Commit Graph

302 Commits

Author SHA1 Message Date
Bob Wilson
782b576749 Move a test that ended up in the wrong place.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124933 91177308-0d34-0410-b5e6-96231b3b80d8
2011-02-05 04:15:50 +00:00
Evan Cheng
53519f015e Last round of fixes for movw + movt global address codegen.
1. Fixed ARM pc adjustment.
2. Fixed dynamic-no-pic codegen
3. CSE of pc-relative load of global addresses.

It's now enabled by default for Darwin.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123991 91177308-0d34-0410-b5e6-96231b3b80d8
2011-01-21 18:55:51 +00:00
Andrew Trick
d1dace8aea Enable support for precise scheduling of the instruction selection
DAG. Disable using "-disable-sched-cycles".

For ARM, this enables a framework for modeling the cpu pipeline and
counting stalls. It also activates several heuristics to drive
scheduling based on the model. Scheduling is inherently imprecise at
this stage, and until spilling is improved it may defeat attempts to
schedule. However, this framework provides greater control over
tuning codegen.

Although the flag is not target-specific, it should have very little
affect on the default scheduler used by x86. The only two changes that
affect x86 are:
- scheduling a high-latency operation bumps the current cycle so independent
  operations can have their latency covered. i.e. two independent 4
  cycle operations can produce results in 4 cycles, not 8 cycles.
- Two operations with equal register pressure impact and no
  latency-based stalls on their uses will be prioritized by depth before height
  (height is irrelevant if no stalls occur in the schedule below this point).


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123971 91177308-0d34-0410-b5e6-96231b3b80d8
2011-01-21 06:19:05 +00:00
Bob Wilson
5e8b833707 Add ARM patterns to match EXTRACT_SUBVECTOR nodes.
Also fix an off-by-one in SelectionDAGBuilder that was preventing shuffle
vectors from being translated to EXTRACT_SUBVECTOR.
Patch by Tim Northover.

The test changes are needed to keep those spill-q tests from testing aligned
spills and restores.  If the only aligned stack objects are spill slots, we
no longer realign the stack frame.  Prior to this patch, an EXTRACT_SUBVECTOR
was legalized by loading from the stack, which created an aligned frame index.
Now, however, there is nothing except the spill slot in the stack frame, so
I added an aligned alloca.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122995 91177308-0d34-0410-b5e6-96231b3b80d8
2011-01-07 04:59:04 +00:00
Bob Wilson
4711d5cda3 Remove the rest of the *_sfp Neon instruction patterns.
Use the same COPY_TO_REGCLASS approach as for the 2-register *_sfp instructions.
This change made a big difference in the code generated for the
CodeGen/Thumb2/cross-rc-coalescing-2.ll test: The coalescer is still doing
a fine job, but some instructions that were previously moved outside the loop
are not moved now.  It's using fewer VFP registers now, which is generally
a good thing, so I think the estimates for register pressure changed and that
affected the LICM behavior.  Since that isn't obviously wrong, I've just
changed the test file.  This completes the work for Radar 8711675.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121730 91177308-0d34-0410-b5e6-96231b3b80d8
2010-12-13 23:02:37 +00:00
Evan Cheng
a9688c4b57 (or (and (shl A, #shamt), mask), B) => ARMbfi B, A, ~mask where lsb(mask) == #shamt. rdar://8752056
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121606 91177308-0d34-0410-b5e6-96231b3b80d8
2010-12-11 04:11:38 +00:00
Jim Grosbach
c6f9261711 ARM stm/ldm instructions require more than one register in the register list.
Otherwise, a plain str/ldr should be used instead. Make sure we account for
that in prologue/epilogue code generation.
rdar://8745460

