makes their special-case checks of use_size() less beneficial,
so remove them. This eliminates all but one use of use_size(),
which is in AssignTopologicalOrder, which uses it only once for
each node, and so can reasonably afford to recompute it, as
this allows the UsesSize field of SDNode to be removed
altogether.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53377 91177308-0d34-0410-b5e6-96231b3b80d8
class, and store IsVolatile and Alignment in a more compact form.
This makes AtomicSDNode slightly larger, but it shrinks LoadSDNode
and StoreSDNode, which are much more common and are the largest of
the SDNode subclasses. Also, this lets the isVolatile() and
getAlignment() accessors be non-virtual.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53361 91177308-0d34-0410-b5e6-96231b3b80d8
available to getAtomic in addition to just getLoad and getStore,
to prevent MachineMemOperands with 0 alignment.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53261 91177308-0d34-0410-b5e6-96231b3b80d8
and reused across SelectionDAGs.
This drastically reduces the number of calls to malloc/free made during
instruction selection, and improves memory locality.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53211 91177308-0d34-0410-b5e6-96231b3b80d8
properly track dead nodes that are on the original SDNode's operand
list but not the new one, and have no other uses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53201 91177308-0d34-0410-b5e6-96231b3b80d8
simple const SDOperand*, which is what's usually needed.
For AddNodeIDOperands, which is small, just duplicate the function to
accept an SDUse*.
For SelectionDAG::getNode - Add an overload that accepts SDUse* that
copies the operands into a temporary SDOperand array, but also has
special-case checks for 0 through 3 operands to avoid the copy in
the common cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53183 91177308-0d34-0410-b5e6-96231b3b80d8
that fixed problems in EmitStackConvert where the source and target type
have different alignment by creating a stack slot with the max
alignment of source and target type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53150 91177308-0d34-0410-b5e6-96231b3b80d8
SelectionDAG::SelectNodeTo in the instruction selector. This
updates existing nodes in place instead of creating new ones.
Go back to selecting ISD::DBG_LABEL nodes into
TargetInstrInfo::DBG_LABEL nodes instead of leaving them
unselected, now that SelectNodeTo allows us to update them
in place.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53057 91177308-0d34-0410-b5e6-96231b3b80d8
to be passed the list of value types, and use this
where appropriate. Inappropriate places are where
the value type list is already known and may be
long, in which case the existing method is more
efficient.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53035 91177308-0d34-0410-b5e6-96231b3b80d8
the need for a flavor operand, and add a new SDNode subclass,
LabelSDNode, for use with them to eliminate the need for a label id
operand.
Change instruction selection to let these label nodes through
unmodified instead of creating copies of them. Teach the MachineInstr
emitter how to emit a MachineInstr directly from an ISD label node.
This avoids the need for allocating SDNodes for the label id and
flavor value, as well as SDNodes for each of the post-isel label,
label id, and label flavor.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52943 91177308-0d34-0410-b5e6-96231b3b80d8
purpose, and give it a custom SDNode subclass so that it doesn't
need to have line number, column number, filename string, and
directory string, all existing as individual SDNodes to be the
operands.
This was the only user of ISD::STRING, StringSDNode, etc., so
remove those and some associated code.
This makes stop-points considerably easier to read in
-view-legalize-dags output, and reduces overhead (creating new
nodes and copying std::strings into them) on code containing
debugging information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52924 91177308-0d34-0410-b5e6-96231b3b80d8
it impossible to create a MERGE_VALUES node with
only one result: sometimes it is useful to be able
to create a node with only one result out of one of
the results of a node with more than one result, for
example because the new node will eventually be used
to replace a one-result node using ReplaceAllUsesWith,
cf X86TargetLowering::ExpandFP_TO_SINT. On the other
hand, most users of MERGE_VALUES don't need this and
for them the optimization was valuable. So add a new
utility method getMergeValues for creating MERGE_VALUES
nodes which by default performs the optimization.
Change almost everywhere to use getMergeValues (and
tidy some stuff up at the same time).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52893 91177308-0d34-0410-b5e6-96231b3b80d8
Move GetConstantStringInfo to lib/Analysis. Remove
string output routine from Constant. Update all
callers. Change debug intrinsic api slightly to
accomodate move of routine, these now return values
instead of strings.
