It enables to work with a smaller constant, which is target friendly for those which can compare to immediates.
It also avoids inserting a shift in favor of a trunc, which can be free on some targets.
This used to work until LLVM-3.1, but regressed with the 3.2 release.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175270 91177308-0d34-0410-b5e6-96231b3b80d8
Handle chains in which the same offset is used for both loads and
stores to the same array.
Fixes rdar://11410078.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174789 91177308-0d34-0410-b5e6-96231b3b80d8
isn't using the default calling convention. However, if the transformation is
from a call to inline IR, then the calling convention doesn't matter.
rdar://13157990
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174724 91177308-0d34-0410-b5e6-96231b3b80d8
In the loop vectorizer cost model, we used to ignore stores/loads of a pointer
type when computing the widest type within a loop. This meant that if we had
only stores/loads of pointers in a loop we would return a widest type of 8bits
(instead of 32 or 64 bit) and therefore a vector factor that was too big.
Now, if we see a consecutive store/load of pointers we use the size of a pointer
(from data layout).
This problem occured in SingleSource/Benchmarks/Shootout-C++/hash.cpp (reduced
test case is the first test in vector_ptr_load_store.ll).
radar://13139343
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174377 91177308-0d34-0410-b5e6-96231b3b80d8
The main lists of debug info metadata attached to the compile_unit had an extra
layer of metadata nodes they went through for no apparent reason. This patch
removes that (& still passes just as much of the GDB 7.5 test suite). If anyone
can show evidence as to why these extra metadata nodes are there I'm open to
reverting this patch & documenting why they're there.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174266 91177308-0d34-0410-b5e6-96231b3b80d8
Prepare it for vectors of pointers and handle simple cases. We don't handle
complicated cases because accumulateConstantOffset bails on pointer vectors.
Fixes selfhost on i386.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174179 91177308-0d34-0410-b5e6-96231b3b80d8
remaining use of AliasAnalysis concepts such as isIdentifiedObject to
prove pointer inequality.
@external_compare in test/Transforms/InstSimplify/compare.ll shows a simple
case where a noalias argument can be equal to a global variable address, and
while AliasAnalysis can get away with saying that these pointers don't alias,
instsimplify cannot say that they are not equal.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174122 91177308-0d34-0410-b5e6-96231b3b80d8
be equal, since there's nothing preventing a caller from correctly predicting
the stack location of an alloca.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174119 91177308-0d34-0410-b5e6-96231b3b80d8
The AttrBuilder is for building a collection of attributes. The Attribute object
holds only one attribute. So it's not really useful for the Attribute object to
have a creator which takes an AttrBuilder.
This has two fallouts:
1. The AttrBuilder no longer holds its internal attributes in a bit-mask form.
2. The attributes are now ordered alphabetically (hence why the tests have changed).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174110 91177308-0d34-0410-b5e6-96231b3b80d8
Changing ARMBaseTargetMachine to return ARMTargetLowering intead of
the generic one (similar to x86 code).
Tests showing which instructions were added to cast when necessary
or cost zero when not. Downcast to 16 bits are not lowered in NEON,
so costs are not there yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173849 91177308-0d34-0410-b5e6-96231b3b80d8
The AttributeSetNode contains all of the attributes. This removes one (hopefully
last) use of the Attribute class as a container of multiple attributes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173761 91177308-0d34-0410-b5e6-96231b3b80d8
These tests in particular try to use escaped square brackets as an
argument to grep, which is failing for me with native win32 python. It
appears the backslash is being lost near the CreateProcess*() call.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173506 91177308-0d34-0410-b5e6-96231b3b80d8
loops over instructions in the basic block or the use-def list of the
value, neither of which are really efficient when repeatedly querying
about values in the same basic block.
What's more, we already know that the CondBB is small, and so we can do
a much more efficient test by counting the uses in CondBB, and seeing if
those account for all of the uses.
Finally, we shouldn't blanket fail on any such instruction, instead we
should conservatively assume that those instructions are part of the
cost.
Note that this actually fixes a bug in the pass because
isUsedInBasicBlock has a really terrible bug in it. I'll fix that in my
next commit, but the fix for it would make this code suddenly take the
compile time hit I thought it already was taking, so I wanted to go
ahead and migrate this code to a faster & better pattern.
The bug in isUsedInBasicBlock was also causing other tests to test the
wrong thing entirely: for example we weren't actually disabling
speculation for floating point operations as intended (and tested), but
the test passed because we failed to speculate them due to the
isUsedInBasicBlock failure.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173417 91177308-0d34-0410-b5e6-96231b3b80d8
Original commit message:
Plug TTI into the speculation logic, giving it a real cost interface
that can be specialized by targets.
The goal here is not to be more aggressive, but to just be more accurate
with very obvious cases. There are instructions which are known to be
truly free and which were not being modeled as such in this code -- see
the regression test which is distilled from an inner loop of zlib.
Everywhere the TTI cost model is insufficiently conservative I've added
explicit checks with FIXME comments to go add proper modelling of these
cost factors.
If this causes regressions, the likely solution is to make TTI even more
conservative in its cost estimates, but test cases will help here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173357 91177308-0d34-0410-b5e6-96231b3b80d8
We use constant folding to see if an intrinsic evaluates to the same value as a
constant that we know. If we don't take the undefinedness into account we get a
value that doesn't match the actual implementation, and miscompiled code.
This was uncovered by Chandler's simplifycfg changes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173356 91177308-0d34-0410-b5e6-96231b3b80d8
that can be specialized by targets.
