CLK/Machines/Apple/AppleIIgs/MemoryMap.hpp

//
//  MemoryMap.hpp
//  Clock Signal
//
//  Created by Thomas Harte on 25/10/2020.
//  Copyright © 2020 Thomas Harte. All rights reserved.
//

#ifndef Machines_Apple_AppleIIgs_MemoryMap_hpp
#define Machines_Apple_AppleIIgs_MemoryMap_hpp

#include <array>
#include <bitset>
#include <vector>

#include "../AppleII/LanguageCardSwitches.hpp"
#include "../AppleII/AuxiliaryMemorySwitches.hpp"

namespace Apple::IIgs {

class MemoryMap {
	private:
		using PagingType = Apple::II::PagingType;

	public:
		// MARK: - Initial construction and configuration.

		MemoryMap(bool is_rom03) : auxiliary_switches_(*this), language_card_(*this) {
			setup_shadow_maps(is_rom03);
		}

		void set_storage(std::vector<uint8_t> &ram, std::vector<uint8_t> &rom) {
			// Keep a pointer for later; also note the proper RAM offset.
			ram_base = ram.data();
			shadow_base[0] = ram_base;						// i.e. all unshadowed writes go to where they've already gone (to make a no-op).
			shadow_base[1] = &ram[ram.size() - 0x02'0000];	// i.e. all shadowed writes go somewhere in the last
															// 128bk of RAM.

			// Establish bank mapping.
			uint8_t next_region = 0;
			auto region = [&]() -> uint8_t {
				assert(next_region != this->regions.size());
				return next_region++;
			};
			auto set_region = [this](uint8_t bank, uint16_t start, uint16_t end, uint8_t region) {
				assert((end == 0xffff) || !(end&0xff));
				assert(!(start&0xff));

				// Fill in memory map.
				size_t target = size_t((bank << 8) | (start >> 8));
				for(int c = start; c < end; c += 0x100) {
					region_map[target] = region;
					++target;
				}
			};
			auto set_regions = [set_region, region](uint8_t bank, std::initializer_list<uint16_t> addresses, std::vector<uint8_t> allocated_regions = {}) {
				uint16_t previous = 0x0000;
				auto next_region = allocated_regions.begin();
				for(uint16_t address: addresses) {
					set_region(bank, previous, address, next_region != allocated_regions.end() ? *next_region : region());
					previous = address;
					assert(next_region != allocated_regions.end() || allocated_regions.empty());
					if(next_region != allocated_regions.end()) ++next_region;
				}
				assert(next_region == allocated_regions.end());
			};

			// Current beliefs about the IIgs memory map:
			//
			//	* language card banking applies to banks $00, $01, $e0 and $e1;
			//	* auxiliary memory switches apply to bank $00 only;
			//	* shadowing may be enabled only on banks $00 and $01, or on all RAM pages; and
			//	* whether bit 16 of the address is passed to the Mega II is selectable — this affects both the destination
			//	of odd-bank shadows, and whether bank $e1 is actually distinct from $e0.
			//
			// So:
			//
			//	* bank $00 needs to be divided by auxiliary and language card zones;
			//	* banks $01, $e0 and $e1 need to be divided by language card zones only; and
			//	* ROM banks and all other fast RAM banks don't need subdivision.

			// Language card zones:
			//
			//	$D000–$E000	4kb window, into either bank 1 or bank 2
			//	$E000–end	12kb window, always the same RAM.

