This adds the bt/bf/bd(n)zt/bd(n)zf mnemonics as aliases for the
asm parser, resolving to the generic conditional patterns.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184725 91177308-0d34-0410-b5e6-96231b3b80d8
This should hopefully have fixed the stage2/stage3 miscompare on the dragonegg
testers.
"LoopVectorize: Use the dependence test utility class
We now no longer need alias analysis - the cases that alias analysis would
handle are now handled as accesses with a large dependence distance.
We can now vectorize loops with simple constant dependence distances.
for (i = 8; i < 256; ++i) {
a[i] = a[i+4] * a[i+8];
}
for (i = 8; i < 256; ++i) {
a[i] = a[i-4] * a[i-8];
}
We would be able to vectorize about 200 more loops (in many cases the cost model
instructs us no to) in the test suite now. Results on x86-64 are a wash.
I have seen one degradation in ammp. Interestingly, the function in which we
now vectorize a loop is never executed so we probably see some instruction
cache effects. There is a 2% improvement in h264ref. There is one or the other
TSCV loop kernel that speeds up.
radar://13681598"
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184724 91177308-0d34-0410-b5e6-96231b3b80d8
This adds instruction patterns to cover the generic forms of
the conditional branch instructions. This allows the assembler
to support the generic mnemonics.
The compiler will still generate the various specific forms
of the instruction that were already supported.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184722 91177308-0d34-0410-b5e6-96231b3b80d8
There is currently only limited support for the "absolute" variants
of branch instructions. This patch adds support for the absolute
variants of all branches that are currently otherwise supported.
This requires adding new fixup types so that the correct variant
of relocation type can be selected by the object writer.
While the compiler will continue to usually choose the relative
branch variants, this will allow the asm parser to fully support
the absolute branches, with either immediate (numerical) or
symbolic target addresses.
No change in code generation intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184721 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for the bd(n)zl and bd(n)zlrl instructions.
The patterns are currently used for the asm parser only.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184720 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds support for the conditional variants of bl.
The pattern is currently used by the asm parser only.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184719 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds support for blrl and its conditional variants.
The patterns are (currently) used for the asm parser only.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184718 91177308-0d34-0410-b5e6-96231b3b80d8
When encoded to thumb, VFP instruction and VMOV/VDUP between scalar and
core registers, must have their predicate bit to 0b1110.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184707 91177308-0d34-0410-b5e6-96231b3b80d8
In thumb1, NOP is a pseudo-instruction equivalent to mov r8, r8.
However the disassembler should not use this alias.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184703 91177308-0d34-0410-b5e6-96231b3b80d8
We now no longer need alias analysis - the cases that alias analysis would
handle are now handled as accesses with a large dependence distance.
We can now vectorize loops with simple constant dependence distances.
for (i = 8; i < 256; ++i) {
a[i] = a[i+4] * a[i+8];
}
for (i = 8; i < 256; ++i) {
a[i] = a[i-4] * a[i-8];
}
We would be able to vectorize about 200 more loops (in many cases the cost model
instructs us no to) in the test suite now. Results on x86-64 are a wash.
I have seen one degradation in ammp. Interestingly, the function in which we
now vectorize a loop is never executed so we probably see some instruction
cache effects. There is a 2% improvement in h264ref. There is one or the other
TSCV loop kernel that speeds up.
radar://13681598
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184685 91177308-0d34-0410-b5e6-96231b3b80d8
Untill now we detected the vectorizable tree and evaluated the cost of the
entire tree. With this patch we can decide to trim-out branches of the tree
that are not profitable to vectorizer.
Also, increase the max depth from 6 to 12. In the worse possible case where all
of the code is made of diamond-shaped graph this can bring the cost to 2**10,
but diamonds are not very common.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184681 91177308-0d34-0410-b5e6-96231b3b80d8
This makes it possible to write unit tests that are less susceptible
to minor code motion, particularly copy placement. block-placement.ll
covers this case with -pre-RA-sched=source which will soon be
default. One incorrectly named block is already fixed, but without
this fix, enabling new coalescing and scheduling would cause more
failures.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184680 91177308-0d34-0410-b5e6-96231b3b80d8
This is an awful implementation of the target hook. But we don't have
abstractions yet for common machine ops, and I don't see any quick way
to make it table-driven.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184664 91177308-0d34-0410-b5e6-96231b3b80d8
Rewrote the SLP-vectorization as a whole-function vectorization pass. It is now able to vectorize chains across multiple basic blocks.
