This pass was assuming that if hasAddressTaken() returns false for a
function, the function's only uses are call sites. That's not true
because there can be references by BlockAddresses too.
Fix the pass to handle this case. Fix
BlockAddress::replaceUsesOfWithOnConstant() to allow a function's type
to be changed by RAUW'ing the function with a bitcast of the recreated
function.
Patch by Mark Seaborn.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183933 91177308-0d34-0410-b5e6-96231b3b80d8
I've been comparing the object file output of LLVM's integrated
assembler against the external assembler on PowerPC, and one
area where differences still remain are in DWARF sections.
In particular, the GNU assembler generates .debug_frame and
.debug_line sections using a code alignment factor of 4, since
all PowerPC instructions have size 4 and must be aligned to a
multiple of 4. However, current MC code hard-codes a code
alignment factor of 1.
This patch changes this by adding a "minimum instruction alignment"
data element to MCAsmInfo and using this as code alignment factor.
This requires passing a MCContext into MCDwarfLineAddr::Encode
and MCDwarfLineAddr::EncodeAdvanceLoc. Note that one caller,
MCDwarfLineAddr::Write, didn't actually have that information
available. However, it turns out that this routine is in fact
never used in the whole code base, so the patch simply removes
it. If it turns out to be needed again at a later time, it
could be re-added with an updated interface.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183834 91177308-0d34-0410-b5e6-96231b3b80d8
A couple of old test cases in test/MC/PowerPC were still using
LLVM IR. Now that we have a working assembler, we can move
them to assembler tests instead:
ppc64-initial-cfa.ll
ppc64-relocs-01.ll
ppc64-tls-relocs-01.ll
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183829 91177308-0d34-0410-b5e6-96231b3b80d8
This test case was a "sanity check"/"breathing" test case at first, but
is really fragile, which impairs changes to yaml2obj.
`test/Object/yaml2obj-elf-bits-endian.test` is much more robust and
serves as an adequate sanity check.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183811 91177308-0d34-0410-b5e6-96231b3b80d8
The pass emits a call to sqrt that has attribute "read-none". This call will be
converted to an ISD::FSQRT node during DAG construction, which will turn into
a mips native sqrt instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183802 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of a custom implementation of replaceAllUsesWith, we just call
replaceAllUsesWith and recreate llvm.used and llvm.compiler-used.
This change is particularity interesting because it makes llvm see
through what clang is doing with static used functions in extern "C"
contexts. With this change, running clang -O2 in
extern "C" {
__attribute__((used)) static void foo() {}
}
produces
@llvm.used = appending global [1 x i8*] [i8* bitcast (void ()* @foo to
i8*)], section "llvm.metadata"
define internal void @foo() #0 {
entry:
ret void
}
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183756 91177308-0d34-0410-b5e6-96231b3b80d8
Negative zero is returned by the primary expression parser as INT32_MIN, so all that the method needs to do is to accept this value.
Behavior already present for Thumb2.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183734 91177308-0d34-0410-b5e6-96231b3b80d8
- Don't use assert(0), or tests may pass or fail according to assertions.
- For now, The tests are marked as XFAIL for win32 hosts.
FIXME: Could we avoid XFAIL to specify triple in the RUN lines?
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183728 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, only emitting the ELF header is supported (no sections or
segments).
The ELFYAML code organization is broadly similar to the COFFYAML code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183711 91177308-0d34-0410-b5e6-96231b3b80d8
Some ARM CPUs only support ARM mode (ancient v4 ones, for example) and some
only support Thumb mode (M-class ones currently). This makes sure such CPUs
default to the correct mode and makes the AsmParser diagnose an attempt to
switch modes incorrectly.
rdar://14024354
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183710 91177308-0d34-0410-b5e6-96231b3b80d8
Previously LEA64_32r went through virtually the entire backend thinking it was
using 32-bit registers until its blissful illusions were cruelly snatched away
by MCInstLower and 64-bit equivalents were substituted at the last minute.
