to use the information in the module rather than TargetOptions.
We've had and clang has used the use-soft-float attribute for some
time now so have the backends set a subtarget feature based on
a particular function now that subtargets are created based on
functions and function attributes.
For the one middle end soft float check go ahead and create
an overloadable TargetLowering::useSoftFloat function that
just checks the TargetSubtargetInfo in all cases.
Also remove the command line option that hard codes whether or
not soft-float is set by using the attribute for all of the
target specific test cases - for the generic just go ahead and
add the attribute in the one case that showed up.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237079 91177308-0d34-0410-b5e6-96231b3b80d8
The TargetRegistry is just a namespace-like class, instantiated in one
place to use a range-based for loop. Instead, expose access to the
registry via a range-based 'targets()' function instead. This makes most
uses a bit awkward/more verbose - but eventually we should just add a
range-based find_if function which will streamline these functions. I'm
happy to mkae them a bit awkward in the interim as encouragement to
improve the algorithms in time.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237059 91177308-0d34-0410-b5e6-96231b3b80d8
This is a less ambitious version of:
http://reviews.llvm.org/rL236546
because that was reverted in:
http://reviews.llvm.org/rL236600
because it caused memory corruption that wasn't related to FMF
but was actually due to making nodes with 2 operands derive from a
plain SDNode rather than a BinarySDNode.
This patch adds the minimum plumbing necessary to use IR-level
fast-math-flags (FMF) in the backend without actually using
them for anything yet. This is a follow-on to:
http://reviews.llvm.org/rL235997
...which split the existing nsw / nuw / exact flags and FMF
into their own struct.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237046 91177308-0d34-0410-b5e6-96231b3b80d8
ValueTracking.
This matching functionality is useful in more than just InstCombine, so
make it available in ValueTracking.
NFC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236998 91177308-0d34-0410-b5e6-96231b3b80d8
The code that builds the dependence graph assumes that two PseudoSourceValues
don't alias. In a tail calling function two FixedStackObjects might refer to the
same location. Worse 'immutable' fixed stack objects like function arguments are
not immutable and will be clobbered.
Change this so that a load from a FixedStackObject is not invariant in a tail
calling function and don't return a PseudoSourceValue for an instruction in tail
calling functions when building the dependence graph so that we handle function
arguments conservatively.
Fix for PR23459.
rdar://20740035
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236916 91177308-0d34-0410-b5e6-96231b3b80d8
This new class in a global context contain arch-specific knowledge in order
to provide LLVM libraries, tools and projects with the ability to understand
the architectures. For now, only FPU, ARCH and ARCH extensions on ARM are
supported.
Current behaviour it to parse from free-text to enum values and back, so that
all users can share the same parser and codes. This simplifies a lot both the
ASM/Obj streamers in the back-end (where this came from), and the front-end
parsers for command line arguments (where this is going to be used next).
The previous implementation, using .def/.h includes is deprecated due to its
inflexibility to be built without the backend support and for being too
cumbersome. As more architectures join this scheme, and as more features of
such architectures are added (such as hardware features, type sizes, etc) into
a full blown TargetDescription class, having a set of classes is the most
sane implementation.
The ultimate goal of this refactor both LLVM's and Clang's target description
classes into one unique interface, so that we can de-duplicate and standardise
the descriptions, as well as make it available for other front-ends, tools,
etc.
The FPU parsing for command line options in Clang has been converted to use
this new library and a number of aliases were added for compatibility:
* A bogus neon-vfpv3 alias (neon defaults to vfp3)
* armv5/v6
* {fp4/fp5}-{sp/dp}-d16
Next steps:
* Port Clang's ARCH/EXT parsing to use this library.
* Create a TableGen back-end to generate this information.
* Run this TableGen process regardless of which back-ends are built.
* Expose more information and rename it to TargetDescription.
* Continue re-factoring Clang to use as much of it as possible.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236900 91177308-0d34-0410-b5e6-96231b3b80d8
This changes the shape of the statepoint intrinsic from:
@llvm.experimental.gc.statepoint(anyptr target, i32 # call args, i32 unused, ...call args, i32 # deopt args, ...deopt args, ...gc args)
to:
@llvm.experimental.gc.statepoint(anyptr target, i32 # call args, i32 flags, ...call args, i32 # transition args, ...transition args, i32 # deopt args, ...deopt args, ...gc args)
This extension offers the backend the opportunity to insert (somewhat) arbitrary code to manage the transition from GC-aware code to code that is not GC-aware and back.
In order to support the injection of transition code, this extension wraps the STATEPOINT ISD node generated by the usual lowering lowering with two additional nodes: GC_TRANSITION_START and GC_TRANSITION_END. The transition arguments that were passed passed to the intrinsic (if any) are lowered and provided as operands to these nodes and may be used by the backend during code generation.
Eventually, the lowering of the GC_TRANSITION_{START,END} nodes should be informed by the GC strategy in use for the function containing the intrinsic call; for now, these nodes are instead replaced with no-ops.
Differential Revision: http://reviews.llvm.org/D9501
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236888 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
I noticed this bug when deubging a WIP on LSR. I wonder whether and how we
should add a regression test for this.
Test Plan: no tests failed.
Reviewers: atrick
Subscribers: hfinkel, llvm-commits
Differential Revision: http://reviews.llvm.org/D9536
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236887 91177308-0d34-0410-b5e6-96231b3b80d8
Will be re-enabled with missing changes for ConstantFPSDNode and
fixes for wrong locations due to constant coalescing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236758 91177308-0d34-0410-b5e6-96231b3b80d8
This commit enables the tests located in test/YAMLParser directory.