It still does not vectorize PHIs, but this should be easy to do now that we scan the entire function.
I removed the support for extracting values from trees.
We are now able to vectorize more programs, but there are some serious regressions in many workloads (such as flops-6 and mandel-2).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184647 91177308-0d34-0410-b5e6-96231b3b80d8
Although in reality the symbol table in ELF resides in a section, the
standard requires that there be no more than one SHT_SYMTAB. To enforce
this constraint, it is cleaner to group all the symbols under a
top-level `Symbols` key on the object file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184627 91177308-0d34-0410-b5e6-96231b3b80d8
It wouldn't really test anything that doesn't already have a more
targeted test:
`yaml2obj-elf-section-basic.yaml`:
Already tests that section content is correctly passed though.
`yaml2obj-elf-symbol-basic.yaml` (this file):
Tests that the st_value and st_size attributes of `main` are set
correctly.
Between those two tests, disassembling the file doesn't really add
anything, so just remove mention of disassembling the file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184607 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r184602. In an upcoming commit, I will just remove
the disassembler part of the test; it was mostly just a "nifty" thing
marking a milestone but it doesn't test anything that isn't tested
elsewhere.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184606 91177308-0d34-0410-b5e6-96231b3b80d8
A FastISel optimization was causing us to emit no information for such
parameters & when they go missing we end up emitting a different
function type. By avoiding that shortcut we not only get types correct
(very important) but also location information (handy) - even if it's
only live at the start of a function & may be clobbered later.
Reviewed/discussion by Evan Cheng & Dan Gohman.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184604 91177308-0d34-0410-b5e6-96231b3b80d8
This was causing buildbot failures when build without X86 support.
Is there a way to conditionalize the test on the X86 target being
present?
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184597 91177308-0d34-0410-b5e6-96231b3b80d8
Zero is used by BlockFrequencyInfo as a special "don't know" value. It also
causes a sink for frequencies as you can't ever get off a zero frequency with
more multiplies.
This recovers a 10% regression on MultiSource/Benchmarks/7zip. A zero frequency
was propagated into an inner loop causing excessive spilling.
PR16402.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184584 91177308-0d34-0410-b5e6-96231b3b80d8
IR for CUDA should use "nvptx[64]-nvidia-cuda", and IR for NV OpenCL should use "nvptx[64]-nvidia-nvcl"
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184579 91177308-0d34-0410-b5e6-96231b3b80d8
When (srl (anyextend x), c) is folded into (anyextend (srl x, c)), the
high bits are not cleared. Add 'and' to clear off them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184575 91177308-0d34-0410-b5e6-96231b3b80d8
The GNU assembler supports (as extension to the ABI) use of PC-relative
relocations in half16 fields, which allows writing code like:
li 1, base-.
This patch adds support for those relocation types in the assembler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184552 91177308-0d34-0410-b5e6-96231b3b80d8
The current code base only supports the minimum set of tls-related
relocations and @modifiers that are necessary to support compiler-
generated code. This patch extends this to the full set defined
in the ABI (and supported by the GNU assembler) for the benefit
of the assembler parser.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184551 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for the @higher, @highera, @highest, and @highesta
modifers, including some missing relocation types.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184550 91177308-0d34-0410-b5e6-96231b3b80d8
This adds the relocation type and other necessary infrastructure
to use the @toc@h modifier in the assembler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184549 91177308-0d34-0410-b5e6-96231b3b80d8
This adds necessary infrastructure to support the @h modifier.
Note that all required relocation types were already present
(and unused).
