llvm-6502/lib/Target/Mips/MipsSubtarget.h

236 lines
7.0 KiB
C
Raw Normal View History

//===-- MipsSubtarget.h - Define Subtarget for the Mips ---------*- C++ -*-===//
//
// The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
// This file declares the Mips specific subclass of TargetSubtargetInfo.
//
//===----------------------------------------------------------------------===//
#ifndef MIPSSUBTARGET_H
#define MIPSSUBTARGET_H
#include "MCTargetDesc/MipsReginfo.h"
#include "llvm/MC/MCInstrItineraries.h"
This patch enables llvm to switch between compiling for mips32/mips64 and mips16 on a per function basis. Because this patch is somewhat involved I have provide an overview of the key pieces of it. The patch is written so as to not change the behavior of the non mixed mode. We have tested this a lot but it is something new to switch subtargets so we don't want any chance of regression in the mainline compiler until we have more confidence in this. Mips32/64 are very different from Mip16 as is the case of ARM vs Thumb1. For that reason there are derived versions of the register info, frame info, instruction info and instruction selection classes. Now we register three separate passes for instruction selection. One which is used to switch subtargets (MipsModuleISelDAGToDAG.cpp) and then one for each of the current subtargets (Mips16ISelDAGToDAG.cpp and MipsSEISelDAGToDAG.cpp). When the ModuleISel pass runs, it determines if there is a need to switch subtargets and if so, the owning pointers in MipsTargetMachine are appropriately changed. When 16Isel or SEIsel is run, they will return immediately without doing any work if the current subtarget mode does not apply to them. In addition, MipsAsmPrinter needs to be reset on a function basis. The pass BasicTargetTransformInfo is substituted with a null pass since the pass is immutable and really needs to be a function pass for it to be used with changing subtargets. This will be fixed in a follow on patch. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179118 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-09 19:46:01 +00:00
#include "llvm/Support/ErrorHandling.h"
#include "llvm/Target/TargetSubtargetInfo.h"
This patch enables llvm to switch between compiling for mips32/mips64 and mips16 on a per function basis. Because this patch is somewhat involved I have provide an overview of the key pieces of it. The patch is written so as to not change the behavior of the non mixed mode. We have tested this a lot but it is something new to switch subtargets so we don't want any chance of regression in the mainline compiler until we have more confidence in this. Mips32/64 are very different from Mip16 as is the case of ARM vs Thumb1. For that reason there are derived versions of the register info, frame info, instruction info and instruction selection classes. Now we register three separate passes for instruction selection. One which is used to switch subtargets (MipsModuleISelDAGToDAG.cpp) and then one for each of the current subtargets (Mips16ISelDAGToDAG.cpp and MipsSEISelDAGToDAG.cpp). When the ModuleISel pass runs, it determines if there is a need to switch subtargets and if so, the owning pointers in MipsTargetMachine are appropriately changed. When 16Isel or SEIsel is run, they will return immediately without doing any work if the current subtarget mode does not apply to them. In addition, MipsAsmPrinter needs to be reset on a function basis. The pass BasicTargetTransformInfo is substituted with a null pass since the pass is immutable and really needs to be a function pass for it to be used with changing subtargets. This will be fixed in a follow on patch. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179118 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-09 19:46:01 +00:00
#include <string>
#define GET_SUBTARGETINFO_HEADER
#include "MipsGenSubtargetInfo.inc"
namespace llvm {
class StringRef;
This patch enables llvm to switch between compiling for mips32/mips64 and mips16 on a per function basis. Because this patch is somewhat involved I have provide an overview of the key pieces of it. The patch is written so as to not change the behavior of the non mixed mode. We have tested this a lot but it is something new to switch subtargets so we don't want any chance of regression in the mainline compiler until we have more confidence in this. Mips32/64 are very different from Mip16 as is the case of ARM vs Thumb1. For that reason there are derived versions of the register info, frame info, instruction info and instruction selection classes. Now we register three separate passes for instruction selection. One which is used to switch subtargets (MipsModuleISelDAGToDAG.cpp) and then one for each of the current subtargets (Mips16ISelDAGToDAG.cpp and MipsSEISelDAGToDAG.cpp). When the ModuleISel pass runs, it determines if there is a need to switch subtargets and if so, the owning pointers in MipsTargetMachine are appropriately changed. When 16Isel or SEIsel is run, they will return immediately without doing any work if the current subtarget mode does not apply to them. In addition, MipsAsmPrinter needs to be reset on a function basis. The pass BasicTargetTransformInfo is substituted with a null pass since the pass is immutable and really needs to be a function pass for it to be used with changing subtargets. This will be fixed in a follow on patch. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179118 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-09 19:46:01 +00:00
class MipsTargetMachine;
class MipsSubtarget : public MipsGenSubtargetInfo {
virtual void anchor();
public:
// NOTE: O64 will not be supported.