The goal here is not to be more aggressive, but to just be more accurate
with very obvious cases. There are instructions which are known to be
truly free and which were not being modeled as such in this code -- see
the regression test which is distilled from an inner loop of zlib.
Everywhere the TTI cost model is insufficiently conservative I've added
explicit checks with FIXME comments to go add proper modelling of these
cost factors.
If this causes regressions, the likely solution is to make TTI even more
conservative in its cost estimates, but test cases will help here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173342 91177308-0d34-0410-b5e6-96231b3b80d8
a cost fuction that seems both a bit ad-hoc and also poorly suited to
evaluating constant expressions.
Notably, it is missing any support for trivial expressions such as
'inttoptr'. I could fix this routine, but it isn't clear to me all of
the constraints its other users are operating under.
The core protection that seems relevant here is avoiding the formation
of a select instruction wich a further chain of select operations in
a constant expression operand. Just explicitly encode that constraint.
Also, update the comments and organization here to make it clear where
this needs to go -- this should be driven off of real cost measurements
which take into account the number of constants expressions and the
depth of the constant expression tree.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173340 91177308-0d34-0410-b5e6-96231b3b80d8
SSPStrong applies a heuristic to insert stack protectors in these situations:
* A Protector is required for functions which contain an array, regardless of
type or length.
* A Protector is required for functions which contain a structure/union which
contains an array, regardless of type or length. Note, there is no limit to
the depth of nesting.
* A protector is required when the address of a local variable (i.e., stack
based variable) is exposed. (E.g., such as through a local whose address is
taken as part of the RHS of an assignment or a local whose address is taken as
part of a function argument.)
This patch implements the SSPString attribute to be equivalent to
SSPRequired. This will change in a subsequent patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173230 91177308-0d34-0410-b5e6-96231b3b80d8
allows for gvn to perform certain optimizations. Thus the runline should
only contain -objc-arc-aa, not the full -objc-arc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173126 91177308-0d34-0410-b5e6-96231b3b80d8
We ignore the cpu frontend and focus on pipeline utilization. We do this because we
don't have a good way to estimate the loop body size at the IR level.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172964 91177308-0d34-0410-b5e6-96231b3b80d8
This separates the check for "too few elements to run the vector loop" from the
"memory overlap" check, giving a lot nicer code and allowing to skip the memory
checks when we're not going to execute the vector code anyways. We still leave
the decision of whether to emit the memory checks as branches or setccs, but it
seems to be doing a good job. If ugly code pops up we may want to emit them as
separate blocks too. Small speedup on MultiSource/Benchmarks/MallocBench/espresso.
Most of this is legwork to allow multiple bypass blocks while updating PHIs,
dominators and loop info.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172902 91177308-0d34-0410-b5e6-96231b3b80d8
Okay, here's how to reproduce the problem:
1) Build a Release (or Release+Asserts) version of clang in the normal way.
2) Using the clang & clang++ binaries from (1), build a Release (or
Release+Asserts) version of the same sources, but this time enable LTO ---
specify the `-flto' flag on the command line.
3) Run the ARC migrator tests:
$ arcmt-test --args -triple x86_64-apple-darwin10 -fsyntax-only -x objective-c++ ./src/tools/clang/test/ARCMT/cxx-rewrite.mm
You'll see that the output isn't correct (the whitespace is off).
The mis-compile is in the function `RewriteBuffer::RemoveText' in the
clang/lib/Rewrite/Core/Rewriter.cpp file. When that function and RewriteRope.cpp
are compiled with LTO and the `arcmt-test' executable is regenerated, you'll see
the error. When those files are not LTO'ed, then the output of the `arcmt-test'
is fine.
It is *really* hard to get a testcase out of this. I'll file a PR with what I
have currently.
--- Reverse-merging r172363 into '.':
U include/llvm/Analysis/MemoryBuiltins.h
U lib/Analysis/MemoryBuiltins.cpp
--- Reverse-merging r171325 into '.':
U test/Transforms/InstCombine/objsize.ll
G include/llvm/Analysis/MemoryBuiltins.h
G lib/Analysis/MemoryBuiltins.cpp
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172756 91177308-0d34-0410-b5e6-96231b3b80d8
some optimization opportunities (in the enclosing supper-expressions).
rule 1. (-0.0 - X ) * Y => -0.0 - (X * Y)
if expression "-0.0 - X" has only one reference.
rule 2. (0.0 - X ) * Y => -0.0 - (X * Y)
if expression "0.0 - X" has only one reference, and
the instruction is marked "noSignedZero".
2. Eliminate negation (The compiler was already able to handle these
opt if the 0.0s are replaced with -0.0.)
rule 3: (0.0 - X) * (0.0 - Y) => X * Y
rule 4: (0.0 - X) * C => X * -C
if the expr is flagged "noSignedZero".
3.
Rule 5: (X*Y) * X => (X*X) * Y
if X!=Y and the expression is flagged with "UnsafeAlgebra".
The purpose of this transformation is two-fold:
a) to form a power expression (of X).
b) potentially shorten the critical path: After transformation, the
latency of the instruction Y is amortized by the expression of X*X,
and therefore Y is in a "less critical" position compared to what it
was before the transformation.