This patch provides support for using @h in the assembler;
it would also be possible to now use this feature in code
generated by the compiler, but this is not done yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184548 91177308-0d34-0410-b5e6-96231b3b80d8
The output can be in different orders, which breaks the test in some
situations. I have not yet found out what the root cause of the order
difference is. This fixes our internal build. If it is not the right
solution, feel free to roll back.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184535 91177308-0d34-0410-b5e6-96231b3b80d8
Previously we unconditionally enforced that section references in
symbols in the YAML had a name that was a section name present in the
object, and linked the references to that section. Now, permit empty
section names (already the default, if the `Section` key is not
provided) to indicate SHN_UNDEF.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184513 91177308-0d34-0410-b5e6-96231b3b80d8
Instead, just have 3 sub-lists, one for each of
{STB_LOCAL,STB_GLOBAL,STB_WEAK}.
This allows us to be a lot more explicit w.r.t. the symbol ordering in
the object file, because if we allowed explicitly setting the STB_*
`Binding` key for the symbol, then we might have ended up having to
shuffle STB_LOCAL symbols to the front of the list, which is likely to
cause confusion and potential for error.
Also, this new approach is simpler ;)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184506 91177308-0d34-0410-b5e6-96231b3b80d8
it at the moment.
This allows to form more paired loads even when stack coloring pass destroys the
memoryoperand's value.
<rdar://problem/13978317>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184492 91177308-0d34-0410-b5e6-96231b3b80d8
This is a bit tricky as the xacquire and xrelease hints use the same bytes,
0xf2 and 0xf3, as the repne and rep prefixes.
Fortunately llvm has different llvm MCInst Opcode enums for rep/xrelease
and repne/xacquire. So to make this work a boolean was added the
InternalInstruction struct as part of the Prefix state which is set with the
added logic in readPrefixes() when decoding an instruction to determine
if these prefix bytes are to be disassembled as xacquire or xrelease. Then
we let the matcher pick the normal prefix instructionID and we change the
Opcode after that when it is set into the MCInst being created.
rdar://11019859
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184490 91177308-0d34-0410-b5e6-96231b3b80d8
Also add a v2i32 test to the existing v4i32 test.
Patch by: Aaron Watry
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Signed-off-by: Aaron Watry<awatry@gmail.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184482 91177308-0d34-0410-b5e6-96231b3b80d8
Also add SI tests to existing file and a v2i32 test for both
R600 and SI.
Patch by: Aaron Watry
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Signed-off-by: Aaron Watry <awatry@gmail.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184481 91177308-0d34-0410-b5e6-96231b3b80d8
The custom lowering causes llc to crash with a segfault.
Ideally, the custom lowering can be fixed, but this allows
programs which load/store v2i32 to work without crashing.
Patch by: Aaron Watry
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Signed-off-by: Aaron Watry<awatry@gmail.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184480 91177308-0d34-0410-b5e6-96231b3b80d8
After this patch, the ELF file produced by
`yaml2obj-elf-symbol-basic.yaml`, when linked and executed on x86_64
(under SysV ABI, obviously; I tested on Linux), produces a working
executable that goes into an infinite loop!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184469 91177308-0d34-0410-b5e6-96231b3b80d8
The cdp2 instruction should have the same restrictions as cdp on the
co-processor registers.
VFP instructions on v8/AArch32 share the same encoding space as cdp2.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184445 91177308-0d34-0410-b5e6-96231b3b80d8
We collect gather sequences when we vectorize basic blocks. Gather sequences are excellent
hints for vectorization of other basic blocks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184444 91177308-0d34-0410-b5e6-96231b3b80d8
The assembler parser common code supports recognizing symbol variants
using the @ modifer. On PowerPC, it should also be possible to use
(some of) those modifiers with directional labels, like "1f@l".
This patch adds support for accepting symbol variants on directional
labels as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184437 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds support for having the assembler optimize fixups
to constructs like "symbol@ha" or "symbol@l" if "symbol" can be
resolved at assembler time.
This optimization is already present in the PPCMCExpr.cpp code
for handling PPC_HA16/PPC_LO16 target expressions. However,
those target expression were used only on Darwin targets.
This patch changes target expression code so that they are
usable also with the GNU assembler (using the @ha / @l syntax
instead of the ha16() / lo16() syntax), and changes the
MCInst lowering code to generate those target expressions
where appropriate.