enum MipsABIEnum {
UnknownABI, O32, N32, N64, EABI
};
protected:
Several changes to Mips backend, experimental fp support being the most important. - Cleanup in the Subtarget info with addition of new features, not all support yet, but they allow the future inclusion of features easier. Among new features, we have : Arch family info (mips1, mips2, ...), ABI info (o32, eabi), 64-bit integer and float registers, allegrex vector FPU (VFPU), single float only support. - TargetMachine now detects allegrex core. - Added allegrex (Mips32r2) sext_inreg instructions. - *Added Float Point Instructions*, handling single float only, and aliased accesses for 32-bit FPUs. - Some cleanup in FP instruction formats and FP register classes. - Calling conventions improved to support mips 32-bit EABI. - Added Asm Printer support for fp cond codes. - Added support for sret copy to a return register. - EABI support added into LowerCALL and FORMAL_ARGS. - MipsFunctionInfo now keeps a virtual register per function to track the sret on function entry until function ret. - MipsInstrInfo FP support into methods (isMoveInstr, isLoadFromStackSlot, ...), FP cond codes mapping and initial FP Branch Analysis. - Two new Mips SDNode to handle fp branch and compare instructions : FPBrcond, FPCmp - MipsTargetLowering : handling different FP classes, Allegrex support, sret return copy, no homing location within EABI, non 32-bit stack objects arguments, and asm constraint for float. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53146 91177308-0d34-0410-b5e6-96231b3b80d8
2008-07-05 19:05:21 +00:00
enum MipsArchEnum {
Mips32, Mips32r2, Mips64, Mips64r2
Several changes to Mips backend, experimental fp support being the most important. - Cleanup in the Subtarget info with addition of new features, not all support yet, but they allow the future inclusion of features easier. Among new features, we have : Arch family info (mips1, mips2, ...), ABI info (o32, eabi), 64-bit integer and float registers, allegrex vector FPU (VFPU), single float only support. - TargetMachine now detects allegrex core. - Added allegrex (Mips32r2) sext_inreg instructions. - *Added Float Point Instructions*, handling single float only, and aliased accesses for 32-bit FPUs. - Some cleanup in FP instruction formats and FP register classes. - Calling conventions improved to support mips 32-bit EABI. - Added Asm Printer support for fp cond codes. - Added support for sret copy to a return register. - EABI support added into LowerCALL and FORMAL_ARGS. - MipsFunctionInfo now keeps a virtual register per function to track the sret on function entry until function ret. - MipsInstrInfo FP support into methods (isMoveInstr, isLoadFromStackSlot, ...), FP cond codes mapping and initial FP Branch Analysis. - Two new Mips SDNode to handle fp branch and compare instructions : FPBrcond, FPCmp - MipsTargetLowering : handling different FP classes, Allegrex support, sret return copy, no homing location within EABI, non 32-bit stack objects arguments, and asm constraint for float. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53146 91177308-0d34-0410-b5e6-96231b3b80d8
2008-07-05 19:05:21 +00:00
};
// Mips architecture version
Several changes to Mips backend, experimental fp support being the most important. - Cleanup in the Subtarget info with addition of new features, not all support yet, but they allow the future inclusion of features easier. Among new features, we have : Arch family info (mips1, mips2, ...), ABI info (o32, eabi), 64-bit integer and float registers, allegrex vector FPU (VFPU), single float only support. - TargetMachine now detects allegrex core. - Added allegrex (Mips32r2) sext_inreg instructions. - *Added Float Point Instructions*, handling single float only, and aliased accesses for 32-bit FPUs. - Some cleanup in FP instruction formats and FP register classes. - Calling conventions improved to support mips 32-bit EABI. - Added Asm Printer support for fp cond codes. - Added support for sret copy to a return register. - EABI support added into LowerCALL and FORMAL_ARGS. - MipsFunctionInfo now keeps a virtual register per function to track the sret on function entry until function ret. - MipsInstrInfo FP support into methods (isMoveInstr, isLoadFromStackSlot, ...), FP cond codes mapping and initial FP Branch Analysis. - Two new Mips SDNode to handle fp branch and compare instructions : FPBrcond, FPCmp - MipsTargetLowering : handling different FP classes, Allegrex support, sret return copy, no homing location within EABI, non 32-bit stack objects arguments, and asm constraint for float. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53146 91177308-0d34-0410-b5e6-96231b3b80d8
2008-07-05 19:05:21 +00:00
MipsArchEnum MipsArchVersion;
// Mips supported ABIs
Several changes to Mips backend, experimental fp support being the most important. - Cleanup in the Subtarget info with addition of new features, not all support yet, but they allow the future inclusion of features easier. Among new features, we have : Arch family info (mips1, mips2, ...), ABI info (o32, eabi), 64-bit integer and float registers, allegrex vector FPU (VFPU), single float only support. - TargetMachine now detects allegrex core. - Added allegrex (Mips32r2) sext_inreg instructions. - *Added Float Point Instructions*, handling single float only, and aliased accesses for 32-bit FPUs. - Some cleanup in FP instruction formats and FP register classes. - Calling conventions improved to support mips 32-bit EABI. - Added Asm Printer support for fp cond codes. - Added support for sret copy to a return register. - EABI support added into LowerCALL and FORMAL_ARGS. - MipsFunctionInfo now keeps a virtual register per function to track the sret on function entry until function ret. - MipsInstrInfo FP support into methods (isMoveInstr, isLoadFromStackSlot, ...), FP cond codes mapping and initial FP Branch Analysis. - Two new Mips SDNode to handle fp branch and compare instructions : FPBrcond, FPCmp - MipsTargetLowering : handling different FP classes, Allegrex support, sret return copy, no homing location within EABI, non 32-bit stack objects arguments, and asm constraint for float. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53146 91177308-0d34-0410-b5e6-96231b3b80d8