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121391 91177308-0d34-0410-b5e6-96231b3b80d8
2010-12-09 18:31:13 +00:00
Bob Wilson
c24130bade The Thumb tADDrSPi instruction is not valid when the destination is SP.
Check for that and try narrowing it to tADDspi instead.  Radar 8724703.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120892 91177308-0d34-0410-b5e6-96231b3b80d8
2010-12-04 04:40:19 +00:00
Jim Grosbach
41ad0c4c73 When using the 'push' mnemonic for Thumb2 stmdb, be explicit when it's the
32-bit wide version by adding the .w suffix.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120838 91177308-0d34-0410-b5e6-96231b3b80d8
2010-12-03 20:33:01 +00:00
Owen Anderson
9d63d90de5 Add correct encodings for STRD and LDRD, including fixup support. Additionally, update these to unified syntax.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120589 91177308-0d34-0410-b5e6-96231b3b80d8
2010-12-01 19:18:46 +00:00
Evan Cheng
ab5c703fdb Fix epilogue codegen to avoid leaving the stack pointer in an invalid
state. Previously Thumb2 would restore sp from fp like this:
mov sp, r7
sub, sp, #4
If an interrupt is taken after the 'mov' but before the 'sub', callee-saved
registers might be clobbered by the interrupt handler. Instead, try
restoring directly from sp:
add sp, #4
Or, if necessary (with VLA, etc.) use a scratch register to compute sp and
then restore it:
sub.w r4, r7, #8
mov sp, r7
rdar://8465407


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119977 91177308-0d34-0410-b5e6-96231b3b80d8
2010-11-22 18:12:04 +00:00
Eric Christopher
8b3ca6216d Rewrite stack callee saved spills and restores to use push/pop instructions.
Remove movePastCSLoadStoreOps and associated code for simple pointer
increments. Update routines that depended upon other opcodes for save/restore.

Adjust all testcases accordingly.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119725 91177308-0d34-0410-b5e6-96231b3b80d8
2010-11-18 19:40:05 +00:00
Dale Johannesen
8abe08d7f9 These tests are looking for library function names that
appear to differ on Linux.  Try to make them pass on Linux.
Would be good for a Linux person to review this.



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119572 91177308-0d34-0410-b5e6-96231b3b80d8
2010-11-17 21:57:32 +00:00
Evan Cheng
c4af4638df Remove ARM isel hacks that fold large immediates into a pair of add, sub, and,
and xor. The 32-bit move immediates can be hoisted out of loops by machine
LICM but the isel hacks were preventing them.

Instead, let peephole optimization pass recognize registers that are defined by
immediates and the ARM target hook will fold the immediates in.

Other changes include 1) do not fold and / xor into cmp to isel TST / TEQ
instructions if there are multiple uses. This happens when the 'and' is live
out, machine sink would have sinked the computation and that ends up pessimizing
code. The peephole pass would recognize situations where the 'and' can be
toggled to define CPSR and eliminate the comparison anyway.

2) Move peephole pass to after machine LICM, sink, and CSE to avoid blocking
important optimizations.

rdar://8663787, rdar://8241368


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119548 91177308-0d34-0410-b5e6-96231b3b80d8
2010-11-17 20:13:28 +00:00
Evan Cheng
8239daf7c8 Two sets of changes. Sorry they are intermingled.
1. Fix pre-ra scheduler so it doesn't try to push instructions above calls to
   "optimize for latency". Call instructions don't have the right latency and
   this is more likely to use introduce spills.
2. Fix if-converter cost function. For ARM, it should use instruction latencies,
   not # of micro-ops since multi-latency instructions is completely executed
   even when the predicate is false. Also, some instruction will be "slower"
   when they are predicated due to the register def becoming implicit input.
   rdar://8598427


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@118135 91177308-0d34-0410-b5e6-96231b3b80d8
2010-11-03 00:45:17 +00:00
Jim Grosbach
ab3d00e535 Revert r114340 (improvements in Darwin function prologue/epilogue), as it broke
assumptions about stack layout. Specifically, LR must be saved next to FP.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@118026 91177308-0d34-0410-b5e6-96231b3b80d8
2010-11-02 17:35:25 +00:00
Bob Wilson
f74a429816 Overhaul memory barriers in the ARM backend. Radar 8601999.
There were a number of issues to fix up here:
* The "device" argument of the llvm.memory.barrier intrinsic should be
used to distinguish the "Full System" domain from the "Inner Shareable"
domain.  It has nothing to do with using DMB vs. DSB instructions.
* The compiler should never need to emit DSB instructions.  Remove the
ARMISD::SYNCBARRIER node and also remove the instruction patterns for DSB.
* Merge the separate DMB/DSB instructions for options only used for the
disassembler with the default DMB/DSB instructions.  Add the default
"full system" option ARM_MB::SY to the ARM_MB::MemBOpt enum.
* Add a separate ARMISD::MEMBARRIER_MCR node for subtargets that implement
a data memory barrier using the MCR instruction.
* Fix up encodings for these instructions (except MCR).
I also updated the tests and added a few new ones to check for DMB options
that were not currently being exercised.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@117756 91177308-0d34-0410-b5e6-96231b3b80d8
2010-10-30 00:54:37 +00:00
Evan Cheng
089751535d Avoiding overly aggressive latency scheduling. If the two nodes share an
operand and one of them has a single use that is a live out copy, favor the
one that is live out. Otherwise it will be difficult to eliminate the copy
if the instruction is a loop induction variable update. e.g.