Those tests were never actually enabled, as llvm-lit didn't pick up the
files with the 'data' extension. The commit renames those test files to files
with the 'test' extension so that llvm-lit would find them.
This commit also modifies yaml-bench so that it returns an error status
if an error occurred during parsing. It also adds the '-use-color'
command line option to yaml-bench (to make sure that file check matches
the error messages in the output stream).
This commit modifies some of the renamed tests so that they wouldn't
fail. It gets rid of XFAILs and uses the 'not' command instead for
some of the tests that have to fail during parsing. This commit
also adds some 'FIXME' comments to a couple of tests that are
supposed to fail but currently pass because of various bugs
in the implementation of the yaml parser.
Reviewers: Justin Bogner
Differential Revision: http://reviews.llvm.org/D9448
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236754 91177308-0d34-0410-b5e6-96231b3b80d8
This change adds support for the SHT_MIPS_ABIFLAGS section
reading/writing to the obj2yaml and yaml2obj tools.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236738 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This gives frontend more precise control over collected coverage
information. User can still override these options by passing
-mllvm flags.
No functionality change.
Test Plan: regression test suite.
Reviewers: kcc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9539
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236687 91177308-0d34-0410-b5e6-96231b3b80d8
Renames the original CreateGCStatepoint to CreateGCStatepointCall, and
moves invoke creating functionality from PlaceSafepoints.cpp to
IRBuilder.cpp.
This changes the labels generated for PlaceSafepoints/invokes.ll so use
a regex there to make the basic block labels more resilient.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236672 91177308-0d34-0410-b5e6-96231b3b80d8
This commit changes the 'skip' method in the 'KeyValueNode' class
to ensure that it doesn't dereference a null pointer when calling
the 'skip' method of its value child node. It also adds a unittest
that ensures that the crash doesn't occur.
This change is motivated by a patch that implements parsing
of YAML block scalars (http://reviews.llvm.org/D9503), as one
of the unittests in that patch triggered this problem.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236669 91177308-0d34-0410-b5e6-96231b3b80d8
This makes use of the new API which can remove attributes from a set given a builder.
This is much faster than creating a temporary set and reduces llc time by about 0.3% which was all spent creating temporary attributes sets on the context.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236668 91177308-0d34-0410-b5e6-96231b3b80d8
Prior to this change we would have to construct a temporary AttributeSet (which isn't temporary at all given that its allocated on the context), just to contain the attributes in the builder, then call remove on that.
Now we can just remove any attributes from the (lightweight and really temporary) builder itself.
Will be used in a future commit to remove some temporary attributes sets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236666 91177308-0d34-0410-b5e6-96231b3b80d8
Since the coverage mapping reader and the instrprof reader were
emitting a shared set of error codes, the error messages you'd get
back from llvm-cov were ambiguous about what was actually wrong. Add
another error category to fix this.
I've also improved the wording on a couple of the instrprof errors,
for consistency.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236665 91177308-0d34-0410-b5e6-96231b3b80d8
Specifically, this patch correctly respects the -demangle option,
and additionally adds a hidden --relative-address option allows
input addresses to be relative to the module load address instead
of absolute addresses into the image.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236653 91177308-0d34-0410-b5e6-96231b3b80d8
Don't create names for temporary symbols when using an object streamer.
The names never make it to the output anyway. From the starting point
of r236629, my heap profile says this drops peak memory usage from 1100
MB to 1058 MB for CodeGen of `verify-uselistorder`, a savings of almost
4% on peak memory, and removes `StringMap<bool, BumpPtrAllocator...>`
from the profile entirely.
(I'm looking at `llc` memory usage on `verify-uselistorder.lto.opt.bc`;
see r236629 for details.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236642 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This helper function creates a ctor function, which calls sanitizer's
init function with given arguments. This constructor is then expected
to be added to module's ctors. The patch helps unifying how sanitizer
constructor functions are created, and how init functions are called
across all sanitizers.
Reviewers: kcc, samsonov
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8777
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236627 91177308-0d34-0410-b5e6-96231b3b80d8
The patch disabled unrolling in loop vectorization pass when VF==1 on x86 architecture,
by setting MaxInterleaveFactor to 1. Unrolling in loop vectorization pass may introduce
the cost of overflow check, memory boundary check and extra prologue/epilogue code when
regular unroller will unroll the loop another time. Disable it when VF==1 remove the
unnecessary cost on x86. The same can be done for other platforms after verifying
interleaving/memory bound checking to be not perf critical on those platforms.
Differential Revision: http://reviews.llvm.org/D9515
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236613 91177308-0d34-0410-b5e6-96231b3b80d8
For accessors in the `Statepoint` class, use symbolic constants for
offsets into the argument vector instead of literals. This makes the
code intent clearer and simpler to change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236566 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds the minimum plumbing necessary to use IR-level
fast-math-flags (FMF) in the backend without actually using
them for anything yet. This is a follow-on to:
http://reviews.llvm.org/rL235997
...which split the existing nsw / nuw / exact flags and FMF
into their own struct.
There are 2 structural changes here:
1. The main diff is that we're preparing to extend the optimization
flags to affect more than just binary SDNodes. Eg, IR intrinsics
( https://llvm.org/bugs/show_bug.cgi?id=21290 ) or non-binop nodes
that don't even exist in IR such as FMA, FNEG, etc.
2. The other change is that we're actually copying the FP fast-math-flags
from the IR instructions to SDNodes.
Differential Revision: http://reviews.llvm.org/D8900
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236546 91177308-0d34-0410-b5e6-96231b3b80d8
Note, this is a reapplication of r236515 with a fix to not assert on non-register operands, but instead only handle them until the subsequent commit. Original commit message follows.