			// Auxiliary zones:
			//
			//	$0000–$0200	Zero page (and stack)
			//	$0200–$0400	[space in between]
			//	$0400–$0800	Text Page 1
			//	$0800–$2000	[space in between]
			//	$2000–$4000	High-res Page 1
			//	$4000–$C000	[space in between]

			// Card zones:
			//
			//	$C100–$C2FF	either cards or IIe-style ROM
			//	$C300–$C3FF	IIe-supplied 80-column card replacement ROM
			//	$C400–$C7FF either cards or IIe-style ROM
			//	$C800–$CFFF	Standard extended card area

			// Reserve region 0 as that for unmapped memory.
			region();

			// Bank $00: all locations potentially affected by the auxiliary switches or the
			// language switches.
			set_regions(0x00, {
				0x0200,	0x0400,	0x0800,
				0x2000,	0x4000,
				0xc000,	0xc100,	0xc300,	0xc400,	0xc800,
				0xd000,	0xe000,
				0xffff
			});

			// Bank $01: all locations potentially affected by the language switches and card switches.
			set_regions(0x01, {
				0xc000,	0xc100,	0xc300,	0xc400,	0xc800,
				0xd000,	0xe000,
				0xffff
			});

			// Banks $02–[end of RAM]: a single region.
			const auto fast_region = region();
			const uint8_t fast_ram_bank_limit = uint8_t(ram.size() / 0x01'0000);
			for(uint8_t bank = 0x02; bank < fast_ram_bank_limit; bank++) {
				set_region(bank, 0x0000, 0xffff, fast_region);
			}

			// [Banks $80–$e0: empty].

			// Banks $e0, $e1: all locations potentially affected by the language switches or marked for IO.
			// Alas, separate regions are needed due to the same ROM appearing on both pages.
			for(uint8_t c = 0; c < 2; c++) {
				set_regions(0xe0 + c, {0xc000, 0xc100, 0xc300, 0xc400, 0xc800, 0xd000, 0xe000, 0xffff});
			}

			// [Banks $e2–[ROM start]: empty].

			// ROM banks: directly mapped to ROM.
			const uint8_t rom_bank_count = uint8_t(rom.size() >> 16);
			const uint8_t first_rom_bank = uint8_t(0x100 - rom_bank_count);
			const uint8_t rom_region = region();
			for(uint8_t c = 0; c < rom_bank_count; ++c) {
				set_region(first_rom_bank + c, 0x0000, 0xffff, rom_region);
			}

			// Apply proper storage to those banks.
			auto set_storage = [this](uint32_t address, const uint8_t *read, uint8_t *write) {
				// Don't allow the reserved null region to be modified.
				assert(region_map[address >> 8]);

				// Either set or apply a quick bit of testing as to the logic at play.
				auto &region = regions[region_map[address >> 8]];
				if(read) read -= address;
				if(write) write -= address;
				if(!region.read) {
					region.read = read;
					region.write = write;
				} else {
					assert(region.read == read);
					assert(region.write == write);
				}
			};

			// This is highly redundant, but decouples this step from the above.
			for(size_t c = 0; c < 0x80'0000; c += 0x100) {
				if(c < ram.size() - 0x02'0000) {
					set_storage(uint32_t(c), &ram[c], &ram[c]);
				}
			}
			uint8_t *const slow_ram = &ram[ram.size() - 0x02'0000] - 0xe0'0000;
			for(size_t c = 0xe0'0000; c < 0xe2'0000; c += 0x100) {
				set_storage(uint32_t(c), &slow_ram[c], &slow_ram[c]);
			}
			for(uint32_t c = 0; c < uint32_t(rom_bank_count); c++) {
				set_storage((first_rom_bank + c) << 16, &rom[c << 16], nullptr);
			}

			// Set shadowing as working from banks 0 and 1 (forever).
			shadow_banks[0] = true;

			// TODO: set 1Mhz flags.

			// Apply initial language/auxiliary state.
			set_paging<~0>();
		}

		// MARK: - Live bus access notifications and register access.

		void set_shadow_register(uint8_t value) {
			const uint8_t diff = value ^ shadow_register_;
			shadow_register_ = value;

			if(diff & 0x40) {	// IO/language-card inhibit.
				set_paging<PagingType::LanguageCard | PagingType::CardArea>();
			}

			if(diff & 0x3f) {
				set_shadowing();
			}
		}

		uint8_t get_shadow_register() const {
			return shadow_register_;
		}

		void set_speed_register(uint8_t value) {
			speed_register_ = value;

