Summary:
The loop which emits AssemblerPredicate conditions also links them together by emitting a '&&'.
If the 1st predicate is not an AssemblerPredicate, while the 2nd one is, nothing gets emitted for the 1st one, but we still emit the '&&' because of the 2nd predicate.
This generated code looks like "( && Cond2)" and is invalid.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D8294
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234312 91177308-0d34-0410-b5e6-96231b3b80d8
Fast isel used to zero extends immediates to 64 bits. This normally goes
unnoticed because the value is truncated to 32 bits for output.
Two cases were it is noticed:
* We fail to use smaller encodings.
* If the original constant was smaller than i32.
In the tests using i1 constants, codegen would change to use -1, which is fine
(and matches what regular isel does) since only the lowest bit is then used.
Instead, this patch then changes the ir to use i8 constants, which looks more
like what clang produces.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234249 91177308-0d34-0410-b5e6-96231b3b80d8
The uselist isn't enough to infer anything about the lifetime of such
allocas. If we want to re-add this optimization, we will need to
leverage lifetime markers to do it.
Fixes PR23122.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234196 91177308-0d34-0410-b5e6-96231b3b80d8
After recognising that a certain narrow instruction might need a relocation to
be represented, we used to unconditionally relax it to a Thumb2 instruction to
permit this. Unfortunately, some CPUs (e.g. v6m) don't even have most Thumb2
instructions, so we end up emitting a completely invalid instruction.
Theoretically, ELF does have relocations for these situations; but they are
fairly unusable with such short ranges and the ABI document even says they're
documented "for completeness". So an error is probably better there too.
rdar://20391953
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234195 91177308-0d34-0410-b5e6-96231b3b80d8
This patch allows SSE4.1 targets to use (V)PINSRB to create 16i8 vectors by inserting i8 scalars directly into a XMM register instead of merging pairs of i8 scalars into a i16 and using the SSE2 PINSRW instruction.
This allows folding of byte loads and reduces scalar register usage as well.
Differential Revision: http://reviews.llvm.org/D8839
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234193 91177308-0d34-0410-b5e6-96231b3b80d8
Add missing checks for `templateParams:` in `MDCompositeType`. Pull the
current check for `MDSubprogram` to reduce duplicated code and fix it up
to print a good message when the immediate operand isn't an `MDTuple`
(as a drive-by, make the same fix to `variables:` in `MDSubprogram`).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234177 91177308-0d34-0410-b5e6-96231b3b80d8
H.J. Lu noted that all .section options are separated by a comma.
This patch changes the syntax of unique to require one.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234174 91177308-0d34-0410-b5e6-96231b3b80d8
Before when deciding if we needed a relocation in A-B, we wore only checking
if A was weak.
This fixes the asymmetry.
The "InSet" argument should probably be renamed to "ForValue", since InSet is
very MachO specific, but doing so in this patch would make it hard to read.
This fixes PR22815.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234165 91177308-0d34-0410-b5e6-96231b3b80d8
This allows the compiler/assembly programmer to switch back to a
section. This in turn fixes the bootstrap failure on powerpc (tested
on gcc110) without changing the ppc codegen at all.
I will try to cleanup the various getELFSection overloads in a followup patch.
Just using a default argument now would lead to ambiguities.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234099 91177308-0d34-0410-b5e6-96231b3b80d8
Scalar integers are commuted to move constants to the RHS for re-association - this ensures vectors do the same.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234092 91177308-0d34-0410-b5e6-96231b3b80d8
Previously the patterns didn't have high enough priority and we would only use the GR32 form if the only the upper 32 or 56 bits were zero.
Fixes PR23100.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234075 91177308-0d34-0410-b5e6-96231b3b80d8
This add support for catching an exception such that an exception object
available to the catch handler will be initialized by the runtime.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234062 91177308-0d34-0410-b5e6-96231b3b80d8
We don't need to represent UnwindHelp in IR. Instead, we can use the
knowledge that we are emitting the parent function to decide if we
should create the UnwindHelp stack object.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234061 91177308-0d34-0410-b5e6-96231b3b80d8
InstCombine didn't realize that it needs to use DataLayout to determine
how wide pointers are. This lead to assertion failures.
This fixes PR23113.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234046 91177308-0d34-0410-b5e6-96231b3b80d8
Check that the `MDLocalVariable::getInlinedAt()` in a debug info
intrinsic's variable always matches the `MDLocation::getInlinedAt()` of
its `!dbg` attachment.
The goal here is to get rid of `MDLocalVariable::getInlinedAt()`
entirely (PR22778), since it's expensive and unnecessary, but I'll let
this verifier check bake for a while (a week maybe?) first. I've
updated the testcases that had the wrong value for `inlinedAt:`.
This checks that things are sane in the IR, but currently things go out
of whack in a few places in the backend. I'll follow shortly with
assertions in the backend (with code fixes).
If you have out-of-tree testcases that just started failing, here's how
I updated these ones:
1. The verifier check gives you the basic block, function, instruction,
and relevant metadata arguments (metadata numbering doesn't
necessarily match the source file, unfortunately).
2. Look at the `@llvm.dbg.*()` instruction, and compare the
`inlinedAt:` fields of the variable argument (second `metadata`
argument) and the `!dbg` attachment.
3. Figure out based on the variable `scope:` chain and the functions in
the file whether the variable has been inlined (and into what), so
you can determine which `inlinedAt:` is actually correct. In all of
the in-tree testcases, the `!MDLocation()` was correct and the
`!MDLocalVariable()` was wrong, but YMMV.
4. Duplicate the metadata that you're going to change, and add/drop the
`inlinedAt:` field from one of them. Be careful that the other
references to the same metadata node point at the correct one.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234021 91177308-0d34-0410-b5e6-96231b3b80d8
Grab the `MDLocalVariable` from the second-to-last argument; the last
argument is an `MDExpression`, and mixing them up will crash.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234019 91177308-0d34-0410-b5e6-96231b3b80d8
When enabling PPC64LE, I disabled some optimizations of BUILD_VECTOR
nodes for little endian because wrong results were produced. I've
subsequently investigated and found this is due to a call to
BuildVectorSDNode::isConstantSplat that was always specifying
big-endian. With this changed to correctly identify the target
endianness, the optimizations work as expected.
I found another case of a call to the same method with big-endian
hardcoded, in PPC::isAllNegativeZeroVector(). I discovered this was
an orphaned method with no callers, so I've just removed it.
The existing test/CodeGen/PowerPC/vec_constants.ll checks these
optimizations, so for testing I've just added a variant for little
endian.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234011 91177308-0d34-0410-b5e6-96231b3b80d8
This patch attempts to fold the shuffling of 'scalar source' inputs - BUILD_VECTOR and SCALAR_TO_VECTOR nodes - if the shuffle node is the only user. This folds away a lot of unnecessary shuffle nodes, and allows quite a bit of constant folding that was being missed.
Differential Revision: http://reviews.llvm.org/D8516
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234004 91177308-0d34-0410-b5e6-96231b3b80d8
Fixes PR19582.
Previously, when an asm assignment (.set or =) was created, we would look up
the section immediately in MCSymbol::setVariableValue. This caused symbols
to receive the wrong section if the RHS of the assignment had not been seen
yet. This had a knock-on effect in the object file emitters, causing them
to emit extra symbols, or to give symbols the wrong visibility or the wrong
section. For example, in the following asm:
.data
.Llocal:
.text
leaq .Llocal1(%rip), %rdi
.Llocal1 = .Llocal2
.Llocal2 = .Llocal
the first assignment would give .Llocal1 a null section, which would never get
fixed up by the second assignment. This would cause the ELF object file emitter
to consider .Llocal1 to be an undefined symbol and give it external linkage,
even though .Llocal1 should not have been emitted at all in the object file.
Or in the following asm:
alias_to_local = Ltmp0
Ltmp0:
the Mach-O object file emitter would give the alias_to_local symbol a n_type
of N_SECT and a n_sect of 0. This is invalid under the Mach-O specification,
which requires N_SECT symbols to receive a non-zero section number if the
symbol is defined in a section in the object file.
https://developer.apple.com/library/mac/documentation/DeveloperTools/Conceptual/MachORuntime/#//apple_ref/c/tag/nlist
After this change we do not look up the section when the assignment is created,
but instead look it up on demand and store it in Section, which is treated
as a cache if the symbol is a variable symbol.