2008-07-05 19:05:21 +00:00
MipsABIEnum MipsABI;
// IsLittle - The target is Little Endian
bool IsLittle;
Several changes to Mips backend, experimental fp support being the most important. - Cleanup in the Subtarget info with addition of new features, not all support yet, but they allow the future inclusion of features easier. Among new features, we have : Arch family info (mips1, mips2, ...), ABI info (o32, eabi), 64-bit integer and float registers, allegrex vector FPU (VFPU), single float only support. - TargetMachine now detects allegrex core. - Added allegrex (Mips32r2) sext_inreg instructions. - *Added Float Point Instructions*, handling single float only, and aliased accesses for 32-bit FPUs. - Some cleanup in FP instruction formats and FP register classes. - Calling conventions improved to support mips 32-bit EABI. - Added Asm Printer support for fp cond codes. - Added support for sret copy to a return register. - EABI support added into LowerCALL and FORMAL_ARGS. - MipsFunctionInfo now keeps a virtual register per function to track the sret on function entry until function ret. - MipsInstrInfo FP support into methods (isMoveInstr, isLoadFromStackSlot, ...), FP cond codes mapping and initial FP Branch Analysis. - Two new Mips SDNode to handle fp branch and compare instructions : FPBrcond, FPCmp - MipsTargetLowering : handling different FP classes, Allegrex support, sret return copy, no homing location within EABI, non 32-bit stack objects arguments, and asm constraint for float. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53146 91177308-0d34-0410-b5e6-96231b3b80d8
2008-07-05 19:05:21 +00:00
// IsSingleFloat - The target only supports single precision float
// point operations. This enable the target to use all 32 32-bit
// floating point registers instead of only using even ones.
Several changes to Mips backend, experimental fp support being the most important. - Cleanup in the Subtarget info with addition of new features, not all support yet, but they allow the future inclusion of features easier. Among new features, we have : Arch family info (mips1, mips2, ...), ABI info (o32, eabi), 64-bit integer and float registers, allegrex vector FPU (VFPU), single float only support. - TargetMachine now detects allegrex core. - Added allegrex (Mips32r2) sext_inreg instructions. - *Added Float Point Instructions*, handling single float only, and aliased accesses for 32-bit FPUs. - Some cleanup in FP instruction formats and FP register classes. - Calling conventions improved to support mips 32-bit EABI. - Added Asm Printer support for fp cond codes. - Added support for sret copy to a return register. - EABI support added into LowerCALL and FORMAL_ARGS. - MipsFunctionInfo now keeps a virtual register per function to track the sret on function entry until function ret. - MipsInstrInfo FP support into methods (isMoveInstr, isLoadFromStackSlot, ...), FP cond codes mapping and initial FP Branch Analysis. - Two new Mips SDNode to handle fp branch and compare instructions : FPBrcond, FPCmp - MipsTargetLowering : handling different FP classes, Allegrex support, sret return copy, no homing location within EABI, non 32-bit stack objects arguments, and asm constraint for float. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53146 91177308-0d34-0410-b5e6-96231b3b80d8
2008-07-05 19:05:21 +00:00
bool IsSingleFloat;
// IsFP64bit - The target processor has 64-bit floating point registers.
Several changes to Mips backend, experimental fp support being the most important. - Cleanup in the Subtarget info with addition of new features, not all support yet, but they allow the future inclusion of features easier. Among new features, we have : Arch family info (mips1, mips2, ...), ABI info (o32, eabi), 64-bit integer and float registers, allegrex vector FPU (VFPU), single float only support. - TargetMachine now detects allegrex core. - Added allegrex (Mips32r2) sext_inreg instructions. - *Added Float Point Instructions*, handling single float only, and aliased accesses for 32-bit FPUs. - Some cleanup in FP instruction formats and FP register classes. - Calling conventions improved to support mips 32-bit EABI. - Added Asm Printer support for fp cond codes. - Added support for sret copy to a return register. - EABI support added into LowerCALL and FORMAL_ARGS. - MipsFunctionInfo now keeps a virtual register per function to track the sret on function entry until function ret. - MipsInstrInfo FP support into methods (isMoveInstr, isLoadFromStackSlot, ...), FP cond codes mapping and initial FP Branch Analysis. - Two new Mips SDNode to handle fp branch and compare instructions : FPBrcond, FPCmp - MipsTargetLowering : handling different FP classes, Allegrex support, sret return copy, no homing location within EABI, non 32-bit stack objects arguments, and asm constraint for float. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53146 91177308-0d34-0410-b5e6-96231b3b80d8
2008-07-05 19:05:21 +00:00
bool IsFP64bit;
// IsFP64bit - General-purpose registers are 64 bits wide
bool IsGP64bit;
// HasVFPU - Processor has a vector floating point unit.