			// Enable or disable shadowing from banks 0x02–0x80.
			for(size_t c = 0x01; c < 0x40; c++) {
				shadow_banks[c] = speed_register_ & 0x10;
			}
		}

		void set_state_register(uint8_t value) {
			auxiliary_switches_.set_state(value);
			language_card_.set_state(value);
		}

		uint8_t get_state_register() const {
			return language_card_.get_state() | auxiliary_switches_.get_state();
		}

		void access(uint16_t address, bool is_read) {
			auxiliary_switches_.access(address, is_read);
			if((address & 0xfff0) == 0xc080) language_card_.access(address, is_read);
		}

		using AuxiliaryMemorySwitches = Apple::II::AuxiliaryMemorySwitches<MemoryMap>;
		const AuxiliaryMemorySwitches &auxiliary_switches() const {
			return auxiliary_switches_;
		}

		using LanguageCardSwitches = Apple::II::LanguageCardSwitches<MemoryMap>;
		const LanguageCardSwitches &language_card_switches() const {
			return language_card_;
		}

	private:
		AuxiliaryMemorySwitches auxiliary_switches_;
		LanguageCardSwitches language_card_;
		friend AuxiliaryMemorySwitches;
		friend LanguageCardSwitches;

		uint8_t shadow_register_ = 0x00;
		uint8_t speed_register_ = 0x00;

		// MARK: - Memory banking.

#define assert_is_region(start, end)					\
	assert(region_map[start] == region_map[start-1]+1);	\
	assert(region_map[end-1] == region_map[start]);		\
	assert(region_map[end] == region_map[end-1]+1);

		template <int type> void set_paging() {
			// Update the region from
			// $D000 onwards as per the state of the language card flags — there may
			// end up being ROM or RAM (or auxiliary RAM), and the first 4kb of it
			// may be drawn from either of two pools.
			if constexpr (bool(type & (PagingType::LanguageCard | PagingType::ZeroPage | PagingType::Main))) {
				const auto language_state = language_card_.state();
				const auto zero_state = auxiliary_switches_.zero_state();
				const auto main = auxiliary_switches_.main_state();
				const bool inhibit_banks0001 = shadow_register_ & 0x40;

				auto apply = [&language_state, this](uint32_t bank_base, uint8_t *ram) {
					// This assumes bank 1 is the one before bank 2 when RAM is linear.
					uint8_t *const d0_ram_bank = ram - (language_state.bank2 ? 0x0000 : 0x1000);

					// Crib the ROM pointer from a page it's always visible on.
					const uint8_t *const rom = &regions[region_map[0xffd0]].read[0xff'd000] - ((bank_base << 8) + 0xd000);

					auto &d0_region = regions[region_map[bank_base | 0xd0]];
					d0_region.read = language_state.read ? d0_ram_bank : rom;
					d0_region.write = language_state.write ? nullptr : d0_ram_bank;

					auto &e0_region = regions[region_map[bank_base | 0xe0]];
					e0_region.read = language_state.read ? ram : rom;
					e0_region.write = language_state.write ? nullptr : ram;

					// Assert assumptions made above re: memory layout.
					assert(region_map[bank_base | 0xd0] + 1 == region_map[bank_base | 0xe0]);
					assert(region_map[bank_base | 0xe0] == region_map[bank_base | 0xff]);
				};
				auto set_no_card = [this](uint32_t bank_base, uint8_t *read, uint8_t *write) {
					auto &d0_region = regions[region_map[bank_base | 0xd0]];
					d0_region.read = read;
					d0_region.write = write;

					auto &e0_region = regions[region_map[bank_base | 0xe0]];
					e0_region.read = read;
					e0_region.write = write;

					// Assert assumptions made above re: memory layout.
					assert(region_map[bank_base | 0xd0] + 1 == region_map[bank_base | 0xe0]);
					assert(region_map[bank_base | 0xe0] == region_map[bank_base | 0xff]);
				};

				if(inhibit_banks0001) {
					set_no_card(0x0000,
						main.base.read ? &ram_base[0x01'0000] : ram_base,
						main.base.write ? &ram_base[0x01'0000] : ram_base);
					set_no_card(0x0100, ram_base, ram_base);
				} else {
					apply(0x0000, zero_state ? &ram_base[0x01'0000] : ram_base);
					apply(0x0100, ram_base);
				}

