Summary:
The pattern sll/srl $rd, $rt, $rs is found in handwritten assembly which
is just a shorthand version of sllv/srlv $rd, $rt, $rs.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D3483
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207657 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Also renamed non-portable register names (e.g. $t2) so that we don't end up
with a different encoding for what appears to be an equivalent instruction.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D3505
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207655 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This directive is used for setting up $gp in the beginning of a function.
It expands to three instructions if PIC is enabled:
lui $gp, %hi(_gp_disp)
addui $gp, $gp, %lo(_gp_disp)
addu $gp, $gp, $reg
_gp_disp is a special symbol that the linker sets to the distance between
the lui instruction and the context pointer (_gp).
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D3480
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207637 91177308-0d34-0410-b5e6-96231b3b80d8
This enables TableGen to generate an additional two operand
matcher for our shift_rotate_imm and shift_rotate_reg class of instructions.
The tests were also updated so that they include now encoding information
for all affected instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206398 91177308-0d34-0410-b5e6-96231b3b80d8
This is so that EF_MIPS_NAN2008 is set if we are using IEEE 754-2008
NaN encoding (-mnan=2008). This patch also adds support for parsing
'.nan legacy' and '.nan 2008' assembly directives. The handling of
these directives should match GAS' behaviour i.e., the last directive
in use sets the ELF header bit (EF_MIPS_NAN2008).
Differential Revision: http://reviews.llvm.org/D3346
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206396 91177308-0d34-0410-b5e6-96231b3b80d8
This was most likely caused by an uninitialized value and the relevant code was re-written in r205292. Reverting to see if it still fails on any of the buildbots.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206033 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
It is now the smallest superset for these ISA's.
FeatureMips4 now contains FeatureFPIdx since [ls][dw]xc1 were added in MIPS-IV.
Made the FPIdx feature bit lowercase so that it can be used in the -mattr option.
Depends on D3274
Reviewers: matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://reviews.llvm.org/D3275
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205964 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
test/MC/Mips/<isa1>/invalid-<isa2>.s
Test that <isa1> does not support <isa2>'s instructions.
test/MC/Mips/<isa1>/invalid-<isa2>-xfail.s
Things that should be invalid but currently aren't. Will XPASS if any
become invalid.
Reviewers: matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D3262
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205538 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Adds the 'mips4' processor and a simple test of the ELF e_flags.
Patch by David Chisnall
His work was sponsored by: DARPA, AFRL
I made one small change to the testcase so that it uses
mips64-unknown-linux instead of mips4-unknown-linux.
This patch indirectly adds FeatureCondMov to FeatureMips64. This is ok
because it's supposed to be there anyway and it turns out that
FeatureCondMov is not a predicate of any instructions at the moment
(this is a bug that hasn't been noticed because there are no targets
without the conditional move instructions yet).
CC: theraven
Differential Revision: http://llvm-reviews.chandlerc.com/D3244
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205530 91177308-0d34-0410-b5e6-96231b3b80d8
%highest(sym1 - sym2 + const) relocations. Remove "ABS_" from VK_Mips_HI
and VK_Mips_LO enums in MipsMCExpr, to be consistent with VK_Mips_HIGHER
and VK_Mips_HIGHEST.
This change also deletes test file test/MC/Mips/higher_highest.ll and moves
its CHECK's to the new test file test/MC/Mips/higher-highest-addressing.s.
The deleted file tests that R_MIPS_HIGHER and R_MIPS_HIGHEST relocations are
emitted in the .o file. Since it uses -force-mips-long-branch option, it was
created when MipsLongBranch's implementation was emitting R_MIPS_HIGHER and
R_MIPS_HIGHEST relocations in the .o file. It was disabled when MipsLongBranch
started to directly calculate offsets.
Differential Revision: http://llvm-reviews.chandlerc.com/D3230
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205522 91177308-0d34-0410-b5e6-96231b3b80d8
Adds the instructions ext/ext32/cins/cins32.
It also changes pop/dpop to accept the two operand version and
adds a simple pattern to generate baddu.