This change also fixes a bug in MCExpr::FindAssociatedSection. Previously,
if we saw a subtraction, we would return the first referenced section, even in
cases where we should have been returning the absolute pseudo-section. Now we
always return the absolute pseudo-section for expressions that subtract two
section-derived expressions. This isn't always correct (e.g. if one of the
sections ends up being laid out at an absolute address), but it's probably
the best we can do without more context.
This allows us to remove code in two places where we appear to have been
working around this bug, in MachObjectWriter::markAbsoluteVariableSymbols
and in X86AsmPrinter::EmitStartOfAsmFile.
Re-applies r233595 (aka D8586), which was reverted in r233898.
Differential Revision: http://reviews.llvm.org/D8798
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233995 91177308-0d34-0410-b5e6-96231b3b80d8
Register coalescing can change the target of a RegPair hint to a
physreg, we should not crash on this. This also slightly improved the
way ARMBaseRegisterInfo::updateRegAllocHint() works.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233987 91177308-0d34-0410-b5e6-96231b3b80d8
This prevents us from running out of registers in the backend.
Introducing stack malloc calls prevents the backend from recognizing the
inline asm operands as stack objects. When the backend recognizes a
stack object, it doesn't need to materialize the address of the memory
in a physical register. Instead it generates a simple SP-based memory
operand. Introducing a stack malloc forces the backend to find a free
register for every memory operand. 32-bit x86 simply doesn't have enough
registers for this to succeed in most cases.
Reviewers: kcc, samsonov
Differential Revision: http://reviews.llvm.org/D8790
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233979 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The old requirement on GEP candidates being in bounds is unnecessary.
For off-bound GEPs, we still have
&B[i * S] = B + (i * S) * e = B + (i * e) * S
Test Plan: slsr_offbound_gep in slsr-gep.ll
Reviewers: meheff
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8809
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233949 91177308-0d34-0410-b5e6-96231b3b80d8
This makes it possible to use the same representation of llvm.eh.actions
in outlined handlers as we use in the parent function because i32's are
just constants that can be copied freely between functions.
I had to add a sentinel alloca to the list of child allocas so that we
don't try to sink the catch object into the handler. Normally, one would
use nullptr for this kind of thing, but TinyPtrVector doesn't support
null elements. More than that, it's elements have to have a suitable
alignment. Therefore, I settled on this for my sentinel:
AllocaInst *getCatchObjectSentinel() {
return static_cast<AllocaInst *>(nullptr) + 1;
}
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233947 91177308-0d34-0410-b5e6-96231b3b80d8
Without this patch, we split the 256-bit vector into halves and produced something like:
movzwl (%rdi), %eax
vmovd %eax, %xmm0
vxorps %xmm1, %xmm1, %xmm1
vblendps $15, %ymm0, %ymm1, %ymm0 ## ymm0 = ymm0[0,1,2,3],ymm1[4,5,6,7]
Now, we eliminate the xor and blend because those zeros are free with the vmovd:
movzwl (%rdi), %eax
vmovd %eax, %xmm0
This should be the final fix needed to resolve PR22685:
https://llvm.org/bugs/show_bug.cgi?id=22685
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233941 91177308-0d34-0410-b5e6-96231b3b80d8
For code like this:
define <8 x i32> @load_v8i32() {
ret <8 x i32> <i32 7, i32 0, i32 0, i32 0, i32 0, i32 0, i32 0, i32 0>
}
We produce this AVX code:
_load_v8i32: ## @load_v8i32
movl $7, %eax
vmovd %eax, %xmm0
vxorps %ymm1, %ymm1, %ymm1
vblendps $1, %ymm0, %ymm1, %ymm0 ## ymm0 = ymm0[0],ymm1[1,2,3,4,5,6,7]
retq
There are at least 2 bugs in play here:
We're generating a blend when a move scalar does the same job using 2 less instruction bytes (see FIXMEs).
We're not matching an existing pattern that would eliminate the xor and blend entirely. The zero bytes are free with vmovd.
The 2nd fix involves an adjustment of "AddedComplexity" [1] and mostly masks the 1st problem.
[1] AddedComplexity has close to no documentation in the source.
The best we have is this comment: "roughly corresponds to the number of nodes that are covered".
It appears that x86 has bastardized this definition by inflating its values for some other
undocumented reason. For example, we have a pattern with "AddedComplexity = 400" (!).
I searched my way to this page:
https://groups.google.com/forum/#!topic/llvm-dev/5UX-Og9M0xQ
Differential Revision: http://reviews.llvm.org/D8794
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233931 91177308-0d34-0410-b5e6-96231b3b80d8
I'm playing with supporting custom stack map formats with statepoints. While
doing so, I noticed that the existing implementation didn't indicate inherently
unsized frames. This change essentially just ports the functionality that already
exists for the default StackMaps section to custom stackmaps.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233891 91177308-0d34-0410-b5e6-96231b3b80d8
use these to add support for C++ static ctors/dtors to the Orc-lazy JIT in LLI.
Replace the trivial_retval_1 regression test - the new 'hello' test is covering
strictly more code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233885 91177308-0d34-0410-b5e6-96231b3b80d8
print the Objective-C runtime meta data for Mach-O files.
There are three types of Objective-C runtime meta data, Objc2 64-bit,
Objc2 32-bit and Objc1 32-bit. This prints the first of these types. The
changes to print the others will follow next.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233840 91177308-0d34-0410-b5e6-96231b3b80d8
addl has higher throughput and this was needlessly picking a suboptimal
encoding causing PR23098.
I wish there was a way of doing this without further duplicating tbl-
generated patterns, but so far I haven't found one.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233832 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change teaches ScalarEvolution::isLoopBackedgeGuardedByCond to look
at edges within the loop body that dominate the latch. We don't do an
exhaustive search for all possible edges, but only a quick walk up the
dom tree.
This re-lands r233447. r233447 was reverted because it caused massive
compile-time regressions. This change has a fix for the same issue.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233829 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is part 1 of fixes to address the problems described in
https://llvm.org/bugs/show_bug.cgi?id=22719.
The restriction to limit loop scales to 4,096 does not really prevent
overflows anymore, as the underlying algorithm has changed and does
not seem to suffer from this problem.
Additionally, artificially restricting loop scales to such a low number
skews frequency information, making loops of equal hotness appear to
have very different hotness properties.
The only loops that are artificially restricted to a scale of 4096 are
infinite loops (those loops with an exit mass of 0). This prevents
infinite loops from skewing the frequencies of other regions in the CFG.
At the end of propagation, frequencies are scaled to values that take no
more than 64 bits to represent. When the range of frequencies to be
represented fits within 61 bits, it pushes up the scaling factor to a
minimum of 8 to better distinguish small frequency values. Otherwise,
small frequency values are all saturated down at 1.
Tested on x86_64.
Reviewers: dexonsmith
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8718
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233826 91177308-0d34-0410-b5e6-96231b3b80d8
v8.1a is renamed to architecture, following current entity naming approach.
Excess generic cpu is removed. Intended use: "generic" cpu with "v8.1a" subtarget feature
Reviewers: jmolloy
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8767
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233811 91177308-0d34-0410-b5e6-96231b3b80d8
We used to do this before refactorings around r225640.
Some clang users checked for _chk libcall availability using:
__has_builtin(__builtin___memcpy_chk)
When compiling with -fno-builtin, this is always true.
When passing -ffreestanding/-mkernel, which both imply -fno-builtin, we
end up with fortified libcalls, which isn't acceptable in a freestanding
environment which only provides their non-fortified counterparts.
Until we change clang and/or teach external users to check for availability
differently, disregard the "nobuiltin" attribute and TLI::has.
Workaround for PR23093.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233776 91177308-0d34-0410-b5e6-96231b3b80d8
Under normal circumstances, use of CR bits is disabled when running at -O0, but
it is enabled by default otherwise, and if you have optnone functions, they'll
still generally be generated with crbits turned on (because nothing else turns
them off). FastISel can't handle most things dealing with i1 values when using
CR bits, and checks for that, but was not checking the return type on
functions; we can't fast-isel function calls with i1 return values either when
using CR bits for boolean values.
