(i.e., there are no local variables and stuff), we still need to output FDE
information for the pushed registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@80960 91177308-0d34-0410-b5e6-96231b3b80d8
what was there before. In "no FP mode", we weren't generating labels and unwind
table entries after each "push" instruction. While more than likely "okay", it's
not technically correct. The major thing was that the ordering of when to define
a new CFA register and at what offset wasn't correct. This would cause the
exception handling to fail in ways most miserable to users.
I also cleaned up some code a bit. There's one function which has a "return" at
the beginning, so it's never used. Should I just remove it? :-)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@79139 91177308-0d34-0410-b5e6-96231b3b80d8
pushes in the function prolog if the function doesn't have any stack space,
i.e. for a prolog like:
0x40011870: push %r15
0x40011872: push %r14
0x40011874: push %rbx
Patch by Zoltan!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77919 91177308-0d34-0410-b5e6-96231b3b80d8
due to x86 encoding restrictions. This is currently off by default
because it may cause code quality regressions. This is for PR4572.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77565 91177308-0d34-0410-b5e6-96231b3b80d8
testsuite, due to exception handling not working
correctly. Maybe because the libgcc unwinder is
miscompiled - not sure, and I won't have time to
look into it before leaving on holiday. Note that
miscompilations of libgcc are not picked up by the
nightly testers, because they dynamically link with
libgcc, so pick up the system version rather than
the version built as part of llvm-gcc. This is a
nasty flaw in the nightly testers. (On the other
hand the Ada testsuite links with the just built
libgcc).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@76895 91177308-0d34-0410-b5e6-96231b3b80d8
This adds location info for all llvm_unreachable calls (which is a macro now) in
!NDEBUG builds.
In NDEBUG builds location info and the message is off (it only prints
"UREACHABLE executed").
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75640 91177308-0d34-0410-b5e6-96231b3b80d8
Make llvm_unreachable take an optional string, thus moving the cerr<< out of
line.
LLVM_UNREACHABLE is now a simple wrapper that makes the message go away for
NDEBUG builds.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75379 91177308-0d34-0410-b5e6-96231b3b80d8
is modified. Otherwise, the unwinder will get confused. The old code (before I
started my hacking) did this. It dropped on the floor, because I wasn't aware of
this requirement.
On the plus side, if we use "alloca" in a function, we create frame pointers
even with -fomit-frame-pointer is enabled!
This is a Good Thing(tm)!!!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75183 91177308-0d34-0410-b5e6-96231b3b80d8
registers based on dynamic conditions. For example, X86 EBP/RBP, when used as
frame register has to be spilled in the first fixed object. It should inform
PEI this so it doesn't get allocated another stack object. Also, it should not
be spilled as other callee-saved registers but rather its spilling and restoring
are being handled by emitPrologue and emitEpilogue. Avoid spilling it twice.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75116 91177308-0d34-0410-b5e6-96231b3b80d8
DWARF requires frame moves be specified at specific times. If you have a
prologue like this:
__Z3fooi:
Leh_func_begin1:
LBB1_0: ## entry
pushl %ebp
Llabel1:
movl %esp, %ebp
Llabel2:
pushl %esi
Llabel3:
subl $20, %esp
call "L1$pb"
"L1$pb":
popl %esi
The "pushl %ebp" needs a table entry specifying the offset. The "movl %esp,
%ebp" makes %ebp the new stack frame register, so that needs to be specified in
DWARF. And "pushl %esi" saves the callee-saved %esi register, which also needs
to be specified in DWARF.
Before, all of this logic was in one method. This didn't work too well, because
as you can see there are multiple FDE line entries that need to be created.
This fix creates the "MachineMove" objects directly when they're needed; instead
of waiting until the end, and losing information.
There is some ugliness where we generate code like this:
LBB22_0: ## entry
pushl %ebp
Llabel280:
movl %esp, %ebp
Llabel281:
Llabel284:
pushl %ebp <----------
pushl %ebx
pushl %edi
pushl %esi
Llabel282:
subl $328, %esp
Notice the extra "pushl %ebp". If we generate a "machine move" instruction in
the FDE for that pushl, the linker may get very confused about what value %ebp
should have when exitting the function. I.e., it'll give it the value %esp
instead of the %ebp value from the first "pushl". Not to mention that, in this
case, %ebp isn't modified in the function (that's a separate bug). I put a small
hack in to get it to work. It might be the only solution, but should be
revisited once the above case is fixed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75047 91177308-0d34-0410-b5e6-96231b3b80d8
U lib/Target/X86/X86RegisterInfo.cpp
U lib/Target/X86/X86RegisterInfo.h
Temporarily revert. This was causing an infinite loop in the linker on Leopard.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74970 91177308-0d34-0410-b5e6-96231b3b80d8
prologue like this:
__Z3fooi:
Leh_func_begin1:
LBB1_0: ## entry
pushl %ebp
Llabel1:
movl %esp, %ebp
Llabel2:
pushl %esi
Llabel3:
subl $20, %esp
call "L1$pb"
"L1$pb":
popl %esi
The "pushl %ebp" needs a table entry specifying the offset. The "movl %esp,
%ebp" makes %ebp the new stack frame register, so that needs to be specified in
DWARF. And "pushl %esi" saves the callee-saved %esi register, which also needs
to be specified in DWARF.