4. Remove the InstCombine code about simplifiying "X * select".
The reasons are following:
a) The "select" is somewhat architecture-dependent, therefore the
higher level optimizers are not able to precisely predict if
the simplification really yields any performance improvement
or not.
b) The "select" operator is bit complicate, and tends to obscure
optimization opportunities. It is btter to keep it as low as
possible in expr tree, and let CodeGen to tackle the optimization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172551 91177308-0d34-0410-b5e6-96231b3b80d8
Test was failing for clang-native-arm-cortex-a9 build-bot configuration.
The reason for the failure was the test was using hardcoded names.
The attached patch fixes this failure by replacing the hard-coded variables
names with pattern-matched variable names.
Patch by Manish Verma, ARM
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172534 91177308-0d34-0410-b5e6-96231b3b80d8
---------------------------------------------------------------------------
C_A: reassociation is allowed
C_R: reciprocal of a constant C is appropriate, which means
- 1/C is exact, or
- reciprocal is allowed and 1/C is neither a special value nor a denormal.
-----------------------------------------------------------------------------
rule1: (X/C1) / C2 => X / (C2*C1) (if C_A)
=> X * (1/(C2*C1)) (if C_A && C_R)
rule 2: X*C1 / C2 => X * (C1/C2) if C_A
rule 3: (X/Y)/Z = > X/(Y*Z) (if C_A && at least one of Y and Z is symbolic value)
rule 4: Z/(X/Y) = > (Z*Y)/X (similar to rule3)
rule 5: C1/(X*C2) => (C1/C2) / X (if C_A)
rule 6: C1/(X/C2) => (C1*C2) / X (if C_A)
rule 7: C1/(C2/X) => (C1/C2) * X (if C_A)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172488 91177308-0d34-0410-b5e6-96231b3b80d8
Note that this bug is only exposed because LTO fails to use TTI.
Fixes self-LTO of clang. rdar://13007381.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172462 91177308-0d34-0410-b5e6-96231b3b80d8
The reason that this occurs is that tail calling objc_autorelease eventually
tail calls -[NSObject autorelease] which supports fast autorelease. This can
cause us to violate the semantic gaurantees of __autoreleasing variables that
assignment to an __autoreleasing variables always yields an object that is
placed into the innermost autorelease pool.
The fix included in this patch works by:
1. In the peephole optimization function OptimizeIndividualFunctions, always
remove tail call from objc_autorelease.
2. Whenever we convert to/from an objc_autorelease, set/unset the tail call
keyword as appropriate.
*NOTE* I also handled the case where objc_autorelease is converted in
OptimizeReturns to an autoreleaseRV which still violates the ARC semantics. I
will be removing that in a later patch and I wanted to make sure that the tree
is in a consistent state vis-a-vis ARC always.
Additionally some test cases are provided and all tests that have tail call marked
objc_autorelease keywords have been modified so that tail call has been removed.
*NOTE* One test fails due to a separate bug that I am going to commit soon. Thus
I marked the check line TMP: instead of CHECK: so make check does not fail.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172287 91177308-0d34-0410-b5e6-96231b3b80d8
the target if it supports the different CAST types. We didn't do this
on X86 because of the different register sizes and types, but on ARM
this makes sense.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172245 91177308-0d34-0410-b5e6-96231b3b80d8
We don't have a detailed analysis on which values are vectorized and which stay scalars in the vectorized loop so we use
another method. We look at reduction variables, loads and stores, which are the only ways to get information in and out
of loop iterations. If the data types are extended and truncated then the cost model will catch the cost of the vector
zext/sext/trunc operations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172178 91177308-0d34-0410-b5e6-96231b3b80d8
Messages:
Converted test case trivial_codegen_tailcall.ll to use FileCheck.
Converted test return_constant.ll to use FileCheck instead of grep.
Converted test reorder_load.ll to use FileCheck instead of grep.
Converted test intervening-inst.ll to use FileCheck instead of grep.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172171 91177308-0d34-0410-b5e6-96231b3b80d8
The root cause is mistakenly taking for granted that
"dyn_cast<Instruction>(a-Value)"
return a non-NULL instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172145 91177308-0d34-0410-b5e6-96231b3b80d8
- this expression is explicitly marked no-signed-zero, or
- no-signed-zero of this expression can be derived from some context.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171922 91177308-0d34-0410-b5e6-96231b3b80d8
small loops. On small loops post-loop that handles scalars (and runs slower) can take more time to execute than the
rest of the loop. This patch disables widening of loops with a small static trip count.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171798 91177308-0d34-0410-b5e6-96231b3b80d8
o. X/C1 * C2 => X * (C2/C1) (if C2/C1 is neither special FP nor denormal)
o. X/C1 * C2 -> X/(C1/C2) (if C2/C1 is either specical FP or denormal, but C1/C2 is a normal Fp)
Let MDC denote multiplication or dividion with one & only one operand being a constant
o. (MDC ± C1) * C2 => (MDC * C2) ± (C1 * C2)
(so long as the constant-folding doesn't yield any denormal or special value)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171793 91177308-0d34-0410-b5e6-96231b3b80d8
turning a code like this:
if (foo)
free(foo)
into that:
free(foo)
Move a call to free from basic block FB into FB's predecessor, P,
when the path from P to FB is taken only if the argument of free is
not equal to NULL.
Some restrictions apply on P and FB to be sure that this code motion
is profitable. Namely:
1. FB must have only one predecessor P.
2. FB must contain only the call to free plus an unconditional
branch to S.
3. P's successors are FB and S.
Because of 1., we will not increase the code size when moving the call
to free from FB to P.
Because of 2., FB will be empty after the move.