Tests for the two operand versions (including baddu/dmul/dpop/pop)
and the code generation pattern for baddu are included.
Reviewed by: Daniel.Sanders@imgtec.com
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205449 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This should fix the issues the D3222 caused in lld. Testcase is based on
the one that failed in the buildbot.
Depends on D3233
Reviewers: matheusalmeida, vmedic
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D3234
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205298 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Highlights:
- Registers are resolved much later (by the render method).
Prior to that point, GPR32's/GPR64's are GPR's regardless of register
size. Similarly FGR32's/FGR64's/AFGR64's are FGR's regardless of register
size or FR mode. Numeric registers can be anything.
- All registers are parsed the same way everywhere (even when handling
symbol aliasing)
- One consequence is that all registers can be specified numerically
almost anywhere (e.g. $fccX, $wX). The exception is symbol aliasing
but that can be easily resolved.
- Removes the need for the hasConsumedDollar hack
- Parenthesis and Bracket suffixes are handled generically
- Micromips instructions are parsed directly instead of going through the
standard encodings first.
- rdhwr accepts all 32 registers, and the following instructions that previously
xfailed now work:
ddiv, ddivu, div, divu, cvt.l.[ds], se[bh], wsbh, floor.w.[ds], c.ngl.d,
c.sf.s, dsbh, dshd, madd.s, msub.s, nmadd.s, nmsub.s, swxc1
- Diagnostics involving registers point at the correct character (the $)
- There's only one kind of immediate in MipsOperand. LSA immediates are handled
by the predicate and renderer.
Lowlights:
- Hardcoded '$zero' in the div patterns is handled with a hack.
MipsOperand::isReg() will return true for a k_RegisterIndex token
with Index == 0 and getReg() will return ZERO for this case. Note that it
doesn't return ZERO_64 on isGP64() targets.
- I haven't cleaned up all of the now-unused functions.
Some more of the generic parser could be removed too (integers and relocs
for example).
- insve.df needed a custom decoder to handle the implicit fourth operand that
was needed to make it parse correctly. The difficulty was that the matcher
expected a Token<'0'> but gets an Imm<0>. Adding an implicit zero solved this.
Reviewers: matheusalmeida, vmedic
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D3222
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205292 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Highlights:
- Registers are resolved much later (by the render method).
Prior to that point, GPR32's/GPR64's are GPR's regardless of register
size. Similarly FGR32's/FGR64's/AFGR64's are FGR's regardless of register
size or FR mode. Numeric registers can be anything.
- All registers are parsed the same way everywhere (even when handling
symbol aliasing)
- One consequence is that all registers can be specified numerically
almost anywhere (e.g. $fccX, $wX). The exception is symbol aliasing
but that can be easily resolved.
- Removes the need for the hasConsumedDollar hack
- Parenthesis and Bracket suffixes are handled generically
- Micromips instructions are parsed directly instead of going through the
standard encodings first.
- rdhwr accepts all 32 registers, and the following instructions that previously
xfailed now work:
ddiv, ddivu, div, divu, cvt.l.[ds], se[bh], wsbh, floor.w.[ds], c.ngl.d,
c.sf.s, dsbh, dshd, madd.s, msub.s, nmadd.s, nmsub.s, swxc1
- Diagnostics involving registers point at the correct character (the $)
- There's only one kind of immediate in MipsOperand. LSA immediates are handled
by the predicate and renderer.
Lowlights:
- Hardcoded '$zero' in the div patterns is handled with a hack.
MipsOperand::isReg() will return true for a k_RegisterIndex token
with Index == 0 and getReg() will return ZERO for this case. Note that it
doesn't return ZERO_64 on isGP64() targets.
- I haven't cleaned up all of the now-unused functions.
Some more of the generic parser could be removed too (integers and relocs
for example).
- insve.df needed a custom decoder to handle the implicit fourth operand that
was needed to make it parse correctly. The difficulty was that the matcher
expected a Token<'0'> but gets an Imm<0>. Adding an implicit zero solved this.
