Arguments passed as "byval align" should get the specified alignment
in the parameter save area. There was some code in PPCISelLowering.cpp
that attempted to implement this, but this didn't work correctly:
while code did update the ArgOffset value, it neglected to update
the PtrOff value (which was already computed from the old ArgOffset),
and it also neglected to update GPR_idx -- fields skipped due to
alignment in the save area must likewise be skipped in GPRs.
This patch fixes and simplifies this logic by:
- handling argument offset alignment right at the beginning
of argument processing, using a new helper routine
CalculateStackSlotAlignment (this avoids having to update
PtrOff and other derived values later on)
- not tracking GPR_idx separately, but always computing the
correct GPR_idx for each argument *from* its ArgOffset
- removing some redundant computation in LowerFormalArguments:
MinReservedArea must equal ArgOffset after argument processing,
so there's no use in computing it twice.
[This doesn't change the behavior of the current clang front-end,
since that never creates "byval align" arguments at the moment.
This will change with a follow-on patch, however.]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212476 91177308-0d34-0410-b5e6-96231b3b80d8
lanes in vector splats.
The core problem here is that undef lanes can't *unilaterally* be
considered to contribute to splats. Their handling needs to be more
cautious. There is also a reported failure of the nightly testers
(thanks Tobias!) that may well stem from the same core issue. I'm going
to fix this theoretical issue, factor the APIs a bit better, and then
verify that I don't see anything bad with Tobias's reduction from the
test suite before recommitting.
Original commit message for r212324:
[x86] Generalize BuildVectorSDNode::getConstantSplatValue to work for
any constant, constant FP, or undef splat and to tolerate any undef
lanes in a splat, then replace all uses of isSplatVector in X86's
lowering with it.
This fixes issues where undef lanes in an otherwise splat vector would
prevent the splat logic from firing. It is a touch more awkward to use
this interface, but it is much more accurate. Suggestions for better
interface structuring welcome.
With this fix, the code generated with the widening legalization
strategy for widen_cast-4.ll is *dramatically* improved as the special
lowering strategies for a v16i8 SRA kick in even though the high lanes
are undef.
We also get a slightly different choice for broadcasting an aligned
memory location, and use vpshufd instead of vbroadcastss. This looks
like a minor win for pipelining and domain crossing, but a minor loss
for the number of micro-ops. I suspect its a wash, but folks can
easily tweak the lowering if they want.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212475 91177308-0d34-0410-b5e6-96231b3b80d8
Fixes various bugs with reordering loads and stores.
Scalarized vector loads weren't collecting the chains
at all.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212473 91177308-0d34-0410-b5e6-96231b3b80d8
Generate entire ASan asm instrumentation in MC without
relying on runtime helper functions.
Patch by Yuri Gorshenin.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212455 91177308-0d34-0410-b5e6-96231b3b80d8
essentially a DAG combine that never gets a chance to run.
We might typically expect DAG combining to remove shuffles-of-splats and
other similar patterns, but we don't get a chance to run the DAG
combiner when we recursively form sub-shuffles during the lowering of
a shuffle. So instead hand-roll a really important combine directly into
the lowering code to detect shuffles-of-splats, especially shuffles of
an all-zero splat which needn't even have the same element width, etc.
This lets the new vector shuffle lowering handle shuffles which
implement things like zero-extension really nicely. This will become
even more important when I wire the legalization of zero-extension to
vector shuffles with the new widening legalization strategy.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212444 91177308-0d34-0410-b5e6-96231b3b80d8
We've been performing the wrong operation on ARM for "atomicrmw nand" for
years, since "a NAND b" is "~(a & b)" rather than ARM's very tempting "a & ~b".
This bled over into the generic expansion pass.
So I assume no-one has ever actually tried to do an atomic nand in the real
world. Oh well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212443 91177308-0d34-0410-b5e6-96231b3b80d8
This completes the handling for DLL import storage symbols when lowering
instructions. A DLL import storage symbol must have an additional load
performed prior to use. This is applicable to variables and functions.