Because of 2. and 3., P's branch instruction becomes useless, so as FB
(simplifycfg will do the job).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171762 91177308-0d34-0410-b5e6-96231b3b80d8
TargetTransformInfo rather than TargetLowering, removing one of the
primary instances of the layering violation of Transforms depending
directly on Target.
This is a really big deal because LSR used to be a "special" pass that
could only be tested fully using llc and by looking at the full output
of it. It also couldn't run with any other loop passes because it had to
be created by the backend. No longer is this true. LSR is now just
a normal pass and we should probably lift the creation of LSR out of
lib/CodeGen/Passes.cpp and into the PassManagerBuilder. =] I've not done
this, or updated all of the tests to use opt and a triple, because
I suspect someone more familiar with LSR would do a better job. This
change should be essentially without functional impact for normal
compilations, and only change behvaior of targetless compilations.
The conversion required changing all of the LSR code to refer to the TTI
interfaces, which fortunately are very similar to TargetLowering's
interfaces. However, it also allowed us to *always* expect to have some
implementation around. I've pushed that simplification through the pass,
and leveraged it to simplify code somewhat. It required some test
updates for one of two things: either we used to skip some checks
altogether but now we get the default "no" answer for them, or we used
to have no information about the target and now we do have some.
I've also started the process of removing AddrMode, as the TTI interface
doesn't use it any longer. In some cases this simplifies code, and in
others it adds some complexity, but I think it's not a bad tradeoff even
there. Subsequent patches will try to clean this up even further and use
other (more appropriate) abstractions.
Yet again, almost all of the formatting changes brought to you by
clang-format. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171735 91177308-0d34-0410-b5e6-96231b3b80d8
bogus comparison operands to default to eq/oeq. Fix that, fix a couple of
tests that accidentally passed and test for bogus comparison opeartors
explicitly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171733 91177308-0d34-0410-b5e6-96231b3b80d8
This could be simplified further, but Hal has a specific feature for
ignoring TTI, and so I preserved that.
Also, I needed to use it because a number of tests fail when switching
from a null TTI to the NoTTI nonce implementation. That seems suspicious
to me and so may be something that you need to look into Hal. I worked
it by preserving the old behavior for these tests with the flag that
ignores all target info.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171722 91177308-0d34-0410-b5e6-96231b3b80d8
Since subtraction does not commute the loop vectorizer incorrectly vectorizes
reductions such as x = A[i] - x.
Disabling for now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171537 91177308-0d34-0410-b5e6-96231b3b80d8
reachablity.
We conservatively approximate the reachability analysis by saying it is not
reachable if there is a single path starting from "From" and the path does not
reach "To".
rdar://12801584
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171512 91177308-0d34-0410-b5e6-96231b3b80d8
1. Add code to estimate register pressure.
2. Add code to select the unroll factor based on register pressure.
3. Add bits to TargetTransformInfo to provide the number of registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171469 91177308-0d34-0410-b5e6-96231b3b80d8
This is done to avoid odd test failures, like the one fixed in r171243.
While there, FileCheck'ize tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171344 91177308-0d34-0410-b5e6-96231b3b80d8
This is done to avoid odd test failures, like the one fixed in r171243.
My previous regex was not good enough to find these.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171343 91177308-0d34-0410-b5e6-96231b3b80d8
LCSSA PHIs may have undef values. The vectorizer updates values that are used by outside users such as PHIs.
The bug happened because undefs are not loop values. This patch handles these PHIs.
PR14725
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171251 91177308-0d34-0410-b5e6-96231b3b80d8
propagating one of the values it simplified to a constant across
a myriad of instructions. Notably, ptrtoint instructions when we had
a constant pointer (say, 0) didn't propagate that, blocking a massive
number of down-stream optimizations.
This was uncovered when investigating why we fail to inline and delete
the boilerplate in:
void f() {
std::vector<int> v;
v.push_back(1);
}
It turns out most of the efforts I've made thus far to improve the
analysis weren't making it far purely because of this. After this is
fixed, the store-to-load forwarding patch enables LLVM to optimize the
above to an empty function. We still can't nuke a second push_back, but
for different reasons.
There is a very real chance this will cause somewhat noticable changes
in inlining behavior, so please let me know if you see regressions (or
improvements!) because of this patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171196 91177308-0d34-0410-b5e6-96231b3b80d8
how to propagate constants through insert and extract value
instructions.
With the recent improvements to instsimplify, this allows inline cost
analysis to constant fold through intrinsic functions, including notably
the with.overflow intrinsic math routines which often show up inside of
STL abstractions. This is yet another piece in the puzzle of breaking
down the code for:
void f() {
std::vector<int> v;
v.push_back(1);
}
But it still isn't enough. There are a pile of bugs in inline cost still
blocking this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171195 91177308-0d34-0410-b5e6-96231b3b80d8
constant folding calls. Add the initial tests for this which show that
now instsimplify can simplify blindingly obvious code patterns expressed
with both intrinsics and library calls.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171194 91177308-0d34-0410-b5e6-96231b3b80d8
For the time being this includes only some dummy test cases. Once the
generic implementation of the intrinsics cost function does something other
than assuming scalarization in all cases, or some target specializes the
interface, some real test cases can be added.