Fixes PR22664.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233775 91177308-0d34-0410-b5e6-96231b3b80d8
This lets us catch exceptions in simple cases.
N.B. Things that do not work include (but are not limited to):
- Throwing from within a catch handler.
- Catching an object with a named catch parameter.
- 'CatchHigh' is fictitious, we aren't sure of its purpose.
- We aren't entirely efficient with regards to the number of EH states
that we generate.
- IP-to-State tables are sensitive to the order of emission.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233767 91177308-0d34-0410-b5e6-96231b3b80d8
Even at -O0, we fall back to SDAG when we hit intrinsics, and if the intrinsic
is a memset/memcpy/etc. we might normally use vector types. At -O0, this is
probably not a good idea (because, if there is a bug in the lowering code,
there would be no good way to turn it off). At -O0, only use scalar preferred
types.
Related to PR22754.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233755 91177308-0d34-0410-b5e6-96231b3b80d8
extended loads.
Implement the related target lowering hook so that the optimization has a better
estimation of the cost of an extension.
rdar://problem/19267165
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233753 91177308-0d34-0410-b5e6-96231b3b80d8
The existing code in getMemsetValue only handled integer-preferred types when
the fill value was not a constant. Make this more robust in two ways:
1. If the preferred type is a floating-point value, do the mul-splat trick on
the corresponding integer type and then bitcast.
2. If the preferred type is a vector, do the mul-splat trick on one vector
element, and then build a vector out of them.
Fixes PR22754 (although, we should also turn off use of vector types at -O0).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233749 91177308-0d34-0410-b5e6-96231b3b80d8
These regression tests are supposed to test small code model support, but have
been XFAIL'd because we don't have an in-tree memory manager that can guarantee
a small-code-model compatible memory layout. Unfortunately, they can
occasionally pass if they get lucky with memory allocation, causing unexpected
passes on the bots. That's not very helpful.
I'm going to remove these until we have the infrastructure (small-code-model
compatible memory manager) to run them properly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233722 91177308-0d34-0410-b5e6-96231b3b80d8
I suggested this change in D7898 (http://llvm.org/viewvc/llvm-project?view=revision&revision=231354)
It improves the v4i64 case although not optimally. This AVX codegen:
vmovq {{.*#+}} xmm0 = mem[0],zero
vxorpd %ymm1, %ymm1, %ymm1
vblendpd {{.*#+}} ymm0 = ymm0[0],ymm1[1,2,3]
Becomes:
vmovsd {{.*#+}} xmm0 = mem[0],zero
Unfortunately, this doesn't completely solve PR22685. There are still at least 2 problems under here:
We're not handling v32i8 / v16i16.
We're not getting the FP / int domains right for instruction selection.
But since this patch alone appears to do no harm, reduces code duplication, and helps v4i64,
I'm submitting this patch ahead of fixing the above.
Differential Revision: http://reviews.llvm.org/D8341
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233704 91177308-0d34-0410-b5e6-96231b3b80d8
So far, we do not yet support any instruction specific to zEC12.
Most of the facilities added with zEC12 are indeed not very useful
to compiler code generation, but there is one exception: the
miscellaneous-extensions facility provides the RISBGN instruction,
which is a variant of RISBG that does not set the condition code.
Add support for this facility, MC support for RISBGN, and CodeGen
support for prefering RISBGN over RISBG on zEC12, unless we can
actually make use of the condition code set by RISBG.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233690 91177308-0d34-0410-b5e6-96231b3b80d8
We already exploit a number of instructions specific to z196,
but not yet POPCNT. Add support for the population-count
facility, MC support for the POPCNT instruction, CodeGen
support for using POPCNT, and implement the getPopcntSupport
TargetTransformInfo hook.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233689 91177308-0d34-0410-b5e6-96231b3b80d8
This hooks up the TargetTransformInfo machinery for SystemZ,
and provides an implementation of getIntImmCost.
In addition, the patch adds the isLegalICmpImmediate and
isLegalAddImmediate TargetLowering overrides, and updates
a couple of test cases where we now generate slightly
better code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233688 91177308-0d34-0410-b5e6-96231b3b80d8
it more liberally.
SplitVecOp_TRUNCATE has logic for recursively splitting oversize vectors
that need more than one round of splitting to become legal. There are many
other ISD nodes that could benefit from this logic, so factor it out and
use it for FP_TO_UINT,FP_TO_SINT,SINT_TO_FP,UINT_TO_FP and FTRUNC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233681 91177308-0d34-0410-b5e6-96231b3b80d8
We used to miss non-Q YMM integer vectors, and, non-Q/D XMM integer
vectors.
While there, change the v4i32 patterns to prefer MOVNTDQ.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233668 91177308-0d34-0410-b5e6-96231b3b80d8
Unify the error messages for the various tools when `verifyModule()`
fails on an input module. The "brave new way" is:
lltool: path/to/input.ll: error: input module is broken!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233667 91177308-0d34-0410-b5e6-96231b3b80d8
Most of these checks were already in the `Verifier` so this is more of a
cleanup. Now almost everything is over there.
Now that require a `name:` for `MDGlobalVariable`, add a check in
`LLParser` for it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233657 91177308-0d34-0410-b5e6-96231b3b80d8
Move over some more checks from `DIDescriptor::Verify()`, and change
`LLParser` to require non-null `file:` fields in compile units.
I've ignored the comment in test/Assembler/metadata-null-operands.ll
since I disagree with it. At the time that test was written (r229960),
the debug info verifier wasn't on by default, so my comment there is in
the context of not expecting the verifier to be useful. It is now, and
besides that, since r233394 we can check when parsing textual IR whether
an operand is null that shouldn't be.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233654 91177308-0d34-0410-b5e6-96231b3b80d8
We used to match the register variant before the immediate when the register
argument could be implicitly zero-extended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233653 91177308-0d34-0410-b5e6-96231b3b80d8
Generate tables in the .xdata section representing what actions to take
when an exception is thrown. This currently fills in state for
cleanups, catch handlers are still unfinished.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233636 91177308-0d34-0410-b5e6-96231b3b80d8
When we expand the RET_ReallyLR pseudo instruction we also need to transfer the
implicit operands.
The return register is an implicit operand and without it the liveness
calculation generates an incorrect live-out set for the patchpoint.
This fixes rdar://problem/19068476.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233635 91177308-0d34-0410-b5e6-96231b3b80d8
BPF has cpu_to_be and cpu_to_le instructions.
For now assume little endian and generate cpu_to_be for ISD::BSWAP.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233620 91177308-0d34-0410-b5e6-96231b3b80d8
Adds a test to verify the behavior that r233153 restored: 'optnone'
does not spuriously disable the DAG combiner, and in fact there are
cases where the DAG combiner must run (even at -O0 or 'optnone') in
order for codegen to succeed.
Differential Revision: http://reviews.llvm.org/D8614
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233584 91177308-0d34-0410-b5e6-96231b3b80d8
When a new SM architecture is introduced, it is only supported by the
current PTX version and later. Make sure we are using at least the
minimum PTX version for the target architecture.
This also removes support for PTX ISA < 3.2.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233583 91177308-0d34-0410-b5e6-96231b3b80d8
Add operand checks for `MDLexicalBlock` and `MDLexicalBlockFile`. Like
`MDLocalVariable` and `MDLocation`, these nodes always require a scope.
There was no test bitrot to fix here (just updated the serialization
tests in test/Assembler/mdlexicalblock.ll).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233561 91177308-0d34-0410-b5e6-96231b3b80d8
Momentarily (but never in tree), the `scope:` field was called
`parent:`. Apparently a few testcases were left behind with "parent" in
the name, so rename them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233560 91177308-0d34-0410-b5e6-96231b3b80d8
Compiling the following function with -O0 would crash, since LLVM would
hit an assertion in getTestUnderMaskCond:
int test(unsigned long x)
{
return x >= 0 && x <= 15;
}
Fixed by detecting the case in the caller of getTestUnderMaskCond.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233541 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The 'R' constraint is actually supposed to be much more complicated than
this and is defined in terms of whether it will cause macro expansion in
the assembler. 'R' is getting less useful due to architecture changes and
ought to be replaced by other constraints. We therefore implement 9-bit
offsets which will work for all subtargets and all instructions.