It also changes the asm parser to generate HA16/LO16 target
expressions when parsing assembler source that uses the
@ha / @l modifiers. The effect is that now the above-
mentioned optimization automatically becomes available
for those situations too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184436 91177308-0d34-0410-b5e6-96231b3b80d8
Original message:
Don't include directory names in archives.
This matches the behavior of both gnu and os x versions of ar.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184423 91177308-0d34-0410-b5e6-96231b3b80d8
Fix up three tests - one that was relying on abbreviation number,
another relying on a location list in this case (& testing raw asm,
changed that to use dwarfdump on the debug_info now that that's where
the location is), and another which was added in r184368 - exposing a
bug in that fix that is exposed when we emit the location inline rather
than through a location list. Fix that bug while I'm here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184387 91177308-0d34-0410-b5e6-96231b3b80d8
We had been papering over a problem with location info for non-trivial
types passed by value by emitting their type as references (this caused
the debugger to interpret the location information correctly, but broke
the type of the function). r183329 corrected the type information but
lead to the debugger interpreting the pointer parameter as the value -
the debug info describing the location needed an extra dereference.
Use a new flag in DIVariable to add the extra indirection (either by
promoting an existing DW_OP_reg (parameter passed in a register) to
DW_OP_breg + 0 or by adding DW_OP_deref to an existing DW_OP_breg + n
(parameter passed on the stack).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184368 91177308-0d34-0410-b5e6-96231b3b80d8
This is a basic implementation - we still don't have any support (that I
know of) for dumping DWARF expressions in a meaningful way, so the
location information itself is just printed as a sequence of bytes as we
do elsewhere.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184361 91177308-0d34-0410-b5e6-96231b3b80d8
The compiler occasionally generates multiple .loc directives in a row
(at the same instruction address). These need to be transformed into
multple actual .debug_line table entries, since they are used to signal
certain information to the debugger (e.g. if the opening brace of a
function body is on the same line as the declaration).
The MCAsmStreamer version of EmitDwarfLocDirective handles this
correctly by emitting a .loc directive every time it is called.
However, the MCObjectStream version simply defaults to recording
the information and emitting only a single table entry later,
e.g. when EmitInstruction is called.
This patch introduces a MCAsmStreamer::EmitDwarfLocDirective
version that emits a line table entry for a .loc directive
that may already be pending before recording the new directive.
(This is similar to how this is handled in GNU as.)
With this patch (and the code alignment factor patch) applied,
I'm now getting identical DWARF .debug sections for all test-suite
object files on PowerPC for the internal and the external assembler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184357 91177308-0d34-0410-b5e6-96231b3b80d8
Prior to this change, the considered addressing modes may be invalid since the
maximum and minimum offsets were not taking into account.
This was causing an assertion failure.
The added test case exercices that behavior.
<rdar://problem/14199725> Assertion failed: (CurScaleCost >= 0 && "Legal
addressing mode has an illegal cost!")
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184341 91177308-0d34-0410-b5e6-96231b3b80d8
The type <3 x i8> is a common in graphics and we want to be able to vectorize it.
This changes accelerates bullet by 12% and 471_omnetpp by 5%.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184317 91177308-0d34-0410-b5e6-96231b3b80d8
"When assembling to the ARM instruction set, the .N qualifier produces
an assembler error and the .W qualifier has no effect."
In the pre-matcher handler in the asm parser the ".w" (wide) qualifier
when in ARM mode is now discarded. And an error message is now
produced when the ".n" (narrow) qualifier is used in ARM mode.
Test cases for these were added.
rdar://14064574
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184224 91177308-0d34-0410-b5e6-96231b3b80d8
value is zero.
This allows optmizations to kick in more easily.
Fix some test cases so that they remain meaningful (i.e., not completely dead
coded) when optimizations apply.
<rdar://problem/14096009> superfluous multiply by high part of zero-extended
value.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184222 91177308-0d34-0410-b5e6-96231b3b80d8
When producing objects that are abi compliant we are
marking neither the object file nor the assembly file
correctly and thus generate warnings.