Also, for consistency, I changed the type of IID from unsigned to Intrinsic::ID
in a few other places.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171079 91177308-0d34-0410-b5e6-96231b3b80d8
the cost of arithmetic functions. We now assume that the cost of arithmetic
operations that are marked as Legal or Promote is low, but ops that are
marked as custom are higher.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171002 91177308-0d34-0410-b5e6-96231b3b80d8
memory bound checks. Before the fix we were able to vectorize this loop from
the Livermore Loops benchmark:
for ( k=1 ; k<n ; k++ )
x[k] = x[k-1] + y[k];
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170811 91177308-0d34-0410-b5e6-96231b3b80d8
Before if-conversion we could check if a value is loop invariant
if it was declared inside the basic block. Now that loops have
multiple blocks this check is incorrect.
This fixes External/SPEC/CINT95/099_go/099_go
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170756 91177308-0d34-0410-b5e6-96231b3b80d8
Similarly inlining of the function is inhibited, if that would duplicate the call (in particular inlining is still allowed when there is only one callsite and the function has internal linkage).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170704 91177308-0d34-0410-b5e6-96231b3b80d8
When the least bit of C is greater than V, (x&C) must be greater than V
if it is not zero, so the comparison can be simplified.
Although this was suggested in Target/X86/README.txt, it benefits any
architecture with a directly testable form of AND.
Patch by Kevin Schoedel
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170576 91177308-0d34-0410-b5e6-96231b3b80d8
- An MVT can become an EVT when being split (e.g. v2i8 -> v1i8, the latter doesn't exist)
- Return the scalar value when an MVT is scalarized (v1i64 -> i64)
Fixes PR14639ff.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170546 91177308-0d34-0410-b5e6-96231b3b80d8
This was a silly oversight, we weren't pruning allocas which were used
by variable-length memory intrinsics from the set that could be widened
and promoted as integers. Fix that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170353 91177308-0d34-0410-b5e6-96231b3b80d8
This also cleans up a bit of the memcpy call rewriting by sinking some
irrelevant code further down and making the call-emitting code a bit
more concrete.
Previously, memcpy of a subvector would actually miscompile (!!!) the
copy into a single vector element copy. I have no idea how this ever
worked. =/ This is the memcpy half of PR14478 which we probably weren't
noticing previously because it didn't actually assert.
The rewrite relies on the newly refactored insert- and extractVector
functions to do the heavy lifting, and those are the same as used for
loads and stores which makes the test coverage a bit more meaningful
here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170338 91177308-0d34-0410-b5e6-96231b3b80d8
The first half of fixing this bug was actually in r170328, but was
entirely coincidental. It did however get me to realize the nature of
the bug, and adapt the test case to test more interesting behavior. In
turn, that uncovered the rest of the bug which I've fixed here.
This should fix two new asserts that showed up in the vectorize nightly
tester.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170333 91177308-0d34-0410-b5e6-96231b3b80d8
PR14478 highlights a serious problem in SROA that simply wasn't being
exercised due to a lack of vector input code mixed with C-library
function calls. Part of SROA was written carefully to handle subvector
accesses via memset and memcpy, but the rewriter never grew support for
this. Fixing it required refactoring the subvector access code in other
parts of SROA so it could be shared, and then fixing the splat formation
logic and using subvector insertion (this patch).
The PR isn't quite fixed yet, as memcpy is still broken in the same way.
I'm starting on that series of patches now.
Hopefully this will be enough to bring the bullet benchmark back to life
with the bb-vectorizer enabled, but that may require fixing memcpy as
well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170301 91177308-0d34-0410-b5e6-96231b3b80d8
This assumes (1 << n) is always not zero. Consider n is greater than word size.
Although I know it is undefined, this transforms undefined behavior hidden.
This led clang unexpected behavior with some failures. I will investigate to fix undefined shl in clang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170128 91177308-0d34-0410-b5e6-96231b3b80d8
Better controls the inlining of functions when the caller function has MinSize attribute.
Basically, when the caller function has this attribute, we do not "force" the inlining
of callee functions carrying the InlineHint attribute (i.e., functions defined with
inline keyword)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170065 91177308-0d34-0410-b5e6-96231b3b80d8
fsub X, +0 ==> X
fsub X, -0 ==> X, when we know X is not -0
fsub +/-0.0, (fsub -0.0, X) ==> X
fsub nsz +/-0.0, (fsub +/-0.0, X) ==> X
fsub nnan ninf X, X ==> 0.0
fadd nsz X, 0 ==> X
fadd [nnan ninf] X, (fsub [nnan ninf] 0, X) ==> 0
where nnan and ninf have to occur at least once somewhere in this expression
fmul X, 1.0 ==> X
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169940 91177308-0d34-0410-b5e6-96231b3b80d8
When SROA was evaluating a mixture of i1 and i8 loads and stores, in
just a particular case, it would tickle a latent bug where we compared
bits to bytes rather than bits to bits. As a consequence of the latent
bug, we would allow integers through which were not byte-size multiples,
a situation the later rewriting code was never intended to handle.
In release builds this could trigger all manner of oddities, but the
reported issue in PR14548 was forming invalid bitcast instructions.
The only downside of this fix is that it makes it more clear that SROA
in its current form is not capable of handling mixed i1 and i8 loads and
stores. Sometimes with the previous code this would work by luck, but
usually it would crash, so I'm not terribly worried. I'll watch the LNT
numbers just to be sure.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169719 91177308-0d34-0410-b5e6-96231b3b80d8
- added function to VectorTargetTransformInfo to query cost of intrinsics
- vectorize trivially vectorizable intrinsic calls such as sin, cos, log, etc.