Reviewers: vkalintiris
Reviewed By: vkalintiris
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8440
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233537 91177308-0d34-0410-b5e6-96231b3b80d8
They're harmless and it's easy to generate them from clang, leading to
a crash in LLVM. Found by afl-fuzz.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233500 91177308-0d34-0410-b5e6-96231b3b80d8
The asm syntax for the 32-bit rotate-and-mask instructions can take a 32-bit
bitmask instead of an (mb, me) pair. This syntax is not specified in the Power
ISA manual, but is accepted by GNU as, and is documented in IBM's Assembler
Language Reference. The GNU Multiple Precision Arithmetic Library (gmp)
contains assembly that uses this syntax.
To implement this, I moved the isRunOfOnes utility function from
PPCISelDAGToDAG.cpp to PPCMCTargetDesc.h.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233483 91177308-0d34-0410-b5e6-96231b3b80d8
PPC_FP128 is really the sum of two consecutive doubles, where the first double
is always stored first in memory, regardless of the target endianness. The
memory layout of i128, however, depends on the target endianness, and so we
can't fold this without target endianness information. As a result, we must not
do this folding in lib/IR/ConstantFold.cpp (it could be done instead in
Analysis/ConstantFolding.cpp, but that's not done now).
Fixes PR23026.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233481 91177308-0d34-0410-b5e6-96231b3b80d8
Loosen one check from r233446: as long as `DIBuilder` requires a
non-null type for every subprogram, we should allow a null type array.
Also add tests for the rest of `MDSubroutineType`, which were somehow
missing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233468 91177308-0d34-0410-b5e6-96231b3b80d8
Fix testcases that don't pass the verifier after a WIP patch to check
`MDSubprogram` operands more effectively. I found the following issues:
- When `isDefinition: false`, the `variables:` field might point at
`!{i32 786468}`, or at a tuple that pointed at an empty tuple with
the comment "previously: invalid DW_TAG_base_type" (I vaguely recall
adding those comments during an upgrade script). In these cases, I
just dropped the array.
- The `variables:` field might point at something like `!{!{!8}}`,
where `!8` was an `MDLocation`. I removed the extra layer of
indirection.
- Invalid `type:` (not an `MDSubroutineType`).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233466 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change teaches ScalarEvolution::isLoopBackedgeGuardedByCond to look
at edges within the loop body that dominate the latch. We don't do an
exhaustive search for all possible edges, but only a quick walk up the
dom tree.
Reviewers: atrick, hfinkel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8627
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233447 91177308-0d34-0410-b5e6-96231b3b80d8
Change `llc` and `opt` to run `verifyModule()`. This ensures that we
check the full module before `FunctionPass::doInitialization()` ever
gets called (I was getting crashes in `DwarfDebug` instead of verifier
failures when testing a WIP patch that checks operands of compile
units). In `opt`, also move up debug-info-stripping so that it still
runs before verification.
There was a fair bit of broken code that was sitting in tree.
Interestingly, some were cases of a `select` that referred to itself in
`-instcombine` tests (apparently an intermediate result). I split them
off to `*-noverify.ll` tests with RUN lines like this:
opt < %s -S -disable-verify -instcombine | opt -S | FileCheck %s
This avoids verifying the input file (so we can get the broken code into
`-instcombine), but still verifies the output with a second call to
`opt` (to verify that `-instcombine` will clean it up like it should).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233432 91177308-0d34-0410-b5e6-96231b3b80d8
Fix debug info in these tests, which started failing with a WIP patch to
verify compile units and types. The problems look like they were all
caused by bitrot. They fell into these categories:
- Using `!{i32 0}` instead of `!{}`.
- Using `!{null}` instead of `!{}`.
- Using `!MDExpression()` instead of `!{}`.
- Using `!8` instead of `!{!8}`.
- `file:` references that pointed at `MDCompileUnit`s instead of the
same `MDFile` as the compile unit.
- `file:` references that were numerically off-by-one or (off-by-ten).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233415 91177308-0d34-0410-b5e6-96231b3b80d8
Tailcalls are only OK with forwarded sret pointers. With explicit sret,
one approximation is to check that the pointer isn't an Instruction, as
in that case it might point into some local memory (alloca). That's not
OK with tailcalls.
Explicit sret counterpart to r233409.
Differential Revison: http://reviews.llvm.org/D8510
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233410 91177308-0d34-0410-b5e6-96231b3b80d8
Expose bpf pseudo load instruction via intrinsic. It is used by front-ends that
can encode file descriptors directly into IR instead of relying on relocations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233396 91177308-0d34-0410-b5e6-96231b3b80d8
nodes.
When a node is terminal it is pushed at the end of the list of the copies to
coalesce instead of being completely ignored. In effect, this reduces its
priority over non-terminal nodes.
Because of that, we do not miss the rematerialization opportunities, nor the
copies that can be merged with more complex, than the terminal rule,
interference checks.
Related to PR22768.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233395 91177308-0d34-0410-b5e6-96231b3b80d8
Change `LLParser` to require a non-null `scope:` field for both
`MDLocation` and `MDLocalVariable`. There's no need to wait for the
verifier for this check. This also allows their `::getImpl()` methods
to assert that the incoming scope is non-null.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233394 91177308-0d34-0410-b5e6-96231b3b80d8
Check fields from `MDLocalVariable` and `MDGlobalVariable` and change
the accessors to downcast to the right types. `getType()` still returns
`Metadata*` since it could be an `MDString`-based reference.
Since local variables require non-null scopes, I also updated `LLParser`
to require a `scope:` field.
A number of testcases had grown bitrot and started failing with this
patch; I committed them separately in r233349. If I just broke your
out-of-tree testcases, you're probably hitting similar problems (so have
a look there).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233389 91177308-0d34-0410-b5e6-96231b3b80d8
Dropping old debug format requires the entire module to be read upfront.
This was failing only with the gold plugin, but that is just because
llvm-link was not upgrading metadata.
The new testcase using llvm-link shows the problem.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233381 91177308-0d34-0410-b5e6-96231b3b80d8
This re-adds float2int to the tree, after fixing PR23038. It turns
out the argument to APSInt() is true-if-unsigned, rather than
true-if-signed :(. Added testcase and explanatory comment.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233370 91177308-0d34-0410-b5e6-96231b3b80d8
"Fix the MachineScheduler's logic for updating ready times for in-order.
Now the scheduler updates a node's ready time as soon as it is
scheduled, before releasing dependent nodes."
This fix was only made in one variant of the ScheduleDAGMI driver.
Francois de Ferriere reported the issue in the other bit of code where
it was also needed.
I never got around to coming up with a test case, but it's an
obvious fix that shouldn't be delayed any longer.
I'll try to refactor this code a little better.
I did verify performance on a wide variety of targets and saw no
negative impact with this fix.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233366 91177308-0d34-0410-b5e6-96231b3b80d8
This was discussed a while back and I left it optional for migration. Since it's been far more than the 'week or two' that was discussed, time to actually make this manditory.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233357 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds support for explicitly provided spill slots in the GC arguments of a gc.statepoint. This is somewhat analogous to gcroot, but leverages the STATEPOINT MI node and StackMap infrastructure. The motivation for this is:
1) The stack spilling code for gc.statepoints hasn't advanced as fast as I'd like. One major option is to give up on doing spilling in the backend and do it at the IR level instead. We'd give up the ability to have gc values in registers, but that's a minor cost in practice. We are not neccessarily moving in that direction, but having the ability to prototype such a thing cheaply is interesting.
2) I want to port the gcroot lowering to use the statepoint infastructure. Given the metadata printers for gcroot expect a fixed set of stack roots, it's easiest to just reuse the explicit stack slots and pass them directly to the underlying statepoint.
