Thomas Harte
|
bfbe12b94b
|
Made an attempt further to tie geometry and texture generation fully together, removing the assumption that the caller will achieve one-to-one calling.
|
2017-07-07 22:25:05 -04:00 |
|
Thomas Harte
|
ab1374f801
|
Added an assert on an assumed buffer size alignment.
|
2017-07-06 21:46:24 -04:00 |
|
Thomas Harte
|
344d267fd2
|
Introduced sharper chrominance for genuinely black-and-white signals.
|
2017-07-06 21:38:33 -04:00 |
|
Thomas Harte
|
4211389ac7
|
Connected machine-supplied colour burst amplitude to shader, discarding hard-coded value. Net effect: the colour component is now discarded for the ZX80 and 81.
|
2017-07-06 21:29:08 -04:00 |
|
Thomas Harte
|
c6d00ec7d1
|
Switched phase and amplitude varying to a 3d vector; the third component is 1/amplitude if amplitude is non-zero, and zero otherwise. So you can multiply by that to get chrominance, rather than dividing by amplitude. With the direct effect that detected chrominance should automatically be zero if the colour burst didn't exist (i.e. had zero amplitude).
|
2017-07-06 21:25:38 -04:00 |
|
Thomas Harte
|
a5075d9eb5
|
Formalised the reasoning behind the colour phase fix-up and made it an opt-in per-caller value. Only the Oric currently needs to opt in.
|
2017-05-16 20:31:39 -04:00 |
|
Thomas Harte
|
c2b5a9bb1f
|
Minor fix: given that phase is now a function of position, stop nudging position.
|
2017-05-13 21:50:48 -04:00 |
|
Thomas Harte
|
b14c892740
|
Switched to a safer RAII approach to this lock.
|
2017-05-10 21:29:39 -04:00 |
|
Thomas Harte
|
e01f3f06c8
|
Completed curly bracket movement.
|
2017-03-26 14:34:47 -04:00 |
|
Thomas Harte
|
e63229a5e5
|
Pulled vertical sync detection entirely outside the loop, and gave it greater perspective.
|
2017-03-06 19:15:33 -05:00 |
|
Thomas Harte
|
ad73379d1c
|
Took vertical sync detection logic entirely out of the loop.
|
2017-03-05 20:17:55 -05:00 |
|
Thomas Harte
|
4751615623
|
Fixed NTSC colour cycle count, and hence the 2600's reported line lengths and phase offset.
|
2017-03-04 17:31:39 -05:00 |
|
Thomas Harte
|
a3fcd15980
|
Loosened sync charge level requirement.
|
2017-03-01 22:16:56 -05:00 |
|
Thomas Harte
|
d19f26887d
|
Performed a very naive shuffling of output builder sets onto the OpenGL queue. Which makes the frequency switcher work properly from it's possibly-contextless thread.
|
2017-02-20 10:39:31 -05:00 |
|
Thomas Harte
|
6cb95b4fc5
|
Switched to passing around std::strings rather than char *s, because they should be easier to capture.
|
2017-02-20 10:35:33 -05:00 |
|
Thomas Harte
|
d979a822ac
|
Introduced a deferred task list for the OpenGL thread.
|
2017-02-19 21:46:07 -05:00 |
|
Thomas Harte
|
fccdce65b9
|
Switched to lock guards.
|
2017-02-19 21:45:28 -05:00 |
|
Thomas Harte
|
97cdfea9e9
|
Resolved spurious static analyser complaint: input_size and output_size aren't supposed to have defined values if input or output is null. But whatever.
|
2017-02-11 13:36:09 -05:00 |
|
Thomas Harte
|
fcf8cafb5d
|
Sought to ensure that communicating a colour burst in multiple parts doesn't ruin the phase.
|
2017-02-06 18:27:44 -05:00 |
|
Thomas Harte
|
23f3ccd77a
|
Made a further attempt to prevent overwrites.
|
2017-02-05 17:47:34 -05:00 |
|
Thomas Harte
|
ebde955356
|
This needs to be a memmove as the areas may overlap.
|
2017-01-29 16:12:48 -05:00 |
|
Thomas Harte
|
7fd02e7f4c
|
Added an extra flag to avoid potential race condition on is_full_, being reset from the background despite a write area not having been allocated.
|
2017-01-29 16:11:29 -05:00 |
|
Thomas Harte
|
c2d7e36c8f
|
Ensured logic for whether composite output is in use is consistent.
|
2017-01-25 21:25:03 -05:00 |
|
Thomas Harte
|
4d6e78e641
|
Reinstated temporary Oric-related fix.
|
2017-01-24 22:16:15 -05:00 |
|
Thomas Harte
|
5761c8267b
|
[Re-]Eliminated connection between colour subcarrier frequency and monitor output mode.
|
2017-01-24 20:48:54 -05:00 |
|
Thomas Harte
|
b4159295f6
|
Switched to using quads for intermediate draws. The specific concern is the flexibility offered in the GL spec as to line drawing algorithms. And even if a driver implements exactly to spec then it should omit the final pixel.
