This allows a subtarget to explicitly specify the issue width and
other properties without providing pipeline stage details for every
instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157979 91177308-0d34-0410-b5e6-96231b3b80d8
valid itinerary but no pipeline stages.
An itinerary can contain useful scheduling information without specifying pipeline stages for each instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157977 91177308-0d34-0410-b5e6-96231b3b80d8
If integer overflow causes one of the terms to reach zero, that can
force the entire expression to zero.
Fixes PR12929: cast<Ty>() argument of incompatible type
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157673 91177308-0d34-0410-b5e6-96231b3b80d8
The Hazard checker implements in-order contraints, or interlocked
resources. Ready instructions with hazards do not enter the available
queue and are not visible to other heuristics.
The major code change is the addition of SchedBoundary to encapsulate
the state at the top or bottom of the schedule, including both a
pending and available queue.
The scheduler now counts cycles in sync with the hazard checker. These
are minimum cycle counts based on known hazards.
Targets with no itinerary (x86_64) currently remain at cycle 0. To fix
this, we need to provide some maximum issue width for all targets. We
also need to add the concept of expected latency vs. minimum latency.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157427 91177308-0d34-0410-b5e6-96231b3b80d8
getUDivExpr attempts to simplify by checking for overflow.
isLoopEntryGuardedByCond then evaluates the loop predicate which
may lead to the same getUDivExpr causing endless recursion.
Fixes PR12868: clang 3.2 segmentation fault.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157092 91177308-0d34-0410-b5e6-96231b3b80d8
Introduce the basic strategy for register pressure scheduling.
1) Respect target limits at all times.
2) Indentify critical register classes (pressure sets).
Track pressure within the scheduled region.
Avoid increasing scheduled pressure for critical registers.
3) Avoid exceeding the max pressure of the region prior to scheduling.
Added logic for picking between the top and bottom ready Q's based on
regpressure heuristics.
Status: functional but needs to be asjusted to achieve good results.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157006 91177308-0d34-0410-b5e6-96231b3b80d8
This feature avoids creating edges in the scheduler's dependence graph
for non-aliasing memory operations according to whichever alias
analysis is available. It has been fully tested in Hexagon. Before
making this default, it needs to be extended to handle multiple
MachineMemOperands, compile time needs more evaluation, and
benchmarking on X86 and ARM is needed.
Patch by Sergei Larin!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156842 91177308-0d34-0410-b5e6-96231b3b80d8
Prioritize the instruction that comes closest to keeping pressure
under the target's limit. Then prioritize instructions that avoid
increasing the max pressure in the scheduled region. The max pressure
heuristic is a tad aggressive. Later I'll fix it to consider the
unscheduled pressure as well.
WIP: This is mostly functional but untested and not likely to do much good yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156574 91177308-0d34-0410-b5e6-96231b3b80d8
Added getMaxExcessUpward/DownwardPressure. They somewhat abuse the
tracker by speculatively handling an instruction out of order. But it
is convenient for now. In the future, we will cache each instruction's
pressure contribution to make this efficient.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156561 91177308-0d34-0410-b5e6-96231b3b80d8
The ensures that virtual registers always belong to an allocatable class.
If your target attempts to create a vreg for an operand that has no
allocatable register subclass, you will crash quickly.
This ensures that targets define register classes as intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156046 91177308-0d34-0410-b5e6-96231b3b80d8
This time, also fix the caller of AddGlue to properly handle
incomplete chains. AddGlue had failure modes, but shamefully hid them
from its caller. It's luck ran out.
Fixes rdar://11314175: BuildSchedUnits assert.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155749 91177308-0d34-0410-b5e6-96231b3b80d8
DAGCombine strangeness may result in multiple loads from the same
offset. They both may try to glue themselves to another load. We could
insist that the redundant loads glue themselves to each other, but the
beter fix is to bail out from bad gluing at the time we detect it.
Fixes rdar://11314175: BuildSchedUnits assert.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155668 91177308-0d34-0410-b5e6-96231b3b80d8
The DAG builder is a convenient place to do it. Hopefully this is more
efficient than a separate traversal over the same region.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155456 91177308-0d34-0410-b5e6-96231b3b80d8
MachineInstr sequence.
This uses the new target interface for tracking register pressure
using pressure sets to model overlapping register classes and
subregisters.
RegisterPressure results can be tracked incrementally or stored at
region boundaries. Global register pressure can be deduced from local
RegisterPressure results if desired.
This is an early, somewhat untested implementation. I'm working on
testing it within the context of a register pressure reducing
MachineScheduler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155454 91177308-0d34-0410-b5e6-96231b3b80d8
This nicely handles the most common case of virtual register sets, but
also handles anticipated cases where we will map pointers to IDs.
The goal is not to develop a completely generic SparseSet
template. Instead we want to handle the expected uses within llvm
without any template antics in the client code. I'm adding a bit of
template nastiness here, and some assumption about expected usage in
order to make the client code very clean.
The expected common uses cases I'm designing for:
- integer keys that need to be reindexed, and may map to additional
data
- densely numbered objects where we want pointer keys because no
number->object map exists.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155227 91177308-0d34-0410-b5e6-96231b3b80d8
This introduces a threshold of 200 IV Users, which is very
conservative but should be sufficient to avoid serious compile time
sink or stack overflow. The llvm test-suite with LTO never exceeds 190
users per loop.
The bug doesn't relate to a specific type of loop. Checking in an
arbitrary giant loop as a unit test would be silly.
Fixes rdar://11262507.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154983 91177308-0d34-0410-b5e6-96231b3b80d8
This is a special flag for targets that really want their block
terminators in the DAG. The default scheduler cannot handle this
correctly, so it becomes the specialized scheduler's responsibility to
schedule terminators.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154712 91177308-0d34-0410-b5e6-96231b3b80d8
Handle mixing allocatable and unallocatable register gracefully.
Simplify the pruning of register unit sets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154474 91177308-0d34-0410-b5e6-96231b3b80d8
Take this opportunity to generalize the indirectbr bailout logic for
loop transformations. CFG transformations will never get indirectbr
right, and there's no point trying.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154386 91177308-0d34-0410-b5e6-96231b3b80d8
This is a new algorithm that finds sets of register units that can be
used to model registers pressure. This handles arbitrary, overlapping
register classes. Each register class is associated with a (small)
list of pressure sets. These are the dimensions of pressure affected
by the register class's liveness.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154374 91177308-0d34-0410-b5e6-96231b3b80d8
This is a new algorithm that associates registers with weighted
register units to accuretely model their effect on register
pressure. This handles registers with multiple overlapping
subregisters. It is possible, but almost inconceivable that the
algorithm fails to find an exact solution for a target description. If
an exact solution cannot be found, an inexact, but reasonable solution
will be chosen.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154373 91177308-0d34-0410-b5e6-96231b3b80d8
First small step toward modeling multi-register multi-pressure. In the
future, register units can also be used to model liveness and
aliasing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153794 91177308-0d34-0410-b5e6-96231b3b80d8
Andrew Trick