pci_conv_rd_data can be used to handle unaligned or 64-bit accesses in mmio regions if it's modified to include the next 32-bit value.
For pci config accesses, grackle repeats the 32-bit value. bandit uses a seemingly random number for the next 32-bit value, but we'll make it work like grackle.
PCCard is used by PowerBook G3 Wallstreet in Open Firmware 2.0.1.
CardBus is probed in New World Macs starting from at least Open Firmware 4.1.9f1 sometime after Open Firmware 3.1.1.
- Create PCIBase from common stuff in PCIDevice.
- Add PCIBridgeBase. These have a primary bus number, secondary bus number, and subordinate bus number which are used to determine if PCI type 1 config cycle should be passed.
- Change PCIBridge to use PCIBridgeBase instead of PCIDevice.
- Add PCICardBusBridge which uses PCIBridgeBase.
Result of running IWYU (https://include-what-you-use.org/) and
applying most of the suggestions about unncessary includes and
forward declarations.
Was motivated by observing that <thread> was being included in
ppcopcodes.cpp even though it was unused (found while researching
the use of threads), but seems generally good to help with build
times and correctness.
PCIDevice
- supports_io_space method now uses a flag has_io_space which is automatically set for PCI bridges or PCI devices that have an I/O BAR.
atirage
- Devices that have I/O BARs don't need a supports_io_space method.
mpc106
- Devices that don't have I/O methods don't need a supports_io_space method.
Add PCI bridge and multi-function device support.
Overview:
- A multi-function device is two or more PCIDevices with the same device number but one device is function zero (as with currently implemented PCIDevices) and the other functions have function numbers between 1 and 7. The device number and function number are properties of the PCIDevice's parent PCIHost connection.
- A PCIBridge is a PCIHost (it can connect child PCI devices) and a PCIDevice (it has config space, BARs, and expansion ROM).
- A PCIDevice has Type 0 header. It has 6 BARs.
- A PCIBridge has Type 1 header. It has 2 BARs. The config space registers beginning from offset 0x18 differ from those of a PCIDevice.
Possible future modifications:
- Add a PCICardBus class. It is a PCIHost. It has Type 2 header. It has one BAR. The first 20 bytes match Type 0 and Type 1 headers. These exist in New World Macs. They allow hot-plug of PCI devices.
- Split base PCI registers (first 16 bytes) into a PCIBase class. Type 1 and 2 have two or one BAR but I think all 6 BARs belong in PCIBase class anyway.
- Split PCIHost into two classes: Currently existing PCIHosts (Bandit, Grackle) are PCIHost and PCIRoot (they have the broadcast I/O requests functionality) while PCIBridge is PCIHost only - it can propagate I/O requests but does not originate the broadcast.
- pci_register_mmio_region should maybe return a pointer to a region struct so that it can be used for unregistering or modifying the region's range. This may be useful for PCI bridges which have ranges that may constrain memory BARs of their downstream devices.
PCIDevice
- Moved expansion ROM BAR handling to a separate function pci_wr_exp_rom_bar so that it can be used by both PCI devices and PCI bridges which have the ROM BAR in different locations. It now supports unmapping expansion ROM. Also made exp_rom_bar not writable if there's no ROM.
- Added num_bars field which specifies the number of valid BARs since Type 0, 1, and 2 headers have different number of BARs.
- map_exp_rom_mem now properly unmaps expansion ROM (using new function unmap_exp_rom_mem) before mapping it again.
- Added function set_multi_function which modifies hdr_type to indicate if a device has other functions. This is to be applied only to devices with function number 0.
PCIHost
- When attaching a PCI device, it will check if it's a multi-function device (there exists an attached function that is not zero) and adjust hdr_type of function 0 of the device accordingly.
- Attached PCI bridges are added to a list of PCI bridges attached to the host.
- Added pci_io_read_loop and pci_io_write_loop which loop through attached PCI devices to find one that will perform the action for the given I/O address without logging an error (since some other device might perform the action).
- Added pci_io_read_broadcast and pci_io_write_broadcast which are used by a PCI root (bandit/grackle). They will log an error if the action is not performed. They should probably do a machine check exception to match real Power Macs.
- pci_find_device (used by PCI root) will recursively find a PCIDevice for type 1 config register accesses.
- Logging from PCIHost now includes the name of the PCIHost instead of just "PCIHost" because there can be multiple PCI hosts.
PCIBridge
- Sets num_bars to 2 and hdr_type to 1.
- I/O ranges set in the config registers are handled correctly by pci_io_read and pci_io_write.
- Memory ranges set in the config registers do not currently affect memory mmio regions. It is assumed that Open Firmware and the OS will set the ranges and BARs correctly to allow all BARs to be accessed fully.
bandit, mpc106
- Bandit and Grackle now call pci_io_read_broadcast and pci_io_read_broadcast to pass I/O accesses to downstream PCI devices.
- Chaos is modified to work like Bandit even though it will never have PCI bridges attached or devices that support I/O accesses. It's simpler this way.