We need to set the EF_CPIC flag in the ELF header when
generating direct object.
Note that the warning is only generated when compiling without PIC.
When compiling with clang the warning will be suppressed by supplying:
-Wa,-mno-shared -Wa,-call_nonpic
Also the following directive should also be added:
.option pic0
when compiling without PIC, This eliminates the need for supplying:
-mno-shared -call_nonpic
on the assembler command line.
Patch by Douglas Gilmore
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184220 91177308-0d34-0410-b5e6-96231b3b80d8
For decoding, keep the current behavior of always decoding these as their REP
versions. In the future, this could be improved to recognize the cases where
these behave as XACQUIRE and XRELEASE and decode them as such.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184207 91177308-0d34-0410-b5e6-96231b3b80d8
When using a positive offset, literal loads where encoded
as if it was negative, because:
- The sign bit was not assigned to an operand
- The addrmode_imm12 operand was not encoding the sign bit correctly
This patch also makes the assembler look at the .w/.n specifier for
loads.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184182 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes two previous issues:
- Negative offsets were not correctly disassembled
- The decoded opcodes were not the right one
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184180 91177308-0d34-0410-b5e6-96231b3b80d8
The main advantages here are way better heuristics, taking into account not
just loop depth but also __builtin_expect and other static heuristics and will
eventually learn how to use profile info. Most of the work in this patch is
pushing the MachineBlockFrequencyInfo analysis into the right places.
This is good for a 5% speedup on zlib's deflate (x86_64), there were some very
unfortunate spilling decisions in its hottest loop in longest_match(). Other
benchmarks I tried were mostly neutral.
This changes register allocation in subtle ways, update the tests for it.
2012-02-20-MachineCPBug.ll was deleted as it's very fragile and the instruction
it looked for was gone already (but the FileCheck pattern picked up unrelated
stuff).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184105 91177308-0d34-0410-b5e6-96231b3b80d8
vectorizing loops with memory accesses to non-zero address spaces. It
simply dropped the AS info. Fixes PR16306.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184103 91177308-0d34-0410-b5e6-96231b3b80d8
llvm-objdump should provide some way of printing out the addends present in the
.rela sections for debugging purposes if nothing else.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184072 91177308-0d34-0410-b5e6-96231b3b80d8
Rather than using the full power of target-specific addressing modes in
DBG_VALUEs with Frame Indicies, simply use Frame Index + Offset. This
reduces the complexity of debug info handling down to two
representations of values (reg+offset and frame index+offset) rather
than three or four.
Ideally we could ensure that frame indicies had been eliminated by the
time we reached an assembly or dwarf generation, but I haven't spent the
time to figure out where the FIs are leaking through into that & whether
there's a good place to convert them. Some FI+offset=>reg+offset
conversion is done (see PrologEpilogInserter, for example) which is
necessary for some SelectionDAG assumptions about registers, I believe,
but it might be possible to make this a more thorough conversion &
ensure there are no remaining FIs no matter how instruction selection
is performed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184066 91177308-0d34-0410-b5e6-96231b3b80d8
Replace the ill-defined MinLatency and ILPWindow properties with
with straightforward buffer sizes:
MCSchedMode::MicroOpBufferSize
MCProcResourceDesc::BufferSize
These can be used to more precisely model instruction execution if desired.
Disabled some misched tests temporarily. They'll be reenabled in a few commits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184032 91177308-0d34-0410-b5e6-96231b3b80d8
Also add a seperate vector lit test file, since r600 doesn't seem to handle
v2i32 load/store yet, but we can test both for SI.
Patch by: Aaron Watry
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Signed-off-by: Aaron Watry <awatry@gmail.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184021 91177308-0d34-0410-b5e6-96231b3b80d8
Archive files (.a) can have a symbol table indicating which object
files in them define which symbols. The purpose of this symbol table
is to speed up linking by allowing the linker the read only the .o
files it is actually going to use instead of having to parse every
object's symbol table.
LLVM's archive library currently supports a LLVM specific format for
such table. It is hard to see any value in that now that llvm-ld is
gone:
* System linkers don't use it: GNU ar uses the same plugin as the
linker to create archive files with a regular index. The OS X ar
creates no symbol table for IL files, I assume the linker just parses
all IL files.
