Commit Graph

161 Commits

Author SHA1 Message Date
Evan Cheng
e88d5cee9d Thumb2 pre/post indexed loads.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74696 91177308-0d34-0410-b5e6-96231b3b80d8
2009-07-02 07:28:31 +00:00
Evan Cheng
af4550f826 Factor out ARM indexed load matching code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74681 91177308-0d34-0410-b5e6-96231b3b80d8
2009-07-02 01:23:32 +00:00
Bob Wilson
8b024a5eb5 Add a new addressing mode for NEON load/store instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74658 91177308-0d34-0410-b5e6-96231b3b80d8
2009-07-01 23:16:05 +00:00
David Goodwin
6647cea111 Thumb-2 load and store double description. But nothing yet creates them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74566 91177308-0d34-0410-b5e6-96231b3b80d8
2009-06-30 22:50:01 +00:00
David Goodwin
5e47a9a6e4 Add conditional and unconditional thumb-2 branch. Add thumb-2 jump table.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74543 91177308-0d34-0410-b5e6-96231b3b80d8
2009-06-30 18:04:13 +00:00
Evan Cheng
055b0310f8 Implement Thumb2 ldr.
After much back and forth, I decided to deviate from ARM design and split LDR into 4 instructions (r + imm12, r + imm8, r + r << imm12, constantpool). The advantage of this is 1) it follows the latest ARM technical manual, and 2) makes it easier to reduce the width of the instruction later. The down side is this creates more inconsistency between the two sub-targets. We should split ARM LDR instruction in a similar fashion later. I've added a README entry for this.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74420 91177308-0d34-0410-b5e6-96231b3b80d8
2009-06-29 07:51:04 +00:00
Evan Cheng
9cb9e6778c Renaming for consistency.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74368 91177308-0d34-0410-b5e6-96231b3b80d8
2009-06-27 02:26:13 +00:00
Anton Korobeynikov
d49ea77cbc Split thumb-related stuff into separate classes.
Step 1: ARMInstructionInfo => {ARM,Thumb}InstructionInfo

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74329 91177308-0d34-0410-b5e6-96231b3b80d8
2009-06-26 21:28:53 +00:00
Evan Cheng
e870af4837 Code clean up.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73986 91177308-0d34-0410-b5e6-96231b3b80d8
2009-06-23 19:38:34 +00:00
Evan Cheng
e499f97058 Rename SelectShifterOperand to SelectThumb2ShifterOperandReg.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73975 91177308-0d34-0410-b5e6-96231b3b80d8
2009-06-23 18:14:38 +00:00
Bob Wilson
5bafff36c7 Add support for ARM's Advanced SIMD (NEON) instruction set.
This is still a work in progress but most of the NEON instruction set
is supported.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73919 91177308-0d34-0410-b5e6-96231b3b80d8
2009-06-22 23:27:02 +00:00
Bob Wilson
e64e3cf9ad Fix llvm-gcc build for armv6t2 and later architectures. The hasV6T2Ops
predicate does not check if Thumb mode is enabled, and when in ARM mode
there are still some checks for constant-pool use that need to run.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73887 91177308-0d34-0410-b5e6-96231b3b80d8
2009-06-22 17:29:13 +00:00
Anton Korobeynikov
52237119a9 Initial support for some Thumb2 instructions.
Patch by Viktor Kutuzov and Anton Korzh from Access Softek, Inc.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73622 91177308-0d34-0410-b5e6-96231b3b80d8
2009-06-17 18:13:58 +00:00
Anton Korobeynikov
dada95b5b3 Revert hunk commited by accident
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73097 91177308-0d34-0410-b5e6-96231b3b80d8
2009-06-08 22:57:18 +00:00
Anton Korobeynikov
0eebf653a7 The attached patches implement most of the ARM AAPCS-VFP hard float
ABI. The missing piece is support for putting "homogeneous aggregates"
into registers.

Patch by Sandeep Patel!

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73095 91177308-0d34-0410-b5e6-96231b3b80d8
2009-06-08 22:53:56 +00:00
Bob Wilson
224c244f56 Fix pr4091: Add support for "m" constraint in ARM inline assembly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72105 91177308-0d34-0410-b5e6-96231b3b80d8
2009-05-19 05:53:42 +00:00
Jim Grosbach
30eae3c022 PR2985 / <rdar://problem/6584986>
When compiling in Thumb mode, only the low (R0-R7) registers are available
for most instructions. Breaking the low registers into a new register class
handles this. Uses of R12, SP, etc, are handled explicitly where needed
with copies inserted to move results into low registers where the rest of
the code generator can deal with them.