This patch makes it behave normally, and take 64-bit registers as sources all
the way through. Previous uses (for 32-bit arithmetic) are accommodated via
SUBREG_TO_REG instructions which make the types and classes agree properly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183693 91177308-0d34-0410-b5e6-96231b3b80d8
A plain "sc" without argument is supposed to be treated like "sc 0"
by the assembler. This patch adds a corresponding alias.
Problem reported by Joerg Sonnenberger.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183687 91177308-0d34-0410-b5e6-96231b3b80d8
The extended branch mnemonics are supposed to use an implied CR0
if there is no explicit condition register specified. This patch
adds extra variants of the mnemonics to this effect.
Problem reported by Joerg Sonnenberger.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183686 91177308-0d34-0410-b5e6-96231b3b80d8
the Mips16 port. A few of the psuedos could either take signed
or unsigned arguments and I did not distinguish the case and improperly
rejected some valid cases that the assembler had previously accepted
when they were pure pseudos that expanded as assembly instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183633 91177308-0d34-0410-b5e6-96231b3b80d8
Since we have ARM unwind directive parser and assembler, we
can check the correctness in two stages:
1. From LLVM assembly (.ll) to ARM assembly (.s)
2. From ARM assembly (.s) to ELF object file (.o)
We already have several "*.s to *.o" test cases. This CL adds
some "*.ll to *.s" test cases and removes the redundant "*.ll to *.o"
test cases.
New test cases to check "*.ll to *.s" code generator:
- ehabi.ll: Check the correctness of the generated unwind directives.
- section-name.ll: Check the section name of functions.
Removed test cases:
- ehabi-mc-cantunwind.ll
(Covered by ehabi-cantunwind.ll, and eh-directive-cantunwind.s)
- ehabi-mc-compact-pr0.ll
(Covered by ehabi.ll, eh-compact-pr0.s, eh-directive-save.s, and
eh-directive-setfp.s)
- ehabi-mc-compact-pr1.ll
(Covered by ehabi.ll, eh-compact-pr1.s, eh-directive-save.s, and
eh-directive-setfp.s)
- ehabi-mc.ll
(Covered by ehabi.ll, and eh-directive-integrated-test.s)
- ehabi-mc-section-group.ll
(Covered by section-name.ll, and eh-directive-section-comdat.s)
- ehabi-mc-section.ll
(Covered by section-name.ll, and eh-directive-section.s)
- ehabi-mc-sh_link.ll
(Covered by eh-directive-text-section.s, and eh-directive-section.s)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183628 91177308-0d34-0410-b5e6-96231b3b80d8
Changes to ARM unwind opcode assembler:
* Fix multiple .save or .vsave directives. Besides, the
order is preserved now.
* For the directives which will generate multiple opcodes,
such as ".save {r0-r11}", the order of the unwind opcode
is fixed now, i.e. the registers with less encoding value
are popped first.
* Fix the $sp offset calculation. Now, we can use the
.setfp, .pad, .save, and .vsave directives at any order.
Changes to test cases:
* Add test cases to check the order of multiple opcodes
for the .save directive.
* Fix the incorrect $sp offset in the test case. The
stack pointer offset specified in the test case was
incorrect. (Changed test cases: ehabi-mc-section.ll and
ehabi-mc.ll)
* The opcode to restore $sp are slightly reordered. The
behavior are not changed, and the new output is same
as the output of GNU as. (Changed test cases:
eh-directive-pad.s and eh-directive-setfp.s)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183627 91177308-0d34-0410-b5e6-96231b3b80d8
Variadic functions are particularly fragile in the face of ABI changes, so this
limits how much the pass changes them
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183625 91177308-0d34-0410-b5e6-96231b3b80d8
Handle the case when the disassembler table can't tell
the difference between some encodings of QADD and CPS.
Add some necessary safe guards in CPS decoding as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183610 91177308-0d34-0410-b5e6-96231b3b80d8
r183584 tries to derive some info from the code *AFTER* a call and apply
these derived info to the code *BEFORE* the call, which is not always safe
as the call in question may never return, and in this case, the derived
info is invalid.
