Summary: x86 allows either ordering for the LOCK and DATA16 prefixes, but using GCC+GAS leads to different code generation than using LLVM. This change matches the order that GAS emits the x86 prefixes when a semicolon isn't used in inline assembly (see tc-i386.c comment before define LOCK_PREFIX), and helps simplify tooling that operates on the instruction's byte sequence (such as NaCl's validator). This change shouldn't have any performance impact.
Test Plan: ninja check
Reviewers: craig.topper, jvoung
Subscribers: jfb, llvm-commits
Differential Revision: http://reviews.llvm.org/D6630
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224283 91177308-0d34-0410-b5e6-96231b3b80d8
Adds the various "rm" instruction variants into the list of instructions that have a partial register update. Also adds all variants of SQRTSD that were missing in the original list.
Differential Revision: http://reviews.llvm.org/D6620
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224246 91177308-0d34-0410-b5e6-96231b3b80d8
Previously print+verify passes were added in a very unsystematic way, which is
annoying when debugging as you miss intermediate steps and allows bugs to stay
unnotice when no verification is performed.
To make this change practical I added the possibility to explicitely disable
verification. I used this option on all places where no verification was
performed previously (because alot of places actually don't pass the
MachineVerifier).
In the long term these problems should be fixed properly and verification
enabled after each pass. I'll enable some more verification in subsequent
commits.
This is the 2nd attempt at this after realizing that PassManager::add() may
actually delete the pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224059 91177308-0d34-0410-b5e6-96231b3b80d8
Previously print+verify passes were added in a very unsystematic way, which is
annoying when debugging as you miss intermediate steps and allows bugs to stay
unnotice when no verification is performed.
To make this change practical I added the possibility to explicitely disable
verification. I used this option on all places where no verification was
performed previously (because alot of places actually don't pass the
MachineVerifier).
In the long term these problems should be fixed properly and verification
enabled after each pass. I'll enable some more verification in subsequent
commits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224042 91177308-0d34-0410-b5e6-96231b3b80d8
We can't reach those from zext, but other parts of the backend (the shuffle
lowering) generate 256-bit VZEXT nodes.
Fixes PR21876.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223996 91177308-0d34-0410-b5e6-96231b3b80d8
EltsFromConsecutiveLoads was apparently only ever called for 128-bit vectors, and assumed this implicitly. r223518 started calling it for AVX-sized vectors, causing the code path that had this assumption to crash.
This adds a check to make this path fire only for 128-bit vectors.
Differential Revision: http://reviews.llvm.org/D6579
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223922 91177308-0d34-0410-b5e6-96231b3b80d8
Lowering patterns were written through avx512_broadcast_pat multiclass as pattern generates VBROADCAST and COPY_TO_REGCLASS nodes.
Added lowering tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223804 91177308-0d34-0410-b5e6-96231b3b80d8
missing barcelona CPU which that test uncovered, and remove the 32-bit
x86 CPUs which I really wasn't prepared to audit and test thoroughly.
If anyone wants to clean up the 32-bit only x86 CPUs, go for it.
Also, if anyone else wants to try to de-duplicate the AMD CPUs, that'd
be cool, but from the looks of it wouldn't save as much as it did for
the Intel CPUs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223774 91177308-0d34-0410-b5e6-96231b3b80d8
Notably, this adds simple micro-architecture names for the Intel CPU
variants, and defines the old 'core'-based names as aliases. GCC has
started to simplify their documented interface to use these names as
well, so it seems like we can start to converge on a consistent pattern.
I'd appreciate Intel double checking the entries that aren't yet
documented widely, especially Atom (Bonnell and Silvermont), Knights
Landing, and Skylake. But this change shouldn't break any existing
users.
Also, ran clang-format to re-format this code and it actually worked
(modulo a tiny bug) so hopefully we can start to stop thinking about
formatting this stuff.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223769 91177308-0d34-0410-b5e6-96231b3b80d8
This handles the simplest case for mov -> push conversion:
1. x86-32 calling convention, everything is passed through the stack.
2. There is no reserved call frame.
3. Only registers or immediates are pushed, no attempt to combine a mem-reg-mem sequence into a single PUSHmm.
Differential Revision: http://reviews.llvm.org/D6503
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223757 91177308-0d34-0410-b5e6-96231b3b80d8
Fix a compact unwind encoding logic bug which would try to encode
more callee saved registers than it should, leading to early bail out
in the encoding logic and abusive use of DWARF frame mode unnecessarily.