The code was basically the same here already. Just added an out parameter for a vector of seen defs so that UpdatePredRedefs can call StepForward first, then do its own post processing on the seen defs.
Will be used in the next commit to also handle regmasks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236538 91177308-0d34-0410-b5e6-96231b3b80d8
This adds intrinsics to allow access to all of the z13 vector instructions.
Note that instructions whose semantics can be described by standard LLVM IR
do not get any intrinsics.
For each instructions whose semantics *cannot* (fully) be described, we
define an LLVM IR target-specific intrinsic that directly maps to this
instruction.
For instructions that also set the condition code, the LLVM IR intrinsic
returns the post-instruction CC value as a second result. Instruction
selection will attempt to detect code that compares that CC value against
constants and use the condition code directly instead.
Based on a patch by Richard Sandiford.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236527 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit 963cdbccf6e5578822836fd9b2ebece0ba9a60b7 (ie r236514)
This is to get the bots green while i investigate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236518 91177308-0d34-0410-b5e6-96231b3b80d8
The code was basically the same here already. Just added an out parameter for a vector of seen defs so that UpdatePredRedefs can call StepForward first, then do its own post processing on the seen defs.
Will be used in the next commit to also handle regmasks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236514 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r236360.
This change exposed a bug in WinEHPrepare by opting win32 code into EH
preparation. We already knew that WinEHPrepare has bugs, and is the
status quo for x64, so I don't think that's a reason to hold off on this
change. I disabled exceptions in the sanitizer tests in r236505 and an
earlier revision.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236508 91177308-0d34-0410-b5e6-96231b3b80d8
This patch introduces a new pass that computes the safe point to insert the
prologue and epilogue of the function.
The interest is to find safe points that are cheaper than the entry and exits
blocks.
As an example and to avoid regressions to be introduce, this patch also
implements the required bits to enable the shrink-wrapping pass for AArch64.
** Context **
Currently we insert the prologue and epilogue of the method/function in the
entry and exits blocks. Although this is correct, we can do a better job when
those are not immediately required and insert them at less frequently executed
places.
The job of the shrink-wrapping pass is to identify such places.
** Motivating example **
Let us consider the following function that perform a call only in one branch of
a if:
define i32 @f(i32 %a, i32 %b) {
%tmp = alloca i32, align 4
%tmp2 = icmp slt i32 %a, %b
br i1 %tmp2, label %true, label %false
true:
store i32 %a, i32* %tmp, align 4
%tmp4 = call i32 @doSomething(i32 0, i32* %tmp)
br label %false
false:
%tmp.0 = phi i32 [ %tmp4, %true ], [ %a, %0 ]
ret i32 %tmp.0
}
On AArch64 this code generates (removing the cfi directives to ease
readabilities):
_f: ; @f
; BB#0:
stp x29, x30, [sp, #-16]!
mov x29, sp
sub sp, sp, #16 ; =16
cmp w0, w1
b.ge LBB0_2
; BB#1: ; %true
stur w0, [x29, #-4]
sub x1, x29, #4 ; =4
mov w0, wzr
bl _doSomething
LBB0_2: ; %false
mov sp, x29
ldp x29, x30, [sp], #16
ret
With shrink-wrapping we could generate:
_f: ; @f
; BB#0:
cmp w0, w1
b.ge LBB0_2
; BB#1: ; %true
stp x29, x30, [sp, #-16]!
mov x29, sp
sub sp, sp, #16 ; =16
stur w0, [x29, #-4]
sub x1, x29, #4 ; =4
mov w0, wzr
bl _doSomething
add sp, x29, #16 ; =16
ldp x29, x30, [sp], #16
LBB0_2: ; %false
ret
Therefore, we would pay the overhead of setting up/destroying the frame only if
we actually do the call.
** Proposed Solution **
This patch introduces a new machine pass that perform the shrink-wrapping
analysis (See the comments at the beginning of ShrinkWrap.cpp for more details).
It then stores the safe save and restore point into the MachineFrameInfo
attached to the MachineFunction.
This information is then used by the PrologEpilogInserter (PEI) to place the
related code at the right place. This pass runs right before the PEI.
Unlike the original paper of Chow from PLDI’88, this implementation of
shrink-wrapping does not use expensive data-flow analysis and does not need hack
to properly avoid frequently executed point. Instead, it relies on dominance and
loop properties.
The pass is off by default and each target can opt-in by setting the
EnableShrinkWrap boolean to true in their derived class of TargetPassConfig.
This setting can also be overwritten on the command line by using
-enable-shrink-wrap.
Before you try out the pass for your target, make sure you properly fix your
emitProlog/emitEpilog/adjustForXXX method to cope with basic blocks that are not
necessarily the entry block.
** Design Decisions **
1. ShrinkWrap is its own pass right now. It could frankly be merged into PEI but
for debugging and clarity I thought it was best to have its own file.
2. Right now, we only support one save point and one restore point. At some
point we can expand this to several save point and restore point, the impacted
component would then be:
- The pass itself: New algorithm needed.
- MachineFrameInfo: Hold a list or set of Save/Restore point instead of one
pointer.
- PEI: Should loop over the save point and restore point.
Anyhow, at least for this first iteration, I do not believe this is interesting
to support the complex cases. We should revisit that when we motivating
examples.
Differential Revision: http://reviews.llvm.org/D9210
<rdar://problem/3201744>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236507 91177308-0d34-0410-b5e6-96231b3b80d8
and avoid cloning unused decls into every partition.
Module partitioning showed up as a source of significant overhead when I
profiled some trivial test cases. Avoiding the overhead of partitionging
for uncalled functions helps to mitigate this.