This unbreaks llvm-gcc bootstrap.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52884 91177308-0d34-0410-b5e6-96231b3b80d8
string output routine from Constant. Update all
callers. Change debug intrinsic api slightly to
accomodate move of routine, these now return values
instead of strings.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52748 91177308-0d34-0410-b5e6-96231b3b80d8
shift.
- Add a readme entry for a missing vector_shuffle optimization that results in
awful codegen.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52740 91177308-0d34-0410-b5e6-96231b3b80d8
For this it is convenient to permit floats to
be used with EXTRACT_ELEMENT, so I tweaked
things to allow that. I also added libcalls
for ppcf128 to i32 forms of FP_TO_XINT, since
they exist in libgcc and this case can certainly
occur (and does occur in the testsuite) - before
the i64 libcall was being used. Also, the
XINT_TO_FP result seemed to be wrong when
the argument is an i128: the wrong fudge
factor was added (the i32 and i64 cases were
handled directly, but the i128 code fell
through to some generic softening code which
seemed to think it was i64 to f32!). So I
fixed it by adding a fudge factor that I
found in my breakfast cereal.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52739 91177308-0d34-0410-b5e6-96231b3b80d8
Added abstract class MemSDNode for any Node that have an associated MemOperand
Changed atomic.lcs => atomic.cmp.swap, atomic.las => atomic.load.add, and
atomic.lss => atomic.load.sub
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52706 91177308-0d34-0410-b5e6-96231b3b80d8
maps can be deleted. This happens when RAUW
replaces a node N with another equivalent node
E, deleting the first node. Solve this by
adding (N, E) to ReplacedNodes, which is already
used to remap nodes to replacements. This means
that deleted nodes are being allowed in maps,
which can be delicate: the memory may be reused
for a new node which might get confused with the
old deleted node pointer hanging around in the
maps, so detect this and flush out maps if it
occurs (ExpungeNode). The expunging operation
is expensive, however it never occurs during
a llvm-gcc bootstrap or anywhere in the nightly
testsuite. It occurs three times in "make check":
Alpha/illegal-element-type.ll,
PowerPC/illegal-element-type.ll and
X86/mmx-shift.ll. If expunging proves to be too
expensive then there are other more complicated
ways of solving the problem.
In the normal case this patch adds the overhead
of a few more map lookups, which is hopefully
negligable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52214 91177308-0d34-0410-b5e6-96231b3b80d8
of apint codegen failure is the DAG combiner doing
the wrong thing because it was comparing MVT's using
< rather than comparing the number of bits. Removing
the < method makes this mistake impossible to commit.
Instead, add helper methods for comparing bits and use
them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52098 91177308-0d34-0410-b5e6-96231b3b80d8
and better control the abstraction. Rename the type
to MVT. To update out-of-tree patches, the main
thing to do is to rename MVT::ValueType to MVT, and
rewrite expressions like MVT::getSizeInBits(VT) in
the form VT.getSizeInBits(). Use VT.getSimpleVT()
to extract a MVT::SimpleValueType for use in switch
statements (you will get an assert failure if VT is
an extended value type - these shouldn't exist after
type legalization).
This results in a small speedup of codegen and no
new testsuite failures (x86-64 linux).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52044 91177308-0d34-0410-b5e6-96231b3b80d8
and/or to handle more cases (such as this add-sitofp.ll testcase), and
port it to selectiondag's ComputeNumSignBits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51469 91177308-0d34-0410-b5e6-96231b3b80d8
several things that were neither in an anonymous namespace nor static
but not intended to be global.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51017 91177308-0d34-0410-b5e6-96231b3b80d8
memcpy/memset expansion. It was a bug for the SVOffset value
to be used in the actual address calculations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@50359 91177308-0d34-0410-b5e6-96231b3b80d8
ComputeMaskedBits knows about cttz, ctlz, and ctpop. Teach
SelectionDAG's ComputeMaskedBits what InstCombine's knows
about SRem. And teach them both some things about high bits
in Mul, UDiv, URem, and Sub. This allows instcombine and
dagcombine to eliminate sign-extension operations in
several new cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@50358 91177308-0d34-0410-b5e6-96231b3b80d8
Rename SDOperandImpl back to SDOperand.
