This revision attempts to recognize following population-count pattern:
while(a) { c++; ... ; a &= a - 1; ... },
where <c> and <a>could be used multiple times in the loop body.
TODO: On X8664 and ARM, __buildin_ctpop() are not expanded to a efficent
instruction sequence, which need to be improved in the following commits.
Reviewed by Nadav, really appreciate!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168931 91177308-0d34-0410-b5e6-96231b3b80d8
For some targets, it is desirable to prefer scalarizing <N x i1> instead of promoting to a larger legal type, such as <N x i32>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168882 91177308-0d34-0410-b5e6-96231b3b80d8
The createPPCMCAsmInfo routine used PPC::R1 as the initial frame
pointer register, but on PPC64 the 32-bit R1 register does not
have a corresponding DWARF number, causing invalid CIE initial
frame state to be emitted. Fix by using PPC::X1 instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168799 91177308-0d34-0410-b5e6-96231b3b80d8
The Target library is not allowed to depend on the large CodeGen
library, but the TRI and TII classes provide abstract interfaces that
require both caller and callee to link to CodeGen.
The implementation files for these classes provide default
implementations of some of the hooks. These methods may need to
reference CodeGen, so they belong in that library.
We already have a number of methods implemented in the
TargetInstrInfoImpl sub-class because of that. I will merge that class
into the parent next.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168758 91177308-0d34-0410-b5e6-96231b3b80d8
When the CodeGenInfo is to be created for the PPC64 target machine,
a default code-model selection is converted to CodeModel::Medium
provided we are not targeting the Darwin OS. Defaults for Darwin
are unaffected.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168747 91177308-0d34-0410-b5e6-96231b3b80d8
classes. The vast majority of the remaining issues are due to uses of
invalid registers, which are defined by getRegForValue(). Those will be
a little more challenging to cleanup.
rdar://12719844
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168735 91177308-0d34-0410-b5e6-96231b3b80d8
when the destination register is wider than the memory load.
These load instructions load from m32 or m64 and set the upper bits to zero,
while the folded instructions may accept m128.
rdar://12721174
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168710 91177308-0d34-0410-b5e6-96231b3b80d8
The default for 64-bit PowerPC is small code model, in which TOC entries
must be addressable using a 16-bit offset from the TOC pointer. Additionally,
only TOC entries are addressed via the TOC pointer.
With medium code model, TOC entries and data sections can all be addressed
via the TOC pointer using a 32-bit offset. Cooperation with the linker
allows 16-bit offsets to be used when these are sufficient, reducing the
number of extra instructions that need to be executed. Medium code model
also does not generate explicit TOC entries in ".section toc" for variables
that are wholly internal to the compilation unit.
Consider a load of an external 4-byte integer. With small code model, the
compiler generates:
ld 3, .LC1@toc(2)
lwz 4, 0(3)
.section .toc,"aw",@progbits
.LC1:
.tc ei[TC],ei
With medium model, it instead generates:
addis 3, 2, .LC1@toc@ha
ld 3, .LC1@toc@l(3)
lwz 4, 0(3)
.section .toc,"aw",@progbits
.LC1:
.tc ei[TC],ei
Here .LC1@toc@ha is a relocation requesting the upper 16 bits of the
32-bit offset of ei's TOC entry from the TOC base pointer. Similarly,
.LC1@toc@l is a relocation requesting the lower 16 bits. Note that if
the linker determines that ei's TOC entry is within a 16-bit offset of
the TOC base pointer, it will replace the "addis" with a "nop", and
replace the "ld" with the identical "ld" instruction from the small
code model example.
Consider next a load of a function-scope static integer. For small code
model, the compiler generates:
ld 3, .LC1@toc(2)
lwz 4, 0(3)
.section .toc,"aw",@progbits
.LC1:
.tc test_fn_static.si[TC],test_fn_static.si
.type test_fn_static.si,@object
.local test_fn_static.si
.comm test_fn_static.si,4,4
For medium code model, the compiler generates:
addis 3, 2, test_fn_static.si@toc@ha
addi 3, 3, test_fn_static.si@toc@l
lwz 4, 0(3)
.type test_fn_static.si,@object
.local test_fn_static.si
.comm test_fn_static.si,4,4
Again, the linker may replace the "addis" with a "nop", calculating only
a 16-bit offset when this is sufficient.