bool HasVFPU;
Several changes to Mips backend, experimental fp support being the most important. - Cleanup in the Subtarget info with addition of new features, not all support yet, but they allow the future inclusion of features easier. Among new features, we have : Arch family info (mips1, mips2, ...), ABI info (o32, eabi), 64-bit integer and float registers, allegrex vector FPU (VFPU), single float only support. - TargetMachine now detects allegrex core. - Added allegrex (Mips32r2) sext_inreg instructions. - *Added Float Point Instructions*, handling single float only, and aliased accesses for 32-bit FPUs. - Some cleanup in FP instruction formats and FP register classes. - Calling conventions improved to support mips 32-bit EABI. - Added Asm Printer support for fp cond codes. - Added support for sret copy to a return register. - EABI support added into LowerCALL and FORMAL_ARGS. - MipsFunctionInfo now keeps a virtual register per function to track the sret on function entry until function ret. - MipsInstrInfo FP support into methods (isMoveInstr, isLoadFromStackSlot, ...), FP cond codes mapping and initial FP Branch Analysis. - Two new Mips SDNode to handle fp branch and compare instructions : FPBrcond, FPCmp - MipsTargetLowering : handling different FP classes, Allegrex support, sret return copy, no homing location within EABI, non 32-bit stack objects arguments, and asm constraint for float. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53146 91177308-0d34-0410-b5e6-96231b3b80d8
2008-07-05 19:05:21 +00:00
// isLinux - Target system is Linux. Is false we consider ELFOS for now.
bool IsLinux;
// UseSmallSection - Small section is used.
bool UseSmallSection;
/// Features related to the presence of specific instructions.
// HasSEInReg - SEB and SEH (signext in register) instructions.
bool HasSEInReg;
// HasCondMov - Conditional mov (MOVZ, MOVN) instructions.
bool HasCondMov;
// HasSwap - Byte and half swap instructions.
bool HasSwap;
// HasBitCount - Count leading '1' and '0' bits.
bool HasBitCount;
// HasFPIdx -- Floating point indexed load/store instructions.
bool HasFPIdx;
// InMips16 -- can process Mips16 instructions
bool InMips16Mode;
// Mips16 hard float
bool InMips16HardFloat;
This patch enables llvm to switch between compiling for mips32/mips64 and mips16 on a per function basis. Because this patch is somewhat involved I have provide an overview of the key pieces of it. The patch is written so as to not change the behavior of the non mixed mode. We have tested this a lot but it is something new to switch subtargets so we don't want any chance of regression in the mainline compiler until we have more confidence in this. Mips32/64 are very different from Mip16 as is the case of ARM vs Thumb1. For that reason there are derived versions of the register info, frame info, instruction info and instruction selection classes. Now we register three separate passes for instruction selection. One which is used to switch subtargets (MipsModuleISelDAGToDAG.cpp) and then one for each of the current subtargets (Mips16ISelDAGToDAG.cpp and MipsSEISelDAGToDAG.cpp). When the ModuleISel pass runs, it determines if there is a need to switch subtargets and if so, the owning pointers in MipsTargetMachine are appropriately changed. When 16Isel or SEIsel is run, they will return immediately without doing any work if the current subtarget mode does not apply to them. In addition, MipsAsmPrinter needs to be reset on a function basis. The pass BasicTargetTransformInfo is substituted with a null pass since the pass is immutable and really needs to be a function pass for it to be used with changing subtargets. This will be fixed in a follow on patch. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179118 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-09 19:46:01 +00:00
// PreviousInMips16 -- the function we just processed was in Mips 16 Mode
bool PreviousInMips16Mode;
// InMicroMips -- can process MicroMips instructions
bool InMicroMipsMode;
// HasDSP, HasDSPR2 -- supports DSP ASE.
