When a new SM architecture is introduced, it is only supported by the
current PTX version and later. Make sure we are using at least the
minimum PTX version for the target architecture.
This also removes support for PTX ISA < 3.2.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233583 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
CUDA 7.0's libdevice uses slightly different IR to call __nvvm_reflect
and that triggers an assertion in nvvm_reflect optimization pass. This
change allows nvvm_reflect pass to deal with both old and new ways to
pass an argument to __nvvm_reflect.
Test Plan: ninja check-all
Reviewers: eliben, echristo
Subscribers: jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D8399
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232732 91177308-0d34-0410-b5e6-96231b3b80d8
Similar to gep (r230786) and load (r230794) changes.
Similar migration script can be used to update test cases, which
successfully migrated all of LLVM and Polly, but about 4 test cases
needed manually changes in Clang.
(this script will read the contents of stdin and massage it into stdout
- wrap it in the 'apply.sh' script shown in previous commits + xargs to
apply it over a large set of test cases)
import fileinput
import sys
import re
rep = re.compile(r"(getelementptr(?:\s+inbounds)?\s*\()((<\d*\s+x\s+)?([^@]*?)(|\s*addrspace\(\d+\))\s*\*(?(3)>)\s*)(?=$|%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|zeroinitializer|<|\[\[[a-zA-Z]|\{\{)", re.MULTILINE | re.DOTALL)
def conv(match):
line = match.group(1)
line += match.group(4)
line += ", "
line += match.group(2)
return line
line = sys.stdin.read()
off = 0
for match in re.finditer(rep, line):
sys.stdout.write(line[off:match.start()])
sys.stdout.write(conv(match))
off = match.end()
sys.stdout.write(line[off:])
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232184 91177308-0d34-0410-b5e6-96231b3b80d8
Essentially the same as the GEP change in r230786.
A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)
import fileinput
import sys
import re
pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")
for line in sys.stdin:
sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7649
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230794 91177308-0d34-0410-b5e6-96231b3b80d8
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.
This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.
* This doesn't modify gep operators, only instructions (operators will be
handled separately)
* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.
* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.
* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x
Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.
update.py:
import fileinput
import sys
import re
ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line
for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)
apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done
The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh
After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).
The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7636
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230786 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
CUDA driver can unroll loops when jit-compiling PTX. To prevent CUDA
driver from unrolling a loop marked with llvm.loop.unroll.disable is not
unrolled by CUDA driver, we need to emit .pragma "nounroll" at the
header of that loop.
This patch also extracts getting unroll metadata from loop ID metadata
into a shared helper function.
Test Plan: test/CodeGen/NVPTX/nounroll.ll
Reviewers: eliben, meheff, jholewinski
Reviewed By: jholewinski
Subscribers: jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D7041
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227703 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of creating a pattern like "(p && a) || ((!p) && b)",
just expand the i8 operands to i32 and perform the selp on them.
Fixes PR22246
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227123 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
With isSingleValueType starting to treat vector types as single-value types,
code that uses this interface needs to be updated.
Test Plan:
vector-global.ll
nvcl-param-align.ll
Reviewers: jholewinski
Reviewed By: jholewinski
Subscribers: llvm-commits, meheff, eliben, jholewinski
Differential Revision: http://reviews.llvm.org/D6573
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224440 91177308-0d34-0410-b5e6-96231b3b80d8
Now that `Metadata` is typeless, reflect that in the assembly. These
are the matching assembly changes for the metadata/value split in
r223802.
- Only use the `metadata` type when referencing metadata from a call
intrinsic -- i.e., only when it's used as a `Value`.
- Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode`
when referencing it from call intrinsics.
So, assembly like this:
define @foo(i32 %v) {
call void @llvm.foo(metadata !{i32 %v}, metadata !0)
call void @llvm.foo(metadata !{i32 7}, metadata !0)
call void @llvm.foo(metadata !1, metadata !0)
call void @llvm.foo(metadata !3, metadata !0)
call void @llvm.foo(metadata !{metadata !3}, metadata !0)
ret void, !bar !2
}
!0 = metadata !{metadata !2}
!1 = metadata !{i32* @global}
!2 = metadata !{metadata !3}
!3 = metadata !{}
turns into this:
define @foo(i32 %v) {
call void @llvm.foo(metadata i32 %v, metadata !0)
call void @llvm.foo(metadata i32 7, metadata !0)
call void @llvm.foo(metadata i32* @global, metadata !0)
call void @llvm.foo(metadata !3, metadata !0)
call void @llvm.foo(metadata !{!3}, metadata !0)
ret void, !bar !2
}
!0 = !{!2}
!1 = !{i32* @global}
!2 = !{!3}
!3 = !{}
I wrote an upgrade script that handled almost all of the tests in llvm
and many of the tests in cfe (even handling many `CHECK` lines). I've
attached it (or will attach it in a moment if you're speedy) to PR21532
to help everyone update their out-of-tree testcases.
This is part of PR21532.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224257 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
".weak" symbols cannot be consumed by ptxas (PR21685). This patch makes the
weak directive in MCAsmPrinter customizable, and disables emitting ".weak"
symbols for NVPTX.
Test Plan: weak-linkage.ll
Reviewers: jholewinski
Reviewed By: jholewinski
Subscribers: majnemer, jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D6455
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223077 91177308-0d34-0410-b5e6-96231b3b80d8
This works around the limitation that PTX does not allow .param space
loads/stores with arbitrary pointers.