I'm holding off on the documentation for the new feature until I'm reasonable sure this is going to stick around.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233356 91177308-0d34-0410-b5e6-96231b3b80d8
This test returns nonnative integer types which aren't supported on all targets.
The real issue with the SelectionDAG scheduler is with x86 EFLAGS.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233355 91177308-0d34-0410-b5e6-96231b3b80d8
We don't have any logic to emit those tables yet, so the SDAG lowering
of this intrinsic is just a stub. We can see the intrinsic in the
prepared IR, though.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233354 91177308-0d34-0410-b5e6-96231b3b80d8
It can happen (by line CurSU->isPending = true; // This SU is not in
AvailableQueue right now.) that a SUnit is mark as available but is
not in the AvailableQueue. For SUnit being selected for scheduling
both conditions must be met.
This patch mainly defensively protects from invalid removing a node
from a queue. Sometimes nodes are marked isAvailable but are not in
the queue because they have been defered due to some hazard.
Patch by Pawel Bylica!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233351 91177308-0d34-0410-b5e6-96231b3b80d8
Fix testcases whose variables are invalid. I'm working on a patch that
adds `Verifier` checks for `MDLocalVariable` (and `MDGlobalVariable`),
and these failed because:
- `scope:` fields need to point at `MDLocalScope` and can't be null.
- `file:` fields need to point at `MDFile`.
- `inlinedAt:` fields need to point at `MDLocation`.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233349 91177308-0d34-0410-b5e6-96231b3b80d8
We used to dyn_cast<Constant> in the recursive call, but cast<> in the
initial one, and there can be non-Constant initial users.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233346 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The ARM backend can use a loop to implement copying byval parameters before
a call. In non-thumb2 mode it uses a constant pool load to materialize the
trip count. For targets that need movt instead (e.g. Native Client), use
the same code as in thumb2 mode to materialize the trip count.
Reviewers: jfb, t.p.northover
Differential Revision: http://reviews.llvm.org/D8442
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233324 91177308-0d34-0410-b5e6-96231b3b80d8
Check accessors of `MDLocation`, and change them to `cast<>` down to the
right types. Also add type-safe factory functions.
All the callers that handle broken code need to use the new versions of
the accessors (`getRawScope()` instead of `getScope()`) that still
return `Metadata*`. This is also necessary for things like
`MDNodeKeyImpl<MDLocation>` (in LLVMContextImpl.h) that need to unique
the nodes when their operands might still be forward references of the
wrong type.
In the `Value` hierarchy, consumers that handle broken code use
`getOperand()` directly. However, debug info nodes have a ton of
operands, and their order (even their existence) isn't stable yet. It's
safer and more maintainable to add an explicit "raw" accessor on the
class itself.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233322 91177308-0d34-0410-b5e6-96231b3b80d8
There is something in link.exe that requires a relocation to use a
global symbol. Not doing so breaks the chrome build on windows.
This patch sets isWeak for that to work. To compensate,
we then need to look past those symbols when not creating relocations.
This patch includes an ELF test that matches GNU as behaviour.
I am still reducing the chrome build issue and will add a test
once that is done.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233318 91177308-0d34-0410-b5e6-96231b3b80d8
The "|&" operator isn't POSIX, so it can fail depending on the host's
default shell. Avoid it.
There were also a couple of places that did "2>1", but this creates a
file called "1". They clearly meant "2>&1".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233309 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r233254, effectively reapplying r233164 (and its
successors), with an additional testcase for when subprograms match
exactly. This fixes PR22792 (again).
I'm using the same approach, but I've moved up the call to
`stripReplacedSubprograms()`. The function pointers need to be dropped
before mapping any metadata from the source module, or else this can
drop the function from new subprograms that have merged (via Metadata
uniquing) with the old ones. Dropping the pointers first prevents them
from merging.
**** The original commit message follows. ****
Linker: Drop function pointers for overridden subprograms
Instead of dropping subprograms that have been overridden, just set
their function pointers to `nullptr`. This is a minor adjustment to the
stop-gap fix for PR21910 committed in r224487, and fixes the crasher
from PR22792.
The problem that r224487 put a band-aid on: how do we find the canonical
subprogram for a `Function`? Since the backend currently relies on
`DebugInfoFinder` (which does a naive in-order traversal of compile
units and picks the first subprogram) for this, r224487 tried dropping
non-canonical subprograms.
Dropping subprograms fails because the backend *also* builds up a map
from subprogram to compile unit (`DwarfDebug::SPMap`) based on the
subprogram lists. A missing subprogram causes segfaults later when an
inlined reference (such as in this testcase) is created.
Instead, just drop the `Function` pointer to `nullptr`, which nicely
mirrors what happens when an already-inlined `Function` is optimized
out. We can't really be sure that it's the same definition anyway, as
the testcase demonstrates.
This still isn't completely satisfactory. Two flaws at least that I can
think of:
- I still haven't found a straightforward way to make this symmetric
in the IR. (Interestingly, the DWARF output is already symmetric,
and I've tested for that to be sure we don't regress.)
- Using `DebugInfoFinder` to find the canonical subprogram for a
function is kind of crazy. We should just attach metadata to the
function, like this:
define weak i32 @foo(i32, i32) !dbg !MDSubprogram(...) {
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233302 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
With the introduction of MarkPendingLoopPredicates in r157092, I don't
think the bailout is needed anymore.
Reviewers: atrick, nicholas
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8624
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233296 91177308-0d34-0410-b5e6-96231b3b80d8
Anding and comparing with zero can be done in a single instruction on
most archs so this is a bit cheaper.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233291 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch enhances SLSR to handle another candidate form &B[i * S]. If
we found two candidates
S1: X = &B[i * S]
S2: Y = &B[i' * S]
and S1 dominates S2, we can replace S2 with
Y = &X[(i' - i) * S]
Test Plan:
slsr-gep.ll
X86/no-slsr.ll: verify that we do not run SLSR on GEPs that already fit into
an addressing mode
Reviewers: eliben, atrick, meheff, hfinkel
Reviewed By: hfinkel
Subscribers: sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D7459
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233286 91177308-0d34-0410-b5e6-96231b3b80d8
those are in the same basic block.
The previous approach was the topological order of the basic block.
By default this rule is disabled.
Related to PR22768.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233241 91177308-0d34-0410-b5e6-96231b3b80d8
Otherwise, broken input modules can cause assertions. I've updated two
of the testcases that started failing (modules that had `Require` flags
but didn't meet their own requirements), but Rafael and I decided that
test/Linker/2011-08-22-ResolveAlias.ll should just be deleted outright
-- it's a leftover of the way llvm-gcc used to implement weakref.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233229 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
`ComputeNumSignBits` returns incorrect results for `srem` instructions.
This change fixes the issue and adds a test case.
Reviewers: nadav, nicholas, atrick
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8600
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233225 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds supports for the vector constant folding of TRUNCATE and FP_EXTEND instructions and tidies up the SINT_TO_FP and UINT_TO_FP instructions to match.
It also moves the vector constant folding for the FNEG and FABS instructions to use the DAG.getNode() functionality like the other unary instructions.
Differential Revision: http://reviews.llvm.org/D8593
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233224 91177308-0d34-0410-b5e6-96231b3b80d8
As dblaikie pointed out, if I stop setting `emissionKind: 2` then the
backend won't do magical things on Linux vs. Darwin. I had wrongly
assumed that there were stricter requirements on the input if we weren't
in line-tables-only mode, but apparently not.
With that knowledge, clean up this testcase a little more.
- Set `emissionKind: 1`.
- Add back checks for the weak version of @foo.
- Check more robustly that we have the right subprograms by checking
the `DW_AT_decl_file` and `DW_AT_decl_line` which now show up.
- Check the line table in isolation (since it's no longer doubling as
an indirect test for the subprogram of the weak version of @foo).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233221 91177308-0d34-0410-b5e6-96231b3b80d8
According to at least one bot [1], function prologues aren't always
empty for these functions. Skip that part of the follow-up check.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233214 91177308-0d34-0410-b5e6-96231b3b80d8
We don't have any logic to emit those tables yet, so the sdag lowering
of this intrinsic is just a stub. We can see the intrinsic in the
prepared IR, though.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233209 91177308-0d34-0410-b5e6-96231b3b80d8
Rewrite the checks from r233164 that I temporarily disabled in r233165.