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@68545 91177308-0d34-0410-b5e6-96231b3b80d8
2009-04-07 20:34:09 +00:00
Evan Cheng
9d7b5309c2 tADDhirr is a thumb instruction. Do not allow this code to be reached in non-thumb mode.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67765 91177308-0d34-0410-b5e6-96231b3b80d8
2009-03-26 19:09:01 +00:00
Chris Lattner
8c4d1b2bcf fix PR3538 for ARM.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@64384 91177308-0d34-0410-b5e6-96231b3b80d8
2009-02-12 17:38:23 +00:00
Dale Johannesen
f5f5dce897 Eliminate remaining non-DebugLoc version of getTargetNode.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63951 91177308-0d34-0410-b5e6-96231b3b80d8
2009-02-06 19:16:40 +00:00
Dale Johannesen
f90b2a7742 get rid of some non-DebugLoc getTargetNode variants.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63909 91177308-0d34-0410-b5e6-96231b3b80d8
2009-02-06 02:08:06 +00:00
Dale Johannesen
ed2eee63a6 Get rid of one more non-DebugLoc getNode and
its corresponding getTargetNode.  Lots of
caller changes.



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63904 91177308-0d34-0410-b5e6-96231b3b80d8
2009-02-06 01:31:28 +00:00
Dan Gohman
79ce276083 Move a few containers out of ScheduleDAGInstrs::BuildSchedGraph
and into the ScheduleDAGInstrs class, so that they don't get
destructed and re-constructed for each block. This fixes a
compile-time hot spot in the post-pass scheduler.

To help facilitate this, tidy and do some minor reorganization
in the scheduler constructor functions.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@62275 91177308-0d34-0410-b5e6-96231b3b80d8
2009-01-15 19:20:50 +00:00
Evan Cheng
e5ad88e97f Preliminary ARM debug support based on patch by Mikael of FlexyCore.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60851 91177308-0d34-0410-b5e6-96231b3b80d8
2008-12-10 21:54:21 +00:00
Dan Gohman
f033b5a393 Update a comment.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60484 91177308-0d34-0410-b5e6-96231b3b80d8
2008-12-03 17:10:41 +00:00
Dan Gohman
8be6bbe5bf Eliminate the ISel priority queue, which used the topological order for a
priority function. Instead, just iterate over the AllNodes list, which is
already in topological order. This eliminates a fair amount of bookkeeping,
and speeds up the isel phase by about 15% on many testcases.

The impact on most targets is that AddToISelQueue calls can be simply removed.

In the x86 target, there are two additional notable changes.

The rule-bending AND+SHIFT optimization in MatchAddress that creates new
pre-isel nodes during isel is now a little more verbose, but more robust.
Instead of either creating an invalid DAG or creating an invalid topological
sort, as it has historically done, it can now just insert the new nodes into
the node list at a position where they will be consistent with the topological
ordering.