PCIHost
- PCIHosts (bandit and grackle) now use device number and function number for identifying attached PCIDevices. A macro DEV_FUN is added to calculate this new slot_id. Bandit no longer uses IDSEL. Grackle no longer uses only device number.
machinecatalyst, machinegossamer, machinetnt
- Use DEV_FUN to attach PCI devices by device number and function number.
- Macros need parenthesis to enforce operation order when expanded.
- Fix device and register numbers in log messages.
- Unmapped I/O space reads don't necessarily return 0xffffffff. That's only for config space reads. Just return 0. Unhandled I/O space read should probably cause a memory check (TEA - Transfer Error Acknowledge) exception as it does on a Power Mac 8600.
dingusppc could not read bytes from offset 1,2,3 or words from offset 2.
dingusppc did not read words from offset 1,3 and longs from offset 1,2,3 in the same way as a real Power Mac 8600 or B&W G3.
This commit fixes those issues.
- Added pci_cfg_rev_read. It takes a 32 bit value from offset 0 and returns a value of the specified size using bytes starting from the specified offset. Offsets 4,5, & 6 wrap around to 0,1, & 2 respectively. The result bytes are in flipped order as required by the read method (so a value of 0x12345678 is returned as 0x78563412)
A real Power Mac 8600 might return a random byte for offset 4, 5, 6 for vci0 but usually not for pci1. A B&W G3 seems to always wrap around correctly. We won't read random bytes, and we won't read a default such as 00 or FF. We'll do the wrap around which makes the most sense because writing 0x12345678 to any offset and reading from the same offset should produce the value that was written.
- Added pci_cfg_rev_write. It takes a 32 bit value from offset 0, and modifies a specified number of bytes starting at a specified offset with the offset wrapping around to 0 if it exceeds 3. The modified bytes take their new values from the flipped bytes passed to pci_cfg_write. When size is 4, the original value is not used since all bytes will be modified.
Basically, those two functions handle all the sizes and all the offsets and replace calls to BYTESWAP_32, read_mem or read_mem_rev, and write_mem or write_mem_rev.
read_mem_rev, as it was used by pcidevice and some other places, could read beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always read the wrong byte or word if they were not at offset 0. Same for read_mem as used by mpc106.
write_mem_rev, as it was used by pcidevice and some other places, could write beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always write the wrong byte or word if they were not at offset 0. Same for write_mem as used by mpc106.
pcidevice:
- The logging macros should be used to handle all config register access logging.
- Unaligned PCI config register accesses will be output as ERROR instead of WARNING.
- The logging macros include the offset and size. They also include the value for named registers or for writes.
- Added MMIODevice read and write methods so that PCIDevice is not abstract if a PCIDevice doesn't override the read and write method since some PCIDevices don't have MMIO.
pcihost:
- Added pci_find_device stub for handling PCI bridges in future commit.
bandit and mpc106:
- PCI host controllers will handle all PCI config access alignment and sizing. A PCIDevice will always access config registers as 32 bits on a 4 byte boundary. The AccessDetails passed to a PCIDevice config read or write method is there only for logging purposes.
bandit:
- Common MMIO code is moved to new BanditHost class so both Bandit and Chaos can use it. PCI related code is moved to new BanditPCI class.
- Simplify IDSEL to/from PCI device number conversion by removing the shift or subtract.
- Remove BANDIT_ID_SEL check. The IDSEL conversion to PCI device number can find the bandit PCI device.
- For logging, make best guess of PCI device number from invalid IDSEL - the result is always reasonable for device 0x00 to 0x0A when accessing config register 0x00 (as one would do when scanning for PCI devices like lspci does).
mpc106:
- Common config space code is put in cfg_setup. It handles extracting the offset.
- Added code to log access to unimplemented config registers of grackle.
- Don't call setup_ram when writing to config registers that setup_ram doesn't use.
- pci_cfg_read calls READ_DWORD_LE_A and pci_cfg_write calls WRITE_DWORD_LE_A. When reading or writing memory that is organized as little endian dwords, such as my_pci_cfg_hdr of mpc106, the function should explicitly state that it's little endian so that the emulator may be ported one day to a CPU architecture that is not little endian.
atirage:
- The changes correctly place user_cfg at byte 0x40 instead of 0x43 and writes the correct byte depending on size and offset.
It might not be an error - usually it just means that it was already allocated so demote this message to a warning.
Related memory allocation changes:
- Added find_range_exact which searches for an allocation that exactly matches a range.
- Added find_range_contains which searches for an allocation that is completely contained within a range.
- Added find_range_overlaps which searches for an allocation that overlaps any part of a range.
- Added is_range_free which is similar to the above three. It returns false if any allocated range overlaps a range. It reports the regions that it overlaps.
- Fix add_mem_region and add_memio_region so that they don't just check the first byte and last byte.
- Memory allocation logging should include the range (first byte..last byte) and device if possible.
- Log memory allocations.
First, remove name override for subclasses of HWComponent (Chaos and ScsiBus) because HWComponent has its own name field.
HWComponent name should be set as early as possible in the constructor so it can be used in log messages.
PCIDevice should set name of HWComponent (through MMIODevice) in its constructor, using the name that is given to its constructor.