Thank Duncan for pointing out this potential bug.
rdar://14073661
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183606 91177308-0d34-0410-b5e6-96231b3b80d8
instantiation issue with non-standard type.
Add a backend option to warn on a given stack size limit.
Option: -mllvm -warn-stack-size=<limit>
Output (if limit is exceeded):
warning: Stack size limit exceeded (<actual size>) in <functionName>.
The longer term plan is to hook that to a clang warning.
PR:4072
<rdar://problem/13987214>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183595 91177308-0d34-0410-b5e6-96231b3b80d8
The MemCpyOpt pass is capable of optimizing:
callee(&S); copy N bytes from S to D.
into:
callee(&D);
subject to some legality constraints.
Assertion is triggered when the compiler tries to evalute "sizeof(typeof(D))",
while D is an opaque-typed, 'sret' formal argument of function being compiled.
i.e. the signature of the func being compiled is something like this:
T caller(...,%opaque* noalias nocapture sret %D, ...)
The fix is that when come across such situation, instead of calling some
utility functions to get the size of D's type (which will crash), we simply
assume D has at least N bytes as implified by the copy-instruction.
rdar://14073661
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183584 91177308-0d34-0410-b5e6-96231b3b80d8
On PPC32, [su]div,rem on i64 types are transformed into runtime library
function calls. As a result, they are not allowed in counter-based loops (the
counter-loops verification pass caught this error; this change fixes PR16169).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183581 91177308-0d34-0410-b5e6-96231b3b80d8
We weren't computing structure size correctly and we were relying on
the original alloca instruction to compute the offset, which isn't
always reliable.
Reviewed-by: Vincent Lejeune <vljn@ovi.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183568 91177308-0d34-0410-b5e6-96231b3b80d8
Option: -mllvm -warn-stack-size=<limit>
Output (if limit is exceeded):
warning: Stack size limit exceeded (<actual size>) in <functionName>.
The longer term plan is to hook that to a clang warning.
PR:4072
<rdar://problem/13987214>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183552 91177308-0d34-0410-b5e6-96231b3b80d8
My recent ARM FastISel patch exposed this bug:
http://llvm.org/bugs/show_bug.cgi?id=16178
The root cause is that it can't select integer sext/zext pre-ARMv6 and
asserts out.
The current integer sext/zext code doesn't handle other cases gracefully
either, so this patch makes it handle all sext and zext from i1/i8/i16
to i8/i16/i32, with and without ARMv6, both in Thumb and ARM mode. This
should fix the bug as well as make FastISel faster because it bails to
SelectionDAG less often. See fastisel-ext.patch for this.
fastisel-ext-tests.patch changes current tests to always use reg-imm AND
for 8-bit zext instead of UXTB. This simplifies code since it is
supported on ARMv4t and later, and at least on A15 both should perform
exactly the same (both have exec 1 uop 1, type I).
2013-05-31-char-shift-crash.ll is a bitcode version of the above bug
16178 repro.
fast-isel-ext.ll tests all sext/zext combinations that ARM FastISel
should now handle.
Note that my ARM FastISel enabling patch was reverted due to a separate
failure when dealing with MCJIT, I'll fix this second failure and then
turn FastISel on again for non-iOS ARM targets.
I've tested "make check-all" on my x86 box, and "lnt test-suite" on A15
hardware.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183551 91177308-0d34-0410-b5e6-96231b3b80d8
Fix an assertion when the compiler encounters big constants whose bit width is
not a multiple of 64-bits.
Although clang would never generate something like this, the backend should be
able to handle any legal IR.
<rdar://problem/13363576>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183544 91177308-0d34-0410-b5e6-96231b3b80d8
OpenBSD's stack smashing protection differs slightly from other
platforms:
1. The smash handler function is "__stack_smash_handler(const char
*funcname)" instead of "__stack_chk_fail(void)".
2. There's a hidden "long __guard_local" object that gets linked
into each executable and DSO.
Patch by Matthew Dempsky.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183533 91177308-0d34-0410-b5e6-96231b3b80d8
from the LC_DATA_IN_CODE load command. And when disassembling print
the data in code formatted for the kind of data it and not disassemble those
bytes.