bool HasDSP, HasDSPR2;
This patch enables llvm to switch between compiling for mips32/mips64 and mips16 on a per function basis. Because this patch is somewhat involved I have provide an overview of the key pieces of it. The patch is written so as to not change the behavior of the non mixed mode. We have tested this a lot but it is something new to switch subtargets so we don't want any chance of regression in the mainline compiler until we have more confidence in this. Mips32/64 are very different from Mip16 as is the case of ARM vs Thumb1. For that reason there are derived versions of the register info, frame info, instruction info and instruction selection classes. Now we register three separate passes for instruction selection. One which is used to switch subtargets (MipsModuleISelDAGToDAG.cpp) and then one for each of the current subtargets (Mips16ISelDAGToDAG.cpp and MipsSEISelDAGToDAG.cpp). When the ModuleISel pass runs, it determines if there is a need to switch subtargets and if so, the owning pointers in MipsTargetMachine are appropriately changed. When 16Isel or SEIsel is run, they will return immediately without doing any work if the current subtarget mode does not apply to them. In addition, MipsAsmPrinter needs to be reset on a function basis. The pass BasicTargetTransformInfo is substituted with a null pass since the pass is immutable and really needs to be a function pass for it to be used with changing subtargets. This will be fixed in a follow on patch. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179118 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-09 19:46:01 +00:00
// Allow mixed Mips16 and Mips32 in one source file
bool AllowMixed16_32;
This is for an experimental option -mips-os16. The idea is to compile all Mips32 code as Mips16 unless it can't be compiled as Mips 16. For now this would happen as long as floating point instructions are not needed. Probably it would also make sense to compile as mips32 if atomic operations are needed too. There may be other cases too. A module pass prescans the IR and adds the mips16 or nomips16 attribute to functions depending on the functions needs. Mips 16 mode can result in a 40% code compression by utililizing 16 bit encoding of many instructions. The hope is for this to replace the traditional gcc way of dealing with Mips16 code using floating point which involves essentially using soft float but with a library implemented using mips32 floating point. This gcc method also requires creating stubs so that Mips32 code can interact with these Mips 16 functions that have floating point needs. My conjecture is that in reality this traditional gcc method would never win over this new method. I will be implementing the traditional gcc method also. Some of it is already done but I needed to do the stubs to finish the work and those required this mips16/32 mixed mode capability. I have more ideas for to make this new method much better and I think the old method will just live in llvm for anyone that needs the backward compatibility but I don't for what reason that would be needed. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179185 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-10 16:58:04 +00:00
// Optimize for space by compiling all functions as Mips 16 unless
// it needs floating point. Functions needing floating point are
// compiled as Mips32
bool Os16;
// HasMSA -- supports MSA ASE.
bool HasMSA;
InstrItineraryData InstrItins;
// The instance to the register info section object
MipsReginfo MRI;
// Relocation Model
Reloc::Model RM;
This patch enables llvm to switch between compiling for mips32/mips64 and mips16 on a per function basis. Because this patch is somewhat involved I have provide an overview of the key pieces of it. The patch is written so as to not change the behavior of the non mixed mode. We have tested this a lot but it is something new to switch subtargets so we don't want any chance of regression in the mainline compiler until we have more confidence in this. Mips32/64 are very different from Mip16 as is the case of ARM vs Thumb1. For that reason there are derived versions of the register info, frame info, instruction info and instruction selection classes. Now we register three separate passes for instruction selection. One which is used to switch subtargets (MipsModuleISelDAGToDAG.cpp) and then one for each of the current subtargets (Mips16ISelDAGToDAG.cpp and MipsSEISelDAGToDAG.cpp). When the ModuleISel pass runs, it determines if there is a need to switch subtargets and if so, the owning pointers in MipsTargetMachine are appropriately changed. When 16Isel or SEIsel is run, they will return immediately without doing any work if the current subtarget mode does not apply to them. In addition, MipsAsmPrinter needs to be reset on a function basis. The pass BasicTargetTransformInfo is substituted with a null pass since the pass is immutable and really needs to be a function pass for it to be used with changing subtargets. This will be fixed in a follow on patch. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179118 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-09 19:46:01 +00:00
// We can override the determination of whether we are in mips16 mode
// as from the command line
enum {NoOverride, Mips16Override, NoMips16Override} OverrideMode;
MipsTargetMachine *TM;
public:
virtual bool enablePostRAScheduler(CodeGenOpt::Level OptLevel,
AntiDepBreakMode& Mode,
RegClassVector& CriticalPathRCs) const;
Several changes to Mips backend, experimental fp support being the most important. - Cleanup in the Subtarget info with addition of new features, not all support yet, but they allow the future inclusion of features easier. Among new features, we have : Arch family info (mips1, mips2, ...), ABI info (o32, eabi), 64-bit integer and float registers, allegrex vector FPU (VFPU), single float only support. - TargetMachine now detects allegrex core. - Added allegrex (Mips32r2) sext_inreg instructions. - *Added Float Point Instructions*, handling single float only, and aliased accesses for 32-bit FPUs. - Some cleanup in FP instruction formats and FP register classes. - Calling conventions improved to support mips 32-bit EABI. - Added Asm Printer support for fp cond codes. - Added support for sret copy to a return register. - EABI support added into LowerCALL and FORMAL_ARGS. - MipsFunctionInfo now keeps a virtual register per function to track the sret on function entry until function ret. - MipsInstrInfo FP support into methods (isMoveInstr, isLoadFromStackSlot, ...), FP cond codes mapping and initial FP Branch Analysis. - Two new Mips SDNode to handle fp branch and compare instructions : FPBrcond, FPCmp - MipsTargetLowering : handling different FP classes, Allegrex support, sret return copy, no homing location within EABI, non 32-bit stack objects arguments, and asm constraint for float. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53146 91177308-0d34-0410-b5e6-96231b3b80d8
2008-07-05 19:05:21 +00:00
/// Only O32 and EABI supported right now.
