1. Do not statically construct a map when the program starts up, this
is expensive and cannot be optimized. Instead, create a list.
2. Do not insert entries for all function in the module into a hashmap
that lives the full life of the compiler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@25512 91177308-0d34-0410-b5e6-96231b3b80d8
1. Use the varargs version of getOrInsertFunction to simplify code.
2. remove #include
3. Reduce the number of #ifdef's.
4. remove extraneous vertical whitespace.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@25508 91177308-0d34-0410-b5e6-96231b3b80d8
Don't do floor->floorf conversion if floorf is not available. This checks
the compiler's host, not its target, which is incorrect for cross-compilers
Not sure that's important as we don't build many cross-compilers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@25456 91177308-0d34-0410-b5e6-96231b3b80d8
This patch is an incremental step towards supporting a flat symbol table.
It de-overloads the intrinsic functions by providing type-specific intrinsics
and arranging for automatically upgrading from the old overloaded name to
the new non-overloaded name. Specifically:
llvm.isunordered -> llvm.isunordered.f32, llvm.isunordered.f64
llvm.sqrt -> llvm.sqrt.f32, llvm.sqrt.f64
llvm.ctpop -> llvm.ctpop.i8, llvm.ctpop.i16, llvm.ctpop.i32, llvm.ctpop.i64
llvm.ctlz -> llvm.ctlz.i8, llvm.ctlz.i16, llvm.ctlz.i32, llvm.ctlz.i64
llvm.cttz -> llvm.cttz.i8, llvm.cttz.i16, llvm.cttz.i32, llvm.cttz.i64
New code should not use the overloaded intrinsic names. Warnings will be
emitted if they are used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@25366 91177308-0d34-0410-b5e6-96231b3b80d8
it doesn't contain any calls. This is a fairly common case for C++ code,
so it will probably speed up the inliner marginally in these cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@25284 91177308-0d34-0410-b5e6-96231b3b80d8
function was not an alloca, we wouldn't check the entry block for any allocas,
leading to increased stack space in some cases. In practice, allocas are almost
always at the top of the block, so this was never noticed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@25280 91177308-0d34-0410-b5e6-96231b3b80d8
the shifts.
This allows us to fold this (which is the 'integer add a constant' sequence
from cozmic's scheme compmiler):
int %x(uint %anf-temporary776) {
%anf-temporary777 = shr uint %anf-temporary776, ubyte 1
%anf-temporary800 = cast uint %anf-temporary777 to int
%anf-temporary804 = shl int %anf-temporary800, ubyte 1
%anf-temporary805 = add int %anf-temporary804, -2
%anf-temporary806 = or int %anf-temporary805, 1
ret int %anf-temporary806
}
into this:
int %x(uint %anf-temporary776) {
%anf-temporary776 = cast uint %anf-temporary776 to int
%anf-temporary776.mask1 = add int %anf-temporary776, -2
%anf-temporary805 = or int %anf-temporary776.mask1, 1
ret int %anf-temporary805
}
note that instcombine already knew how to eliminate the AND that the two
shifts fold into. This is tested by InstCombine/shift.ll:test26
-Chris
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@25128 91177308-0d34-0410-b5e6-96231b3b80d8
a) use better local variable names (OldMT -> OldFT) where "M" is used to
mean "Function" (perhaps it was previously "Method"?)
b) print out the module identifier in a warning message so that it is
possible to track down in which module the error occurred.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@24698 91177308-0d34-0410-b5e6-96231b3b80d8
186.crafty by about 16% (from 15.109s to 13.045s) on my system.
This turns allocas with unions/casts into scalars. For example crafty has
something like this:
union doub {
unsigned short i[4];
long long d;
};
int f(long long a) {
return ((union doub){.d=a}).i[1];
}
Instead of generating loads and stores to an alloca, we now promote the
whole thing to a scalar long value.
This implements: Transforms/ScalarRepl/AggregatePromote.ll
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@24667 91177308-0d34-0410-b5e6-96231b3b80d8
The code is organized into 3 parts (2 passes)
1) a linked set of profiling passes, which implement an analysis group (linked, like alias analysis are). These insert profiling into the program, and remember what they inserted, so that at a later time they can be queried about any instruction.
2) a pass that handles inserting the random sampling framework. This also has options to control how random samples are choosen. Currently implemented are Global counters, register allocated global counters, and read cycle counter (see? there was a reason for it).
The profiling passes are almost identical to the existing ones (block, function, and null profiling is supported right now), and they are valid passes without the sampling framework (hence the existing passes can be unified with the new ones, not done yet).
Some things are a bit ugly still, but that should be fixed up soon enough.