I added the format specific functionality to the derived class MachOObjectFile
since these tables only appears in Mach-O object files. This is my first
attempt to modify the libObject stuff so if folks have better suggestions
how to fit this in or suggestions on the implementation please let me know.
rdar://11791371
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183424 91177308-0d34-0410-b5e6-96231b3b80d8
Previously commited @183279 but tests were failing, reverted @183286
It was broken because @183336 was missing, now it's there.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183343 91177308-0d34-0410-b5e6-96231b3b80d8
The first symbol on ELF is dummy, but it has a defined content and readelf
normally displays it. With this change llvm-readobj also displays it and we
can check that llvm-mc output is correct according to the standard.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183337 91177308-0d34-0410-b5e6-96231b3b80d8
When a function is inlined we lazily construct the variables
representing the function's parameters. After that, we add any remaining
unused parameters.
If the function doesn't use all the parameters, or uses them out of
order, then the DWARF would produce them in that order, producing a
parameter order that doesn't match the source.
This fix causes us to always keep the arg variables at the start of the
variable list & in the original order from the source.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183297 91177308-0d34-0410-b5e6-96231b3b80d8
In ELF (as in MachO), not all relocations point to symbols. Represent this
properly by using a symbol_iterator instead of a SymbolRef. Update llvm-readobj
ELF's dumper to handle relocatios without symbols.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183284 91177308-0d34-0410-b5e6-96231b3b80d8
IndVarSimplify is willing to move divide instructions outside of their
loop bodies if they are invariant of the loop. However, it may not be
safe to expand them if we do not know if they can trap.
Instead, check to see if it is not safe to expand the instruction and
skip the expansion.
This fixes PR16041.
Testcase by Rafael Ávila de Espíndola.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183239 91177308-0d34-0410-b5e6-96231b3b80d8
The ARM backend did not expect LDRBi12 to hold a constant pool operand.
Allow for LLVM to deal with the instruction similar to how it deals with
LDRi12.
This fixes PR16215.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183238 91177308-0d34-0410-b5e6-96231b3b80d8
The problem this time seems to be a thinko. We were assuming that in the CFG
A
| \
| B
| /
C
speculating the basic block B would cause only the phi value for the B->C edge
to be speculated. That is not true, the phi's are semantically in the edges, so
if the A->B->C path is taken, any code needed for A->C is not executed and we
have to consider it too when deciding to speculate B.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183226 91177308-0d34-0410-b5e6-96231b3b80d8
PR16069 is an interesting case where an incoming value to a PHI is a
trap value while also being a 'ConstantExpr'.
We do not consider this case when performing the 'HoistThenElseCodeToIf'
optimization.
Instead, make our modifications more conservative if we detect that we
cannot transform the PHI to a select.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183152 91177308-0d34-0410-b5e6-96231b3b80d8
index greater than the size of the vector is invalid. The shuffle may be
shrinking the size of the vector. Fixes a crash!
Also drop the maximum recursion depth of the safety check for this
optimization to five.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183080 91177308-0d34-0410-b5e6-96231b3b80d8
The MOV64ri64i32 instruction required hacky MCInst lowering because it
was allocated as setting a GR64, but the eventual instruction ("movl")
only set a GR32. This converts it into a so-called "MOV32ri64" which
still accepts a (appropriate) 64-bit immediate but defines a GR32.
This is then converted to the full GR64 by a SUBREG_TO_REG operation,
thus keeping everyone happy.
This fixes a typo in the opcode field of the original patch, which
should make the legact JIT work again (& adds test for that problem).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183068 91177308-0d34-0410-b5e6-96231b3b80d8
Fixes rdar:14036816, PR16130.
There is an opportunity to compute precise trip counts for 'or'
expressions and multi-exit loops.
rdar:14038809: Optimize trip count computation for multi-exit loops.
To do this we need to record the fact that ExitLimit assumes NSW. When
it does not we can safely assume that the loop trip count is the
minimum ExitLimt across all subexpressions and loop exits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183060 91177308-0d34-0410-b5e6-96231b3b80d8
We check that instructions in the loop don't have outside users (except if
they are reduction values). Unfortunately, we skipped this check for
if-convertable PHIs.