bool isABI_EABI() const { return MipsABI == EABI; }
bool isABI_N64() const { return MipsABI == N64; }
bool isABI_N32() const { return MipsABI == N32; }
Several changes to Mips backend, experimental fp support being the most important. - Cleanup in the Subtarget info with addition of new features, not all support yet, but they allow the future inclusion of features easier. Among new features, we have : Arch family info (mips1, mips2, ...), ABI info (o32, eabi), 64-bit integer and float registers, allegrex vector FPU (VFPU), single float only support. - TargetMachine now detects allegrex core. - Added allegrex (Mips32r2) sext_inreg instructions. - *Added Float Point Instructions*, handling single float only, and aliased accesses for 32-bit FPUs. - Some cleanup in FP instruction formats and FP register classes. - Calling conventions improved to support mips 32-bit EABI. - Added Asm Printer support for fp cond codes. - Added support for sret copy to a return register. - EABI support added into LowerCALL and FORMAL_ARGS. - MipsFunctionInfo now keeps a virtual register per function to track the sret on function entry until function ret. - MipsInstrInfo FP support into methods (isMoveInstr, isLoadFromStackSlot, ...), FP cond codes mapping and initial FP Branch Analysis. - Two new Mips SDNode to handle fp branch and compare instructions : FPBrcond, FPCmp - MipsTargetLowering : handling different FP classes, Allegrex support, sret return copy, no homing location within EABI, non 32-bit stack objects arguments, and asm constraint for float. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53146 91177308-0d34-0410-b5e6-96231b3b80d8
2008-07-05 19:05:21 +00:00
bool isABI_O32() const { return MipsABI == O32; }
unsigned getTargetABI() const { return MipsABI; }
Several changes to Mips backend, experimental fp support being the most important. - Cleanup in the Subtarget info with addition of new features, not all support yet, but they allow the future inclusion of features easier. Among new features, we have : Arch family info (mips1, mips2, ...), ABI info (o32, eabi), 64-bit integer and float registers, allegrex vector FPU (VFPU), single float only support. - TargetMachine now detects allegrex core. - Added allegrex (Mips32r2) sext_inreg instructions. - *Added Float Point Instructions*, handling single float only, and aliased accesses for 32-bit FPUs. - Some cleanup in FP instruction formats and FP register classes. - Calling conventions improved to support mips 32-bit EABI. - Added Asm Printer support for fp cond codes. - Added support for sret copy to a return register. - EABI support added into LowerCALL and FORMAL_ARGS. - MipsFunctionInfo now keeps a virtual register per function to track the sret on function entry until function ret. - MipsInstrInfo FP support into methods (isMoveInstr, isLoadFromStackSlot, ...), FP cond codes mapping and initial FP Branch Analysis. - Two new Mips SDNode to handle fp branch and compare instructions : FPBrcond, FPCmp - MipsTargetLowering : handling different FP classes, Allegrex support, sret return copy, no homing location within EABI, non 32-bit stack objects arguments, and asm constraint for float. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53146 91177308-0d34-0410-b5e6-96231b3b80d8
2008-07-05 19:05:21 +00:00
/// This constructor initializes the data members to match that
/// of the specified triple.
MipsSubtarget(const std::string &TT, const std::string &CPU,
This patch enables llvm to switch between compiling for mips32/mips64 and mips16 on a per function basis. Because this patch is somewhat involved I have provide an overview of the key pieces of it. The patch is written so as to not change the behavior of the non mixed mode. We have tested this a lot but it is something new to switch subtargets so we don't want any chance of regression in the mainline compiler until we have more confidence in this. Mips32/64 are very different from Mip16 as is the case of ARM vs Thumb1. For that reason there are derived versions of the register info, frame info, instruction info and instruction selection classes. Now we register three separate passes for instruction selection. One which is used to switch subtargets (MipsModuleISelDAGToDAG.cpp) and then one for each of the current subtargets (Mips16ISelDAGToDAG.cpp and MipsSEISelDAGToDAG.cpp). When the ModuleISel pass runs, it determines if there is a need to switch subtargets and if so, the owning pointers in MipsTargetMachine are appropriately changed. When 16Isel or SEIsel is run, they will return immediately without doing any work if the current subtarget mode does not apply to them. In addition, MipsAsmPrinter needs to be reset on a function basis. The pass BasicTargetTransformInfo is substituted with a null pass since the pass is immutable and really needs to be a function pass for it to be used with changing subtargets. This will be fixed in a follow on patch. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179118 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-09 19:46:01 +00:00
const std::string &FS, bool little, Reloc::Model RM,
MipsTargetMachine *TM);
/// ParseSubtargetFeatures - Parses features string setting specified
/// subtarget options. Definition of function is auto generated by tblgen.