Other todo? making the counter values not "magic 2^16 -1" values, but dynamically choosable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@24493 91177308-0d34-0410-b5e6-96231b3b80d8
has a single def. In this case, look for uses that are dominated by the def
and attempt to rewrite them to directly use the stored value.
This speeds up mem2reg on these values and reduces the number of phi nodes
inserted. This should address PR665.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@24411 91177308-0d34-0410-b5e6-96231b3b80d8
Add support for specifying alignment and size of setjmp jmpbufs.
No targets currently do anything with this information, nor is it presrved
in the bytecode representation. That's coming up next.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@24196 91177308-0d34-0410-b5e6-96231b3b80d8
a few times in crafty:
OLD: %tmp.36 = div int %tmp.35, 8 ; <int> [#uses=1]
NEW: %tmp.36 = div uint %tmp.35, 8 ; <uint> [#uses=0]
OLD: %tmp.19 = div int %tmp.18, 8 ; <int> [#uses=1]
NEW: %tmp.19 = div uint %tmp.18, 8 ; <uint> [#uses=0]
OLD: %tmp.117 = div int %tmp.116, 8 ; <int> [#uses=1]
NEW: %tmp.117 = div uint %tmp.116, 8 ; <uint> [#uses=0]
OLD: %tmp.92 = div int %tmp.91, 8 ; <int> [#uses=1]
NEW: %tmp.92 = div uint %tmp.91, 8 ; <uint> [#uses=0]
Which all turn into shrs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@24190 91177308-0d34-0410-b5e6-96231b3b80d8
8 times in vortex, allowing the srems to be turned into shrs:
OLD: %tmp.104 = rem int %tmp.5.i37, 16 ; <int> [#uses=1]
NEW: %tmp.104 = rem uint %tmp.5.i37, 16 ; <uint> [#uses=0]
OLD: %tmp.98 = rem int %tmp.5.i24, 16 ; <int> [#uses=1]
NEW: %tmp.98 = rem uint %tmp.5.i24, 16 ; <uint> [#uses=0]
OLD: %tmp.91 = rem int %tmp.5.i19, 8 ; <int> [#uses=1]
NEW: %tmp.91 = rem uint %tmp.5.i19, 8 ; <uint> [#uses=0]
OLD: %tmp.88 = rem int %tmp.5.i14, 8 ; <int> [#uses=1]
NEW: %tmp.88 = rem uint %tmp.5.i14, 8 ; <uint> [#uses=0]
OLD: %tmp.85 = rem int %tmp.5.i9, 1024 ; <int> [#uses=2]
NEW: %tmp.85 = rem uint %tmp.5.i9, 1024 ; <uint> [#uses=0]
OLD: %tmp.82 = rem int %tmp.5.i, 512 ; <int> [#uses=2]
NEW: %tmp.82 = rem uint %tmp.5.i1, 512 ; <uint> [#uses=0]
OLD: %tmp.48.i = rem int %tmp.5.i.i161, 4 ; <int> [#uses=1]
NEW: %tmp.48.i = rem uint %tmp.5.i.i161, 4 ; <uint> [#uses=0]
OLD: %tmp.20.i2 = rem int %tmp.5.i.i, 4 ; <int> [#uses=1]
NEW: %tmp.20.i2 = rem uint %tmp.5.i.i, 4 ; <uint> [#uses=0]
it also occurs 9 times in gcc, but with odd constant divisors (1009 and 61)
so the payoff isn't as great.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@24189 91177308-0d34-0410-b5e6-96231b3b80d8
into the LLVMAnalysis library.
This allows LLVMTranform and LLVMTransformUtils to be archives and linked
with LLVMAnalysis.a, which provides any missing definitions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@24036 91177308-0d34-0410-b5e6-96231b3b80d8
SparcV9 JIT.
2. Make LLVMTransformUtils a relinked object file and always link it before
LLVMAnalysis.a. These two libraries have circular dependencies on each
other which creates problem when building the SparcV9 JIT. This change
fixes the dependency on all platforms problems with a minimum of fuss.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@24023 91177308-0d34-0410-b5e6-96231b3b80d8
one use (but one is a cast). This handles the very common case of:
X = alloc [n x byte]
Y = cast X to somethingbetter
seteq X, null
In order to avoid infinite looping when there are multiple casts, we only
allow this if the xform is strictly increasing the alignment of the
allocation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@23961 91177308-0d34-0410-b5e6-96231b3b80d8
where the second has less alignment required. If we had explicit alignment
support in the IR, we could handle this case, but we can't until we do.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@23960 91177308-0d34-0410-b5e6-96231b3b80d8