Reviewers: matheusalmeida, vmedic
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D3222
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205229 91177308-0d34-0410-b5e6-96231b3b80d8
%got_hi, %got_lo, %call_hi, %call_lo, %higher, and %highest are now recognised
by MipsAsmParser::getVariantKind().
To prevent future issues with missing entries in this StringSwitch, I've added
an assertion to the default case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205200 91177308-0d34-0410-b5e6-96231b3b80d8
Unlike my previous commit, don't try to remove the corresponding VK_Mips_GOT yet
even though it shares the same assembly text since that is used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205196 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Where those ISA's are not currently supported, the test is run with the smallest
superset of that ISA.
Some instructions are valid but don't pass yet. These have been placed in the
valid-xfail.s's which will XPASS if _any_ instruction starts working.
The valid.s's do not verify the encoding yet. There are also no tests checking that instructions from neighbouring ISA's are not accepted.
Reviewers: matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D3214
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205180 91177308-0d34-0410-b5e6-96231b3b80d8
It was using "lc -filetype=obj" just to pass the result to
"llvm-objdupm -disassemble" and then filecheck assembly.
The CHECK-NOT would never match anyway since it was missing $.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205036 91177308-0d34-0410-b5e6-96231b3b80d8
This enables TableGen to generate an additional two operand matcher
for our ArithLogicR class of instructions (constituted by 3 register operands).
E.g.: and $1, $2 <=> and $1, $1, $2
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204826 91177308-0d34-0410-b5e6-96231b3b80d8
The '.dword' directive accepts a list of expressions and emits
them in 8-byte chunks in successive locations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204822 91177308-0d34-0410-b5e6-96231b3b80d8
The '.set mips64' directive enables the feature Mips:FeatureMips64
from assembly. Note that it doesn't modify the ELF header as opposed
to the use of -mips64 from the command-line. The reason for this
is that we want to be as compatible as possible with existing assemblers
like GAS.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204817 91177308-0d34-0410-b5e6-96231b3b80d8
The '.set mips64r2' directive enables the feature Mips:FeatureMips64r2
from assembly. Note that it doesn't modify the ELF header as opposed
to the use of -mips64r2 from the command-line. The reason for this
is that we want to be as compatible as possible with existing assemblers
like GAS.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204815 91177308-0d34-0410-b5e6-96231b3b80d8
The directive '.option pic2' enables PIC from assembly source.
At the moment none of the macros/directives check the PIC bit
but that's going to be fixed relatively soon. For example, the
expansion of macros like 'la' depend on the relocation model.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204803 91177308-0d34-0410-b5e6-96231b3b80d8
These are aliases of t4-t7 and are provided for compatibility with both the
original ABI documentation (using t4-t7) and GNU As (using t0-t3)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204797 91177308-0d34-0410-b5e6-96231b3b80d8
This reveals a small mistake in mips-register-names.s ($sp is tested twice and
$s8 is not tested) which will be fixed in a follow-up commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204792 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Remove the XFAIL added in my previous commit and correct the test such that
it correctly tests the expansion of the assembler temporary.
Also added a test to check that $at is always $1 when written by the
user.
Corrected the new assembler temporary warnings so that they are emitted for
numeric registers too.
Differential Revision: http://llvm-reviews.chandlerc.com/D3169
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204711 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The assembler temporary is normally $at ($1) but can be reassigned using
'.set at=$reg'. Regardless of which register is nominated as the assembler
temporary, $at remains $1 when written by the user.
Adds warnings under the following conditions:
* The register nominated as the assembler temporary is used by the user.
* '.set noat' is in effect and $at is used by the user.
Both of these only work for named registers. I have a follow up commit that makes it work for numeric registers as well.
XFAIL set-at-directive.s since it incorrectly tests that $at is redefined by
'.set at=$reg'. Testcases will follow in a separate commit.
Patch by David Chisnall
His work was sponsored by: DARPA, AFRL
Differential Revision: http://llvm-reviews.chandlerc.com/D3167
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204710 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
- If only two registers are passed to a three-register operation, then the
first argument is both source and destination register.