It turns out that the line-tables only debug info we emit from `llc` is
(intentionally) different on Linux than on Darwin. r218129 started
skipping emission of subprograms with no inlined subroutines, and
r218702 was a spiritual revert of that behaviour for Darwin.
I think we can still test this in a platform-neutral way.
- Stop checking for the possibly missing `DW_TAG_subprogram` defining
the debug info for the real version of `@foo`.
- Start checking the line tables, ensuring that the right debug info
was used to generate them (grabbing `DW_AT_low_pc` from the compile
unit).
- I changed up the line numbers used in the "weak" version so it's
easier to follow.
This should hopefully finish off PR22792.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233207 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds Hardware Transaction Memory (HTM) support supported by ISA 2.07
(POWER8). The intrinsic support is based on GCC one [1], but currently only the
'PowerPC HTM Low Level Built-in Function' are implemented.
The HTM instructions follows the RC ones and the transaction initiation result
is set on RC0 (with exception of tcheck). Currently approach is to create a
register copy from CR0 to GPR and comapring. Although this is suboptimal, since
the branch could be taken directly by comparing the CR0 value, it generates code
correctly on both test and branch and just return value. A possible future
optimization could be elimitate the MFCR instruction to branch directly.
The HTM usage requires a recently newer kernel with PPC HTM enabled. Tested on
powerpc64 and powerpc64le.
This is send along a clang patch to enabled the builtins and option switch.
[1] https://gcc.gnu.org/onlinedocs/gcc/PowerPC-Hardware-Transactional-Memory-Built-in-Functions.html
Phabricator Review: http://reviews.llvm.org/D8247
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233204 91177308-0d34-0410-b5e6-96231b3b80d8
Some languages, such as Go, have pre-defined structure types (e.g. "string"
is essentially a pointer/length pair) or pre-defined "typedef" types
(e.g. "error" is essentially a typedef for a specific interface type).
Such types do not have associated source location, so a Go frontend would
be correct not to associate a file name with such types.
This change relaxes the DIType verifier to permit unlocated types with
these tags.
Differential Revision: http://reviews.llvm.org/D8588
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233200 91177308-0d34-0410-b5e6-96231b3b80d8
This patch allows AVX blend instructions to handle insertion into the low
element of a 256-bit vector for the appropriate data types.
For f32, instead of:
vblendps $1, %xmm1, %xmm0, %xmm1 ## xmm1 = xmm1[0],xmm0[1,2,3]
vblendps $15, %ymm1, %ymm0, %ymm0 ## ymm0 = ymm1[0,1,2,3],ymm0[4,5,6,7]
we get:
vblendps $1, %ymm1, %ymm0, %ymm0 ## ymm0 = ymm1[0],ymm0[1,2,3,4,5,6,7]
For f64, instead of:
vmovsd %xmm1, %xmm0, %xmm1 ## xmm1 = xmm1[0],xmm0[1]
vblendpd $3, %ymm1, %ymm0, %ymm0 ## ymm0 = ymm1[0,1],ymm0[2,3]
we get:
vblendpd $1, %ymm1, %ymm0, %ymm0 ## ymm0 = ymm1[0],ymm0[1,2,3]
For the hardware-neglected integer data types, I left a TODO comment in the
code and added regression tests for a follow-on patch.
Differential Revision: http://reviews.llvm.org/D8609
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233199 91177308-0d34-0410-b5e6-96231b3b80d8
1. There were no CHECK-LABELs, so we could match instructions from the wrong function.
2. The use of zero operands meant multiple xor instructions could match some CHECKs.
3. The test was over-specified to need a Sandybridge CPU and Darwin triple.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233198 91177308-0d34-0410-b5e6-96231b3b80d8
The previous logic was to first try without relocations at all
and failing that stop on the first defined symbol.
That was inefficient and incorrect in the case part of the
expression could be simplified and another part could not
(see included test).
We now stop the evaluation when we get to a variable whose value
can change (i.e. is weak).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233187 91177308-0d34-0410-b5e6-96231b3b80d8
Added test Float2Int/float2int-optnone.ll to verify that pass Float2Int
is not run on optnone functions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233183 91177308-0d34-0410-b5e6-96231b3b80d8
This ensures that we're building and testing the CompileOnDemand layer, at least
in a basic way.
Currently x86-64 only, and with limited to no library calls enabled (depending
on host platform). Patches welcome. ;)
To enable access to the lazy JIT, this patch replaces the '-use-orcmcjit' lli
option with a new option:
'-jit-kind={ mcjit | orc-mcjit | orc-lazy }'.
All regression tests are updated to use the new option, and one trivial test of
the new lazy JIT is added.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233182 91177308-0d34-0410-b5e6-96231b3b80d8
In r233009 we gained specific check-llvm-* build targets for invoking
specific parts of the test suite, but they were copying the
dependencies for check-all, rather than just listing the dependencies
for check-llvm.
This moves the creation of these targets next to the check-llvm
target, and uses that target's configuration rather than the check-all
config.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233174 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of dropping subprograms that have been overridden, just set
their function pointers to `nullptr`. This is a minor adjustment to the
stop-gap fix for PR21910 committed in r224487, and fixes the crasher
from PR22792.
The problem that r224487 put a band-aid on: how do we find the canonical
subprogram for a `Function`? Since the backend currently relies on
`DebugInfoFinder` (which does a naive in-order traversal of compile
units and picks the first subprogram) for this, r224487 tried dropping
non-canonical subprograms.
Dropping subprograms fails because the backend *also* builds up a map
from subprogram to compile unit (`DwarfDebug::SPMap`) based on the
subprogram lists. A missing subprogram causes segfaults later when an
inlined reference (such as in this testcase) is created.
Instead, just drop the `Function` pointer to `nullptr`, which nicely
mirrors what happens when an already-inlined `Function` is optimized
out. We can't really be sure that it's the same definition anyway, as
the testcase demonstrates.
This still isn't completely satisfactory. Two flaws at least that I can
think of:
- I still haven't found a straightforward way to make this symmetric
in the IR. (Interestingly, the DWARF output is already symmetric,
and I've tested for that to be sure we don't regress.)
- Using `DebugInfoFinder` to find the canonical subprogram for a
function is kind of crazy. We should just attach metadata to the
function, like this:
define weak i32 @foo(i32, i32) !dbg !MDSubprogram(...) {
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233164 91177308-0d34-0410-b5e6-96231b3b80d8
Reverts the code change from r221168 and the relevant test.
It was a mistake to disable the combiner, and based on the ultimate
definition of 'optnone' we shouldn't have considered the test case
as failing in the first place.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233153 91177308-0d34-0410-b5e6-96231b3b80d8
A load from an invariant location is assumed to not alias any otherwise potentially aliasing stores. Our implementation only applied this rule to store instructions themselves whereas they it should apply for any memory accessing instruction. This results in both FRE and PRE becoming more effective at eliminating invariant loads.
Note that as a follow on change I will likely move this into AliasAnalysis itself. That's where the TBAA constant flag is handled and the semantics are essentially the same. I'd like to separate the semantic change from the refactoring and thus have extended the hack that's already in MemoryDependenceAnalysis for this change.
Differential Revision: http://reviews.llvm.org/D8591
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233140 91177308-0d34-0410-b5e6-96231b3b80d8
In a subtraction of the form A - B, if B is weak, there is no way to represent
that on ELF since all relocations add the value of a symbol.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233139 91177308-0d34-0410-b5e6-96231b3b80d8
We can't use TargetFrameLowering::getFrameIndexOffset directly, because
Win64 really wants the offset from the stack pointer at the end of the
prologue. Instead, use X86FrameLowering::getFrameIndexOffsetFromSP(),
which is a pretty close approximiation of that. It fails to handle cases
with interestingly large stack alignments, which is pretty uncommon on
Win64 and is TODO.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233137 91177308-0d34-0410-b5e6-96231b3b80d8
A while ago llvm-cov gained support for clang's instrumentation based
profiling in addition to its gcov support, and subcommands were added
to choose which behaviour to use. When no subcommand was specified, we
fell back to gcov compatibility with a warning that a subcommand would
be required in the future. Now, we require the subcommand.