Fixes PR16184.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183035 91177308-0d34-0410-b5e6-96231b3b80d8
Namely, check if the target allows to fold more that one register in the
addressing mode and if yes, adjust the cost accordingly.
Prior to this commit, reg1 + scale * reg2 accesses were artificially preferred
to reg1 + reg2 accesses. Indeed, the cost model wrongly assumed that reg1 + reg2
needs a temporary register for the computation, whereas it was correctly
estimated for reg1 + scale * reg2.
<rdar://problem/13973908>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183021 91177308-0d34-0410-b5e6-96231b3b80d8
These instructions are deprecated oddities, but we still need to be able to
disassemble (and reassemble) them if and when they're encountered.
Patch by Amaury de la Vieuville.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183011 91177308-0d34-0410-b5e6-96231b3b80d8
The disassembly of VEXT instructions was too lax in the bits checked. This
fixes the case where the instruction affects Q-registers but a misaligned lane
was specified (should be UNDEFINED).
Patch by Amaury de la Vieuville
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183003 91177308-0d34-0410-b5e6-96231b3b80d8
Unlike most -- hopefully "all other", but I'm still checking -- memory
instructions we support, LOAD REVERSED and STORE REVERSED may access
the memory location several times. This means that they are not suitable
for volatile loads and stores.
This patch is a prerequisite for better atomic load and store support.
The same principle applies there: almost all memory instructions we
support are inherently atomic ("block concurrent"), but LOAD REVERSED
and STORE REVERSED are exceptions.
Other instructions continue to allow volatile operands. I will add
positive "allows volatile" tests at the same time as the "allows atomic
load or store" tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183002 91177308-0d34-0410-b5e6-96231b3b80d8
Now that 3.3 is branched, we are re-enabling virtual registers to help
iron out bugs before the next release. Some of the post-RA passes do
not play well with virtual registers, so we disable them for now. The
needed functionality of the PrologEpilogInserter pass is copied to a
new backend-specific NVPTXPrologEpilog pass.
The test for this commit is not breaking the existing tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182998 91177308-0d34-0410-b5e6-96231b3b80d8
Before this change, each module defined a weak_odr global __msan_track_origins
with a value of 1 if origin tracking is enabled, 0 if disabled. If there are
modules with different values, any of them may win. If 0 wins, and there is at
least one module with 1, the program will most likely crash.
With this change, __msan_track_origins is only emitted if origin tracking is
on. Then runtime library detects if there is at least one module with origin
tracking, and enables runtime support for it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182997 91177308-0d34-0410-b5e6-96231b3b80d8
The MOV64ri64i32 instruction required hacky MCInst lowering because it was
allocated as setting a GR64, but the eventual instruction ("movl") only set a
GR32. This converts it into a so-called "MOV32ri64" which still accepts a
(appropriate) 64-bit immediate but defines a GR32. This is then converted to
the full GR64 by a SUBREG_TO_REG operation, thus keeping everyone happy.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182991 91177308-0d34-0410-b5e6-96231b3b80d8
r182877 broke MCJIT tests on ARM and r182937 was working around another failure
by r182877.
This should make the ARM bots green.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182960 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes the test on ARM. Looks like it was broken by r182877. Not
sure if this is a bug on fast isel on ARM, but this should help fix
the ARM bots.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182937 91177308-0d34-0410-b5e6-96231b3b80d8
The pattern the test originally checked for doesn't occur on other -mcpu
settings. On atom it's still there though slightly differently scheduled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182933 91177308-0d34-0410-b5e6-96231b3b80d8
This test was failing on some hosts when an unexpected register was used for a
variable. This just extends the regexp to allow the new x86-64 registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182929 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of having a bunch of separate MOV8r0, MOV16r0, ... pseudo-instructions,
it's better to use a single MOV32r0 (which will expand to "xorl %reg, %reg")
and obtain other sizes with EXTRACT_SUBREG and SUBREG_TO_REG. The encoding is
smaller and partial register updates can sometimes be avoided.