Note that it would be more efficient for the compiler to generate:
addis 3, 2, test_fn_static.si@toc@ha
lwz 4, test_fn_static.si@toc@l(3)
The current patch does not perform this optimization yet. This will be
addressed as a peephole optimization in a later patch.
For the moment, the default code model for 64-bit PowerPC will remain the
small code model. We plan to eventually change the default to medium code
model, which matches current upstream GCC behavior. Note that the different
code models are ABI-compatible, so code compiled with different models will
be linked and execute correctly.
I've tested the regression suite and the application/benchmark test suite in
two ways: Once with the patch as submitted here, and once with additional
logic to force medium code model as the default. The tests all compile
cleanly, with one exception. The mandel-2 application test fails due to an
unrelated ABI compatibility with passing complex numbers. It just so happens
that small code model was incredibly lucky, in that temporary values in
floating-point registers held the expected values needed by the external
library routine that was called incorrectly. My current thought is to correct
the ABI problems with _Complex before making medium code model the default,
to avoid introducing this "regression."
Here are a few comments on how the patch works, since the selection code
can be difficult to follow:
The existing logic for small code model defines three pseudo-instructions:
LDtoc for most uses, LDtocJTI for jump table addresses, and LDtocCPT for
constant pool addresses. These are expanded by SelectCodeCommon(). The
pseudo-instruction approach doesn't work for medium code model, because
we need to generate two instructions when we match the same pattern.
Instead, new logic in PPCDAGToDAGISel::Select() intercepts the TOC_ENTRY
node for medium code model, and generates an ADDIStocHA followed by either
a LDtocL or an ADDItocL. These new node types correspond naturally to
the sequences described above.
The addis/ld sequence is generated for the following cases:
* Jump table addresses
* Function addresses
* External global variables
* Tentative definitions of global variables (common linkage)
The addis/addi sequence is generated for the following cases:
* Constant pool entries
* File-scope static global variables
* Function-scope static variables
Expanding to the two-instruction sequences at select time exposes the
instructions to subsequent optimization, particularly scheduling.
The rest of the processing occurs at assembly time, in
PPCAsmPrinter::EmitInstruction. Each of the instructions is converted to
a "real" PowerPC instruction. When a TOC entry needs to be created, this
is done here in the same manner as for the existing LDtoc, LDtocJTI, and
LDtocCPT pseudo-instructions (I factored out a new routine to handle this).
I had originally thought that if a TOC entry was needed for LDtocL or
ADDItocL, it would already have been generated for the previous ADDIStocHA.
However, at higher optimization levels, the ADDIStocHA may appear in a
different block, which may be assembled textually following the block
containing the LDtocL or ADDItocL. So it is necessary to include the
possibility of creating a new TOC entry for those two instructions.
Note that for LDtocL, we generate a new form of LD called LDrs. This
allows specifying the @toc@l relocation for the offset field of the LD
instruction (i.e., the offset is replaced by a SymbolLo relocation).
When the peephole optimization described above is added, we will need
to do similar things for all immediate-form load and store operations.
The seven "mcm-n.ll" test cases are kept separate because otherwise the
intermingling of various TOC entries and so forth makes the tests fragile
and hard to understand.
The above assumes use of an external assembler. For use of the
integrated assembler, new relocations are added and used by
PPCELFObjectWriter. Testing is done with "mcm-obj.ll", which tests for
proper generation of the various relocations for the same sequences
tested with the external assembler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168708 91177308-0d34-0410-b5e6-96231b3b80d8
classes. The associated test case still doesn't pass, but it does have far
fewer issues.
rdar://12719844
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168657 91177308-0d34-0410-b5e6-96231b3b80d8
This pass was conservative in that it always reserved the FP to enable dynamic
stack realignment, which allowed the RA to use aligned spills for vector
registers. This happens even when spills were not necessary. The RA has
since been improved to use unaligned spills when necessary.
The new behavior is to realign the stack if the frame pointer was already
reserved for some other reason, but don't reserve the frame pointer just
because a function contains vector virtual registers.
Part of rdar://12719844
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168627 91177308-0d34-0410-b5e6-96231b3b80d8
The last remaining bit is "bcl 20, 31, AnonSymbol", which I couldn't find the
instruction definition for. Only whitespace changes in assembly output.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168541 91177308-0d34-0410-b5e6-96231b3b80d8
I discovered a few more missing functions while migrating optimizations
from the simplify-libcalls pass to the instcombine (I already added some
in r167659).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168501 91177308-0d34-0410-b5e6-96231b3b80d8
This patch provides support for the MIPS relocations:
*) R_MIPS_GOT_HI16
*) R_MIPS_GOT_LO16
*) R_MIPS_CALL_HI16
*) R_MIPS_CALL_LO16
These are used for large GOT instruction sequences.