BB:
sub r1, r3, #1
str r0, [r2, r3]
mov r3, r1
cmp
bne BB

=>

BB:
str r0, [r2, r3]
sub r3, r3, #1
cmp
bne BB

This fixed the recent 256.bzip2 regression.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@117675 91177308-0d34-0410-b5e6-96231b3b80d8
2010-10-29 18:09:28 +00:00
Evan Cheng
134982daa9 More accurate estimate / tracking of register pressure.
- Initial register pressure in the loop should be all the live defs into the
  loop. Not just those from loop preheader which is often empty.
- When an instruction is hoisted, update register pressure from loop preheader
  to the original BB.
- Treat only use of a virtual register as kill since the code is still SSA.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@116956 91177308-0d34-0410-b5e6-96231b3b80d8
2010-10-20 22:03:58 +00:00
Dale Johannesen
e4d31593c5 Fix crash introduced in 116852. 8573915.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@116955 91177308-0d34-0410-b5e6-96231b3b80d8
2010-10-20 22:03:37 +00:00
Dale Johannesen
575cd148ce Enable using vdup for vector constants which are splat of
integers by default, and remove the controlling flag, now
that LICM will hoist such vdup's.  8003375.



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@116852 91177308-0d34-0410-b5e6-96231b3b80d8
2010-10-19 20:00:17 +00:00
Evan Cheng
2312842de0 Re-enable register pressure aware machine licm with fixes. Hoist() may have
erased the instruction during LICM so UpdateRegPressureAfter() should not
reference it afterwards.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@116845 91177308-0d34-0410-b5e6-96231b3b80d8
2010-10-19 18:58:51 +00:00
Daniel Dunbar
9869413802 Revert r116781 "- Add a hook for target to determine whether an instruction def
is", which breaks some nightly tests.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@116816 91177308-0d34-0410-b5e6-96231b3b80d8
2010-10-19 17:14:24 +00:00
Evan Cheng
11e8b74a7a - Add a hook for target to determine whether an instruction def is
"long latency" enough to hoist even if it may increase spilling. Reloading
  a value from spill slot is often cheaper than performing an expensive
  computation in the loop. For X86, that means machine LICM will hoist
  SQRT, DIV, etc. ARM will be somewhat aggressive with VFP and NEON
  instructions.
- Enable register pressure aware machine LICM by default.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@116781 91177308-0d34-0410-b5e6-96231b3b80d8
2010-10-19 00:55:07 +00:00
Bob Wilson
7d24705f65 Change register allocation order for ARM VFP and NEON registers to put the
callee-saved registers at the end of the lists.  Also prefer to avoid using
the low registers that are in register subclasses required by certain
instructions, so that those registers will more likely be available when needed.
This change makes a huge improvement in spilling in some cases.  Thanks to
Jakob for helping me realize the problem.

Most of this patch is fixing the testsuite.  There are quite a few places
where we're checking for specific registers.  I changed those to wildcards
in places where that doesn't weaken the tests.  The spill-q.ll and
thumb2-spill-q.ll tests stopped spilling with this change, so I added a bunch
of live values to force spills on those tests.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@116055 91177308-0d34-0410-b5e6-96231b3b80d8
2010-10-08 06:15:13 +00:00
Owen Anderson
8614167572 Enable target-specific mul-lowering on ARM, even at -Os. Remove a test that this makes
irrelevant, but add a new test for the new, improved functionality.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@114494 91177308-0d34-0410-b5e6-96231b3b80d8
2010-09-21 22:51:46 +00:00
Jim Grosbach
1dc335a79f Simplify ARM callee-saved register handling by removing the distinction
between the high and low registers for prologue/epilogue code. This was
a Darwin-only thing that wasn't providing a realistic benefit anymore.
Combining the save areas simplifies the compiler code and results in better
ARM/Thumb2 codegen.