Before, all of this logic was in one method. This didn't work too well, because
as you can see there are multiple FDE line entries that need to be created.
This fix creates the "MachineMove" objects directly when they're needed; instead
of waiting until the end, and losing information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74952 91177308-0d34-0410-b5e6-96231b3b80d8
comes after the DW_CFA_def_cfa_register, because the CFA is really ESP from the
start of the function and only gets an offset when the "subl $xxx,%esp"
instruction happens, not the other way around.
And reapply r72898:
The DWARF unwind info was incorrect. While compiling with
`-fomit-frame-pointer', we would lack the DW_CFA_advance_loc information for a
lot of function, and then they would be `0'. The linker (at least on Darwin)
needs to encode the stack size. In some cases, the stack size is too large to
directly encode. So the linker checks to see if there is a "subl $xxx,%esp"
instruction at the point where the `DW_CFA_def_cfa_offset' says the pc was. If
so, the compact encoding records the offset in the function to where the stack
size is embedded. But because the `DW_CFA_advance_loc' instructions are missing,
it looks before the function and dies.
So, instead of emitting the EH debug label before the stack adjustment
operations, emit it afterwards, right before the frame move stuff.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73465 91177308-0d34-0410-b5e6-96231b3b80d8
`-fomit-frame-pointer', we would lack the DW_CFA_advance_loc information for a
lot of function, and then they would be `0'. The linker (at least on Darwin)
needs to encode the stack size. In some cases, the stack size is too large to
directly encode. So the linker checks to see if there is a "subl $xxx,%esp"
instruction at the point where the `DW_CFA_def_cfa_offset' says the pc was. If
so, the compact encoding records the offset in the function to where the stack
size is embedded. But because the `DW_CFA_advance_loc' instructions are missing,
it looks before the function and dies.
So, instead of emitting the EH debug label before the stack adjustment
operations, emit it afterwards, right before the frame move stuff.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72898 91177308-0d34-0410-b5e6-96231b3b80d8
Update code generator to use this attribute and remove DisableRedZone target option.
Update llc to set this attribute when -disable-red-zone command line option is used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72894 91177308-0d34-0410-b5e6-96231b3b80d8
booleans. This gives a better indication of what the "addReg()" is
doing. Remembering what all of those booleans mean isn't easy, especially if you
aren't spending all of your time in that code.
I took Jakob's suggestion and made it illegal to pass in "true" for the
flag. This should hopefully prevent any unintended misuse of this (by reverting
to the old way of using addReg()).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@71722 91177308-0d34-0410-b5e6-96231b3b80d8
builds.
--- Reverse-merging (from foreign repository) r68552 into '.':
U test/CodeGen/X86/tls8.ll
U test/CodeGen/X86/tls10.ll
U test/CodeGen/X86/tls2.ll
U test/CodeGen/X86/tls6.ll
U lib/Target/X86/X86Instr64bit.td
U lib/Target/X86/X86InstrSSE.td
U lib/Target/X86/X86InstrInfo.td
U lib/Target/X86/X86RegisterInfo.cpp
U lib/Target/X86/X86ISelLowering.cpp
U lib/Target/X86/X86CodeEmitter.cpp
U lib/Target/X86/X86FastISel.cpp
U lib/Target/X86/X86InstrInfo.h
U lib/Target/X86/X86ISelDAGToDAG.cpp
U lib/Target/X86/AsmPrinter/X86ATTAsmPrinter.cpp
U lib/Target/X86/AsmPrinter/X86IntelAsmPrinter.cpp
U lib/Target/X86/AsmPrinter/X86ATTAsmPrinter.h
U lib/Target/X86/AsmPrinter/X86IntelAsmPrinter.h
U lib/Target/X86/X86ISelLowering.h
U lib/Target/X86/X86InstrInfo.cpp
U lib/Target/X86/X86InstrBuilder.h
U lib/Target/X86/X86RegisterInfo.td
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@68560 91177308-0d34-0410-b5e6-96231b3b80d8
This introduces a small regression on the generated code
quality in the case we are just computing addresses, not
loading values.
Will work on it and on X86-64 support.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@68552 91177308-0d34-0410-b5e6-96231b3b80d8
Don't use the Red Zone when dynamic stack realignment is needed.
This could be implemented, but most x86-64 ABIs don't require
dynamic stack realignment so it isn't urgent.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63074 91177308-0d34-0410-b5e6-96231b3b80d8