returns early then it is slightly faster to execute a sequence of NOP
instructions to wait until the return address is ready,
as opposed to simply stalling on the ret instruction
until the return address is ready.
When compiling for X86 Atom only, this patch will run a pass, called
"X86PadShortFunction" which will add NOP instructions where less than four
cycles elapse between function entry and return.
It includes tests.
Patch by Andy Zhang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171524 91177308-0d34-0410-b5e6-96231b3b80d8
Simplified TRUNCATE operation that comes after SETCC. It is possible since SETCC result is 0 or -1.
Added a test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171468 91177308-0d34-0410-b5e6-96231b3b80d8
Most IMPLICIT_DEF instructions are removed by the ProcessImplicitDefs
pass, and a few are reinserted by PHIElimination when a PHI argument is
<undef>.
RegisterCoalescer was assuming that all IMPLICIT_DEF live ranges look
like those created by PHIElimination, and that their live range never
leaves the basic block.
The PR14732 test case does tricks with PHI nodes that causes a longer
IMPLICIT_DEF live range to appear. This happens very rarely, but
RegisterCoalescer should be able to handle it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171435 91177308-0d34-0410-b5e6-96231b3b80d8
DAGCombiner::reduceBuildVecConvertToConvertBuildVec() was making two
mistakes:
1. It was checking the legality of scalar INT_TO_FP nodes and then generating
vector nodes.
2. It was passing the result value type to
TargetLoweringInfo::getOperationAction() when it should have been
passing the value type of the first operand.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171420 91177308-0d34-0410-b5e6-96231b3b80d8
register. In most cases we actually compare or select YMM-sized registers
and mixing the two types creates horrible code. This commit optimizes
some of the transition sequences.
PR14657.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171148 91177308-0d34-0410-b5e6-96231b3b80d8
As with the prefetch intrinsic to which it maps, simply have dcbt
marked as reading from and writing to its arguments instead of having
unmodeled side effects. While this might cause unwanted code motion
(because aliasing checks don't really capture cache-line sharing),
it is more important that prefetches in unrolled loops don't block
the scheduler from rearranging the unrolled loop body.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171073 91177308-0d34-0410-b5e6-96231b3b80d8
Use of store or load with the atomic specifier on 64-bit types would
cause instruction-selection failures. As with the 32-bit case, these
can use the default expansion in terms of cmp-and-swap.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171072 91177308-0d34-0410-b5e6-96231b3b80d8
When these instructions are encoded in VEX (on AVX) there is no such requirement. This changes the folding
tables and removes the alignment restrictions from VEX-encoded instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171024 91177308-0d34-0410-b5e6-96231b3b80d8
pmuludq is slow, but it turns out that all the unpacking and packing of the
scalarized mul is even slower. 10% speedup on loop-vectorized paq8p.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170985 91177308-0d34-0410-b5e6-96231b3b80d8
Also loosen the SSSE3 dependency a bit, expanded pshufb + psra is still better
than scalarized loads. Fixes PR14590.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170984 91177308-0d34-0410-b5e6-96231b3b80d8
The only way to read the eflags is using push and pop. If we don't
adjust the stack then we run over the first frame index. This is
not something that we want to do, so we have to make sure that
our machine function does not copy the flags. If it does then
we have to emit the prolog that adjusts the stack.
rdar://12896831
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170961 91177308-0d34-0410-b5e6-96231b3b80d8
are more expensive than the non-flag setting variant. Teach thumb2 size
reduction pass to avoid generating them unless we are optimizing for size.
rdar://12892707
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170728 91177308-0d34-0410-b5e6-96231b3b80d8
these patches are tested a lot by test-suite but
make check tests are forthcoming once the next
few patches that complete this are committed.
with the next few patches the pass rate for mips16 is
near 100%
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170656 91177308-0d34-0410-b5e6-96231b3b80d8
physical register $r1 to $r0.
GNU disassembler recognizes an "or" instruction as a "move", and this change
makes the disassembled code easier to read.
Original patch by Reed Kotler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170655 91177308-0d34-0410-b5e6-96231b3b80d8
((x & 0xff00) >> 8) << 2
to
(x >> 6) & 0x3fc
This is general goodness since it folds a left shift into the mask. However,
the trailing zeros in the mask prevents the ARM backend from using the bit
extraction instructions. And worse since the mask materialization may require
an addition instruction. This comes up fairly frequently when the result of
the bit twiddling is used as memory address. e.g.