This is particularly important for non-function symbols as it is possible to
handle function references by emitting a thunk which performs the translation
from the unprefixed __imp_ symbol to the proper symbol (although, this is a
non-optimal lowering). For a variable symbol, no such thunk can be
accommodated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212431 91177308-0d34-0410-b5e6-96231b3b80d8
Add support for tracking DLLImport storage class information on a per symbol
basis in the ARM instruction selection. Use that information to correctly
mangle the symbol (dllimport symbols are referenced via *__imp_<name>).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212430 91177308-0d34-0410-b5e6-96231b3b80d8
Ensure that all paths that retrieve the symbol name go through GetARMGVSymbol
rather than getSymbol. This is desirable so that any global symbol mangling can
be centralised to this function. The motivation for this is handling of symbols
that are marked as having dll import dll storage. Such a symbol requires an
extra load that is currently handled in the backend and a __imp_ prefix on the
symbol name.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212429 91177308-0d34-0410-b5e6-96231b3b80d8
The linker relies on relocation type info (e.g. is it a branch?) to perform the
correct actions, so we should keep that even when we end up using a scattered
relocation for whatever reason.
rdar://problem/17553104
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212333 91177308-0d34-0410-b5e6-96231b3b80d8
We have detected a documentation bug in the encoding tables of the released
MIPS64r6 specification that has resulted in the wrong encodings being used for
these instructions in LLVM. This commit corrects them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212330 91177308-0d34-0410-b5e6-96231b3b80d8
any constant, constant FP, or undef splat and to tolerate any undef
lanes in a splat, then replace all uses of isSplatVector in X86's
lowering with it.
This fixes issues where undef lanes in an otherwise splat vector would
prevent the splat logic from firing. It is a touch more awkward to use
this interface, but it is much more accurate. Suggestions for better
interface structuring welcome.
With this fix, the code generated with the widening legalization
strategy for widen_cast-4.ll is *dramatically* improved as the special
lowering strategies for a v16i8 SRA kick in even though the high lanes
are undef.
We also get a slightly different choice for broadcasting an aligned
memory location, and use vpshufd instead of vbroadcastss. This looks
like a minor win for pipelining and domain crossing, but a minor loss
for the number of micro-ops. I suspect its a wash, but folks can easily
tweak the lowering if they want.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212324 91177308-0d34-0410-b5e6-96231b3b80d8
Silvermont can only decode one instruction per cycle if the instruction exceeds 8 bytes.
Also in Silvermont instructions with more than 3 prefixes will cause 3 cycle penalty.
Maximum nop length is limited to 7 bytes when used for padding on Silvermont.
For other x86 processors max nop length remains unchanged 15 bytes.
Differential Revision: http://reviews.llvm.org/D4374
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212321 91177308-0d34-0410-b5e6-96231b3b80d8
subtarget. This involved having the movt predicate take the current
function - since we care about size in instruction selection for
whether or not to use movw/movt take the function so we can check
the attributes. This required adding the current MachineFunction to
FastISel and propagating through.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212309 91177308-0d34-0410-b5e6-96231b3b80d8
subtarget from ARMISelDAGtoDAG. The former is unnecessary and the
latter is initialized on each runOnMachineFunction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212297 91177308-0d34-0410-b5e6-96231b3b80d8
This patch:
1) Improves the cost model for x86 alternate shuffles (originally
added at revision 211339);
2) Teaches the Cost Model Analysis pass how to analyze alternate shuffles.
Alternate shuffles are a special kind of blend; on x86, we can often
easily lowered alternate shuffled into single blend
instruction (depending on the subtarget features).
The existing cost model didn't take into account subtarget features.
Also, it had a couple of "dead" entries for vector types that are never
legal (example: on x86 types v2i32 and v2f32 are not legal; those are
always either promoted or widened to 128-bit vector types).
The new x86 cost model takes into account what target features we have
before returning the shuffle cost (i.e. the number of instructions
after the blend is lowered/expanded).