Also, the address-matching code has logic that checked to see if a node was
"already selected". However, when a node is selected, it has all its uses
taken away via ReplaceAllUsesWith or equivalent, so it won't recieve any
further visits from MatchAddress. This code is now removed.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58748 91177308-0d34-0410-b5e6-96231b3b80d8
2008-11-05 04:14:16 +00:00
David Greene
8ad4c00c00 Have TableGen emit setSubgraphColor calls under control of a -gen-debug
flag.  Then in a debugger developers can set breakpoints at these calls
to see waht is about to be selected and what the resulting subgraph
looks like.  This really helps when debugging instruction selection.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58278 91177308-0d34-0410-b5e6-96231b3b80d8
2008-10-27 21:56:29 +00:00
Dan Gohman
da8ac5fd91 Avoid creating two TargetLowering objects for each target.
Instead, just create one, and make sure everything that needs
it can access it. Previously most of the SelectionDAGISel
subclasses all had their own TargetLowering object, which was
redundant with the TargetLowering object in the TargetMachine
subclasses, except on Sparc, where SparcTargetMachine
didn't have a TargetLowering object. Change Sparc to work
more like the other targets here.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57016 91177308-0d34-0410-b5e6-96231b3b80d8
2008-10-03 16:55:19 +00:00
Evan Cheng
3f7eb8eba0 Cosmetic.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56299 91177308-0d34-0410-b5e6-96231b3b80d8
2008-09-18 07:24:33 +00:00
Dan Gohman
f5aeb1a8e4 Rename ConstantSDNode::getValue to getZExtValue, for consistency
with ConstantInt. This led to fixing a bug in TargetLowering.cpp
using getValue instead of getAPIntValue.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56159 91177308-0d34-0410-b5e6-96231b3b80d8
2008-09-12 16:56:44 +00:00
Gabor Greif
ba36cb5242 erect abstraction boundaries for accessing SDValue members, rename Val -> Node to reflect semantics
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55504 91177308-0d34-0410-b5e6-96231b3b80d8
2008-08-28 21:40:38 +00:00
Gabor Greif
99a6cb92d1 disallow direct access to SDValue::ResNo, provide a getter instead
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55394 91177308-0d34-0410-b5e6-96231b3b80d8
2008-08-26 22:36:50 +00:00
Dan Gohman
f350b277f3 Move the point at which FastISel taps into the SelectionDAGISel
process up to a higher level. This allows FastISel to leverage
more of SelectionDAGISel's infastructure, such as updating Machine
PHI nodes.

Also, implement transitioning from SDISel back to FastISel in
the middle of a block, so it's now possible to go back and
forth. This allows FastISel to hand individual CallInsts and other
complicated things off to SDISel to handle, while handling the rest
of the block itself.

To help support this, reorganize the SelectionDAG class so that it
is allocated once and reused throughout a function, instead of
being completely reallocated for each block.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55219 91177308-0d34-0410-b5e6-96231b3b80d8
2008-08-23 02:25:05 +00:00
Dan Gohman
ad3460c3c9 Simplify SelectRoot's interface, and factor out some common code
from all targets.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55124 91177308-0d34-0410-b5e6-96231b3b80d8
2008-08-21 16:36:34 +00:00
Dan Gohman
475871a144 Rename SDOperand to SDValue.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54128 91177308-0d34-0410-b5e6-96231b3b80d8
2008-07-27 21:46:04 +00:00
Dan Gohman
e8be6c6391 Add a new function, ReplaceAllUsesOfValuesWith, which handles bulk
replacement of multiple values. This is slightly more efficient
than doing multiple ReplaceAllUsesOfValueWith calls, and theoretically
could be optimized even further. However, an important property of this
new function is that it handles the case where the source value set and
destination value set overlap. This makes it feasible for isel to use
SelectNodeTo in many very common cases, which is advantageous because
SelectNodeTo avoids a temporary node and it doesn't require CSEMap
updates for users of values that don't change position.

Revamp MorphNodeTo, which is what does all the work of SelectNodeTo, to
handle operand lists more efficiently, and to correctly handle a number
of corner cases to which its new wider use exposes it.

This commit also includes a change to the encoding of post-isel opcodes
in SDNodes; now instead of being sandwiched between the target-independent
pre-isel opcodes and the target-dependent pre-isel opcodes, post-isel
opcodes are now represented as negative values. This makes it possible
to test if an opcode is pre-isel or post-isel without having to know
the size of the current target's post-isel instruction set.

These changes speed up llc overall by 3% and reduce memory usage by 10%
on the InstructionCombining.cpp testcase with -fast and -regalloc=local.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53728 91177308-0d34-0410-b5e6-96231b3b80d8
2008-07-17 19:10:17 +00:00
Dan Gohman
1002c02034 Add explicit keywords.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53179 91177308-0d34-0410-b5e6-96231b3b80d8
2008-07-07 18:00:37 +00:00
Evan Cheng
db8d56b825 Split scheduling from instruction selection.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52923 91177308-0d34-0410-b5e6-96231b3b80d8
2008-06-30 20:45:06 +00:00
Duncan Sands
83ec4b6711 Wrap MVT::ValueType in a struct to get type safety
and better control the abstraction.  Rename the type
to MVT.  To update out-of-tree patches, the main
thing to do is to rename MVT::ValueType to MVT, and
rewrite expressions like MVT::getSizeInBits(VT) in
the form VT.getSizeInBits().  Use VT.getSimpleVT()
to extract a MVT::SimpleValueType for use in switch
statements (you will get an assert failure if VT is
an extended value type - these shouldn't exist after
type legalization).
This results in a small speedup of codegen and no
new testsuite failures (x86-64 linux).