Until recently, this sequence was a barrier to rematerialization though. That
should now be fixed so it's an appropriate time to make the change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182928 91177308-0d34-0410-b5e6-96231b3b80d8
The code to distinguish between unaligned and aligned addresses was
already there, so this is mostly just a switch-on-and-test process.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182920 91177308-0d34-0410-b5e6-96231b3b80d8
For COFF and MachO, sections semantically have relocations that apply to them.
That is not the case on ELF.
In relocatable objects (.o), a section with relocations in ELF has offsets to
another section where the relocations should be applied.
In dynamic objects and executables, relocations don't have an offset, they have
a virtual address. The section sh_info may or may not point to another section,
but that is not actually used for resolving the relocations.
This patch exposes that in the ObjectFile API. It has the following advantages:
* Most (all?) clients can handle this more efficiently. They will normally walk
all relocations, so doing an effort to iterate in a particular order doesn't
save time.
* llvm-readobj now prints relocations in the same way the native readelf does.
* probably most important, relocations that don't point to any section are now
visible. This is the case of relocations in the rela.dyn section. See the
updated relocation-executable.test for example.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182908 91177308-0d34-0410-b5e6-96231b3b80d8
In fact, we're probably going to support these flags in completely different
ways. So this test is no longer valid.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182899 91177308-0d34-0410-b5e6-96231b3b80d8
Fixes PR16146: gdb.base__call-ar-st.exp fails after
pre-RA-sched=source fixes.
Patch by Xiaoyi Guo!
This also fixes an unsupported dbg.value test case. Codegen was
previously incorrect but the test was passing by luck.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182885 91177308-0d34-0410-b5e6-96231b3b80d8
FastISel was only enabled for iOS ARM and Thumb2, this patch enables it
for ARM (not Thumb2) on Linux and NaCl.
Thumb2 support needs a bit more work, mainly around register class
restrictions.
The patch punts to SelectionDAG when doing TLS relocation on non-Darwin
targets. I will fix this and other FastISel-to-SelectionDAG failures in
a separate patch.
The patch also forces FastISel to retain frame pointers: iOS always
keeps them for backtracking (so emitted code won't change because of
this), but Linux was getting much worse code that was incorrect when
using big frames (such as test-suite's lencod). I'll also fix this in a
later patch, it will probably require a peephole so that FastISel
doesn't rematerialize frame pointers back-to-back.
The test changes are straightforward, similar to:
http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20130513/174279.html
They also add a vararg test that got dropped in that change.
I ran all of test-suite on A15 hardware with --optimize-option=-O0 and
all the tests pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182877 91177308-0d34-0410-b5e6-96231b3b80d8
This allows rematerialization during register coalescing to handle
more cases involving operations like SUBREG_TO_REG which might need to
be rematerialized using sub-register indices.
For example, code like:
v1(GPR64):sub_32 = MOVZ something
v2(GPR64) = COPY v1(GPR64)
should be convertable to:
v2(GPR64):sub_32 = MOVZ something
but previously we just gave up in places like this
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182872 91177308-0d34-0410-b5e6-96231b3b80d8
Since the testing case uses ref_addr, which requires version 3+ to work,
we will solve the dwarf version issue first.
This patch also causes failures in one of the bots. I will update the patch
accordingly in my next attempt.
rdar://13926659
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182867 91177308-0d34-0410-b5e6-96231b3b80d8
This patch solves the problem of numeric register values not being accepted:
../set_alias.s:1:11: error: expected valid expression after comma
.set r4,$4
^
The parsing of .set directive is changed and handling of symbols in code
as well to enable this feature.
The test example is added.
Patch by Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182807 91177308-0d34-0410-b5e6-96231b3b80d8
- llvm.loop.parallel metadata has been renamed to llvm.loop to be more generic
by making the root of additional loop metadata.
