3b80d8
ppcf128 to i32 conversion and expand it into a code
sequence like in LegalizeDAG. This needs custom
ppc lowering of FP_ROUND_INREG, so turn that on and
make it work with LegalizeTypes. Probably PPC should
simply custom lower the original conversion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58329 91177308-0d34-0410-b5e6-96231b3b80d8
id could end up being wrong mostly because of
forgetting to remap new nodes that morphed into
processed nodes through CSE.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58323 91177308-0d34-0410-b5e6-96231b3b80d8
a memset using 16-byte XMM stores, but where the stack realignment code
didn't work. Until it does (PR2962) disable use of xmm regs in memcpy
and memset formation for linux and other targets with insufficiently
aligned stacks.
This is part of PR2888
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58317 91177308-0d34-0410-b5e6-96231b3b80d8
LHS is a foldable load, then LHS and RHS are swapped
and SetCCOpcode is changed to SETUGT. But the later
code is expecting operands to be the wrong way round
for SETUGT, but they are not in this case, resulting
in an inverted compare. The solution is to move the
load normalization before the correction for SETUGT.
This bug was tickled by LegalizeTypes which happened
to legalize the testcase slightly differently to
LegalizeDAG.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58092 91177308-0d34-0410-b5e6-96231b3b80d8
in the 32-bit signed offset field of addresses. Even though this
may be intended, some linkers refuse to relocate code where the
relocated address computation overflows.
Also, fix the sign-extension of constant offsets to use the
actual pointer size, rather than the size of the GlobalAddress
node, which may be different, for example on x86-64 where MVT::i32
is used when the address is being fit into the 32-bit displacement
field.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57885 91177308-0d34-0410-b5e6-96231b3b80d8
Where previously LLVM might emit code like this:
ucomisd %xmm1, %xmm0
setne %al
setp %cl
orb %al, %cl
jne .LBB4_2
it now emits this:
ucomisd %xmm1, %xmm0
jne .LBB4_2
jp .LBB4_2
It has fewer instructions and uses fewer registers, but it does
have more branches. And in the case that this code is followed by
a non-fallthrough edge, it may be followed by a jmp instruction,
resulting in three branch instructions in sequence. Some effort
is made to avoid this situation.
To achieve this, X86ISelLowering.cpp now recognizes FCMP_OEQ and
FCMP_UNE in lowered form, and replace them with code that emits
two branches, except in the case where it would require converting
a fall-through edge to an explicit branch.
Also, X86InstrInfo.cpp's branch analysis and transform code now
knows now to handle blocks with multiple conditional branches. It
uses loops instead of having fixed checks for up to two
instructions. It can now analyze and transform code generated
from FCMP_OEQ and FCMP_UNE.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57873 91177308-0d34-0410-b5e6-96231b3b80d8
the copy instruction from the instruction list before asking the
target to create the new instruction. This gets the old instruction
out of the way so that it doesn't interfere with the target's
rematerialization code. In the case of x86, this helps it find
more cases where EFLAGS is not live.
Also, in the X86InstrInfo.cpp, teach isSafeToClobberEFLAGS to check
to see if it reached the end of the block after scanning each
instruction, instead of just before. This lets it notice when the
end of the block is only two instructions away, without doing any
additional scanning.
These changes allow rematerialization to clobber EFLAGS in more
cases, for example using xor instead of mov to set the return value
to zero in the included testcase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57872 91177308-0d34-0410-b5e6-96231b3b80d8
for strange asm conditions earlier. In this case, we have a
double being passed in an integer reg class. Convert to like
sized integer register so that we allocate the right number
for the class (two i32's for the f64 in this case).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57862 91177308-0d34-0410-b5e6-96231b3b80d8
the previous patch this one actually passes make check.
"Fix PR2356 on PowerPC: if we have an input and output that are tied together
that have different sizes (e.g. i32 and i64) make sure to reserve registers for
the bigger operand."
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57771 91177308-0d34-0410-b5e6-96231b3b80d8
and add a TargetLowering hook for it to use to determine when this
is legal (i.e. not in PIC mode, etc.)
This allows instruction selection to emit folded constant offsets
in more cases, such as the included testcase, eliminating the need
for explicit arithmetic instructions.
This eliminates the need for the C++ code in X86ISelDAGToDAG.cpp
that attempted to achieve the same effect, but wasn't as effective.
Also, fix handling of offsets in GlobalAddressSDNodes in several
places, including changing GlobalAddressSDNode's offset from
int to int64_t.
The Mips, Alpha, Sparc, and CellSPU targets appear to be
unaware of GlobalAddress offsets currently, so set the hook to
false on those targets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57748 91177308-0d34-0410-b5e6-96231b3b80d8
have an unreachable block in a function. This was triggering the assert. This is
a horrid hack to cover this up.