* It doesn't interact well with archives having both IL and native objects.
* We probably don't want to be responsible for yet another archive
format variant.
This patch then:
* Removes support for creating and reading such index from lib/Archive.
* Remove llvm-ranlib, since there is nothing left for it to do.
We should in the future add support for regular indexes to llvm-ar for
both native and IL objects. When we do that, llvm-ranlib should be
reimplemented as a symlink to llvm-ar, as it is equivalent to "ar s".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184019 91177308-0d34-0410-b5e6-96231b3b80d8
We were using RAT_INST_STORE_RAW, which seemed to work, but the docs
say this instruction doesn't exist for Cayman, so it's probably safer
to use a documented instruction instead.
Reviewed-by: Vincent Lejeune<vljn at ovi.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184015 91177308-0d34-0410-b5e6-96231b3b80d8
When we're rematerializing into a not-quite-right register we already add the
real definition as an imp-def, but we should also be marking the "official"
register as dead, since nothing else is going to use it as a result of this
remat.
Not doing this can affect pressure tracking.
rdar://problem/14158833
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184002 91177308-0d34-0410-b5e6-96231b3b80d8
(-llc), similarly to the way it was done for clang and llvmc.
This doesn't affect the upstream llvm tests but helps when developing custom
LLVM-based tools and testing them within the LLVM regression framework.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183994 91177308-0d34-0410-b5e6-96231b3b80d8
in functions which call __builtin_unwind_init()
__builtin_unwind_init() is an undocumented gcc intrinsic which has this effect,
and is used in libgcc_eh.
Goes part of the way toward fixing PR8541.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183984 91177308-0d34-0410-b5e6-96231b3b80d8
This is a resubmit of r182877, which was reverted because it broken
MCJIT tests on ARM. The patch leaves MCJIT on ARM as it was before: only
enabled for iOS. I've CC'ed people from the original review and revert.
FastISel was only enabled for iOS ARM and Thumb2, this patch enables it
for ARM (not Thumb2) on Linux and NaCl, but not MCJIT.
Thumb2 support needs a bit more work, mainly around register class
restrictions.
The patch punts to SelectionDAG when doing TLS relocation on non-Darwin
targets. I will fix this and other FastISel-to-SelectionDAG failures in
a separate patch.
The patch also forces FastISel to retain frame pointers: iOS always
keeps them for backtracking (so emitted code won't change because of
this), but Linux was getting much worse code that was incorrect when
using big frames (such as test-suite's lencod). I'll also fix this in a
later patch, it will probably require a peephole so that FastISel
doesn't rematerialize frame pointers back-to-back.
The test changes are straightforward, similar to:
http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20130513/174279.html
They also add a vararg test that got dropped in that change.
I ran all of lnt test-suite on A15 hardware with --optimize-option=-O0
and all the tests pass. All the tests also pass on x86 make check-all. I
also re-ran the check-all tests that failed on ARM, and they all seem to
pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183966 91177308-0d34-0410-b5e6-96231b3b80d8
For consistency, change the address in the test case from 0xDEADBEEF to
0xCAFEBABE since 0xCAFEBABE that actually has a 2-byte alignment.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183962 91177308-0d34-0410-b5e6-96231b3b80d8
The current functionality is extremely basic and a bit rough around the
edges, but it will flesh out in future commits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183953 91177308-0d34-0410-b5e6-96231b3b80d8
This is a preliminary patch for fast instruction selection on
PowerPC. Code generation can differ between DAG isel and fast isel.
Existing tests that specify -O0 were written to expect DAG isel. Make
this explicit by adding -fast-isel=false to the tests.
In some cases specifying -fast-isel=false produces different code even
when there isn't a fast instruction selector specified. This is
because TM.Options.EnableFastISel = 1 at -O0 whether or not a FastISel
object exists. Thus disabling fast isel can actually produce less
conservative code. Because of this, some of the expected code
generation in the -O0 tests needs to be adjusted.