				// The pointer stored in region_map[0xe000] has already been adjusted for
				// the 0xe0'0000 addressing offset.
				uint8_t *const e0_ram = regions[region_map[0xe000]].write;
				apply(0xe000, e0_ram);
				apply(0xe100, e0_ram);
			}

			// Establish whether main or auxiliary RAM
			// is exposed in bank $00 for a bunch of regions.
			if constexpr (type & PagingType::Main) {
				const auto state = auxiliary_switches_.main_state();

#define set(page, flags)	{\
				auto &region = regions[region_map[page]];	\
				region.read = flags.read ? &ram_base[0x01'0000] : ram_base;	\
				region.write = flags.write ? &ram_base[0x01'0000] : ram_base;	\
			}

				// Base: $0200–$03FF.
				set(0x02, state.base);
				assert_is_region(0x02, 0x04);

				// Region $0400–$07ff.
				set(0x04, state.region_04_08);
				assert_is_region(0x04, 0x08);

				// Base: $0800–$1FFF.
				set(0x08, state.base);
				assert_is_region(0x08, 0x20);

				// Region $2000–$3FFF.
				set(0x20, state.region_20_40);
				assert_is_region(0x20, 0x40);

				// Base: $4000–$BFFF.
				set(0x40, state.base);
				assert_is_region(0x40, 0xc0);

#undef set
			}

			// Update whether base or auxiliary RAM is visible in: (i) the zero
			// and stack pages; and (ii) anywhere that the language card is exposing RAM instead of ROM.
			if constexpr (bool(type & PagingType::ZeroPage)) {
				// Affects bank $00 only, and should be a single region.
				auto &region = regions[region_map[0]];
				region.read = region.write = auxiliary_switches_.zero_state() ? &ram_base[0x01'0000] : ram_base;
				assert(region_map[0x0000] == region_map[0x0001]);
				assert(region_map[0x0001]+1 == region_map[0x0002]);
			}

			// Establish whether ROM or card switches are exposed in the distinct
			// regions C100–C2FF, C300–C3FF, C400–C7FF and C800–CFFF.
			//
			// On the IIgs it intersects with the current shadow register.
			if constexpr (bool(type & (PagingType::CardArea | PagingType::Main))) {
				const bool inhibit_banks0001 = shadow_register_ & 0x40;
				const auto state = auxiliary_switches_.card_state();

				auto apply = [&state, this](uint32_t bank_base) {
					auto &c0_region = regions[region_map[bank_base | 0xc0]];
					auto &c1_region = regions[region_map[bank_base | 0xc1]];
					auto &c3_region = regions[region_map[bank_base | 0xc3]];
					auto &c4_region = regions[region_map[bank_base | 0xc4]];
					auto &c8_region = regions[region_map[bank_base | 0xc8]];

					const uint8_t *const rom = &regions[region_map[0xffd0]].read[0xffc100] - ((bank_base << 8) + 0xc100);

					// This is applied dynamically as it may be added or lost in banks $00 and $01.
					c0_region.flags |= Region::IsIO;

#define apply_region(flag, region)	\
					region.write = nullptr;	\
					if(flag) {	\
						region.read = rom;	\
						region.flags &= ~Region::IsIO;	\
					} else {	\
						region.flags |= Region::IsIO;	\
					}

					apply_region(state.region_C1_C3, c1_region);
					apply_region(state.region_C3, c3_region);
					apply_region(state.region_C4_C8, c4_region);
					apply_region(state.region_C8_D0, c8_region);