Oh! for a good debug info architecture!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57714 91177308-0d34-0410-b5e6-96231b3b80d8
in 32-bit mode instead of assigning a register pair. This has nothing to
do with PR2356, but I happened to notice it while working on it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57704 91177308-0d34-0410-b5e6-96231b3b80d8
use a SUB instruction instead of an ADD, because -128 can be
encoded in an 8-bit signed immediate field, while +128 can't be.
This avoids the need for a 32-bit immediate field in this case.
A similar optimization applies to 64-bit adds with 0x80000000,
with the 32-bit signed immediate field.
To support this, teach tablegen how to handle 64-bit constants.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57663 91177308-0d34-0410-b5e6-96231b3b80d8
shift counts, and patterns that match dynamic shift counts
when the subtract is obscured by a truncate node.
Add DAGCombiner support for recognizing rotate patterns
when the shift counts are defined by truncate nodes.
Fix and simplify the code for commuting shld and shrd
instructions to work even when the given instruction doesn't
have a parent, and when the caller needs a new instruction.
These changes allow LLVM to use the shld, shrd, rol, and ror
instructions on x86 to replace equivalent code using two
shifts and an or in many more cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57662 91177308-0d34-0410-b5e6-96231b3b80d8
to find opportunities for store-to-load forwarding or load CSE,
in the same way that visitStore scans back to do DSE. Also, define
a new helper function for testing whether the addresses of two
memory accesses are known to have the same value, and use it in
both visitStore and visitLoad.
These two changes allow instcombine to eliminate loads in code
produced by front-ends that frequently emit obviously redundant
addressing for memory references.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57608 91177308-0d34-0410-b5e6-96231b3b80d8
integer type. Invalid things like 'float 42' are now rejected by the
semantic analysis in the productions not the parser. This fixes PR2733.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57560 91177308-0d34-0410-b5e6-96231b3b80d8
i.e. conditions that cannot be checked with a single instruction. For example,
SETONE and SETUEQ on x86.
- Teach legalizer to implement *illegal* setcc as a and / or of a number of
legal setcc nodes. For now, only implement FP conditions. e.g. SETONE is
implemented as SETO & SETNE, SETUEQ is SETUO | SETEQ.
- Move x86 target over.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57542 91177308-0d34-0410-b5e6-96231b3b80d8
- Renumber fcmp predicates to match their icmp counterparts.
- Try swapping operands to expose more optimization opportunities.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57513 91177308-0d34-0410-b5e6-96231b3b80d8
create a new DAG node to represent the new shift to keep the
DAG consistent, even though it'll almost always be folded into
the address.
If a user of the resulting address has multiple uses, the
nodes may get revisited by a later MatchAddress call, in which
case DAG inconsistencies do matter.
This fixes PR2849.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57465 91177308-0d34-0410-b5e6-96231b3b80d8
not built with 64 bit support. Since this test
passes without -m64 on x86-32-linux, just remove
the -m64.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57462 91177308-0d34-0410-b5e6-96231b3b80d8
parameters instead of raw Constants. This prevents the constants from
being selected by the isel pass, fixing PR2735.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57385 91177308-0d34-0410-b5e6-96231b3b80d8
instead.
So now: -fast-isel or -fast-isel=true enable fast-isel, and
-fast-isel=false disables it. Fast-isel is also on by default
with -fast, and off by default otherwise.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57270 91177308-0d34-0410-b5e6-96231b3b80d8
beware of the 42000 leaks reported by valgrind in the Constant.cpp + Type.cpp files. it needs fixing IMHO
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57245 91177308-0d34-0410-b5e6-96231b3b80d8
are Inexact. (These are not Inexact as defined
by IEEE754, but that seems like a reasonable way
to abstract what happens: information is lost.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57218 91177308-0d34-0410-b5e6-96231b3b80d8
This includes not marking a GEP involving a vector as unsafe, but only when it
has all zero indices. This allows scalarrepl to work in a few more cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57177 91177308-0d34-0410-b5e6-96231b3b80d8
Before there were two problems: (1) configure
turned "obj-c++" into "obj" in the langs line;
(2) the dejagnu library called it objc++ not
obj-c++.
Now the problem is that some of these tests don't
pass!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57167 91177308-0d34-0410-b5e6-96231b3b80d8
shifting and masking inside a bswap expr. This allows it to handle
the cases from PR2842, which involve the intermediate 'or'
expressions being shifted, not just the input value.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57095 91177308-0d34-0410-b5e6-96231b3b80d8
when deciding whether to mark a function readnone/readonly.
Since the pass is currently run before SROA, this may be
quite helpful. Requested by Chris on IRC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57050 91177308-0d34-0410-b5e6-96231b3b80d8
was setting kill flags on tied uses in two-address instructions.
The kill flags were causing the allocator to think it could
allocate the use and its tied def in different registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57039 91177308-0d34-0410-b5e6-96231b3b80d8