Reviewed by: Nadav
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169711 91177308-0d34-0410-b5e6-96231b3b80d8
There are still bugs in this pass, as well as other issues that are
being worked on, but the bugs are crashers that occur pretty easily in
the wild. Test cases have been sent to the original commit's review
thread.
This reverts the commits:
r169671: Fix a logic error.
r169604: Move the popcnt tests to an X86 subdirectory.
r168931: Initial commit adding the pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169683 91177308-0d34-0410-b5e6-96231b3b80d8
Buildbots for some hosts may choose to build only their own backend in order to
maximise testing-turnaround time. Move the test into a prefixed directory so
lit's standard "backend specific" suppression can be done.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169604 91177308-0d34-0410-b5e6-96231b3b80d8
by virtue of inbounds GEPs that preclude a null pointer.
This is a very common pattern in the code generated by std::vector and
other standard library routines which use allocators that test for null
pervasively. This is one step closer to teaching Clang+LLVM to be able
to produce an empty function for:
void f() {
std::vector<int> v;
v.push_back(1);
v.push_back(2);
v.push_back(3);
v.push_back(4);
}
Which is related to getting them to completely fold SmallVector
push_back sequences into constants when inlining and other optimizations
make that a possibility.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169573 91177308-0d34-0410-b5e6-96231b3b80d8
reduction variable is not used outside the loop then we ran into an
endless loop. This change checks if we found the original PHI.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169324 91177308-0d34-0410-b5e6-96231b3b80d8
This change attempts to simplify (X^Y) -> X or Y in the user's context if we know that
only bits from X or Y are demanded.
A minimized case is provided bellow. This change will simplify "t>>16" into "var1 >>16".
=============================================================
unsigned foo (unsigned val1, unsigned val2) {
unsigned t = val1 ^ 1234;
return (t >> 16) | t; // NOTE: t is used more than once.
}
=============================================================
Note that if the "t" were used only once, the expression would be finally optimized as well.
However, with with this change, the optimization will take place earlier.
Reviewed by Nadav, Thanks a lot!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169317 91177308-0d34-0410-b5e6-96231b3b80d8
Added the code that actually performs the if-conversion during vectorization.
We can now vectorize this code:
for (int i=0; i<n; ++i) {
unsigned k = 0;
if (a[i] > b[i]) <------ IF inside the loop.
k = k * 5 + 3;
a[i] = k; <---- K is a phi node that becomes vector-select.
}
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169217 91177308-0d34-0410-b5e6-96231b3b80d8
The type of shirt-right (logical or arithemetic) should remain unchanged
when transforming "X << C1 >> C2" into "X << (C1-C2)"
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169209 91177308-0d34-0410-b5e6-96231b3b80d8
Also check in a case to repeat the issue, on which 'opt -globalopt' consumes 1.6GB memory.
The big memory footprint cause is that current GlobalOpt one by one hoists and stores the leaf element constant into the global array, in each iteration, it recreates the global array initializer constant and leave the old initializer alone. This may result in many obsolete constants left.
For example: we have global array @rom = global [16 x i32] zeroinitializer
After the first element value is hoisted and installed: @rom = global [16 x i32] [ 1, 0, 0, ... ]
After the second element value is installed: @rom = global [16 x 32] [ 1, 2, 0, 0, ... ] // here the previous initializer is obsolete
...
When the transform is done, we have 15 obsolete initializers left useless.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169079 91177308-0d34-0410-b5e6-96231b3b80d8
the tables cannot fit in registers (i.e. bitmap), do not emit the table
if it's using an illegal type.
rdar://12779436
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168970 91177308-0d34-0410-b5e6-96231b3b80d8
This revision attempts to recognize following population-count pattern:
while(a) { c++; ... ; a &= a - 1; ... },
where <c> and <a>could be used multiple times in the loop body.
TODO: On X8664 and ARM, __buildin_ctpop() are not expanded to a efficent
instruction sequence, which need to be improved in the following commits.
Reviewed by Nadav, really appreciate!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168931 91177308-0d34-0410-b5e6-96231b3b80d8
This patch migrates the puts optimizations from the simplify-libcalls
pass into the instcombine library call simplifier.
All the simplifiers from simplify-libcalls have now been migrated to
instcombine. Yay! Just a few other bits to migrate (prototype attribute
inference and a few statistics) and simplify-libcalls can finally be put
to rest.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168925 91177308-0d34-0410-b5e6-96231b3b80d8
This patch migrates the fputs optimizations from the simplify-libcalls
pass into the instcombine library call simplifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168893 91177308-0d34-0410-b5e6-96231b3b80d8
This patch migrates the fwrite optimizations from the simplify-libcalls
pass into the instcombine library call simplifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168892 91177308-0d34-0410-b5e6-96231b3b80d8
This patch migrates the fprintf optimizations from the simplify-libcalls
pass into the instcombine library call simplifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168891 91177308-0d34-0410-b5e6-96231b3b80d8
Accordingly, update a testcase with a broken datalayout string.
Also, we never parse negative numbers, because '-' is used as a
separator. Therefore, use unsigned as result type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168785 91177308-0d34-0410-b5e6-96231b3b80d8
When two instructions are combined into a vector instruction,
the resulting instruction must have the most-conservative flags.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168765 91177308-0d34-0410-b5e6-96231b3b80d8
My commit to migrate the printf simplifiers from the simplify-libcalls
in r168604 introduced a regression reported by Duncan [1]. The problem
is that in some cases the library call simplifier can return a new value
that has no uses and the new value's type is different than the old value's
type (which is fine because there are no uses). The specific case that
triggered the bug looked something like:
declare void @printf(i8*, ...)
