is just a trivial wrapper around "ClassifyGlobalReference", which
stole a ton of logic from LowerGlobalAddress.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75237 91177308-0d34-0410-b5e6-96231b3b80d8
ABI. The missing piece is support for putting "homogeneous aggregates"
into registers.
Patch by Sandeep Patel!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73095 91177308-0d34-0410-b5e6-96231b3b80d8
- added processors k8-sse3, opteron-sse3, athlon64-sse3, amdfam10, and
barcelona with appropriate sse3/4a levels
- added FeatureSSE4A for amdfam10 processors
in X86Subtarget:
- added hasSSE4A
- updated AutoDetectSubtargetFeatures to detect SSE4A
- updated GetCurrentX86CPU to detect family 15 with sse3 as k8-sse3 and
family 10h as amdfam10
New processor names match those used by gcc.
Patch by Paul Redmond!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72434 91177308-0d34-0410-b5e6-96231b3b80d8
and extern_weak_odr. These are the same as the non-odr versions,
except that they indicate that the global will only be overridden
by an *equivalent* global. In C, a function with weak linkage can
be overridden by a function which behaves completely differently.
This means that IP passes have to skip weak functions, since any
deductions made from the function definition might be wrong, since
the definition could be replaced by something completely different
at link time. This is not allowed in C++, thanks to the ODR
(One-Definition-Rule): if a function is replaced by another at
link-time, then the new function must be the same as the original
function. If a language knows that a function or other global can
only be overridden by an equivalent global, it can give it the
weak_odr linkage type, and the optimizers will understand that it
is alright to make deductions based on the function body. The
code generators on the other hand map weak and weak_odr linkage
to the same thing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66339 91177308-0d34-0410-b5e6-96231b3b80d8
is given, override the subtarget settings and enable 64-bit support.
This restores the earlier behavior, and fixes regressions on
Non-64-bit-capable x86-32 hosts.
This isn't necessarily the best approach, but the most obvious
alternative is to require -mcpu=x86-64 or -mattr=+64bit to be used
with -march=x86-64 when the host doesn't have 64-bit support. This
makes things little more consistent, but it's less convenient, and
it has the practical drawback of requiring lots of test changes, so
I opted for the above approach for now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63642 91177308-0d34-0410-b5e6-96231b3b80d8
SSE2, however it's possible to disable SSE2, and the subtarget support
code thinks that if 64-bit implies SSE2 and SSE2 is disabled then
64-bit should also be disabled. Instead, just mark all the 64-bit
subtargets as explicitly supporting SSE2.
Also, move the code that makes -march=x86-64 enable 64-bit support by
default to only apply when there is no explicit subtarget. If you
need to specify a subtarget and you want 64-bit code, you'll need to
select a subtarget that supports 64-bit code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63575 91177308-0d34-0410-b5e6-96231b3b80d8
loops when they can be subsumed into addressing modes.
Change X86 addressing mode check to realize that
some PIC references need an extra register.
(I believe this is correct for Linux, if not, I'm sure
someone will tell me.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60608 91177308-0d34-0410-b5e6-96231b3b80d8
instead of requiring all "short description" strings to begin with
two spaces. This makes these strings less mysterious, and it fixes
some cases where short description strings mistakenly did not
begin with two spaces.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57521 91177308-0d34-0410-b5e6-96231b3b80d8
`-fno-builtin' flag. Currently, it's used to replace "memset" with "_bzero"
instead of "__bzero" on Darwin10+. This arguably violates the meaning of this
flag, but is currently sufficient. The meaning of this flag should become more
specific over time.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56885 91177308-0d34-0410-b5e6-96231b3b80d8
are represented as "weak", but there are subtle differences
in some cases on Darwin, so we need both. The intent
is that "common" will behave identically to "weak" unless
somebody changes their target to do something else.
No functional change as yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51118 91177308-0d34-0410-b5e6-96231b3b80d8
several things that were neither in an anonymous namespace nor static
but not intended to be global.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51017 91177308-0d34-0410-b5e6-96231b3b80d8
the code being generated does not require an executable stack.
Also, add target-specific code to make use of this on Linux
on x86.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@50634 91177308-0d34-0410-b5e6-96231b3b80d8
on 64-bit builds. Analysis and original patch
by Török Edwin. Code audit found another place
with the same problem, also fixed here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45746 91177308-0d34-0410-b5e6-96231b3b80d8
Now both subtarget define getMaxInlineSizeThreshold and the expansion uses it.
This should not change generated code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43552 91177308-0d34-0410-b5e6-96231b3b80d8
replaced it with a FIXME should have determined what did work. Then he would have
realized that the code was in fact correct, and would have avoided breaking it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@36173 91177308-0d34-0410-b5e6-96231b3b80d8
1. New parameter attribute called 'inreg'. It has meaning "place this
parameter in registers, if possible". This is some generalization of
gcc's regparm(n) attribute. It's currently used only in X86-32 backend.
2. Completely rewritten CC handling/lowering code inside X86 backend.
Merged stdcall + c CCs and fastcall + fast CC.
3. Dropped CSRET CC. We cannot add struct return variant for each
target-specific CC (e.g. stdcall + csretcc and so on).
4. Instead of CSRET CC introduced 'sret' parameter attribute. Setting in
on first attribute has meaning 'This is hidden pointer to structure
return. Handle it gently'.
5. Fixed small bug in llvm-extract + add new feature to
FunctionExtraction pass, which relinks all internal-linkaged callees
from deleted function to external linkage. This will allow further
linking everything together.
NOTEs: 1. Documentation will be updated soon.
2. llvm-upgrade should be improved to translate csret => sret.
Before this, there will be some unexpected test fails.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@33597 91177308-0d34-0410-b5e6-96231b3b80d8
non-statics.
* Introduce new option to output zero-initialized data to .bss section.
This can reduce size of binaries. Enable it by default for ELF &
Cygwin/Mingw targets. Probably, Darwin should be also added.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@33299 91177308-0d34-0410-b5e6-96231b3b80d8
* PIC-aware internal structures in X86 Codegen have been refactored
* Visibility (default/weak) has been added
* Docs fixes (external weak linkage, visibility, formatting)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@33136 91177308-0d34-0410-b5e6-96231b3b80d8
- New target type "mingw" was introduced
- Same things for both mingw & cygwin are marked as "cygming" (as in
gcc)
- .lcomm is supported here, so allow LLVM to use it
- Correctly use underscored versions of setjmp & _longjmp for both mingw
& cygwin
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@32833 91177308-0d34-0410-b5e6-96231b3b80d8
host, it should be affected by the target. Allow the command line option to
override in either case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@30164 91177308-0d34-0410-b5e6-96231b3b80d8