Contributer: Jack Carter
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168471 91177308-0d34-0410-b5e6-96231b3b80d8
This patch replaces the hard coded GPR pair [R0, R1] of
Intrinsic:arm_ldrexd and [R2, R3] of Intrinsic:arm_strexd with
even/odd GPRPair reg class.
Similar to the lowering of atomic_64 operation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168207 91177308-0d34-0410-b5e6-96231b3b80d8
This patch lowers the llvm.floor, llvm.ceil, llvm.trunc, and
llvm.nearbyint to Altivec instruction when using 4 single-precision
float vectors.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168086 91177308-0d34-0410-b5e6-96231b3b80d8
The stack realignment code was fixed to work when there is stack realignment and
a dynamic alloca is present so this shouldn't cause correctness issues anymore.
Note that this also enables generation of AVX instructions for memset
under the assumptions:
- Unaligned loads/stores are always fast on CPUs supporting AVX
- AVX is not slower than SSE
We may need some tweaked heuristics if one of those assumptions turns out not to
be true.
Effectively reverts r58317. Part of PR2962.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167967 91177308-0d34-0410-b5e6-96231b3b80d8
This patch changes the definition of negative from -0..-255 to -1..-255. I am changing this because of
a bug that we had in some of the patterns that assumed that "subs" of zero does not set the carry flag.
rdar://12028498
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167963 91177308-0d34-0410-b5e6-96231b3b80d8
Loads from i1 become loads from i8 followed by trunc
Stores to i1 become zext to i8 followed by store to i8
Fixes PR13291
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167948 91177308-0d34-0410-b5e6-96231b3b80d8
When an instruction as written requires 32-bit mode and we're assembling
in 64-bit mode, or vice-versa, issue a more specific diagnostic about
what's wrong.
rdar://12700702
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167937 91177308-0d34-0410-b5e6-96231b3b80d8
chain is correctly setup.
As an example, if the original load must happen before later stores, we need
to make sure the constructed VZEXT_LOAD is constrained to be before the stores.
rdar://12684358
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167859 91177308-0d34-0410-b5e6-96231b3b80d8
This allows me to begin enabling (or backing out) misched by default
for one subtarget at a time. To run misched we typically want to:
- Disable SelectionDAG scheduling (use the source order scheduler)
- Enable more aggressive coalescing (until we decide to always run the coalescer this way)
- Enable MachineScheduler pass itself.
Disabling PostRA sched may follow for some subtargets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167826 91177308-0d34-0410-b5e6-96231b3b80d8
This infrastructure is generally useful for any target that wants to
strongly prefer two instructions to be adjacent after scheduling.
A following checkin will add target-specific hooks with unit
tests. Then this feature will be enabled by default with misched.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167742 91177308-0d34-0410-b5e6-96231b3b80d8
- Fix operand order for atomic sub, where the minuend is the value
loaded from memory and the subtrahend is the parameter specified.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167718 91177308-0d34-0410-b5e6-96231b3b80d8
Each SM and PTX version is modeled as a subtarget feature/CPU. Additionally,
PTX 3.1 is added as the default PTX version to be out-of-the-box compatible
with CUDA 5.0.
Available CPUs for this target:
sm_10 - Select the sm_10 processor.
sm_11 - Select the sm_11 processor.
sm_12 - Select the sm_12 processor.
sm_13 - Select the sm_13 processor.
sm_20 - Select the sm_20 processor.
sm_21 - Select the sm_21 processor.
sm_30 - Select the sm_30 processor.
sm_35 - Select the sm_35 processor.
Available features for this target:
ptx30 - Use PTX version 3.0.
ptx31 - Use PTX version 3.1.
sm_10 - Target SM 1.0.
sm_11 - Target SM 1.1.
sm_12 - Target SM 1.2.
sm_13 - Target SM 1.3.
sm_20 - Target SM 2.0.
sm_21 - Target SM 2.1.
sm_30 - Target SM 3.0.
sm_35 - Target SM 3.5.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167699 91177308-0d34-0410-b5e6-96231b3b80d8