void ParseSubtargetFeatures(StringRef CPU, StringRef FS);
bool hasMips32() const { return MipsArchVersion >= Mips32; }
bool hasMips32r2() const { return MipsArchVersion == Mips32r2 ||
MipsArchVersion == Mips64r2; }
bool hasMips64() const { return MipsArchVersion >= Mips64; }
bool hasMips64r2() const { return MipsArchVersion == Mips64r2; }
bool isLittle() const { return IsLittle; }
bool isFP64bit() const { return IsFP64bit; }
bool isNotFP64bit() const { return !IsFP64bit; }
bool isGP64bit() const { return IsGP64bit; }
bool isGP32bit() const { return !IsGP64bit; }
bool isSingleFloat() const { return IsSingleFloat; }
bool isNotSingleFloat() const { return !IsSingleFloat; }
bool hasVFPU() const { return HasVFPU; }
This patch enables llvm to switch between compiling for mips32/mips64 and mips16 on a per function basis. Because this patch is somewhat involved I have provide an overview of the key pieces of it. The patch is written so as to not change the behavior of the non mixed mode. We have tested this a lot but it is something new to switch subtargets so we don't want any chance of regression in the mainline compiler until we have more confidence in this. Mips32/64 are very different from Mip16 as is the case of ARM vs Thumb1. For that reason there are derived versions of the register info, frame info, instruction info and instruction selection classes. Now we register three separate passes for instruction selection. One which is used to switch subtargets (MipsModuleISelDAGToDAG.cpp) and then one for each of the current subtargets (Mips16ISelDAGToDAG.cpp and MipsSEISelDAGToDAG.cpp). When the ModuleISel pass runs, it determines if there is a need to switch subtargets and if so, the owning pointers in MipsTargetMachine are appropriately changed. When 16Isel or SEIsel is run, they will return immediately without doing any work if the current subtarget mode does not apply to them. In addition, MipsAsmPrinter needs to be reset on a function basis. The pass BasicTargetTransformInfo is substituted with a null pass since the pass is immutable and really needs to be a function pass for it to be used with changing subtargets. This will be fixed in a follow on patch. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179118 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-09 19:46:01 +00:00
bool inMips16Mode() const {
switch (OverrideMode) {
case NoOverride:
return InMips16Mode;
case Mips16Override:
return true;
case NoMips16Override:
return false;
}
llvm_unreachable("Unexpected mode");
}
bool inMips16ModeDefault() const {
This patch enables llvm to switch between compiling for mips32/mips64 and mips16 on a per function basis. Because this patch is somewhat involved I have provide an overview of the key pieces of it. The patch is written so as to not change the behavior of the non mixed mode. We have tested this a lot but it is something new to switch subtargets so we don't want any chance of regression in the mainline compiler until we have more confidence in this. Mips32/64 are very different from Mip16 as is the case of ARM vs Thumb1. For that reason there are derived versions of the register info, frame info, instruction info and instruction selection classes. Now we register three separate passes for instruction selection. One which is used to switch subtargets (MipsModuleISelDAGToDAG.cpp) and then one for each of the current subtargets (Mips16ISelDAGToDAG.cpp and MipsSEISelDAGToDAG.cpp). When the ModuleISel pass runs, it determines if there is a need to switch subtargets and if so, the owning pointers in MipsTargetMachine are appropriately changed. When 16Isel or SEIsel is run, they will return immediately without doing any work if the current subtarget mode does not apply to them. In addition, MipsAsmPrinter needs to be reset on a function basis. The pass BasicTargetTransformInfo is substituted with a null pass since the pass is immutable and really needs to be a function pass for it to be used with changing subtargets. This will be fixed in a follow on patch. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179118 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-09 19:46:01 +00:00
return InMips16Mode;
}
bool inMips16HardFloat() const {
return inMips16Mode() && InMips16HardFloat;
}
bool inMicroMipsMode() const { return InMicroMipsMode; }
bool hasDSP() const { return HasDSP; }
bool hasDSPR2() const { return HasDSPR2; }
bool hasMSA() const { return HasMSA; }
bool isLinux() const { return IsLinux; }
bool useSmallSection() const { return UseSmallSection; }
Several changes to Mips backend, experimental fp support being the most important. - Cleanup in the Subtarget info with addition of new features, not all support yet, but they allow the future inclusion of features easier. Among new features, we have : Arch family info (mips1, mips2, ...), ABI info (o32, eabi), 64-bit integer and float registers, allegrex vector FPU (VFPU), single float only support. - TargetMachine now detects allegrex core. - Added allegrex (Mips32r2) sext_inreg instructions. - *Added Float Point Instructions*, handling single float only, and aliased accesses for 32-bit FPUs. - Some cleanup in FP instruction formats and FP register classes. - Calling conventions improved to support mips 32-bit EABI. - Added Asm Printer support for fp cond codes. - Added support for sret copy to a return register. - EABI support added into LowerCALL and FORMAL_ARGS. - MipsFunctionInfo now keeps a virtual register per function to track the sret on function entry until function ret. - MipsInstrInfo FP support into methods (isMoveInstr, isLoadFromStackSlot, ...), FP cond codes mapping and initial FP Branch Analysis. - Two new Mips SDNode to handle fp branch and compare instructions : FPBrcond, FPCmp - MipsTargetLowering : handling different FP classes, Allegrex support, sret return copy, no homing location within EABI, non 32-bit stack objects arguments, and asm constraint for float. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53146 91177308-0d34-0410-b5e6-96231b3b80d8
2008-07-05 19:05:21 +00:00
bool hasStandardEncoding() const { return !inMips16Mode(); }
bool mipsSEUsesSoftFloat() const;
bool enableLongBranchPass() const {
return hasStandardEncoding() || allowMixed16_32();
}
/// Features related to the presence of specific instructions.