Introduce the SDUse class that represents a use of the SDNode referred by
an SDOperand. Now it is more similar to Use/Value classes.
Patch is approved by Dan Gohman.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@49795 91177308-0d34-0410-b5e6-96231b3b80d8
on any current target and aren't optimized in DAGCombiner. Instead
of using intermediate nodes, expand the operations, choosing between
simple loads/stores, target-specific code, and library calls,
immediately.
Previously, the code to emit optimized code for these operations
was only used at initial SelectionDAG construction time; now it is
used at all times. This fixes some cases where rep;movs was being
used for small copies where simple loads/stores would be better.
This also cleans up code that checks for alignments less than 4;
let the targets make that decision instead of doing it in
target-independent code. This allows x86 to use rep;movs in
low-alignment cases.
Also, this fixes a bug that resulted in the use of rep;stos for
memsets of 0 with non-constant memory size when the alignment was
at least 4. It's better to use the library in this case, which
can be significantly faster when the size is large.
This also preserves more SourceValue information when memory
intrinsics are lowered into simple loads/stores.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@49572 91177308-0d34-0410-b5e6-96231b3b80d8
In order to handle indexed nodes I had to introduce
a new constructor, and since I was there I factorized
the code in the various load constructors.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@48894 91177308-0d34-0410-b5e6-96231b3b80d8
LLVM Value/Use does and MachineRegisterInfo/MachineOperand does.
This allows constant time for all uses list maintenance operations.
The idea was suggested by Chris. Reviewed by Evan and Dan.
Patch is tested and approved by Dan.
On normal use-cases compilation speed is not affected. On very big basic
blocks there are compilation speedups in the range of 15-20% or even better.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@48822 91177308-0d34-0410-b5e6-96231b3b80d8
flags. This is needed by the new legalize types
infrastructure which wants to expand the 64 bit
constants previously used to hold the flags on
32 bit machines. There are two functional changes:
(1) in LowerArguments, if a parameter has the zext
attribute set then that is marked in the flags;
before it was being ignored; (2) PPC had some bogus
code for handling two word arguments when using the
ELF 32 ABI, which was hard to convert because of
the bogusness. As suggested by the original author
(Nicolas Geoffray), I've disabled it for the moment.
Tested with "make check" and the Ada ACATS testsuite.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@48640 91177308-0d34-0410-b5e6-96231b3b80d8
getCopyToParts problem was noticed by the new
LegalizeTypes infrastructure. In order to avoid
this kind of thing in the future I've added a
check that EXTRACT_ELEMENT is only used with
integers. Once LegalizeTypes is up and running
most likely BUILD_PAIR and EXTRACT_ELEMENT can
be removed, in favour of using apints instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@48294 91177308-0d34-0410-b5e6-96231b3b80d8
_test3:
movd %rdi, %xmm1
#IMPLICIT_DEF %xmm0
punpcklqdq %xmm1, %xmm0
ret
instead of:
_test3:
#IMPLICIT_DEF %rax
movd %rax, %xmm0
movd %rdi, %xmm1
punpcklqdq %xmm1, %xmm0
ret
This is still not ideal. There is no reason to two xmm regs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@48058 91177308-0d34-0410-b5e6-96231b3b80d8
except ppc long double. This allows us to shrink constant pool
entries for x86 long double constants, which in turn allows us to
use flds/fldl instead of fldt.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@47938 91177308-0d34-0410-b5e6-96231b3b80d8
and splitting extract_subvector. This fixes nine
"make check" testcases, for example
2008-02-04-ExtractSubvector.ll and (partially)
CodeGen/Generic/vector.ll.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@47384 91177308-0d34-0410-b5e6-96231b3b80d8
AddNodeIDNode does profiling for a ConstantSDNode, but so does
SelectionDAG::getConstant. This profiling should be moved to a common
static function in ConstantSDNode.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@47359 91177308-0d34-0410-b5e6-96231b3b80d8
- X86 now normalize SCALAR_TO_VECTOR to (BIT_CONVERT (v4i32 SCALAR_TO_VECTOR)). Get rid of X86ISD::S2VEC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@47290 91177308-0d34-0410-b5e6-96231b3b80d8