This change also means that it is no longer necessary to have a
LazyEmittingLayer underneath the CompileOnDemand layer, since the
CompileOnDemandLayer will not extract or emit function bodies until they are
called.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236465 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds the --load-address command line option to
llvm-pdbdump, which dumps all addresses assuming the module has
loaded at the specified address.
Additionally, this patch adds an option to llvm-pdbdump to support
dumping of public symbols (i.e. symbols with external linkage).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236342 91177308-0d34-0410-b5e6-96231b3b80d8
This pass is responsible for constructing the EH registration object
that gets linked into fs:00, which is all it does in this change. In the
future, it will also insert stores to update the EH state number.
I considered keeping this functionality in WinEHPrepare, but it's pretty
separable and X86 specific. It has conceptually very little to do with
the task of WinEHPrepare, which is currently outlining. WinEHPrepare is
also in theory useful on ARM, but this logic is pretty x86 specific.
Reviewers: andrew.w.kaylor, majnemer
Differential Revision: http://reviews.llvm.org/D9422
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236339 91177308-0d34-0410-b5e6-96231b3b80d8
Patch from dexonsmith. The call to toInt() was calling compareTo() which
in some cases would call back to toInt(), creating an infinite loop.
Fixed by simplifying the logic in compareTo() to avoid the co-recursion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236326 91177308-0d34-0410-b5e6-96231b3b80d8
Found by -Wpessimizing-move, no functional change. The APFloat and
PassManager change doesn't affect codegen as returning a by-value
argument will always result in a move.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236316 91177308-0d34-0410-b5e6-96231b3b80d8
This change is the second of 3 patches to add support for specifying
the profile output from the command line via -fprofile-instr-generate=<path>,
where the specified output path/file will be overridden by the
LLVM_PROFILE_FILE environment variable.
This patch adds the necessary support to the llvm instrumenter, specifically
a new member of GCOVOptions for clang to save the specified filename, and
support for calling the new compiler-rt interface from __llvm_profile_init.
Patch by Teresa Johnson. Thanks!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236288 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The private constructor for ScaledNumber was using uint64_t instead of
DigitsT. This was preventing instantiations of ScaledNumber with
anything other than uint64_t types.
In implementing the tests, I ran into another issue. Operators >>= and
<<= did not have variants for accepting other ScaledNumber as the shift
argument. This is expected by the SCALED_NUMBER_BOP.
It makes no sense to allow shifting a ScaledNumber by another
ScaledNumber, so the patch includes two new templates for shifting
ScaledNumbers.
Reviewers: dexonsmith
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9350
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236232 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This pathc add convenient overloads for CreateInsertElement and CreateExtractElement methods in IRBuilder
where vector index can be uint64_t instead of Value*.
Test Plan: Unit test included.
Reviewers: majnemer
Reviewed By: majnemer
Subscribers: majnemer, llvm-commits
Differential Revision: http://reviews.llvm.org/D9347
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236214 91177308-0d34-0410-b5e6-96231b3b80d8
Many of the callers already have the pointer type anyway, and for the
couple of callers that don't it's pretty easy to call PointerType::get
on the pointee type and address space.
This avoids LLParser from using PointerType::getElementType when parsing
GlobalAliases from IR.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236160 91177308-0d34-0410-b5e6-96231b3b80d8
Finish off PR23080 by renaming the debug info IR constructs from `MD*`
to `DI*`. The last of the `DIDescriptor` classes were deleted in
r235356, and the last of the related typedefs removed in r235413, so
this has all baked for about a week.
Note: If you have out-of-tree code (like a frontend), I recommend that
you get everything compiling and tests passing with the *previous*
commit before updating to this one. It'll be easier to keep track of
what code is using the `DIDescriptor` hierarchy and what you've already
updated, and I think you're extremely unlikely to insert bugs. YMMV of
course.
Back to *this* commit: I did this using the rename-md-di-nodes.sh
upgrade script I've attached to PR23080 (both code and testcases) and
filtered through clang-format-diff.py. I edited the tests for
test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns
were off-by-three. It should work on your out-of-tree testcases (and
code, if you've followed the advice in the previous paragraph).
Some of the tests are in badly named files now (e.g.,
test/Assembler/invalid-mdcompositetype-missing-tag.ll should be
'dicompositetype'); I'll come back and move the files in a follow-up
commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236120 91177308-0d34-0410-b5e6-96231b3b80d8
This is a preliminary step to using the IR-level floating-point fast-math-flags in the SDAG (D8900).
In this patch, we introduce the optimization flags as their own struct. As noted in the TODO comment,
we should eventually share this data between the IR passes and the backend.
We also switch the existing nsw / nuw / exact bit functionality of the BinaryWithFlagsSDNode class to
use the new struct.
The tradeoff is that instead of using the free but limited space of SDNode's SubclassData, we add a
data member to the subclass. This means we don't have to repeat all of the get/set methods per flag,
but we're potentially adding size to all nodes of this subclassi type.
In practice on 64-bit systems (measured on Linux and MacOS X), there is no size difference between an
SDNode and BinaryWithFlagsSDNode after this change: they're both 80 bytes. This means that we had at
least one free byte to play with due to struct alignment.
Differential Revision: http://reviews.llvm.org/D9325
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235997 91177308-0d34-0410-b5e6-96231b3b80d8
[DebugInfo] Add debug locations to constant SD nodes
This adds debug location to constant nodes of Selection DAG and updates
all places that create constants to pass debug locations
(see PR13269).
Can't guarantee that all locations are correct, but in a lot of cases choice
is obvious, so most of them should be. At least all tests pass.
Tests for these changes do not cover everything, instead just check it for
SDNodes, ARM and AArch64 where it's easy to get incorrect locations on
constants.