For example, previously we would generate code like:
        push    {r4, r5, r6, r7, lr}
        add     r7, sp, #12
        stmdb   sp!, {r8, r10, r11}
With this change, we combine the register saves and generate:
        push    {r4, r5, r6, r7, r8, r10, r11, lr}
        add     r7, sp, #12

rdar://8445635



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@114340 91177308-0d34-0410-b5e6-96231b3b80d8
2010-09-20 19:32:20 +00:00
Jim Grosbach
e6be85e9ff Teach the (non-MC) instruction printer to use the cannonical names for push/pop,
and shift instructions on ARM. Update the tests to match.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@114230 91177308-0d34-0410-b5e6-96231b3b80d8
2010-09-17 22:36:38 +00:00
Jim Grosbach
1aaf4cb393 Move thumb2 tests to the thumb2 directory
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@114206 91177308-0d34-0410-b5e6-96231b3b80d8
2010-09-17 20:34:09 +00:00
Evan Cheng
3ef1c8759a Teach if-converter to be more careful with predicating instructions that would
take multiple cycles to decode.
For the current if-converter clients (actually only ARM), the instructions that
are predicated on false are not nops. They would still take machine cycles to
decode. Micro-coded instructions such as LDM / STM can potentially take multiple
cycles to decode. If-converter should take treat them as non-micro-coded
simple instructions.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113570 91177308-0d34-0410-b5e6-96231b3b80d8
2010-09-10 01:29:16 +00:00
Bob Wilson
0f1e9457a5 Fix NEON VLD pseudo instruction itineraries that were incorrectly copied from
the VST pseudos.  The VLD/VST scheduling still needs work (see pr6722), but
at least we shouldn't confuse the loads with the stores.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113473 91177308-0d34-0410-b5e6-96231b3b80d8
2010-09-09 05:40:26 +00:00
Jim Grosbach
65482b1bb8 Re-apply r112883:
"For ARM stack frames that utilize variable sized objects and have either
large local stack areas or require dynamic stack realignment, allocate a
base register via which to access the local frame. This allows efficient
access to frame indices not accessible via the FP (either due to being out
of range or due to dynamic realignment) or the SP (due to variable sized
object allocation). In particular, this greatly improves efficiency of access
to spill slots in Thumb functions which contain VLAs."

r112986 fixed a latent bug exposed by the above.




git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112989 91177308-0d34-0410-b5e6-96231b3b80d8
2010-09-03 18:37:12 +00:00
Daniel Dunbar
6a8700301c Revert "For ARM stack frames that utilize variable sized objects and have either", it is breaking oggenc with Clang for ARMv6.
This reverts commit 8d6e29cfda270be483abf638850311670829ee65.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112962 91177308-0d34-0410-b5e6-96231b3b80d8
2010-09-03 15:26:42 +00:00
Jim Grosbach
1755b3964f For ARM stack frames that utilize variable sized objects and have either
large local stack areas or require dynamic stack realignment, allocate a
base register via which to access the local frame. This allows efficient
access to frame indices not accessible via the FP (either due to being out
of range or due to dynamic realignment) or the SP (due to variable sized
object allocation). In particular, this greatly improves efficiency of access
to spill slots in Thumb functions which contain VLAs.

rdar://7352504
rdar://8374540
rdar://8355680



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112883 91177308-0d34-0410-b5e6-96231b3b80d8
2010-09-02 22:29:01 +00:00
Jim Grosbach
e7c1416263 Now that register allocation properly considers reserved regs, simplify the
ARM register class allocation order functions to take advantage of that.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112841 91177308-0d34-0410-b5e6-96231b3b80d8
2010-09-02 18:14:29 +00:00
Chris Lattner
5bcb8a6112 temporarily revert r112664, it is causing a decoding conflict, and
the testcases should be merged.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112711 91177308-0d34-0410-b5e6-96231b3b80d8
2010-09-01 16:00:50 +00:00
Bill Wendling
43a6c5e2fc We have a chance for an optimization. Consider this code:
int x(int t) {
  if (t & 256)
    return -26;
  return 0;
}

We generate this:

     tst.w   r0, #256
     mvn     r0, #25
     it      eq
     moveq   r0, #0

while gcc generates this:

     ands    r0, r0, #256
     it      ne
     mvnne   r0, #25
     bx      lr

Scandalous really!