|
2017-01-11 21:18:41 -05:00 |
|
Thomas Harte
|
d0a93409e6
|
Made an attempt to simplify in-shader phase calculation, now that output position is a direct multiple of phase.
|
2017-01-11 08:18:00 -05:00 |
|
Thomas Harte
|
4c3669f210
|
Reduced precision of input phase, but I'm not necessarily persuaded by it as a move. However it's clear that something is off in that whole area. But if phase is locked by output position, do I need to retain this level of complexity? Also ensured that intermediate buffers prior to the final are sampled using the nearest sampling mode, also to reduce precision errors.
|
2017-01-10 22:08:07 -05:00 |
|
Thomas Harte
|
eeb646868b
|
Switched off filtering, at least temporarily, to try to ensure that sampling is all where it should be.
|
2017-01-08 19:53:08 -05:00 |
|
Thomas Harte
|
3d789732a2
|
Switched back to full buffer clearing. Until I can figure out the source of noise.
|
2017-01-08 19:50:31 -05:00 |
|
Thomas Harte
|
d2a7d39749
|
Ensured the output lock isn't held while talking to the delegate.
|
2017-01-08 19:49:21 -05:00 |
|
Thomas Harte
|
9521718120
|
Colour phase is multiplied by 255, not 256.
|
2017-01-08 17:21:26 -05:00 |
|
Thomas Harte
|
28909e33ca
|
Eliminated phaseCyclesPerTick as implied.
|
2017-01-08 16:48:02 -05:00 |
|
Thomas Harte
|
79632b1d34
|
Instituted de-escalating phase-related extensions, definitively to kill rounding error edges.
|
2017-01-08 16:24:22 -05:00 |
|
Thomas Harte
|
7ad64ff16b
|
Made further efforts to support throughput via memory barrier.
|
2017-01-08 14:47:16 -05:00 |
|
Thomas Harte
|
be48c950b4
|
Started taking steps towards using a texture barrier where possible to reduce all of my framebuffer binds. Some output appears, but it's not correct.
|
2017-01-08 11:13:20 -05:00 |
|
Thomas Harte
|
0487b8c178
|
Definitively eliminated the additional y filtering step; if I'm going to work to ensure always four samples per colour cycle, I can put the channel separation coefficients directly into their shaders, cutting down on samples.
|
2017-01-07 16:02:33 -05:00 |
|
Thomas Harte
|
5740015f56
|
Temporarily disabled composite processing to show the pure stream. Fixed both automatic calculations of phase — per line and, at input, per pixel.
|
2017-01-07 12:38:00 -05:00 |
|
Thomas Harte
|
c84004bfa3
|
Fixed: colour_cycle_numerator_ doesn't need to be multiplied by the time multiplier because it'll get that for free from the calculation of next_run_length.
|
2017-01-06 21:36:19 -05:00 |
|
Thomas Harte
|
c746a3711f
|
Temporarily disabled my attempt to be clever with bilinear filtering when applying a lowpass filter. Will need to investigate.
|
2017-01-04 08:06:18 -05:00 |
|
Thomas Harte
|
aa7774a9a6
|
Experimental: up the chroma accuracy, just let the luma go straight through. Subject to figuring out how I'm still losing so much precision.
|
2017-01-03 22:41:34 -05:00 |
|
Thomas Harte
|
a836120945
|
Restored proper colour separation, but somewhere a massive hit in horizontal resolution is happening — much greater than one would expect from the sample size picked. So investigation to come.
|
2017-01-03 22:32:07 -05:00 |
|
Thomas Harte
|
7d60df9075
|
Added the option for both intermediate and output shaders to use only a portion of the input/output texture; made an attempt to pick an appropriate proportion in order to align signal sampling with the colour subcarrier.
|
2017-01-03 22:16:52 -05:00 |
|
Thomas Harte
|
f2b8b26bc4
|
Started throwing some comments into my shaders.
|
2017-01-03 21:16:38 -05:00 |
|
Thomas Harte
|
34d213dec4
|
Decreased Y resolution, again also hopefully temporarily.
|
2016-12-10 15:35:38 -05:00 |
|
Thomas Harte
|
81a102d951
|
Upped intermediate buffer size, at least temporarily, while I look for the source of the interference patterns I'm seeing.
|
2016-12-10 15:20:10 -05:00 |
|
Thomas Harte
|
0e71802b92
|
Reduced Oric video to single nibble constants. Removed attempt at asynchronous flush as no longer required.
|
2016-12-10 14:17:46 -05:00 |
|
Thomas Harte
|
a549fd1ecc
|
Introduced the ability simply to piggy-back off the CRT's natural phase for the colour burst, thereby eliminating a couple of redundant independent attempts in the Oric and Electron.
|
2016-12-10 13:42:34 -05:00 |
|
Thomas Harte
|
5216dda675
|
Added some brief extra exposition to the texture builder, cut all internal tex_x/y and source_divider stuff from the CRT.
|
2016-12-06 19:08:55 -05:00 |
|
Thomas Harte
|
33d52bb573
|
Ensured no over-moving.
|
2016-12-06 19:02:18 -05:00 |
|