This is not complete fix as FastISel contains workaround for wrong debug
locations, which drops locations from instructions on processing constants,
but there isn't currently a way to use debug locations from constants there
as llvm::Constant doesn't cache it (yet). Although this is a bit different
issue, not directly related to these changes.
Differential Revision: http://reviews.llvm.org/D9084
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235989 91177308-0d34-0410-b5e6-96231b3b80d8
This adds debug location to constant nodes of Selection DAG and updates
all places that create constants to pass debug locations
(see PR13269).
Can't guarantee that all locations are correct, but in a lot of cases choice
is obvious, so most of them should be. At least all tests pass.
Tests for these changes do not cover everything, instead just check it for
SDNodes, ARM and AArch64 where it's easy to get incorrect locations on
constants.
This is not complete fix as FastISel contains workaround for wrong debug
locations, which drops locations from instructions on processing constants,
but there isn't currently a way to use debug locations from constants there
as llvm::Constant doesn't cache it (yet). Although this is a bit different
issue, not directly related to these changes.
Differential Revision: http://reviews.llvm.org/D9084
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235977 91177308-0d34-0410-b5e6-96231b3b80d8
As a space optimization, this instruction would just encode the pointer
type of the first operand and use the knowledge that the second and
third operands would be of the pointee type of the first. When typed
pointers go away, this assumption will no longer be available - so
encode the type of the second operand explicitly and rely on that for
the third.
Test case added to demonstrate the backwards compatibility concern,
which only comes up when the definition of the second operand comes
after the use (hence the weird basic block sequence) - at which point
the type needs to be explicitly encoded in the bitcode and the record
length changes to accommodate this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235966 91177308-0d34-0410-b5e6-96231b3b80d8
Defaulting to AShr without consulting the target MCAsmInfo isn't OK.
Add a flag to fix that. Keep it off for now: target migrations will
follow in separate commits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235951 91177308-0d34-0410-b5e6-96231b3b80d8
Reverse libLTO's default behaviour for preserving use-list order in
bitcode, and add API for controlling it. The default setting is now
`false` (don't preserve them), which is consistent with `clang`'s
default behaviour.
Users of libLTO should call `lto_codegen_should_embed_uselists(CG,true)`
prior to calling `lto_codegen_write_merged_modules()` whenever the
output file isn't part of the production workflow in order to reproduce
results with subsequent calls to `llc`.
(I haven't added tests since `llvm-lto` (the test tool for LTO) doesn't
support bitcode output, and even if it did: there isn't actually a good
way to test whether a tool has passed the flag. If the order is already
"natural" (if the order will already round-trip) then no use-list
directives are emitted at all. At some point I'll circle back to add
tests to `llvm-as` (etc.) that they actually respect the flag, at which
point I can somehow add a test here as well.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235943 91177308-0d34-0410-b5e6-96231b3b80d8
These look like copy/paste errors, and shouldn't have the "prior to"
qualifier. Each API was introduced at the given values of
`LTO_API_VERSION`. The "prior to" in other doxygen comments is because
I couldn't easily differentiate between versions 1 and 2 when I added
these comments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235925 91177308-0d34-0410-b5e6-96231b3b80d8
Add IR support for `Metadata` attachments. Assembly and bitcode support
will follow shortly, but for now we just have unit tests. This is part
of PR23340.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235783 91177308-0d34-0410-b5e6-96231b3b80d8
Make room for more than just `Function::isMaterializable()` in the
`GlobalObject` subclass data bitfield. Since we're treating it like a
bitfield, change `Function::Function()` to zero-out the whole thing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235770 91177308-0d34-0410-b5e6-96231b3b80d8
This introduces an intrinsic called llvm.eh.exceptioncode. It is lowered
by copying the EAX value live into whatever basic block it is called
from. Obviously, this only works if you insert it late during codegen,
because otherwise mid-level passes might reschedule it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235768 91177308-0d34-0410-b5e6-96231b3b80d8
AsmPrinter owns the OutStreamer, so an owning pointer makes sense here. Using a
reference for this is crufty.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235752 91177308-0d34-0410-b5e6-96231b3b80d8
This should make it clear under which narrow circumstances implicit
physreg uses are okay when rematerializing and prevent people from
accidentally allowing too much when overriding
isReallyTriviallyReMaterializable() even with the weaker assert in the
RegisterCoalescer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235679 91177308-0d34-0410-b5e6-96231b3b80d8
Currently symbol names are printed in quotes if it contains something
outside of the arbitrary set of characters that isAcceptableChar tests
for. On somem targets, it is never OK to print a symbol name in quotes
so allow targets to opt out of this behavior.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235670 91177308-0d34-0410-b5e6-96231b3b80d8
Add assembler/disassembler support for dcbt/dcbtst (and aliases) with the hint
field specified (non-zero). Unforunately, the syntax for this instruction is
special in that it differs for server vs. embedded cores:
dcbt ra, rb, th [server]
dcbt th, ra, rb [embedded]
where th can be omitted when it is 0. dcbtst is the same. Thus we need to play
games in the parser and the printer to flip the operands around on the embedded
cores. We'll use the server syntax as the default (binutils currently uses the
embedded form by default, but IBM is changing that).
We also stop marking dcbtst as having unmodeled side effects (this is not
necessary, it is just a hint like dcbt -- noticed by inspection, so no separate
test case).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235657 91177308-0d34-0410-b5e6-96231b3b80d8
(reverted in r235533)
Original commit message:
"Calls to llvm::Value::mutateType are becoming extra-sensitive now that
instructions have extra type information that will not be derived from
operands or result type (alloca, gep, load, call/invoke, etc... ). The
special-handling for mutateType will get more complicated as this work
continues - it might be worth making mutateType virtual & pushing the
complexity down into the classes that need special handling. But with
only two significant uses of mutateType (vectorization and linking) this
seems OK for now.
