Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177276 91177308-0d34-0410-b5e6-96231b3b80d8
Two changes:
1. Prefer SET* instructions when possible
2. Handle the CND*_INT case with floating-point args
Reviewed-by: Christian König <christian.koenig@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176699 91177308-0d34-0410-b5e6-96231b3b80d8
Maintaining CONST_COPY Instructions until Pre Emit may prevent some ifcvt case
and taking them in account for scheduling is difficult for no real benefit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176488 91177308-0d34-0410-b5e6-96231b3b80d8
Reviewed-by: Tom Stellard <thomas.stellard at amd.com>
mayLoad complexify scheduling and does not bring any usefull info
as the location is not writeable at all.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176486 91177308-0d34-0410-b5e6-96231b3b80d8
Fixes for-loop.cl piglit test
Patch By: Vincent Lejeune
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
NOTE: This is a candidate for the Mesa stable branch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175742 91177308-0d34-0410-b5e6-96231b3b80d8
NOTE: This is a candidate for the Mesa stable branch.
Reviewed-by: Tom Stellard <thomas.stellard at amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175445 91177308-0d34-0410-b5e6-96231b3b80d8
This allows MachineInstScheduler to reorder them, and thus make scheduling more
efficient.
Reviewed-by: Tom Stellard <thomas.stellard at amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175182 91177308-0d34-0410-b5e6-96231b3b80d8
'R600/SI: Use proper instructions for array/shadow samplers.' removed two
cases from TEX_SHADOW. Vincent Lejeune reported on IRC that this broke some
shadow array piglit tests with the r600g driver. Reinstating the removed
cases should fix this, and still works with radeonsi as well.
I will follow up with some lit tests which would have caught the regression.
NOTE: This is a candidate for the Mesa stable branch.
Tested-by: Vincent Lejeune <vljn@ovi.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174963 91177308-0d34-0410-b5e6-96231b3b80d8
Patch by: Michel Dänzer
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174634 91177308-0d34-0410-b5e6-96231b3b80d8
Use sub0-15 everywhere.
Patch by: Michel Dänzerr
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174610 91177308-0d34-0410-b5e6-96231b3b80d8
These instructions compare two floating point values and return an
integer true (-1) or false (0) value.
When compiling code generated by the Mesa GLSL frontend, the SET*_DX10
instructions save us four instructions for most branch decisions that
use floating-point comparisons.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174609 91177308-0d34-0410-b5e6-96231b3b80d8
Only implemented for R600 so far. SI is missing implementations of a
few callbacks used by the Indirect Addressing pass and needs code to
handle frame indices.
At the moment R600 only supports array sizes of 16 dwords or less.
Register packing of vector types is currently disabled, which means that a
vec4 is stored in T0_X, T1_X, T2_X, T3_X, rather than T0_XYZW. In order
to correctly pack registers in all cases, we will need to implement an
analysis pass for R600 that determines the correct vector width for each
array.
v2:
- Add support for i8 zext load from stack.
- Coding style fixes
v3:
- Don't reserve registers for indirect addressing when it isn't
being used.
- Fix bug caused by LLVM limiting the number of SubRegIndex
declarations.
v4:
- Fix 64-bit defines
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174525 91177308-0d34-0410-b5e6-96231b3b80d8
Something very strange is going on with the output registers in this
target. Its ISelLowering code is inserting dangling CopyToReg nodes,
hoping that those physregs won't get clobbered before the RETURN.
This patch adds the output registers as implicit uses on RETURN
instructions in the custom emission pass. I'd much prefer to have those
CopyToReg nodes glued to the RETURNs, but I don't see how.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174400 91177308-0d34-0410-b5e6-96231b3b80d8
Use one intrinsic for all sorts of interpolation.
Use two separate unexpanded instructions to represent INTERP_XY and _ZW -
this will allow to eliminate one part if it's not used.
Track liveness of special interpolation regs instead of reserving them -
this will allow to reuse those regs, lowering reg pressure.
Patch By: Vadim Girlin
v2[Vincent Lejeune]: Rebased against current llvm master
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174394 91177308-0d34-0410-b5e6-96231b3b80d8
This intrinsic is translated to ALLOC_EXPORT_WORD1_SWIZ, hence its
name. It is used to store vs/fs outputs
Patch by: Vincent Lejeune
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173297 91177308-0d34-0410-b5e6-96231b3b80d8
Remove Cxxx registers, add new special register - "ALU_CONST" and new
operand for each alu src - "sel". ALU_CONST is used to designate that the
new operand contains the value to override src.sel, src.kc_bank, src.chan
for constants in the driver.
Patch by: Vadim Girlin
Vincent Lejeune:
- Use pointers for constants
- Fold CONST_ADDRESS when possible
Tom Stellard:
- Give CONSTANT_BUFFER_0 its own address space
- Use integer types for constant loads
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173222 91177308-0d34-0410-b5e6-96231b3b80d8
Patch by: Michel Dänzer
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173053 91177308-0d34-0410-b5e6-96231b3b80d8
This patch replaces the control flow handling with a new
pass which structurize the graph before transforming it to
machine instruction. This has a couple of different advantages
and currently fixes 20 piglit tests without a single regression.
It is now a general purpose transformation that could be not
only be used for SI/R6xx, but also for other hardware
implementations that use a form of structurized control flow.
v2: further cleanup, fixes and documentation
Patch by: Christian König
Signed-off-by: Christian König <deathsimple@vodafone.de>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170591 91177308-0d34-0410-b5e6-96231b3b80d8