Note that if the basename of llvm-cov is gcov (via symlink or
hardlink, for example), we still use the gcov compatible behaviour
with no subcommand required.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233132 91177308-0d34-0410-b5e6-96231b3b80d8
It seems one windows bot fails since I added ilne table linking to
llvm-dsymutil (see r232333 commit thread).
Disable the affected tests until I can figure out what's happening.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233130 91177308-0d34-0410-b5e6-96231b3b80d8
This patch tries to merge duplicate landing pads when they branch to a common shared target.
Given IR that looks like this:
lpad1:
%exn = landingpad {i8*, i32} personality i32 (...)* @__gxx_personality_v0
cleanup
br label %shared_resume
lpad2:
%exn2 = landingpad {i8*, i32} personality i32 (...)* @__gxx_personality_v0
cleanup
br label %shared_resume
shared_resume:
call void @fn()
ret void
}
We can rewrite the users of both landing pad blocks to use one of them. This will generally allow the shared_resume block to be merged with the common landing pad as well.
Without this change, tail duplication would likely kick in - creating N (2 in this case) copies of the shared_resume basic block.
Differential Revision: http://reviews.llvm.org/D8297
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233125 91177308-0d34-0410-b5e6-96231b3b80d8
Otherwise the tests would fail if the default was not elf_x86_64.
This fixes PR22966.
Patch by H.J. Lu!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233124 91177308-0d34-0410-b5e6-96231b3b80d8
Assert that this doesn't fire - I'll remove all of this later, but just
leaving it in for a while in case this is firing & we just don't have
test coverage.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233116 91177308-0d34-0410-b5e6-96231b3b80d8
This is the IR optimizer follow-on patch for D8563: the x86 backend patch
that converts this kind of shuffle back into a vperm2.
This is also a continuation of the transform that started in D8486.
In that patch, Andrea suggested that we could convert vperm2 intrinsics that
use zero masks into a single shuffle.
This is an implementation of that suggestion.
Differential Revision: http://reviews.llvm.org/D8567
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233110 91177308-0d34-0410-b5e6-96231b3b80d8
This caused PR23008, compiles failing with: "Use still stuck around after Def is
destroyed: %.sroa.speculated"
Also reverting follow-up r233064.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233105 91177308-0d34-0410-b5e6-96231b3b80d8
IRCE should not try to eliminate range checks that check an induction
variable against a loop-varying length.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233101 91177308-0d34-0410-b5e6-96231b3b80d8
The main verifier already recurses through the other entry points, so we
might as well descend here too.
This temporarily duplicates some work already done in
`verifyDebugInfo()`, but eventually I'll be removing the other side.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233095 91177308-0d34-0410-b5e6-96231b3b80d8
V_FRACT is buggy on SI.
R600-specific code is left intact.
v2: drop the multiclass, use complex VOP3 patterns
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233075 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Previous behaviour of 'R' and 'm' has been preserved for now. They will be
improved in subsequent commits.
The offset permitted by ZC varies according to the subtarget since it is
intended to match the restrictions of the pref, ll, and sc instructions.
The restrictions on these instructions are:
* For microMIPS: 12-bit signed offset.
* For Mips32r6/Mips64r6: 9-bit signed offset.
* Otherwise: 16-bit signed offset.
Reviewers: vkalintiris
Reviewed By: vkalintiris
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8414
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233063 91177308-0d34-0410-b5e6-96231b3b80d8
It is possible to have code that converts from integer to float, performs operations then converts back, and the result is provably the same as if integers were used.
This can come from different sources, but the most obvious is a helper function that uses floats but the arguments given at an inlined callsites are integers.
This pass considers all integers requiring a bitwidth less than or equal to the bitwidth of the mantissa of a floating point type (23 for floats, 52 for doubles) as exactly representable in floating point.
To reduce the risk of harming efficient code, the pass only attempts to perform complete removal of inttofp/fptoint operations, not just move them around.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233062 91177308-0d34-0410-b5e6-96231b3b80d8
While the uitofp scalar constant folding treats an integer as an unsigned value (from lang ref):
%X = sitofp i8 -1 to double ; yields double:-1.0
%Y = uitofp i8 -1 to double ; yields double:255.0
The vector constant folding was always using sitofp:
%X = sitofp <2 x i8> <i8 -1, i8 -1> to <2 x double> ; yields <double -1.0, double -1.0>
%Y = uitofp <2 x i8> <i8 -1, i8 -1> to <2 x double> ; yields <double -1.0, double -1.0>
This patch fixes this so that the correct opcode is used for sitofp and uitofp.
%X = sitofp <2 x i8> <i8 -1, i8 -1> to <2 x double> ; yields <double -1.0, double -1.0>
%Y = uitofp <2 x i8> <i8 -1, i8 -1> to <2 x double> ; yields <double 255.0, double 255.0>
Differential Revision: http://reviews.llvm.org/D8560
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233033 91177308-0d34-0410-b5e6-96231b3b80d8
Continue to simplify the `DIDescriptor` subclasses, so that they behave
more like raw pointers. Remove `getRaw()`, replace it with an
overloaded `get()`, and overload the arrow and cast operators. Two
testcases started to crash on the arrow operators with this change
because of `scope:` references that weren't real scopes. I fixed them.
Soon I'll add verifier checks for them too.
This also adds explicit dereference operators. Previously, the builtin
dereference against `operator MDNode *()` would have worked, but now the
builtins are ambiguous.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233030 91177308-0d34-0410-b5e6-96231b3b80d8
There is now a canonical symbol at the end of a section that different
passes can request.
This also allows us to assert that we don't switch back to a section whose
end symbol has already been printed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233026 91177308-0d34-0410-b5e6-96231b3b80d8
The pass used to be enabled by default with CodeGenOpt::Less (-O1).
This is too aggressive, considering the pass indiscriminately merges
all globals together.
Currently, performance doesn't always improve, and, on code that uses
few globals (e.g., the odd file- or function- static), more often than
not is degraded by the optimization. Lengthy discussion can be found
on llvmdev (AArch64-focused; ARM has similar problems):
http://lists.cs.uiuc.edu/pipermail/llvmdev/2015-February/082800.html
Also, it makes tooling and debuggers less useful when dealing with
globals and data sections.
GlobalMerge needs to better identify those cases that benefit, and this
will be done separately. In the meantime, move the pass to run with
-O3 rather than -O1, on both ARM and AArch64.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233024 91177308-0d34-0410-b5e6-96231b3b80d8
This enables very common cases to switch to the
smaller encoding.
All of the standard LLVM canonicalizations of comparisons
are the opposite of what we want. Compares with constants
are moved to the RHS, but the first operand can be an inline
immediate, literal constant, or SGPR using the 32-bit VOPC
encoding.
There are additional bad canonicalizations that should
also be fixed, such as canonicalizing ge x, k to gt x, (k + 1)
if this makes k no longer an inline immediate value.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232988 91177308-0d34-0410-b5e6-96231b3b80d8
This change is incorrect since it converts double rounding into single rounding,
which can produce different results. Instead this optimization will be done by
modifying Clang's codegen to not produce double rounding in the first place.
This reverts commit r232954.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232962 91177308-0d34-0410-b5e6-96231b3b80d8
This function assumed that SMRD instructions always have immediate
offsets, which is not always the case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232957 91177308-0d34-0410-b5e6-96231b3b80d8
Specifically when the conversion is done in two steps, f16 -> f32 -> f64.
For example:
%1 = tail call float @llvm.convert.from.fp16.f32(i16 %0)
%conv = fpext float %1 to double
to:
vcvtb.f64.f16
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232954 91177308-0d34-0410-b5e6-96231b3b80d8
Fixing sign extension in makeLibCall for MIPS64. In MIPS64 architecture all
32 bit arguments (int, unsigned int, float 32 (soft float)) must be sign
extended. This fixes test "MultiSource/Applications/oggenc/".
Patch by Strahinja Petrovic.