Also remove no-compact-unwind.ll which was testing the wrong thing
based on this bug and move it to valid 'compact unwind' tests. Added
other few more tests too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223676 91177308-0d34-0410-b5e6-96231b3b80d8
Teach ISel how to match a TZCNT/LZCNT from a conditional move if the
condition code is X86_COND_NE.
Existing tablegen patterns only allowed to match TZCNT/LZCNT from a
X86cond with condition code equal to X86_COND_E. To avoid introducing
extra rules, I added an 'ImmLeaf' definition that checks if the
condition code is COND_E or COND_NE.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223668 91177308-0d34-0410-b5e6-96231b3b80d8
Before this patch, the backend sub-optimally expanded the non-constant shift
count of a v8i16 shift into a sequence of two 'movd' plus 'movzwl'.
With this patch the backend checks if the target features sse4.1. If so, then
it lets the shuffle legalizer deal with the expansion of the shift amount.
Example:
;;
define <8 x i16> @test(<8 x i16> %A, <8 x i16> %B) {
%shamt = shufflevector <8 x i16> %B, <8 x i16> undef, <8 x i32> zeroinitializer
%shl = shl <8 x i16> %A, %shamt
ret <8 x i16> %shl
}
;;
Before (with -mattr=+avx):
vmovd %xmm1, %eax
movzwl %ax, %eax
vmovd %eax, %xmm1
vpsllw %xmm1, %xmm0, %xmm0
retq
Now:
vpxor %xmm2, %xmm2, %xmm2
vpblendw $1, %xmm1, %xmm2, %xmm1
vpsllw %xmm1, %xmm0, %xmm0
retq
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223660 91177308-0d34-0410-b5e6-96231b3b80d8
X86ISelLowering.cpp has a long switch for intrinsics. I moved a part of
this long switch to the new intrinsics table in X86IntrinsicsInfo.h.
No functional changes, just code and compile time optimization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223641 91177308-0d34-0410-b5e6-96231b3b80d8
Fix the poor codegen seen in PR21710 ( http://llvm.org/bugs/show_bug.cgi?id=21710 ).
Before we crack 32-byte build vectors into smaller chunks (and then subsequently
glue them back together), we should look for the easy case where we can just load
all elements in a single op.
An example of the codegen change is:
From:
vmovss 16(%rdi), %xmm1
vmovups (%rdi), %xmm0
vinsertps $16, 20(%rdi), %xmm1, %xmm1
vinsertps $32, 24(%rdi), %xmm1, %xmm1
vinsertps $48, 28(%rdi), %xmm1, %xmm1
vinsertf128 $1, %xmm1, %ymm0, %ymm0
retq
To:
vmovups (%rdi), %ymm0
retq
Differential Revision: http://reviews.llvm.org/D6536
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223518 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Follow up to [x32] "Use ebp/esp as frame and stack pointer":
http://reviews.llvm.org/D4617
In that earlier patch, NaCl64 was made to always use rbp.
That's needed for most cases because rbp should hold a full
64-bit address within the NaCl sandbox so that load/stores
off of rbp don't require sandbox adjustment (zeroing the top
32-bits, then filling those by adding r15).
However, llvm.frameaddress returns a pointer and pointers
are 32-bit for NaCl64. In this case, use ebp instead, which
will make the register copy type check. A similar mechanism
may be needed for llvm.eh.return, but is not added in this change.
Test Plan: test/CodeGen/X86/frameaddr.ll
Reviewers: dschuff, nadav
Subscribers: jfb, llvm-commits
Differential Revision: http://reviews.llvm.org/D6514
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223510 91177308-0d34-0410-b5e6-96231b3b80d8
SSE2/AVX non-constant packed shift instructions only use the lower 64-bit of
the shift count.
This patch teaches function 'getTargetVShiftNode' how to deal with shifts
where the shift count node is of type MVT::i64.
Before this patch, function 'getTargetVShiftNode' only knew how to deal with
shift count nodes of type MVT::i32. This forced the backend to wrongly
truncate the shift count to MVT::i32, and then zero-extend it back to MVT::i64.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223505 91177308-0d34-0410-b5e6-96231b3b80d8
When lowering a vector shift node, the backend checks if the shift count is a
shuffle with a splat mask. If so, then it introduces an extra dag node to
extract the splat value from the shuffle. The splat value is then used
to generate a shift count of a target specific shift.
However, if we know that the shift count is a splat shuffle, we can use the
splat index 'I' to extract the I-th element from the first shuffle operand.