If a function has a by-val struct ptr arg, say foo(%struct.x *byval %d), then
add the following instructions to the first basic block :
%temp = alloca %struct.x, align 8
%tt1 = bitcast %struct.x * %d to i8 *
%tt2 = llvm.nvvm.cvt.gen.to.param %tt2
%tempd = bitcast i8 addrspace(101) * to %struct.x addrspace(101) *
%tv = load %struct.x addrspace(101) * %tempd
store %struct.x %tv, %struct.x * %temp, align 8
The above code allocates some space in the stack and copies the incoming
struct from param space to local space. Then replace all occurences of %d
by %temp.
Fixes PR21465.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221377 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Fixes PR21100 which is caused by inconsistency between the declared return type
and the expected return type at the call site. The new behavior is consistent
with nvcc and the NVPTXTargetLowering::getPrototype function.
Test Plan: test/Codegen/NVPTX/vector-return.ll
Reviewers: jholewinski
Reviewed By: jholewinski
Subscribers: llvm-commits, meheff, eliben, jholewinski
Differential Revision: http://reviews.llvm.org/D5612
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220607 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Fixes a FIXME in MachineSinking. Instead of using the simple heuristics in
isPostDominatedBy, use the real MachinePostDominatorTree and MachineLoopInfo.
The old heuristics caused instructions to sink unnecessarily, and might create
register pressure.
This is the second try of the fix. The first one (D4814) caused a performance
regression due to failing to sink instructions out of loops (PR21115). This
patch fixes PR21115 by sinking an instruction from a deeper loop to a shallower
one regardless of whether the target block post-dominates the source.
Thanks Alexey Volkov for reporting PR21115!
Test Plan:
Added a NVPTX codegen test to verify that our change prevents the backend from
over-sinking. It also shows the unnecessary register pressure caused by
over-sinking.
Added an X86 test to verify we can sink instructions out of loops regardless of
the dominance relationship. This test is reduced from Alexey's test in PR21115.
Updated an affected test in X86.
Also ran SPEC CINT2006 and llvm-test-suite for compilation time and runtime
performance. Results are attached separately in the review thread.
Reviewers: Jiangning, resistor, hfinkel
Reviewed By: hfinkel
Subscribers: hfinkel, bruno, volkalexey, llvm-commits, meheff, eliben, jholewinski
Differential Revision: http://reviews.llvm.org/D5633
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219773 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Fixes a FIXME in MachineSinking. Instead of using the simple heuristics
in isPostDominatedBy, use the real MachinePostDominatorTree. The old
heuristics caused instructions to sink unnecessarily, and might create
register pressure.
Test Plan:
Added a NVPTX codegen test to verify that our change is in effect. It also
shows the unnecessary register pressure caused by over-sinking. Updated
affected tests in AArch64 and X86.
Reviewers: eliben, meheff, Jiangning
Reviewed By: Jiangning
Subscribers: jholewinski, aemerson, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D4814
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216862 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Instead of specifying the alignment as metadata which may be destroyed by
transformation passes, make the alignment the second argument to ldu/ldg
intrinsic calls.
Test Plan:
ldu-ldg.ll
ldu-i8.ll
ldu-reg-plus-offset.ll
Reviewers: eliben, meheff, jholewinski
Reviewed By: meheff, jholewinski
Subscribers: jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D5093
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216731 91177308-0d34-0410-b5e6-96231b3b80d8
With optimizations disabled, we disable the isel patterns for mul.wide; but we
were still generating MULWIDE ISD nodes. Now, we only try to generate MULWIDE
ISD nodes in DAGCombine if the optimization level is not zero.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213773 91177308-0d34-0410-b5e6-96231b3b80d8
Actual support for softening f16 operations is still limited, and can be added
when it's needed. But Soften is much closer to being a useful thing to try
than keeping it Legal when no registers can actually hold such values.
Longer term, we probably want something between Soften and Promote semantics
for most targets, it'll be more efficient to promote the 4 basic operations to
f32 than libcall them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213372 91177308-0d34-0410-b5e6-96231b3b80d8
Clang may well start emitting these soon, and while it may not be
directly relevant for OpenCL or GLSL, the instructions were just
sitting there waiting to be used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213356 91177308-0d34-0410-b5e6-96231b3b80d8
We now consider the FPOpFusion flag when determining whether
to fuse ops. We also explicitly emit add.rn when fusion is
disabled to prevent ptxas from fusing the operations on its
own.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213287 91177308-0d34-0410-b5e6-96231b3b80d8
This also uses TSFlags to mark machine instructions that are surface/texture
accesses, as well as the vector width for surface operations. This is used
to simplify some of the switch statements that need to detect surface/texture
instructions
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213256 91177308-0d34-0410-b5e6-96231b3b80d8
We were not considering the stated alignment on vector loads/stores,
leading us to generate vector instructions even when we do not have
sufficient alignment.
Now, for IR like:
%1 = load <4 x float>, <4 x float>* %ptr, align 4
we will generate correct, conservative PTX like:
ld.f32 ... [%ptr]
ld.f32 ... [%ptr+4]
ld.f32 ... [%ptr+8]
ld.f32 ... [%ptr+12]
Or if we have an alignment of 8 (for example), we can
generate code like:
ld.v2.f32 ... [%ptr]
ld.v2.f32 ... [%ptr+8]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213186 91177308-0d34-0410-b5e6-96231b3b80d8
The address space of the pointer must be global (1) for these intrinsics. There must also be alignment metadata attached to the intrinsic calls, e.g.
%val = tail call i32 @llvm.nvvm.ldu.i.global.i32.p1i32(i32 addrspace(1)* %ptr), !align !0!0 = metadata !{i32 4}
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211939 91177308-0d34-0410-b5e6-96231b3b80d8
This also introduces DAGCombiner patterns for mul.wide to multiply two smaller integers and produce a larger integer
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211935 91177308-0d34-0410-b5e6-96231b3b80d8