#undef apply_region

					// Sanity checks.
					assert(region_map[bank_base | 0xc1] == region_map[bank_base | 0xc0]+1);
					assert(region_map[bank_base | 0xc2] == region_map[bank_base | 0xc1]);
					assert(region_map[bank_base | 0xc3] == region_map[bank_base | 0xc2]+1);
					assert(region_map[bank_base | 0xc4] == region_map[bank_base | 0xc3]+1);
					assert(region_map[bank_base | 0xc7] == region_map[bank_base | 0xc4]);
					assert(region_map[bank_base | 0xc8] == region_map[bank_base | 0xc7]+1);
					assert(region_map[bank_base | 0xcf] == region_map[bank_base | 0xc8]);
					assert(region_map[bank_base | 0xd0] == region_map[bank_base | 0xcf]+1);
				};

				if(inhibit_banks0001) {
					// Set no IO in the Cx00 range for banks $00 and $01, just
					// regular RAM (or possibly auxiliary).
					const auto auxiliary_state = auxiliary_switches_.main_state();
					for(uint8_t region = region_map[0x00c0]; region < region_map[0x00d0]; region++) {
						regions[region].read = auxiliary_state.base.read ? &ram_base[0x01'0000] : ram_base;
						regions[region].write = auxiliary_state.base.write ? &ram_base[0x01'0000] : ram_base;
						regions[region].flags &= ~Region::IsIO;
					}
					for(uint8_t region = region_map[0x01c0]; region < region_map[0x01d0]; region++) {
						regions[region].read = regions[region].write = ram_base;
						regions[region].flags &= ~Region::IsIO;
					}
				} else {
					// Obey the card state for banks $00 and $01.
					apply(0x0000);
					apply(0x0100);
				}

				// Obey the card state for banks $e0 and $e1.
				apply(0xe000);
				apply(0xe100);
			}
		}

		// IIgs specific: sets or resets the ::IsShadowed flag across affected banks as
		// per the current state of the shadow register.
		//
		// Completely distinct from the auxiliary and language card switches.
		void set_shadowing() {
			// Relevant bits:
			//
			//	b5: inhibit shadowing, text page 2	[if ROM 03; as if always set otherwise]
			//	b4: inhibit shadowing, auxiliary high-res graphics
			//	b3: inhibit shadowing, super high-res graphics
			//	b2: inhibit shadowing, high-res graphics page 2
			//	b1: inhibit shadowing, high-res graphics page 1
			//	b0: inhibit shadowing, text page 1
			//
			// The interpretations of how the overlapping high-res and super high-res inhibit
			// bits apply used below is taken from The Apple IIgs Technical Reference, P. 178.

			// Of course, zones are:
			//
			//	$0400–$0800	Text Page 1
			//	$0800–$0C00	Text Page 2								[ROM 03 machines]
			//	$2000–$4000	High-res Page 1, and Super High-res in odd banks
			//	$4000–$6000	High-res Page 2, and Huper High-res in odd banks
			//	$6000–$a000 Odd banks only, rest of Super High-res
			//	[plus IO and language card space, subject to your definition of shadowing]

			enum Inhibit {
				TextPage1			= 0x01,
				HighRes1			= 0x02,
				HighRes2			= 0x04,
				SuperHighRes		= 0x08,
				AuxiliaryHighRes	= 0x10,
				TextPage2			= 0x20,
			};

			// Clear all shadowing.
			shadow_pages.reset();

			// Text Page 1, main and auxiliary — $0400–$0800.
			{
				const bool should_shadow_text1 = !(shadow_register_ & Inhibit::TextPage1);
				if(should_shadow_text1) {
					shadow_pages |= shadow_text1;
				}
			}

			// Text Page 2, main and auxiliary — 0x0800–0x0c00.
			//
			// The mask applied will be all 0 for a pre-ROM03 machine.
			{
				const bool should_shadow_text2 = !(shadow_register_ & Inhibit::TextPage2);
				if(should_shadow_text2) {
					shadow_pages |= shadow_text2;
				}
			}