During ISel time, we can look for this particular pattern. One where we have a
"MOVCC" that uses the flag off of a CMPZ that itself is comparing an AND
instruction to 0. Something like this (greatly simplified):

  %r0 = ISD::AND ...
  ARMISD::CMPZ %r0, 0         @ sets [CPSR]
  %r0 = ARMISD::MOVCC 0, -26  @ reads [CPSR]

All we have to do is convert the "ISD::AND" into an "ARM::ANDS" that sets [CPSR]
when it's zero. The zero value will all ready be in the %r0 register and we only
need to change it if the AND wasn't zero. Easy!


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112664 91177308-0d34-0410-b5e6-96231b3b80d8
2010-08-31 22:41:22 +00:00
Bob Wilson
7a9ef44b3b Add alignment arguments to all the NEON load/store intrinsics.
Update all the tests using those intrinsics and add support for
auto-upgrading bitcode files with the old versions of the intrinsics.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112271 91177308-0d34-0410-b5e6-96231b3b80d8
2010-08-27 17:13:24 +00:00
Daniel Dunbar
3cc3283fcb ARM/Thumb2: Fix a misselect in getARMCmp, when attempting to adjust a signed
comparison that would overflow.
 - The other under/overflow cases can't actually happen because the immediates
   which would trigger them are legal (so we don't enter this code), but
   adjusted the style to make it clear the transform is always valid.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112053 91177308-0d34-0410-b5e6-96231b3b80d8
2010-08-25 16:58:05 +00:00
Bob Wilson
f955f290c9 Change ARM PKHTB and PKHBT instructions to use a shift_imm operand to avoid
printing "lsl #0".  This fixes the remaining parts of pr7792.  Make
corresponding changes for encoding/decoding these instructions.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@111251 91177308-0d34-0410-b5e6-96231b3b80d8
2010-08-17 17:23:19 +00:00
Bob Wilson
dc66edaced Generalize a pattern for PKHTB: an SRL of 16-31 bits will guarantee
that the high halfword is zero.  The shift need not be exactly 16 bits.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@111196 91177308-0d34-0410-b5e6-96231b3b80d8
2010-08-16 22:26:55 +00:00
Bob Wilson
b05b80160a Convert test to FileCheck.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@111195 91177308-0d34-0410-b5e6-96231b3b80d8
2010-08-16 22:21:13 +00:00
Bob Wilson
703af3ab12 Temporarily disable tail calls on ARM to work around some linker problems.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@111050 91177308-0d34-0410-b5e6-96231b3b80d8
2010-08-13 22:43:33 +00:00
Jim Grosbach
b5aa11f2d6 fix silly typo
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@110831 91177308-0d34-0410-b5e6-96231b3b80d8
2010-08-11 17:32:46 +00:00
Jim Grosbach
7166e622d7 Add a target triple, as the runtime library invocation varies a bit by
platform. It's apparently "bl __muldf3" on linux, for example. Since that's
not what we're checking here, it's more robust to just force a triple. We
just wwant to check that the inline FP instructions are only generated
on cpus that have them."



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@110830 91177308-0d34-0410-b5e6-96231b3b80d8
2010-08-11 17:31:12 +00:00
Dan Gohman
3cc5d13f58 Temporarily disable some failing tests, until they can be
properly investigated.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@110825 91177308-0d34-0410-b5e6-96231b3b80d8
2010-08-11 16:36:07 +00:00
Jim Grosbach
fcba5e6b64 cortex m4 has floating point support, but only single precision.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@110810 91177308-0d34-0410-b5e6-96231b3b80d8
2010-08-11 15:44:15 +00:00
Evan Cheng
7b4d31176e Report error if codegen tries to instantiate a ARM target when the cpu does support it. e.g. cortex-m* processors.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@110798 91177308-0d34-0410-b5e6-96231b3b80d8
2010-08-11 07:17:46 +00:00
Evan Cheng
11db068721 - Add subtarget feature -mattr=+db which determine whether an ARM cpu has the
memory and synchronization barrier dmb and dsb instructions.
- Change instruction names to something more sensible (matching name of actual
  instructions).
- Added tests for memory barrier codegen.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@110785 91177308-0d34-0410-b5e6-96231b3b80d8
2010-08-11 06:22:01 +00:00
Evan Cheng
ac096808a3 Re-apply r110655 with fixes. Epilogue must restore sp from fp if the function stack frame has a var-sized object.
Also added a test case to check for the added benefit of this patch: it's optimizing away the unnecessary restore of sp from fp for some non-leaf functions.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@110707 91177308-0d34-0410-b5e6-96231b3b80d8
2010-08-10 19:30:19 +00:00