...
call void (i8*, ...)* @printf(i8* %fmt)
Which we want to optimized into:
call i32 @putchar(i32 104)
However, the code was attempting to replace all uses of the printf with
the putchar and the types differ, hence a crash. This is fixed by *just*
deleting the original instruction when there are no uses. The old
simplify-libcalls pass is already doing something similar.
[1] http://lists.cs.uiuc.edu/pipermail/llvmdev/2012-November/056338.html
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168716 91177308-0d34-0410-b5e6-96231b3b80d8
This patch migrates the sprintf optimizations from the simplify-libcalls
pass into the instcombine library call simplifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168677 91177308-0d34-0410-b5e6-96231b3b80d8
InstCombineLoadStoreAlloca.cpp, which had many issues.
(At least two bugs were noted on llvm-commits, and it was overly conservative.)
Instead, use getOrEnforceKnownAlignment.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168629 91177308-0d34-0410-b5e6-96231b3b80d8
Enhancement to InstCombine. Try to catch this opportunity:
---------------------------------------------------------------
((X^C1) >> C2) ^ C3 => (X>>C2) ^ ((C1>>C2)^C3)
where the subexpression "X ^ C1" has more than one uses, and
"(X^C1) >> C2" has single use.
----------------------------------------------------------------
Reviewed by Nadav (with minor change per his request).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168615 91177308-0d34-0410-b5e6-96231b3b80d8
This patch migrates the printf optimizations from the simplify-libcalls
pass into the instcombine library call simplifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168604 91177308-0d34-0410-b5e6-96231b3b80d8
This patch migrates the toascii optimizations from the simplify-libcalls
pass into the instcombine library call simplifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168580 91177308-0d34-0410-b5e6-96231b3b80d8
This patch migrates the isascii optimizations from the simplify-libcalls
pass into the instcombine library call simplifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168579 91177308-0d34-0410-b5e6-96231b3b80d8
This patch migrates the isdigit optimizations from the simplify-libcalls
pass into the instcombine library call simplifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168578 91177308-0d34-0410-b5e6-96231b3b80d8
This patch migrates the *abs optimizations from the simplify-libcalls
pass into the instcombine library call simplifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168574 91177308-0d34-0410-b5e6-96231b3b80d8
This patch migrates the ffs* optimizations from the simplify-libcalls
pass into the instcombine library call simplifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168571 91177308-0d34-0410-b5e6-96231b3b80d8
I discovered a few more missing functions while migrating optimizations
from the simplify-libcalls pass to the instcombine (I already added some
in r167659).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168501 91177308-0d34-0410-b5e6-96231b3b80d8
"not grep '-715827882'" performed as below...bad...
Usage: grep [OPTION]... PATTERN [FILE]...
Try `grep --help' for more information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168430 91177308-0d34-0410-b5e6-96231b3b80d8
Now if we can transform an alloca into a single vector value, but it has
subvector, non-element accesses, we form the appropriate shufflevectors
to allow SROA to proceed. This fixes PR14055 which pointed out a very
common pattern that SROA couldn't handle -- mixed vec3 and vec4
operations on a single alloca.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168418 91177308-0d34-0410-b5e6-96231b3b80d8
The issue is that we may end up with newly OOB loads when speculating
a load into the predecessors of a PHI node, and this confuses the new
integer splitting logic in some cases, triggering an assertion failure.
In fact, the branch in question must be dead code as it loads from
a too-narrow alloca. Add code to handle this gracefully and leave the
requisite FIXMEs for both optimizing more aggressively and doing more to
aid sanitizing invalid code which triggers these patterns.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168361 91177308-0d34-0410-b5e6-96231b3b80d8
to properly handle the combinations of these with split integer loads
and stores. This essentially replaces Evan's r168227 by refactoring the
code in a different way, and trynig to mirror that refactoring in both
the load and store sides of the rewriting.
Generally speaking there was some really problematic duplicated code
here that led to poorly founded assumptions and then subtle bugs. Now
much of the code actually flows through and follows a more consistent
style and logical path. There is still a tiny bit of duplication on the
store side of things, but it is much less bad.
This also changes the logic to never re-use a load or store instruction
as that was simply too error prone in practice.
I've added a few tests (one a reduction of the one in Evan's original
patch, which happened to be the same as the report in PR14349). I'm
going to look at adding a few more tests for things I found and fixed in
passing (such as the volatile tests in the vectorizable predicate).
This patch has survived bootstrap, and modulo one bugfix survived
Duncan's test suite, but let me know if anything else explodes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168346 91177308-0d34-0410-b5e6-96231b3b80d8
operands of the expression being written was wrongly thought to be reusable as
an inner node of the expression resulting in it turning up as both an inner node
*and* a leaf, creating a cycle in the def-use graph. This would have caused the
verifier to blow up if things had gotten that far, however it managed to provoke
an infinite loop first.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168291 91177308-0d34-0410-b5e6-96231b3b80d8
replaced by this patch is equivalent to the new logic, but you'd be wrong, and
that's exactly where the bug was. There's a similar bug in instsimplify which
manifests itself as instsimplify failing to simplify this, rather than doing it
wrong, see next commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168181 91177308-0d34-0410-b5e6-96231b3b80d8
It turns out that the operands of a Constant are not always themselves
Constant. For example, one of the operands of BlockAddress is
BasicBlock, which is not a Constant.