- Loop::isAnnotatedParallel now looks for llvm.loop and associated
llvm.mem.parallel_loop_access
- document llvm.loop and update llvm.mem.parallel_loop_access
- add support for llvm.vectorizer.width and llvm.vectorizer.unroll
- document llvm.vectorizer.* metadata
- add utility class LoopVectorizerHints for getting/setting loop metadata
- use llvm.vectorizer.width=1 to indicate already vectorized instead of
already_vectorized
- update existing tests that used llvm.loop.parallel and
llvm.vectorizer.already_vectorized
Reviewed by: Nadav Rotem
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182802 91177308-0d34-0410-b5e6-96231b3b80d8
Previously we would read-modify-write the target bits when processing
relocations for the MCJIT. This had the problem that when relocations
were processed multiple times for the same object file (as they can
be), the result is not idempotent and the values became corrupted.
The solution to this is to take any bits used in the destination from
the pristine object file as LLVM emitted it.
This should fix PR16013 and remote MCJIT on ARM ELF targets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182800 91177308-0d34-0410-b5e6-96231b3b80d8
from a different CU.
We used to print out an error message and fail to generate inlined_subroutine.
If we use ref_addr in the generated DWARF, the DWARF version should be 3 or
above.
rdar://13926659
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182791 91177308-0d34-0410-b5e6-96231b3b80d8
Extend LinkModules to pass a ValueMaterializer to RemapInstruction and friends to lazily create Functions for lazily linked globals. This is a big win when linking small modules with large (mostly unused) library modules.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182776 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds support for the CRJ and CGRJ instructions. Support for
the immediate forms will be a separate patch.
The architecture has a large number of comparison instructions. I think
it's generally better to concentrate on using the "best" comparison
instruction first and foremost, then only use something like CRJ if
CR really was the natual choice of comparison instruction. The patch
therefore opportunistically converts separate CR and BRC instructions
into a single CRJ while emitting instructions in ISelLowering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182764 91177308-0d34-0410-b5e6-96231b3b80d8
When -ffast-math is in effect (on Linux, at least), clang defines
__FINITE_MATH_ONLY__ > 0 when including <math.h>. This causes the
preprocessor to include <bits/math-finite.h>, which renames the sqrt functions.
For instance, "sqrt" is renamed as "__sqrt_finite".
This patch adds the 3 new names in such a way that they will be treated
as equivalent to their respective original names.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182739 91177308-0d34-0410-b5e6-96231b3b80d8
When expanding unaligned Altivec loads, we use the decremented offset trick to
prevent page faults. Unfortunately, if we have a sequence of consecutive
unaligned loads, this leads to suboptimal code generation because the 'extra'
load from the first unaligned load can be combined with the base load from the
second (but only if the decremented offset trick is not used for the first).
Search up and down the chain, through loads and token factors, looking for
consecutive loads, and if one is found, don't use the offset reduction trick.
These duplicate loads are later combined to yield the desired sequence (in the
future, we might want a more-powerful chain search, but that will require some
changes to allow the combiner routines to access the AA object).
This should complete the initial implementation of the optimized unaligned
Altivec load expansion. There is some refactoring that should be done, but
that will happen when the unaligned store expansion is added.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182719 91177308-0d34-0410-b5e6-96231b3b80d8
The lvsl permutation control instruction is a function only of the alignment of
the pointer operand (relative to the 16-byte natural alignment of Altivec
vectors). As a result, multiple lvsl intrinsics where the operands differ by a
multiple of 16 can be combined.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182708 91177308-0d34-0410-b5e6-96231b3b80d8
Altivec only directly supports aligned loads, but the loads have a strange
property: If given an unaligned address, they truncate the address to the next
lower aligned address, and load from there. This property, along with an extra
load and some special-purpose permutation-control instructions that generate
the appropriate permutations from the original unaligned address, allow
efficient lowering of aligned loads. This code uses the trick explained in the
Apple Velocity Engine optimization overview document to prevent the needed
extra load from possibly causing a page fault if the original address happens
to be aligned.
As noted in the FIXMEs, there are several additional optimizations that can be
performed to reduce the cost of these loads even more. These will be
implemented in future commits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182691 91177308-0d34-0410-b5e6-96231b3b80d8