Totally open to ideas/suggestions/improvements, of course.
With this, and a bunch of exceptions, we can roundtrip an indirect call
site through bitcode and IR. (a direct call site is actually trickier...
I haven't figured out how to deal with the IR deserializer's lazy
construction of Function/GlobalVariable decl's based on the type of the
entity which means looking through the "pointer to T" type referring to
the global)"
The remapping done in ValueMapper for LTO was insufficient as the types
weren't correctly mapped (though I was using the post-mapped operands,
some of those operands might not have been mapped yet so the type
wouldn't be post-mapped yet). Instead use the pre-mapped type and
explicitly map all the types.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235651 91177308-0d34-0410-b5e6-96231b3b80d8
Specifically, if a pointer accesses different underlying objects in each
iteration, don't look through the phi node defining the pointer.
The motivating case is the underlyling-objects-2.ll testcase. Consider
the loop nest:
int **A;
for (i)
for (j)
A[i][j] = A[i-1][j] * B[j]
This loop is transformed by Load-PRE to stash away A[i] for the next
iteration of the outer loop:
Curr = A[0]; // Prev_0
for (i: 1..N) {
Prev = Curr; // Prev = PHI (Prev_0, Curr)
Curr = A[i];
for (j: 0..N)
Curr[j] = Prev[j] * B[j]
}
Since A[i] and A[i-1] are likely to be independent pointers,
getUnderlyingObjects should not assume that Curr and Prev share the same
underlying object in the inner loop.
If it did we would try to dependence-analyze Curr and Prev and the
analysis of the corresponding SCEVs would fail with non-constant
distance.
To fix this, the getUnderlyingObjects API is extended with an optional
LoopInfo parameter. This is effectively what controls whether we want
the above behavior or the original. Currently, I only changed to use
this approach for LoopAccessAnalysis.
The other testcase is to guard the opposite case where we do want to
look through the loop PHI. If we step through an array by incrementing
a pointer, the underlying object is the incoming value of the phi as the
loop is entered.
Fixes rdar://problem/19566729
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235634 91177308-0d34-0410-b5e6-96231b3b80d8
Move isDereferenceablePointer function to Analysis. This function recursively tracks dereferencability over a chain of values like other functions in ValueTracking.
This refactoring is motivated by further changes to support dereferenceable_or_null attribute (http://reviews.llvm.org/D8650). isDereferenceablePointer will be extended to perform context-sensitive analysis and IR is not a good place to have such functionality.
Patch by: Artur Pilipenko <apilipenko@azulsystems.com>
Differential Revision: reviews.llvm.org/D9075
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235611 91177308-0d34-0410-b5e6-96231b3b80d8
This removes the -sehprepare flag and makes __C_specific_handler
functions always to use WinEHPrepare.
This was tested by building all of chromium_builder_tests and running a
few tests that use SEH, but if something breaks, we can revert this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235557 91177308-0d34-0410-b5e6-96231b3b80d8
I added the poisoning back in r76891 (2009) because of some bugs in
Unladen Swallow, and then Evan Cheng added the setRangeWritable() call
in r81308. Profiling a Release+Asserts build on Windows shows that this
memory protection call is actually very expensive. 4 seconds of a 70
second Clang compilation are spent in VirtualQuery. These days we have
more reliable tools like ASan to find these kinds of bugs, so we can go
ahead and retire these checks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235542 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r235458.
It looks like this might be breaking something LTO-ish. Looking into it
& will recommit with a fix/test case/etc once I've got more to go on.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235533 91177308-0d34-0410-b5e6-96231b3b80d8
This causes OpKind and all the bitfields after it to use 32-bit load/stores instead of i24's for the existing bitfields.
Bugs will be filed to track whether clang and llvm could have generated the 32-bit operations in the front-end or optimizer.
Reviewed by Rafael.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235528 91177308-0d34-0410-b5e6-96231b3b80d8
X86 backend.
The code generated for symbolic targets is identical to the code generated for
constant targets, except that a relocation is emitted to fix up the actual
target address at link-time. This allows IR and object files containing
patchpoints to be cached across JIT-invocations where the target address may
change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235483 91177308-0d34-0410-b5e6-96231b3b80d8
Without pointee types the space optimization of storing only the pointer
type and not the value type won't be viable - so add the extra type
information that would be missing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235475 91177308-0d34-0410-b5e6-96231b3b80d8
Without pointee types the space optimization of storing only the pointer
type and not the value type won't be viable - so add the extra type
information that would be missing.
Storeatomic coming soon.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235474 91177308-0d34-0410-b5e6-96231b3b80d8
Add a flag to lib/Linker (and `llvm-link`) to override linkage rules.
When set, the functions in the source module *always* replace those in
the destination module.
The `llvm-link` option is `-override=abc.ll`. All the "regular" modules
are loaded and linked first, followed by the `-override` modules. This
is useful for debugging workflows where some subset of the module (e.g.,
a single function) is extracted into a separate file where it's
optimized differently, before being merged back in.
Patch by Luqman Aden!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235473 91177308-0d34-0410-b5e6-96231b3b80d8
Calls to llvm::Value::mutateType are becoming extra-sensitive now that
instructions have extra type information that will not be derived from
operands or result type (alloca, gep, load, call/invoke, etc... ). The
special-handling for mutateType will get more complicated as this work
continues - it might be worth making mutateType virtual & pushing the
complexity down into the classes that need special handling. But with
only two significant uses of mutateType (vectorization and linking) this
seems OK for now.