bool hasSEInReg() const { return HasSEInReg; }
bool hasCondMov() const { return HasCondMov; }
bool hasSwap() const { return HasSwap; }
bool hasBitCount() const { return HasBitCount; }
bool hasFPIdx() const { return HasFPIdx; }
bool hasExtractInsert() const { return !inMips16Mode() && hasMips32r2(); }
const InstrItineraryData &getInstrItineraryData() const { return InstrItins; }
bool allowMixed16_32() const { return inMips16ModeDefault() |
AllowMixed16_32;}
This patch enables llvm to switch between compiling for mips32/mips64 and mips16 on a per function basis. Because this patch is somewhat involved I have provide an overview of the key pieces of it. The patch is written so as to not change the behavior of the non mixed mode. We have tested this a lot but it is something new to switch subtargets so we don't want any chance of regression in the mainline compiler until we have more confidence in this. Mips32/64 are very different from Mip16 as is the case of ARM vs Thumb1. For that reason there are derived versions of the register info, frame info, instruction info and instruction selection classes. Now we register three separate passes for instruction selection. One which is used to switch subtargets (MipsModuleISelDAGToDAG.cpp) and then one for each of the current subtargets (Mips16ISelDAGToDAG.cpp and MipsSEISelDAGToDAG.cpp). When the ModuleISel pass runs, it determines if there is a need to switch subtargets and if so, the owning pointers in MipsTargetMachine are appropriately changed. When 16Isel or SEIsel is run, they will return immediately without doing any work if the current subtarget mode does not apply to them. In addition, MipsAsmPrinter needs to be reset on a function basis. The pass BasicTargetTransformInfo is substituted with a null pass since the pass is immutable and really needs to be a function pass for it to be used with changing subtargets. This will be fixed in a follow on patch. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179118 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-09 19:46:01 +00:00
This is for an experimental option -mips-os16. The idea is to compile all Mips32 code as Mips16 unless it can't be compiled as Mips 16. For now this would happen as long as floating point instructions are not needed. Probably it would also make sense to compile as mips32 if atomic operations are needed too. There may be other cases too. A module pass prescans the IR and adds the mips16 or nomips16 attribute to functions depending on the functions needs. Mips 16 mode can result in a 40% code compression by utililizing 16 bit encoding of many instructions. The hope is for this to replace the traditional gcc way of dealing with Mips16 code using floating point which involves essentially using soft float but with a library implemented using mips32 floating point. This gcc method also requires creating stubs so that Mips32 code can interact with these Mips 16 functions that have floating point needs. My conjecture is that in reality this traditional gcc method would never win over this new method. I will be implementing the traditional gcc method also. Some of it is already done but I needed to do the stubs to finish the work and those required this mips16/32 mixed mode capability. I have more ideas for to make this new method much better and I think the old method will just live in llvm for anyone that needs the backward compatibility but I don't for what reason that would be needed. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179185 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-10 16:58:04 +00:00
bool os16() const { return Os16;};
// for now constant islands are on for the whole compilation unit but we only
// really use them if in addition we are in mips16 mode
//
static bool useConstantIslands();
unsigned stackAlignment() const { return hasMips64() ? 16 : 8; }
// Grab MipsRegInfo object
const MipsReginfo &getMReginfo() const { return MRI; }
// Grab relocation model
Reloc::Model getRelocationModel() const {return RM;}
This patch enables llvm to switch between compiling for mips32/mips64 and mips16 on a per function basis. Because this patch is somewhat involved I have provide an overview of the key pieces of it. The patch is written so as to not change the behavior of the non mixed mode. We have tested this a lot but it is something new to switch subtargets so we don't want any chance of regression in the mainline compiler until we have more confidence in this. Mips32/64 are very different from Mip16 as is the case of ARM vs Thumb1. For that reason there are derived versions of the register info, frame info, instruction info and instruction selection classes. Now we register three separate passes for instruction selection. One which is used to switch subtargets (MipsModuleISelDAGToDAG.cpp) and then one for each of the current subtargets (Mips16ISelDAGToDAG.cpp and MipsSEISelDAGToDAG.cpp). When the ModuleISel pass runs, it determines if there is a need to switch subtargets and if so, the owning pointers in MipsTargetMachine are appropriately changed. When 16Isel or SEIsel is run, they will return immediately without doing any work if the current subtarget mode does not apply to them. In addition, MipsAsmPrinter needs to be reset on a function basis. The pass BasicTargetTransformInfo is substituted with a null pass since the pass is immutable and really needs to be a function pass for it to be used with changing subtargets. This will be fixed in a follow on patch. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179118 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-09 19:46:01 +00:00
/// \brief Reset the subtarget for the Mips target.
void resetSubtarget(MachineFunction *MF);
};
} // End llvm namespace
#endif