This patch also teaches the Cost Model Analysis how to identify and analyze
alternate shuffles (i.e. 'SK_Alternate' shufflevector instructions):
- added function 'isAlternateVectorMask';
- added some logic to check if an instruction is a alternate shuffle and, in
case, call the target specific TTI to get the corresponding shuffle cost;
- added a test to verify the cost model analysis on alternate shuffles.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212296 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds tablegen patterns to select F16C float-to-half-float
conversion instructions from 'f32_to_f16' and 'f16_to_f32' dag nodes.
If the target doesn't have F16C, then 'f32_to_f16' and 'f16_to_f32'
are expanded into library calls.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212293 91177308-0d34-0410-b5e6-96231b3b80d8
Adds support for __builtin_arm_isb. Also corrects DSB and ISB instructions
modelling by adding has-side-effects property.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212276 91177308-0d34-0410-b5e6-96231b3b80d8
mode.
This also runs the test in that mode which would reproduce the crash.
What I love is that *every single FIXME* in the test is addressed by
switching to widening.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212254 91177308-0d34-0410-b5e6-96231b3b80d8
Finkel, Eric Christopher, and a bunch of other people I'm probably
forgetting (sorry), add an option to the x86 backend to widen vectors
during type legalization rather than promote them.
This still would promote vNi1 vectors to get the masks right, but would
widen other vectors. A lot of experiments are piling up right now
showing that widening should probably be the default legalization
strategy outside of vNi1 cases, but it is very hard to test the
rammifications of that and fix bugs in widening-based legalization
without an option that enables it. I'll be checking in tests shortly
that use this option to exercise cases where widening doesn't work well
and hopefully we'll be able to switch fully to this soon.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212249 91177308-0d34-0410-b5e6-96231b3b80d8
vector type legalization strategies in a more fine grained manner, and
change the legalization of several v1iN types and v1f32 to be widening
rather than scalarization on AArch64.
This fixes an assertion failure caused by scalarizing nodes like "v1i32
trunc v1i64". As v1i64 is legal it will fail to scalarize v1i32.
This also provides a foundation for other targets to have more granular
control over how vector types are legalized.
Patch by Hao Liu, reviewed by Tim Northover. I'm committing it to allow
some work to start taking place on top of this patch as it adds some
really important hooks to the backend that I'd like to immediately start
using. =]
http://reviews.llvm.org/D4322
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212242 91177308-0d34-0410-b5e6-96231b3b80d8
This new multiclass, avx512_perm_table_3src derives from the current one and
provides the Pat<>. The next patch will add another Pat<> that uses the
writemask.
Note that I dropped the type annotation from the intrinsic call, i.e.: (v16f32
VR512:$src1) -> R512:$src1. I think that this should be fine (at least many
intrinsic calls don't provide them) and it greatly reduces the number of
template arguments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212222 91177308-0d34-0410-b5e6-96231b3b80d8
This includes assembler and codegen support (see the new tests in
avx512-encodings.s and avx512-shuffle.ll).
<rdar://problem/17492620>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212221 91177308-0d34-0410-b5e6-96231b3b80d8
SGPRs are written by instructions that sometimes will ignore control flow,
which means if you have code like:
if (VGPR0) {
SGPR0 = S_MOV_B32 0
} else {
SGPR0 = S_MOV_B32 1
}
The value of SGPR0 will 1 no matter what the condition is.
In order to deal with this situation correctly, we need to view the
program as if it were a single basic block when we calculate the
live ranges for the SGPRs. They way we actually update the live
range is by iterating over all of the segments in each LiveRange
object and setting the end of each segment equal to the start of
the next segment. So a live range like:
[3888r,9312r:0)[10032B,10384B:0) 0@3888r
will become:
[3888r,10032B:0)[10032B,10384B:0) 0@3888r
This change will allow us to use SALU instructions within branches.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212215 91177308-0d34-0410-b5e6-96231b3b80d8
heuristic.
By default, no functionality change.
This is a follow-up of r212099.
This hook provides a finer grain to control the optimization.
<rdar://problem/17444599>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212204 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commits r212189 and r212190.
While this pass was accidentally disabled (until r212073), r205437
slipped in a use of `auto` that should have been `auto&`.
This fixes PR20188.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212201 91177308-0d34-0410-b5e6-96231b3b80d8