Totally open to ideas/suggestions/improvements, of course.
With this, and a bunch of exceptions, we can roundtrip an indirect call
site through bitcode and IR. (a direct call site is actually trickier...
I haven't figured out how to deal with the IR deserializer's lazy
construction of Function/GlobalVariable decl's based on the type of the
entity which means looking through the "pointer to T" type referring to
the global)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235458 91177308-0d34-0410-b5e6-96231b3b80d8
Remove the `DIArray` and `DITypeArray` typedefs, preferring the
underlying types (`DebugNodeArray` and `MDTypeRefArray`, respectively).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235413 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
MemorySSA uses this algorithm as well, and this enables us to reuse the code in both places.
There are no actual algorithm or datastructure changes in here, just code movement.
Reviewers: qcolombet, chandlerc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9118
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235406 91177308-0d34-0410-b5e6-96231b3b80d8
Keep the old SEH fan-in lowering on by default for now, since projects
rely on it. This will make it easy to test this change with a simple
flag flip.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235399 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This directive is exactly the same as .asciz, except it's only used by MIPS.
It is used to store null terminated strings in object files.
Reviewers: rafael, dsanders, echristo
Reviewed By: dsanders, echristo
Subscribers: echristo, llvm-commits
Differential Revision: http://reviews.llvm.org/D7530
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235382 91177308-0d34-0410-b5e6-96231b3b80d8
Delete subclasses of (the already defunct) `DIScope`, updating users to
use the raw pointers from the `Metadata` hierarchy directly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235356 91177308-0d34-0410-b5e6-96231b3b80d8
Delete subclasses of (the already deleted) `DIType` in favour of
directly using pointers from the `Metadata` hierarchy.
While `DICompositeType` wraps `MDCompositeTypeBase` and `DIDerivedType`
wraps `MDDerivedTypeBase`, most uses of each really meant the more
specific `MDCompositeType` and `MDDerivedType`.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235351 91177308-0d34-0410-b5e6-96231b3b80d8
This is the last major parent class, so I'll probably start deleting
classes in batches now. Looks like many of the references to the DI*
hierarchy were updated organically along the way.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235331 91177308-0d34-0410-b5e6-96231b3b80d8
Replace uses of `DIScope` with `MDScope*`. There was one spot where
I've left an `MDScope*` uninitialized (where `DIScope` would have been
default-initialized to `nullptr`) -- this is intentional, since the
if/else that follows should unconditional assign it to a value.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235327 91177308-0d34-0410-b5e6-96231b3b80d8
The current implementations could exhibit some behavior differences:
raw_fd_ostream: Whatever the underlying fd does with seek+write. In a normal
file, the write position would be back to the old offset.
raw_svector_ostream: The write position is always the end of the stream, so
after pwrite the write position would be the new end. This matches what OS_X
(all BSD?) do with a pwrite in a O_APPEND fd.
Given that we don't need that feature and don't use O_APPEND a lot in LLVM,
just disallow it.
I am open to suggestions on renaming pwrite to something else, but this fixes
the issue for now.
Thanks to Yaron Keren for reporting it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235303 91177308-0d34-0410-b5e6-96231b3b80d8
Delete `DIDescriptor` and update the remaining users. I'll follow-up by
deleting subclasses in manageable groups (top-down).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235248 91177308-0d34-0410-b5e6-96231b3b80d8
Stop using `DIDescriptor` and its subclasses in the `DebugInfoFinder`
API, as well as the rest of the API hanging around in `DebugInfo.h`.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235240 91177308-0d34-0410-b5e6-96231b3b80d8
Previously DebugInfoPDB could only load data for a PDB given a
path to the PDB. It could not open an EXE and find the matching
PDB and verify it matched, etc. This patch adds support for that
so that we can simply load debug information for a PDB directly.
Additionally, this patch extends DebugInfoPDB to support getting
source and line information for symbols.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235237 91177308-0d34-0410-b5e6-96231b3b80d8
The implementation of this GEP::getResultElementType will be refactored
to either rely on a member variable, or recompute the value from the
indicies (any preferences?).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235236 91177308-0d34-0410-b5e6-96231b3b80d8
Similar to r235222, but for the weak symbol case.
In an "ideal" assembler/object format an expression would always refer to the
final value and A-B would only be computed from a section in the same
comdat as A and B with A and B strong.
Unfortunately that is not the case with debug info on ELF, so we need an
heuristic. Since we need an heuristic, we may as well use the same one as
gas:
* call weak_sym : produces a relocation, even if in the same section.
* A - weak_sym and weak_sym -A: don't produce a relocation if we can
compute it.
This fixes pr23272 and changes the fix of pr22815 to match what gas does.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235227 91177308-0d34-0410-b5e6-96231b3b80d8
Now (with a few carefully placed suppressions relating to general type
serialization, etc) we can round trip a simple load through bitcode and
textual IR without calling getElementType on a PointerType.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235221 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch adds legalization support to operate on FP16 as a load/store type
and do operations on it as floats.
Tests for ARM are added to test/CodeGen/ARM/fp16-promote.ll
Reviewers: srhines, t.p.northover
Differential Revision: http://reviews.llvm.org/D8755
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235215 91177308-0d34-0410-b5e6-96231b3b80d8
When debugging LTO issues with ld64, we use -save-temps to save the merged
optimized bitcode file, then invoke ld64 again on the single bitcode file.
