The failure seen on win32, when i64 type is illegal.
It happens on stage of conversion VECTOR_SHUFFLE to BUILD_VECTOR.
The failure message is:
llc: SelectionDAG.cpp:784: void VerifyNodeCommon(llvm::SDNode*): Assertion `(I->getValueType() == EltVT || (EltVT.isInteger() && I->getValueType().isInteger() && EltVT.bitsLE(I->getValueType()))) && "Wrong operand type!"' failed.
I added a special test that checks vector shuffle on win32.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147445 91177308-0d34-0410-b5e6-96231b3b80d8
The failure seen on win32, when i64 type is illegal.
It happens on stage of conversion VECTOR_SHUFFLE to BUILD_VECTOR.
The failure message is:
llc: SelectionDAG.cpp:784: void VerifyNodeCommon(llvm::SDNode*): Assertion `(I->getValueType() == EltVT || (EltVT.isInteger() && I->getValueType().isInteger() && EltVT.bitsLE(I->getValueType()))) && "Wrong operand type!"' failed.
I added a special test that checks vector shuffle on win32.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147399 91177308-0d34-0410-b5e6-96231b3b80d8
1. The ST*UX instructions that store and update the stack pointer did not set define/kill on R1. This became a problem when I activated post-RA scheduling (and had incorrectly adjusted the Frames-large test).
2. eliminateFrameIndex did not kill its scavenged temporary register, and this could cause the scavenger to exhaust all available registers (and its emergency spill slot) when there were a lot of CR values to spill. The 2010-02-12-saveCR test has been adjusted to check for this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147359 91177308-0d34-0410-b5e6-96231b3b80d8
captured. This allows the tracker to look at the specific use, which may be
especially interesting for function calls.
Use this to fix 'nocapture' deduction in FunctionAttrs. The existing one does
not iterate until a fixpoint and does not guarantee that it produces the same
result regardless of iteration order. The new implementation builds up a graph
of how arguments are passed from function to function, and uses a bottom-up walk
on the argument-SCCs to assign nocapture. This gets us nocapture more often, and
does so rather efficiently and independent of iteration order.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147327 91177308-0d34-0410-b5e6-96231b3b80d8
Promotion of the mask operand needs to be done using PromoteTargetBoolean, and not padded with garbage.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147309 91177308-0d34-0410-b5e6-96231b3b80d8
Matching MOVLP mask for AVX (265-bit vectors) was wrong.
The failure was detected by conformance tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147308 91177308-0d34-0410-b5e6-96231b3b80d8
This was intended to undo the sub canonicalization in cases where it's not profitable, but it also
finds some cases on it's own.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147256 91177308-0d34-0410-b5e6-96231b3b80d8
unsigned foo(unsigned x) { return 31 - __builtin_clz(x); }
now compiles into a single "bsrl" instruction on x86.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147255 91177308-0d34-0410-b5e6-96231b3b80d8
This has the obvious advantage of being commutable and is always a win on x86 because
const - x wastes a register there. On less weird architectures this may lead to
a regression because other arithmetic doesn't fuse with it anymore. I'll address that
problem in a followup.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147254 91177308-0d34-0410-b5e6-96231b3b80d8
LZCNT instructions are available. Force promotion to i32 to get
a smaller encoding since the fix-ups necessary are just as complex for
either promoted type
We can't do standard promotion for CTLZ when lowering through BSR
because it results in poor code surrounding the 'xor' at the end of this
instruction. Essentially, if we promote the entire CTLZ node to i32, we
end up doing the xor on a 32-bit CTLZ implementation, and then
subtracting appropriately to get back to an i8 value. Instead, our
custom logic just uses the knowledge of the incoming size to compute
a perfect xor. I'd love to know of a way to fix this, but so far I'm
drawing a blank. I suspect the legalizer could be more clever and/or it
could collude with the DAG combiner, but how... ;]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147251 91177308-0d34-0410-b5e6-96231b3b80d8
my C-brain happy. Remove the unnecessary bits of pedantic IR fluff like
nounwind. Remove stray uses comments. Name things semantically rather
than tN so that adding a new test in the middle doesn't cause pain, and
so that new tests can be grouped semantically.
This exposes how little systematic testing is going on here. I noticed
this by finding several bugs via inspection and wondering why this test
wasn't catching any of them. =[
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147248 91177308-0d34-0410-b5e6-96231b3b80d8
'bsf' instructions here.
This one is actually debatable to my eyes. It's not clear that any chip
implementing 'tzcnt' would have a slow 'bsf' for any reason, and unless
EFLAGS or a zero input matters, 'tzcnt' is just a longer encoding.
Still, this restores the old behavior with 'tzcnt' enabled for now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147246 91177308-0d34-0410-b5e6-96231b3b80d8
X86ISelLowering C++ code. Because this is lowered via an xor wrapped
around a bsr, we want the dagcombine which runs after isel lowering to
have a chance to clean things up. In particular, it is very common to
see code which looks like:
(sizeof(x)*8 - 1) ^ __builtin_clz(x)
Which is trying to compute the most significant bit of 'x'. That's
actually the value computed directly by the 'bsr' instruction, but if we
match it too late, we'll get completely redundant xor instructions.
The more naive code for the above (subtracting rather than using an xor)
still isn't handled correctly due to the dagcombine getting confused.
Also, while here fix an issue spotted by inspection: we should have been
expanding the zero-undef variants to the normal variants when there is
an 'lzcnt' instruction. Do so, and test for this. We don't want to
generate unnecessary 'bsr' instructions.
These two changes fix some regressions in encoding and decoding
benchmarks. However, there is still a *lot* to be improve on in this
type of code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147244 91177308-0d34-0410-b5e6-96231b3b80d8
ARM targets with NEON units have access to aligned vector loads and
stores that are potentially faster than unaligned operations.
Add support for spilling the callee-saved NEON registers to an aligned
stack area using 16-byte aligned NEON loads and store.
This feature is off by default, controlled by an -align-neon-spills
command line option.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147211 91177308-0d34-0410-b5e6-96231b3b80d8
time regressions. In general, it is beneficial to compile-time.
Original commit message:
Fix for bug #11429: Wrong behaviour for switches. Small improvement for code
size heuristics.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147175 91177308-0d34-0410-b5e6-96231b3b80d8