The advantage is that the splat shuffle may become dead since we no longer
use it.
Example:
;;
define <4 x i32> @example(<4 x i32> %a, <4 x i32> %b) {
%c = shufflevector <4 x i32> %b, <4 x i32> undef, <4 x i32> zeroinitializer
%shl = shl <4 x i32> %a, %c
ret <4 x i32> %shl
}
;;
Before this patch, llc generated the following code (-mattr=+avx):
vpshufd $0, %xmm1, %xmm1 # xmm1 = xmm1[0,0,0,0]
vpxor %xmm2, %xmm2
vpblendw $3, %xmm1, %xmm2, %xmm1 # xmm1 = xmm1[0,1],xmm2[2,3,4,5,6,7]
vpslld %xmm1, %xmm0, %xmm0
retq
With this patch, the redundant splat operation is removed from the code.
vpxor %xmm2, %xmm2
vpblendw $3, %xmm1, %xmm2, %xmm1 # xmm1 = xmm1[0,1],xmm2[2,3,4,5,6,7]
vpslld %xmm1, %xmm0, %xmm0
retq
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223461 91177308-0d34-0410-b5e6-96231b3b80d8
r32900 introduced custom lowering for fcopysign, with two checks to
change the magnitude value's type if it's larger/smaller than the sign
value's type. r32932 replaced that code for the smaller case.
r43205 did the same for the larger case, but left the old code, now dead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223415 91177308-0d34-0410-b5e6-96231b3b80d8
Offset == 0 is a valid offset for kernel code model according to the
x86_64 System V ABI. Found by inspection, no testcase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223383 91177308-0d34-0410-b5e6-96231b3b80d8
The current DAG combine turns a sequence of extracts from <4 x i32> followed by zexts into a store followed by scalar loads.
According to measurements by Martin Krastev (see PR 21269) for x86-64, a sequence of an extract, movs and shifts gives better performance. However, for 32-bit x86, the previous sequence still seems better.
Differential Revision: http://reviews.llvm.org/D6501
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223360 91177308-0d34-0410-b5e6-96231b3b80d8
Replaced some logic that checked if a build_vector node is doing a splat of a
non-undef value with a call to method BuildVectorSDNode::getSplatValue().
No functional change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223354 91177308-0d34-0410-b5e6-96231b3b80d8
I'm recommiting the codegen part of the patch.
The vectorizer part will be send to review again.
Masked Vector Load and Store Intrinsics.
Introduced new target-independent intrinsics in order to support masked vector loads and stores. The loop vectorizer optimizes loops containing conditional memory accesses by generating these intrinsics for existing targets AVX2 and AVX-512. The vectorizer asks the target about availability of masked vector loads and stores.
Added SDNodes for masked operations and lowering patterns for X86 code generator.
Examples:
<16 x i32> @llvm.masked.load.v16i32(i8* %addr, <16 x i32> %passthru, i32 4 /* align */, <16 x i1> %mask)
declare void @llvm.masked.store.v8f64(i8* %addr, <8 x double> %value, i32 4, <8 x i1> %mask)
Scalarizer for other targets (not AVX2/AVX-512) will be done in a separate patch.
http://reviews.llvm.org/D6191
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223348 91177308-0d34-0410-b5e6-96231b3b80d8
Commit on
- This patch fixes the bug described in
http://lists.cs.uiuc.edu/pipermail/llvmdev/2013-May/062343.html
The fix allocates an extra slot just below the GPRs and stores the base pointer
there. This is done only for functions containing llvm.eh.sjlj.setjmp that also
need a base pointer. Because code containing llvm.eh.sjlj.setjmp saves all of
the callee-save GPRs in the prologue, the offset to the extra slot can be
computed before prologue generation runs.
Impact at run-time on affected functions is::
- One extra store in the prologue, The store saves the base pointer.
- One extra load after a llvm.eh.sjlj.setjmp. The load restores the base pointer.
Because the extra slot is just above a gap between frame-pointer-relative and
base-pointer-relative chunks of memory, there is no impact on other offset
calculations other than ensuring there is room for the extra slot.
http://reviews.llvm.org/D6388
Patch by Arch Robison <arch.robison@intel.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223329 91177308-0d34-0410-b5e6-96231b3b80d8
Use the MCAsmInfo instead of the DataLayout, and allow
specifying a custom prefix for labels specifically. HSAIL
requires that labels begin with @, but global symbols with &.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223323 91177308-0d34-0410-b5e6-96231b3b80d8