In particular, handling of function arguments is less conservative
with -fast-isel=false (see isOnlyUsedInEntryBlock() in
SelectionDAGBuilder.cpp). This results in fewer stack accesses and,
in some cases, reduced stack size as uselessly loaded values are no
longer stored back to spill locations in the stack.
No functional change with this patch; test case adjustments only.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183939 91177308-0d34-0410-b5e6-96231b3b80d8
This pass was assuming that if hasAddressTaken() returns false for a
function, the function's only uses are call sites. That's not true
because there can be references by BlockAddresses too.
Fix the pass to handle this case. Fix
BlockAddress::replaceUsesOfWithOnConstant() to allow a function's type
to be changed by RAUW'ing the function with a bitcast of the recreated
function.
Patch by Mark Seaborn.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183933 91177308-0d34-0410-b5e6-96231b3b80d8
I've been comparing the object file output of LLVM's integrated
assembler against the external assembler on PowerPC, and one
area where differences still remain are in DWARF sections.
In particular, the GNU assembler generates .debug_frame and
.debug_line sections using a code alignment factor of 4, since
all PowerPC instructions have size 4 and must be aligned to a
multiple of 4. However, current MC code hard-codes a code
alignment factor of 1.
This patch changes this by adding a "minimum instruction alignment"
data element to MCAsmInfo and using this as code alignment factor.
This requires passing a MCContext into MCDwarfLineAddr::Encode
and MCDwarfLineAddr::EncodeAdvanceLoc. Note that one caller,
MCDwarfLineAddr::Write, didn't actually have that information
available. However, it turns out that this routine is in fact
never used in the whole code base, so the patch simply removes
it. If it turns out to be needed again at a later time, it
could be re-added with an updated interface.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183834 91177308-0d34-0410-b5e6-96231b3b80d8
A couple of old test cases in test/MC/PowerPC were still using
LLVM IR. Now that we have a working assembler, we can move
them to assembler tests instead:
ppc64-initial-cfa.ll
ppc64-relocs-01.ll
ppc64-tls-relocs-01.ll
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183829 91177308-0d34-0410-b5e6-96231b3b80d8
This test case was a "sanity check"/"breathing" test case at first, but
is really fragile, which impairs changes to yaml2obj.
`test/Object/yaml2obj-elf-bits-endian.test` is much more robust and
serves as an adequate sanity check.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183811 91177308-0d34-0410-b5e6-96231b3b80d8
The pass emits a call to sqrt that has attribute "read-none". This call will be
converted to an ISD::FSQRT node during DAG construction, which will turn into
a mips native sqrt instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183802 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of a custom implementation of replaceAllUsesWith, we just call
replaceAllUsesWith and recreate llvm.used and llvm.compiler-used.
This change is particularity interesting because it makes llvm see
through what clang is doing with static used functions in extern "C"
contexts. With this change, running clang -O2 in
extern "C" {
__attribute__((used)) static void foo() {}
}
produces
@llvm.used = appending global [1 x i8*] [i8* bitcast (void ()* @foo to
i8*)], section "llvm.metadata"
define internal void @foo() #0 {
entry:
ret void
}
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183756 91177308-0d34-0410-b5e6-96231b3b80d8
Negative zero is returned by the primary expression parser as INT32_MIN, so all that the method needs to do is to accept this value.
Behavior already present for Thumb2.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183734 91177308-0d34-0410-b5e6-96231b3b80d8
- Don't use assert(0), or tests may pass or fail according to assertions.
- For now, The tests are marked as XFAIL for win32 hosts.
FIXME: Could we avoid XFAIL to specify triple in the RUN lines?
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183728 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, only emitting the ELF header is supported (no sections or
segments).
The ELFYAML code organization is broadly similar to the COFFYAML code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183711 91177308-0d34-0410-b5e6-96231b3b80d8
Some ARM CPUs only support ARM mode (ancient v4 ones, for example) and some
only support Thumb mode (M-class ones currently). This makes sure such CPUs
default to the correct mode and makes the AsmParser diagnose an attempt to
switch modes incorrectly.
rdar://14024354
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183710 91177308-0d34-0410-b5e6-96231b3b80d8