This should fix the dragonegg-x86_64-linux-gcc-4.6-test build which
broke in r168037.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168147 91177308-0d34-0410-b5e6-96231b3b80d8
For global variables that get the same value stored into them
everywhere, GlobalOpt will replace them with a constant. The problem is
that a thread-local GlobalVariable looks like one value (the address of
the TLS var), but is different between threads.
This patch introduces Constant::isThreadDependent() which returns true
for thread-local variables and constants which depend on them (e.g. a GEP
into a thread-local array), and teaches GlobalOpt not to track such
values.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168037 91177308-0d34-0410-b5e6-96231b3b80d8
the utility for extracting a chain of operations from the IR, thought that it
might as well combine any constants it came across (rather than just returning
them along with everything else). On the other hand, the factorization code
would like to see the individual constants (this is quite reasonable: it is
much easier to pull a factor of 3 out of 2*3 than it is to pull it out of 6;
you may think 6/3 isn't so hard, but due to overflow it's not as easy to undo
multiplications of constants as it may at first appear). This patch therefore
makes LinearizeExprTree stupider: it now leaves optimizing to the optimization
part of reassociate, and sticks to just analysing the IR.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168035 91177308-0d34-0410-b5e6-96231b3b80d8
Previously in a vector of pointers, the pointer couldn't be any pointer type,
it had to be a pointer to an integer or floating point type. This is a hassle
for dragonegg because the GCC vectorizer happily produces vectors of pointers
where the pointer is a pointer to a struct or whatever. Vector getelementptr
was restricted to just one index, but now that vectors of pointers can have
any pointer type it is more natural to allow arbitrary vector getelementptrs.
There is however the issue of struct GEPs, where if each lane chose different
struct fields then from that point on each lane will be working down into
unrelated types. This seems like too much pain for too little gain, so when
you have a vector struct index all the elements are required to be the same.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167828 91177308-0d34-0410-b5e6-96231b3b80d8
This patch migrates the math library call simplifications from the
simplify-libcalls pass into the instcombine library call simplifier.
I have typically migrated just one simplifier at a time, but the math
simplifiers are interdependent because:
1. CosOpt, PowOpt, and Exp2Opt all depend on UnaryDoubleFPOpt.
2. CosOpt, PowOpt, Exp2Opt, and UnaryDoubleFPOpt all depend on
the option -enable-double-float-shrink.
These two factors made migrating each of these simplifiers individually
more of a pain than it would be worth. So, I migrated them all together.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167815 91177308-0d34-0410-b5e6-96231b3b80d8
Don't choose a vectorization plan containing only shuffles and
vector inserts/extracts. Due to inperfections in the cost model,
these can lead to infinite recusion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167811 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes another infinite recursion case when using target costs.
We can only replace insert element input chains that are pure (end
with inserting into an undef).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167784 91177308-0d34-0410-b5e6-96231b3b80d8
The old checking code, which assumed that input shuffles and insert-elements
could always be folded (and thus were free) is too simple.
This can only happen in special circumstances.
Using the simple check caused infinite recursion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167750 91177308-0d34-0410-b5e6-96231b3b80d8
The pass would previously assert when trying to compute the cost of
compare instructions with illegal vector types (like struct pointers).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167743 91177308-0d34-0410-b5e6-96231b3b80d8
The assertion is trigged when the Reassociater tries to transform expression
... + 2 * n * 3 + 2 * m + ...
into:
... + 2 * (n*3 + m).
In the process of the transformation, a helper routine folds the constant 2*3 into 6,
confusing optimizer which is trying the to eliminate the common factor 2, and cannot
find 2 any more.
Review is pending. But I'd like commit first in order to help those who are waiting
for this fix.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167740 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes a bug where shuffles were being fused such that the
resulting input types were not legal on the target. This would
occur only when both inputs and dependencies were also foldable
operations (such as other shuffles) and there were other connected
pairs in the same block.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167731 91177308-0d34-0410-b5e6-96231b3b80d8
The library call simplifier folds memcmp calls with all constant arguments
to a constant. For example:
memcmp("foo", "foo", 3) -> 0
memcmp("hel", "foo", 3) -> 1
memcmp("foo", "hel", 3) -> -1
The folding is implemented in terms of the system memcmp that LLVM gets
linked with. It currently just blindly uses the value returned from
the system memcmp as the folded constant.
This patch normalizes the values returned from the system memcmp to
(-1, 0, 1) so that we get consistent results across multiple platforms.
The test cases were adjusted accordingly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167726 91177308-0d34-0410-b5e6-96231b3b80d8
Transforms/InstCombine/memcmp-1.ll has a test case that looks like:
@foo = constant [4 x i8] c"foo\00"
@hel = constant [4 x i8] c"hel\00"
...
%mem1 = getelementptr [4 x i8]* @hel, i32 0, i32 0
%mem2 = getelementptr [4 x i8]* @foo, i32 0, i32 0
%ret = call i32 @memcmp(i8* %mem1, i8* %mem2, i32 3)
ret i32 %ret
; CHECK: ret i32 2
The folded return value (2 above) is computed using the system memcmp
that the compiler is linked with. This can return different values on
different systems. The test was originally written on an OS X 10.7.5
x86-64 box and passed. However, it failed on one of the x86-64 FreeBSD
buildbots because the system memcpy on that machine returned a different
value (1 instead of 2).
I fixed the test by checking the folding constants with regexes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167691 91177308-0d34-0410-b5e6-96231b3b80d8