= ptr[(x & 0xFF0000) >> 16]
We want to generate:
ubfx r3, r1, #16, #8
ldr.w r3, [r0, r3, lsl #2]
vs.
mov.w r9, #1020
and.w r2, r9, r1, lsr #14
ldr r2, [r0, r2]
Add a late ARM specific isel optimization to
ARMDAGToDAGISel::PreprocessISelDAG(). It folds the left shift to the
'base + offset' address computation; change the mask to one which doesn't have
trailing zeros and enable the use of ubfx.
Note the optimization has to be done late since it's target specific and we
don't want to change the DAG normalization. It's also fairly restrictive
as shifter operands are not always free. It's only done for lsh 1 / 2. It's
known to be free on some cpus and they are most common for address
computation.
This is a slight win for blowfish, rijndael, etc.
rdar://12870177
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170581 91177308-0d34-0410-b5e6-96231b3b80d8
There's probably a better expansion for those nodes than the default for
altivec, but this is better than crashing. VSELECTs occur in loop vectorizer
output.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170551 91177308-0d34-0410-b5e6-96231b3b80d8
bitwidth op back to the original size. If we reduce ANDs then this can cause
an endless loop. This patch changes the ZEXT to ANY_EXTEND if the demanded bits
are equal or smaller than the size of the reduced operation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170505 91177308-0d34-0410-b5e6-96231b3b80d8
To not over constrain the scheduler for ARM in thumb mode, some optimizations for code size reduction, specific to ARM thumb, are blocked when they add a dependency (like write after read dependency).
Disables this check when code size is the priority, i.e., code is compiled with -Oz.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170462 91177308-0d34-0410-b5e6-96231b3b80d8
A register can be associated with several distinct register classes.
For example, on PPC, the floating point registers are each associated with
both F4RC (which holds f32) and F8RC (which holds f64). As a result, this code
would fail when provided with a floating point register and an f64 operand
because it would happen to find the register in the F4RC class first and
return that. From the F4RC class, SDAG would extract f32 as the register
type and then assert because of the invalid implied conversion between
the f64 value and the f32 register.
Instead, search all register classes. If a register class containing the
the requested register has the requested type, then return that register
class. Otherwise, as before, return the first register class found that
contains the requested register.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170436 91177308-0d34-0410-b5e6-96231b3b80d8
Mips16 is really a processor decoding mode (ala thumb 1) and in the same
program, mips16 and mips32 functions can exist and can call each other.
If a jal type instruction encounters an address with the lower bit set, then
the processor switches to mips16 mode (if it is not already in it). If the
lower bit is not set, then it switches to mips32 mode.
The linker knows which functions are mips16 and which are mips32.
When relocation is performed on code labels, this lower order bit is
set if the code label is a mips16 code label.
In general this works just fine, however when creating exception handling
tables and dwarf, there are cases where you don't want this lower order
bit added in.
This has been traditionally distinguished in gas assembly source by using a
different syntax for the label.
lab1: ; this will cause the lower order bit to be added
lab2=. ; this will not cause the lower order bit to be added
In some cases, it does not matter because in dwarf and debug tables
the difference of two labels is used and in that case the lower order
bits subtract each other out.
To fix this, I have added to mcstreamer the notion of a debuglabel.
The default is for label and debug label to be the same. So calling
EmitLabel and EmitDebugLabel produce the same result.
For various reasons, there is only one set of labels that needs to be
modified for the mips exceptions to work. These are the "$eh_func_beginXXX"
labels.
Mips overrides the debug label suffix from ":" to "=." .
This initial patch fixes exceptions. More changes most likely
will be needed to DwarfCFException to make all of this work
for actual debugging. These changes will be to emit debug labels in some
places where a simple label is emitted now.
Some historical discussion on this from gcc can be found at:
http://gcc.gnu.org/ml/gcc-patches/2008-08/msg00623.htmlhttp://gcc.gnu.org/ml/gcc-patches/2008-11/msg01273.html
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170279 91177308-0d34-0410-b5e6-96231b3b80d8
We match the pattern "x >= y ? x-y : 0" into "subus x, y" and two special cases
if y is a constant. DAGCombiner canonicalizes those so we first have to undo the
canonicalization for those cases. The pattern occurs in gzip when the loop
vectorizer is enabled. Part of PR14613.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170273 91177308-0d34-0410-b5e6-96231b3b80d8
In this case, essentially it is soft float with different library routines.
The next step will be to make this fully interoperational with mips32 floating
point and that requires creating stubs for functions with signatures that
contain floating point types.
I have a more sophisticated design for mips16 hardfloat which I hope to
implement at a later time that directly does floating point without the need
for function calls.
The mips16 encoding has no floating point instructions so one needs to
switch to mips32 mode to execute floating point instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170259 91177308-0d34-0410-b5e6-96231b3b80d8