			// Hi-res graphics Page 1, main and auxiliary — $2000–$4000;
			// also part of the super high-res graphics page on odd pages.
			//
			// Even test applied:
			//	high-res graphics page 1 inhibit bit alone is definitive.
			//
			// Odd test:
			//	(high-res graphics inhibit or auxiliary high res graphics inhibit) _and_
			//	(super high-res inhibit).
			//
			{
				const bool should_shadow_highres1 = !(shadow_register_ & Inhibit::HighRes1);
				if(should_shadow_highres1) {
					shadow_pages |= shadow_highres1;
				}

				const bool should_shadow_aux_highres1 = !(
					shadow_register_ & (Inhibit::HighRes1 | Inhibit::AuxiliaryHighRes) &&
					shadow_register_ & Inhibit::SuperHighRes
				);
				if(should_shadow_aux_highres1) {
					shadow_pages |= shadow_highres1_aux;
				}
			}

			// Hi-res graphics Page 2, main and auxiliary — $4000–$6000;
			// also part of the super high-res graphics page.
			//
			// Test applied: much like that for page 1.
			{
				const bool should_shadow_highres2 = !(shadow_register_ & Inhibit::HighRes2);
				if(should_shadow_highres2) {
					shadow_pages |= shadow_highres2;
				}

				const bool should_shadow_aux_highres2 = !(
					shadow_register_ & (Inhibit::HighRes2 | Inhibit::AuxiliaryHighRes) &&
					shadow_register_ & Inhibit::SuperHighRes
				);
				if(should_shadow_aux_highres2) {
					shadow_pages |= shadow_highres2_aux;
				}
			}

			// Residue of Super Hi-Res — $6000–$a000 (odd pages only).
			//
			// Test applied:
			//	auxiliary high res graphics inhibit and super high-res inhibit
			{
				const bool should_shadow_superhighres = !(
					shadow_register_ & Inhibit::SuperHighRes &&
					shadow_register_ & Inhibit::AuxiliaryHighRes
				);
				if(should_shadow_superhighres) {
					shadow_pages |= shadow_superhighres;
				}
			}
		}

		void print_state() {
			uint8_t region = region_map[0];
			uint32_t start = 0;
			for(uint32_t top = 0; top < 65536; top++) {
				if(region_map[top] == region) continue;

				printf("%06x -> %06x\t", start, top << 8);
				printf("%c%c\n",
					(regions[region_map[top] - 1].flags & Region::Is1Mhz) ? '1' : '-',
					(regions[region_map[top] - 1].flags & Region::IsIO) ? 'x' : '-'
				);

				start = top << 8;
				region = region_map[top];
			}
		}

#undef assert_is_region

	private:
		// Various precomputed bitsets describing key regions; std::bitset doesn't support constexpr instantiation
		// beyond the first 64 bits at the time of writing, alas, so these are generated at runtime.
		std::bitset<128> shadow_text1;
		std::bitset<128> shadow_text2;
		std::bitset<128> shadow_highres1, shadow_highres1_aux;
		std::bitset<128> shadow_highres2, shadow_highres2_aux;
		std::bitset<128> shadow_superhighres;

		void setup_shadow_maps(bool is_rom03) {
			static constexpr int shadow_shift = 10;
			static constexpr int auxiliary_offset = 0x1'0000 >> shadow_shift;

			for(size_t c = 0x0400 >> shadow_shift; c < 0x0800 >> shadow_shift; c++) {
				shadow_text1[c] = shadow_text1[c+auxiliary_offset] = true;
			}

			// Shadowing of text page 2 was added only with the ROM03 machine.
			if(is_rom03) {
				for(size_t c = 0x0800 >> shadow_shift; c < 0x0c00 >> shadow_shift; c++) {
					shadow_text2[c] = shadow_text2[c+auxiliary_offset] = true;
				}
			}

			for(size_t c = 0x2000 >> shadow_shift; c < 0x4000 >> shadow_shift; c++) {
				shadow_highres1[c] = true;
				shadow_highres1_aux[c+auxiliary_offset] = true;
			}

			for(size_t c = 0x4000 >> shadow_shift; c < 0x6000 >> shadow_shift; c++) {
				shadow_highres2[c] = true;
				shadow_highres2_aux[c+auxiliary_offset] = true;
			}