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52044 91177308-0d34-0410-b5e6-96231b3b80d8
2008-06-06 12:08:01 +00:00
Evan Cheng
4e3f5a4e9c Dwarf requires variable entries to be in the source order. Right now, since we are recording variable information at isel time this means parameters would appear in the reverse order. The short term fix is to issue recordVariable() at asm printing time instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46724 91177308-0d34-0410-b5e6-96231b3b80d8
2008-02-04 23:06:48 +00:00
Chris Lattner
3d62d780ab explicitly include Compiler.h instead of getting it from tblgen in the middle of a class.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46676 91177308-0d34-0410-b5e6-96231b3b80d8
2008-02-03 05:43:57 +00:00
Chris Lattner
a47b9bcbde don't do ReplaceUses on a result that doesn't exist.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46673 91177308-0d34-0410-b5e6-96231b3b80d8
2008-02-03 03:20:59 +00:00
Evan Cheng
a844bdeab3 SDIsel processes llvm.dbg.declare by recording the variable debug information descriptor and its corresponding stack frame index in MachineModuleInfo. This only works if the local variable is "homed" in the stack frame. It does not work for byval parameter, etc.
Added ISD::DECLARE node type to represent llvm.dbg.declare intrinsic. Now the intrinsic calls are lowered into a SDNode and lives on through out the codegen passes.
For now, since all the debugging information recording is done at isel time, when a ISD::DECLARE node is selected, it has the side effect of also recording the variable. This is a short term solution that should be fixed in time.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46659 91177308-0d34-0410-b5e6-96231b3b80d8
2008-02-02 04:07:54 +00:00
Dan Gohman
b625f2f896 Factor the addressing mode and the load/store VT out of LoadSDNode
and StoreSDNode into their common base class LSBaseSDNode. Member
functions getLoadedVT and getStoredVT are replaced with the common
getMemoryVT to simplify code that will handle both loads and stores.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46538 91177308-0d34-0410-b5e6-96231b3b80d8
2008-01-30 00:15:11 +00:00
Chris Lattner
84bc5427d6 Rename SSARegMap -> MachineRegisterInfo in keeping with the idea
that "machine" classes are used to represent the current state of
the code being compiled.  Given this expanded name, we can start 
moving other stuff into it.  For now, move the UsedPhysRegs and
LiveIn/LoveOuts vectors from MachineFunction into it.

Update all the clients to match.

This also reduces some needless #includes, such as MachineModuleInfo
from MachineFunction.



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45467 91177308-0d34-0410-b5e6-96231b3b80d8
2007-12-31 04:13:23 +00:00
Chris Lattner
4ee451de36 Remove attribution from file headers, per discussion on llvmdev.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45418 91177308-0d34-0410-b5e6-96231b3b80d8
2007-12-29 20:36:04 +00:00
Dan Gohman
525178cdbf Migrate X86 and ARM from using X86ISD::{,I}DIV and ARMISD::MULHILO{U,S} to
use ISD::{S,U}DIVREM and ISD::{S,U}MUL_HIO. Move the lowering code
associated with these operators into target-independent in LegalizeDAG.cpp
and TargetLowering.cpp.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@42762 91177308-0d34-0410-b5e6-96231b3b80d8
2007-10-08 18:33:35 +00:00
Evan Cheng
13ab020ea0 Remove clobbersPred. Add an OptionalDefOperand to instructions which have the 's' bit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@38501 91177308-0d34-0410-b5e6-96231b3b80d8
2007-07-10 18:08:01 +00:00
Evan Cheng
ee568cf794 Unfortunately we now require C++ code to isel Bcc, conditional moves, etc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@37896 91177308-0d34-0410-b5e6-96231b3b80d8
2007-07-05 07:15:27 +00:00
Evan Cheng
44bec52b1b Add PredicateOperand to all ARM instructions that have the condition field.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@37066 91177308-0d34-0410-b5e6-96231b3b80d8
2007-05-15 01:29:07 +00:00