- If a non-register is passed as the last argument, generate the immediate
version of the instruction.
Also mark DADD commutative and add scheduling information (to the generic
scheduler), and implement DSUB.
Patch by David Chisnall
His work was sponsored by: DARPA, AFRL
CC: theraven
Differential Revision: http://llvm-reviews.chandlerc.com/D3148
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204605 91177308-0d34-0410-b5e6-96231b3b80d8
The Octeon cpu from Cavium Networks is mips64r2 based and has an extended
instruction set. In order to utilize this with LLVM, a new cpu feature "octeon"
and a subtarget feature "cnmips" is added. A small set of new instructions
(baddu, dmul, pop, dpop, seq, sne) is also added. LLVM generates dmul, pop and
dpop instructions with option -mcpu=octeon or -mattr=+cnmips.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204337 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This removes the need to coerce UnknownABI to the default ABI (O32 for
MIPS32, N64 for MIPS64 [*]) in both MipsSubtarget and MipsAsmParser.
Clang has been updated to disable both possible default ABI's before enabling
the ABI it intends to use.
[*] N64 being the default for MIPS64 is not actually correct.
However N32 is not fully implemented/tested yet.
Depends on: D2830
Reviewers: jacksprat, matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D2832
Differential Revision: http://llvm-reviews.chandlerc.com/D2846
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201792 91177308-0d34-0410-b5e6-96231b3b80d8
To remove this one simply move the end of file logic from the asm printer to
the target mc streamer.
This removes the last call to hasRawTextSupport from lib/Target.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200590 91177308-0d34-0410-b5e6-96231b3b80d8
As opposed to GCC/GAS the default ABI for Mips64 is n64.
Compatibility bit should be set if o32 ABI is used when targeting Mips64.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200332 91177308-0d34-0410-b5e6-96231b3b80d8
These were:
* noreorder handling on the target object streamer and asm parser.
* setting the initial flag bits based on the enabled features.
* setting the elf header flag for micromips
It is *really* depressing I am the one doing this instead of someone at
mips actually taking the time to understand the infrastructure.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200138 91177308-0d34-0410-b5e6-96231b3b80d8
r200064 depends on r200051.
r200051 is broken: I tries to replace .mips_hack_elf_flags, which is a good
thing, but what it replaces it with is even worse.
The new emitMipsELFFlags it adds corresponds to no assembly directive, is not
marked as a hack and is not even printed to the .s file.
The patch also introduces more uses of hasRawTextSupport.
The correct way to remove .mips_hack_elf_flags is to have the mips target
streamer handle the default flags (and command line options). That way the
same code path is used for asm and obj. The streamer interface should *really*
correspond to what is printed in the .s file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200078 91177308-0d34-0410-b5e6-96231b3b80d8
This patch uses a common MipsTargetSteamer interface for both
MipsAsmPrinter and MipsAsmParser for recording default and commandline
driven directives that affect ELF header flags.
It has been noted that the .ll tests affected by this patch belong in
test/Codegen/Mips. I will move them in a separate patch.
Also, a number of directives do not get expressed by AsmPrinter in the
resultant .s assembly such as setting the correct ASI. I have noted this
in the tests and they will be addressed in later patches.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200051 91177308-0d34-0410-b5e6-96231b3b80d8
This patch updates .set mips16 support which
affects the ELF ABI and its flags. In addition the patch uses
a common interface for both the MipsTargetSteamer and
MipsObjectStreamer that the assembler uses for
both ELF and ASCII output for these directives.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199851 91177308-0d34-0410-b5e6-96231b3b80d8
The GNU as behavior is a bit different and very strange. It will mark any
label that contains an instruction. We can implement that, but using the
type looks more natural since gas will not mark a function if a .word is
used to output the instructions!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199287 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds .abicalls and .set pic0 support which
affects the ELF ABI and its flags. In addition the patch uses
a common interface for both the MipsTargetSteamer and
MipsObjectStreamer that both the integrated and standalone
assemblers will use for the output for these directives.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198646 91177308-0d34-0410-b5e6-96231b3b80d8