The saved bitcode file is already internalized, so we can call
lto_codegen_set_should_internalize and skip running internalization again.
rdar://20227235
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235211 91177308-0d34-0410-b5e6-96231b3b80d8
The v1i128 type is needed for the quadword add/substract instructions introduced
in POWER8. Futhermore, the PowerPC ABI specifies that parameters of type v1i128
are to be passed in a single vector register, while parameters of type i128 are
passed in pairs of GPRs. Thus, it is necessary to be able to differentiate
between v1i128 and i128 in LLVM.
http://reviews.llvm.org/D8564
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235198 91177308-0d34-0410-b5e6-96231b3b80d8
The i128 type is needed as a builtin type in order to support the v1i128 vector
type. The PowerPC ABI requires that the i128 and v1i128 types are handled
differently when passed as parameters to functions (i128 is passed in pairs of
GPRs, v1i128 is passed in a single vector register).
http://reviews.llvm.org/D8564
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235196 91177308-0d34-0410-b5e6-96231b3b80d8
This now emits simple, unoptimized xdata tables for __C_specific_handler
based on the handlers listed in @llvm.eh.actions calls produced by
WinEHPrepare.
This adds support for running __finally blocks when exceptions are
thrown, and removes the old landingpad fan-in codepath.
I ran some manual execution tests on small basic test cases with and
without optimization, as well as on Chrome base_unittests, which uses a
small amount of SEH. I'm sure there are bugs, and we may need to
revert.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235154 91177308-0d34-0410-b5e6-96231b3b80d8
See r230786 and r230794 for similar changes to gep and load
respectively.
Call is a bit different because it often doesn't have a single explicit
type - usually the type is deduced from the arguments, and just the
return type is explicit. In those cases there's no need to change the
IR.
When that's not the case, the IR usually contains the pointer type of
the first operand - but since typed pointers are going away, that
representation is insufficient so I'm just stripping the "pointerness"
of the explicit type away.
This does make the IR a bit weird - it /sort of/ reads like the type of
the first operand: "call void () %x(" but %x is actually of type "void
()*" and will eventually be just of type "ptr". But this seems not too
bad and I don't think it would benefit from repeating the type
("void (), void () * %x(" and then eventually "void (), ptr %x(") as has
been done with gep and load.
This also has a side benefit: since the explicit type is no longer a
pointer, there's no ambiguity between an explicit type and a function
that returns a function pointer. Previously this case needed an explicit
type (eg: a function returning a void() function was written as
"call void () () * @x(" rather than "call void () * @x(" because of the
ambiguity between a function returning a pointer to a void() function
and a function returning void).
No ambiguity means even function pointer return types can just be
written alone, without writing the whole function's type.
This leaves /only/ the varargs case where the explicit type is required.
Given the special type syntax in call instructions, the regex-fu used
for migration was a bit more involved in its own unique way (as every
one of these is) so here it is. Use it in conjunction with the apply.sh
script and associated find/xargs commands I've provided in rr230786 to
migrate your out of tree tests. Do let me know if any of this doesn't
cover your cases & we can iterate on a more general script/regexes to
help others with out of tree tests.
About 9 test cases couldn't be automatically migrated - half of those
were functions returning function pointers, where I just had to manually
delete the function argument types now that we didn't need an explicit
function type there. The other half were typedefs of function types used
in calls - just had to manually drop the * from those.
import fileinput
import sys
import re
pat = re.compile(r'((?:=|:|^|\s)call\s(?:[^@]*?))(\s*$|\s*(?:(?:\[\[[a-zA-Z0-9_]+\]\]|[@%](?:(")?[\\\?@a-zA-Z0-9_.]*?(?(3)"|)|{{.*}}))(?:\(|$)|undef|inttoptr|bitcast|null|asm).*$)')
addrspace_end = re.compile(r"addrspace\(\d+\)\s*\*$")
func_end = re.compile("(?:void.*|\)\s*)\*$")
def conv(match, line):
if not match or re.search(addrspace_end, match.group(1)) or not re.search(func_end, match.group(1)):
return line
return line[:match.start()] + match.group(1)[:match.group(1).rfind('*')].rstrip() + match.group(2) + line[match.end():]
for line in sys.stdin:
sys.stdout.write(conv(re.search(pat, line), line))
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235145 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
If a pointer is marked as dereferenceable_or_null(N), LLVM assumes it
is either `null` or `dereferenceable(N)` or both. This change only
introduces the attribute and adds a token test case for the `llvm-as`
/ `llvm-dis`. It does not hook up other parts of the optimizer to
actually exploit the attribute -- those changes will come later.
For pointers in address space 0, `dereferenceable(N)` is now exactly
equivalent to `dereferenceable_or_null(N)` && `nonnull`. For other
address spaces, `dereferenceable(N)` is potentially weaker than
`dereferenceable_or_null(N)` && `nonnull` (since we could have a null
`dereferenceable(N)` pointer).
The motivating case for this change is Java (and other managed
languages), where pointers are either `null` or dereferenceable up to
some usually known-at-compile-time constant offset.
Reviewers: rafael, hfinkel
Reviewed By: hfinkel
Subscribers: nicholas, llvm-commits
Differential Revision: http://reviews.llvm.org/D8650
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235132 91177308-0d34-0410-b5e6-96231b3b80d8
As a step toward killing `DIDescriptor` and its subclasses, remove it
from the `DIBuilder` API. Replace the subclasses with appropriate
pointers from the new debug info hierarchy. There are a couple of
possible surprises in type choices for out-of-tree frontends:
- Subroutine types: `MDSubroutineType`, not `MDCompositeTypeBase`.
- Composite types: `MDCompositeType`, not `MDCompositeTypeBase`.
- Scopes: `MDScope`, not `MDNode`.
- Generic debug info nodes: `DebugNode`, not `MDNode`.
This is part of PR23080.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235111 91177308-0d34-0410-b5e6-96231b3b80d8