			for(size_t c = 0x6000 >> shadow_shift; c < 0xa000 >> shadow_shift; c++) {
				shadow_superhighres[c+auxiliary_offset] = true;
			}
		}

	public:
		// Memory layout here is done via double indirection; the main loop should:
		//	(i) use the top two bytes of the address to get an index from memory_map_; and
		//	(ii) use that to index the memory_regions table.
		//
		// Pointers are eight bytes at the time of writing, so the extra level of indirection
		// reduces what would otherwise be a 1.25mb table down to not a great deal more than 64kb.
		std::array<uint8_t, 65536> region_map{};
		uint8_t *ram_base = nullptr;
		uint8_t *shadow_base[2] = {nullptr, nullptr};
		static constexpr int shadow_mask[2] = {0xff'ffff, 0x01'ffff};

		struct Region {
			uint8_t *write = nullptr;
			const uint8_t *read = nullptr;
			uint8_t flags = 0;

			enum Flag: uint8_t {
				Is1Mhz = 1 << 0,		// Both reads and writes should be synchronised with the 1Mhz clock.
				IsIO = 1 << 1,			// Indicates that this region should be checked for soft switches, registers, etc.
			};
		};

		// Shadow_pages: divides the final 128kb of memory into 1kb chunks and includes a flag to indicate whether
		// each is a potential destination for shadowing.
		//
		// Shadow_banks: divides the whole 16mb of memory into 128kb chunks and includes a flag to indicate whether
		// each is a potential source of shadowing.
		std::bitset<128> shadow_pages{}, shadow_banks{};

		std::array<Region, 40> regions;	// An assert above ensures that this is large enough; there's no
										// doctrinal reason for it to be whatever size it is now, just
										// adjust as required.
};

// TODO: branching below on region.read/write is predicated on the idea that extra scratch space
// would be less efficient. Verify that?

#define MemoryMapRegion(map, address)			map.regions[map.region_map[address >> 8]]
#define MemoryMapRead(region, address, value)	*value = region.read ? region.read[address] : 0xff

// The below encapsulates the fact that I've yet to determine whether Apple intends to
// indicate that logical addresses (i.e. those prior to being mapped per the current paging)
// or physical addresses (i.e. after mapping) are subject to shadowing.
#ifdef SHADOW_LOGICAL

#define IsShadowed(map, region, address)	\
	(map.shadow_pages[((&region.write[address] - map.ram_base) >> 10) & 127] & map.shadow_banks[address >> 17])

#define MemoryMapWrite(map, region, address, value) \
	if(region.write) {	\
		region.write[address] = *value;	\
		const bool _mm_is_shadowed = IsShadowed(map, region, address);	\
		map.shadow_base[_mm_is_shadowed][address & map.shadow_mask[_mm_is_shadowed]] = *value;	\
	}

#else

#define IsShadowed(map, region, address)	\
	(map.shadow_pages[(address >> 10) & 127] & map.shadow_banks[address >> 17])

#define MemoryMapWrite(map, region, address, value) \
	if(region.write) {	\
		region.write[address] = *value;	\
		const bool _mm_is_shadowed = IsShadowed(map, region, address);	\
		map.shadow_base[_mm_is_shadowed][(&region.write[address] - map.ram_base) & map.shadow_mask[_mm_is_shadowed]] = *value;	\
	}

#endif

// Quick notes on ::IsShadowed contortions:
//
// The objective is to support shadowing:
//	1. without storing a whole extra pointer, and such that the shadowing flags are orthogonal to the current auxiliary memory settings;
//	2. in such a way as to support shadowing both in banks $00/$01 and elsewhere; and
//	3. to do so without introducing too much in the way of branching.
//
// Hence the implemented solution: if shadowing is enabled then use the distance from the start of physical RAM
// modulo 128k indexed into the bank $e0/$e1 RAM.
//
// With a further twist: the modulo and pointer are indexed on ::IsShadowed to eliminate a branch even on that.

}

#endif /* MemoryMap_h */