For Bandit and Grackle, they don't need to set the HWComponent name since its PCIDevice constructor will now do it.
Chaos is not a PCIDevice so it should set the MMIODevice name itself.
Why does PCIDevice have a name that is separate from the HWComponent name?
Writes to config registers of invalid or non-existent PCI devices are logged. They should be logged with most significant byte first.
The values enter the methods in reverse byte order so they need to be byte swapped (except when size is 1) for logging.
The result is that this command in Open Firmware:
`12345678 16800 config-l!`
will log this:
`VCI0 err: write attempt to non-existing VCI device ??:0d.0 @00.l = 12345678`
dingusppc could not read bytes from offset 1,2,3 or words from offset 2.
dingusppc did not read words from offset 1,3 and longs from offset 1,2,3 in the same way as a real Power Mac 8600 or B&W G3.
This commit fixes those issues.
- Added pci_cfg_rev_read. It takes a 32 bit value from offset 0 and returns a value of the specified size using bytes starting from the specified offset. Offsets 4,5, & 6 wrap around to 0,1, & 2 respectively. The result bytes are in flipped order as required by the pci_cfg_read method (so a value of 0x12345678 is returned as 0x78563412)
A real Power Mac 8600 might return a random byte for offset 4, 5, 6 for vci0 but usually not for pci1. A B&W G3 seems to always wrap around correctly. We won't read random bytes, and we won't read a default such as 00 or FF. We'll do the wrap around which makes the most sense because writing 0x12345678 to any offset and reading from the same offset should produce the value that was written.
- Added pci_cfg_rev_write. It takes a 32 bit value from offset 0, and modifies a specified number of bytes starting at a specified offset with the offset wrapping around to 0 if it exceeds 3. The modified bytes take their new values from the flipped bytes passed to pci_cfg_write. When size is 4, the original value is not used since all bytes will be modified.
Basically, those two functions handle all the sizes and all the offsets and replace calls to BYTESWAP_32, read_mem or read_mem_rev, and write_mem or write_mem_rev.
read_mem_rev, as it was used by pcidevice and some other places, could read beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always read the wrong byte or word if they were not at offset 0. Same for read_mem as used by mpc106.
write_mem_rev, as it was used by pcidevice and some other places, could write beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always write the wrong byte or word if they were not at offset 0. Same for write_mem as used by mpc106.
The PCI controllers (bandit, chaos, mpc106) need to encode the offset (0,1,2,3) into the reg_offs parameter passed to pci_cfg_read and pci_cfg_write so they can return or modify the correct bytes of the dword at reg_offs & 3.
The pci_cfg_read and pci_cfg_write methods extract the offset from reg_offs and report unaligned accesses.
pci_cfg_read uses pci_cfg_rev_read to read from the reg using the size and offset to determine which bytes to read.
pci_cfg_write uses pci_cfg_rev_write to write to the reg using the size and offset to determine which bytes to modify.
Other changes:
- for unimplemented config register reads and writes, bandit and ATIRage now includes offset and size (and value in the case of writes) in log warnings.
- for unimplemented config register reads and writes, pcidevice now includes offset in log warnings.
- pci_read and pci_write of mpc106 require an offset parameter since config_addr does not contain the offset (it is always a multiple of 4). The offset is included in the log warninings for non-existent PCI devices.
- ATIRage uses pci_cfg_rev_read and pci_cfg_rev_write which correctly places user_cfg at byte 0x40 instead of 0x43 and writes the correct byte depending on size and offset.
Notes:
- pci_cfg_read calls READ_DWORD_LE_A and pci_cfg_write calls WRITE_DWORD_LE_A. When reading or writing memory that is organized as little endian dwords, such as my_pci_cfg_hdr of mpc106, the function should explicitly state that it's little endian so that the emulator may be ported one day to a CPU architecture that is not little endian.
Writes to config registers of invalid or non-existent PCI devices are logged. They should be logged with most significant byte first.
The values enter the methods in reverse byte order so they need to be byte swapped (except when size is 1) for logging.
The result is that this command in Open Firmware:
`12345678 16800 config-l!`
will log this:
`VCI0 err: write attempt to non-existing VCI device ??:0d.0 @00.l = 12345678`
PCI config read fails should return all 1 bits.
All unused registers in an existing PCI device should return 0.
Because that's what my Power Mac 8600 returns when I run my Open Firmware lspci command.
Any bus/device/function that doesn't exist returns FF and won't be listed by lspci.
Any registers that are unused will show as 00 in the lspci output.
Make grackle log bus:device.function @register.size in all cases.
For invalid or unsupported PCI accesses, do the following:
- log a device's full pci address using pciutils setpci command format bb:dd.f @rr.s (bus:device:function @register+offset.size).
- report as read or write access.
- log value for writes.
- bus, device, function, and register values cannot be determined from Invalid IDSEL values so they will output as ??.
- for invalid IDSEL values, report the entire value of the config_addr.
- for valid IDSEL values, the bus number cannot be determined since IDSEL only specifies device number. It's probably bus 00 but we'll show ?? to indicate an IDSEL type access.
Add missing config type read access logging for chaos.