Differential Revision: http://reviews.llvm.org/D7791
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232943 91177308-0d34-0410-b5e6-96231b3b80d8
Because the operands of a vector SETCC node can be of a different type from the
result (and often are), it can happen that even if we'd prefer to widen the
result type of the SETCC, the operands have been split instead. In this case,
the SETCC result also must be split. This mirrors what is done in
WidenVecRes_SELECT, and should be NFC elsewhere because if the operands are not
widened the following calls to GetWidenedVector will assert (which is what was
happening in the test case).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232935 91177308-0d34-0410-b5e6-96231b3b80d8
A build directory with a name like `build-Werror` would hit a false
positive on these `CHECK-NOT`s before, since the actual error line looks
like:
.../build-Werror/bin/llvm-as <stdin>:1:2: error: ...
Switch to using:
CHECK-NOT: error:
(note the trailing semi-colon) to avoid matching almost any file path.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232917 91177308-0d34-0410-b5e6-96231b3b80d8
strchr("123!", C) != nullptr is a common pattern to check if C is one
of 1, 2, 3 or !. If the largest element of the string is smaller than
the target's register size we can easily create a bitfield and just
do a simple test for set membership.
int foo(char C) { return strchr("123!", C) != nullptr; } now becomes
cmpl $64, %edi ## range check
sbbb %al, %al
movabsq $0xE000200000001, %rcx
btq %rdi, %rcx ## bit test
sbbb %cl, %cl
andb %al, %cl ## and the two conditions
andb $1, %cl
movzbl %cl, %eax ## returning an int
ret
(imho the backend should expand this into a series of branches, but
that's a different story)
The code is currently limited to bit fields that fit in a register, so
usually 64 or 32 bits. Sadly, this misses anything using alpha chars
or {}. This could be fixed by just emitting a i128 bit field, but that
can generate really ugly code so we have to find a better way. To some
degree this is also recreating switch lowering logic, but we can't
simply emit a switch instruction and thus change the CFG within
instcombine.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232902 91177308-0d34-0410-b5e6-96231b3b80d8
r216771 introduced a change to MemoryDependenceAnalysis that allowed it
to reason about acquire/release operations. However, this change does
not ensure that the acquire/release operations pair. Unfortunately,
this leads to miscompiles as we won't see an acquire load as properly
memory effecting. This largely reverts r216771.
This fixes PR22708.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232889 91177308-0d34-0410-b5e6-96231b3b80d8
of this add a test that shows we can generate code for functions
that specifically enable a subtarget feature.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232884 91177308-0d34-0410-b5e6-96231b3b80d8
of this add a test that shows we can generate code with
for functions that differ by subtarget feature.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232882 91177308-0d34-0410-b5e6-96231b3b80d8
As preparation for removing the getSubtargetImpl() call from
TargetMachine go ahead and flip the switch on caching the function
dependent subtarget and remove the bare getSubtargetImpl call
from the X86 port. As part of this add a few tests that show we
can generate code and assemble on X86 based on features/cpu on
the Function.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232879 91177308-0d34-0410-b5e6-96231b3b80d8
If we couldn't analyze its terminator (i.e., it's an indirectbr, or some
other weirdness), we can't safely re-if-convert a predicated block,
because we can't tell whether the predicated terminator can
fallthrough (it does).
Currently, we would completely ignore the fallthrough successor. In
the added testcase, this means we used to generate:
...
@ %entry:
cmp r5, #21
ittt ne
@ %cc1f:
cmpne r7, #42
@ %cc2t:
strne.w r5, [r8]
movne pc, r10
@ %cc1t:
...
Whereas the successor of %cc1f was originally %bb1.
With the fix, we get the correct:
...
@ %entry:
cmp r5, #21
itt eq
@ %cc1t:
streq.w r5, [r11]
moveq pc, r0
@ %cc1f:
cmp r7, #42
itt ne
@ %cc2t:
strne.w r5, [r8]
movne pc, r10
@ %bb1:
...
rdar://20192768
Differential Revision: http://reviews.llvm.org/D8509
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232872 91177308-0d34-0410-b5e6-96231b3b80d8
vperm2* intrinsics are just shuffles.
In a few special cases, they're not even shuffles.
Optimizing intrinsics in InstCombine is better than
handling this in the front-end for at least two reasons:
1. Optimizing custom-written SSE intrinsic code at -O0 makes vector coders
really angry (and so I have regrets about some patches from last week).
2. Doing mask conversion logic in header files is hard to write and
subsequently read.
There are a couple of TODOs in this patch to complete this optimization.
Differential Revision: http://reviews.llvm.org/D8486
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232852 91177308-0d34-0410-b5e6-96231b3b80d8
With this patch, for this one exact case, we'll generate:
blendps %xmm0, %xmm1, $1
instead of:
insertps %xmm0, %xmm1, $0
If there's a memory operand available for load folding and we're
optimizing for size, we'll still generate the insertps.
The detailed performance data motivation for this may be found in D7866;
in summary, blendps has 2-3x throughput vs. insertps on widely used chips.
Differential Revision: http://reviews.llvm.org/D8332
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232850 91177308-0d34-0410-b5e6-96231b3b80d8
The code this patch removes was there to make sure the text sections went
before the dwarf sections. That is necessary because MachO uses offsets
relative to the start of the file, so adding a section can change relaxations.
The dwarf sections were being printed at the start just to produce symbols
pointing at the start of those sections.
The underlying issue was fixed in r231898. The dwarf sections are now printed
when they are about to be used, which is after we printed the text sections.
To make sure we don't regress, the patch makes the MachO streamer assert
if CodeGen puts anything unexpected after the DWARF sections.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232842 91177308-0d34-0410-b5e6-96231b3b80d8
These are causing crashes in `DebugInfoFinder` after a WIP patch to
increase strictness of `DIDescriptor` accessors.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232839 91177308-0d34-0410-b5e6-96231b3b80d8
The main differences are:
* Split in 32 and 64 bit functions.
* First switch on the Modifier so that we have only one non fully covered
switch.
* Map the fixup kind first to a x86_64 (or i386) specific enum, to make
it easy to handle cases like X86::reloc_riprel_4byte_movq_load.
* Switch on IsPCRel last, which reduces code duplication.
Fixes pr22308.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232837 91177308-0d34-0410-b5e6-96231b3b80d8
A WIP patch makes `DIDescriptor` accessors more strict, which in turn
causes the `DebugInfoFinder` to crash on wrongly typed `!dbg`
attachments. Catch that error up front in
`Verifier::visitInstruction()`.
Also remove a test that we "handle" invalid `!dbg` attachments, added
back in r99938. We don't want to handle those anymore.
Note: I'm *not* recursing and verifying the debug info graph reachable
from this node; that work is already done by `verifyDebugInfo()`.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232834 91177308-0d34-0410-b5e6-96231b3b80d8
This test is supposed to be testing whether metadata attachments to
instructions work, but it was using invalid debug info to do so. (This
was causing assertion failures in the `DebugInfoFinder` with a WIP patch
to be more strict about `DIDescriptor` accessors.)
Rather than fix the debug info -- which is better tested elsewhere --
just test the IR feature directly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232828 91177308-0d34-0410-b5e6-96231b3b80d8
When estimating SROA savings, we want to see if an address is derived
off an alloca in the caller. For store instructions, operand 1 is the
address operand, but the current code uses operand 0. Use
getPointerOperand for loads and stores to fix this.
Patch by Easwaran Raman.
http://reviews.llvm.org/D8425
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232827 91177308-0d34-0410-b5e6-96231b3b80d8
LocalStackSlotPass assumes that isFrameOffsetLegal doesn't change its
answer when the base register changes. Unfortunately this isn't true
in thumb1, where SP-based loads allow a larger offset than
non-SP-based loads, and this causes the base register reuse code to
generate instructions that are unencodable, causing an assertion
failure.
Solve this by adding a BaseReg parameter to isFrameOffsetLegal, which
ARMBaseRegisterInfo can then make use of to give the correct answer.
Differential Revision: http://reviews.llvm.org/D8419
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232825 91177308-0d34-0410-b5e6-96231b3b80d8
With the option -outline-optional-branches, LLVM will place optional
branches out of line (more details on r231230).
With this patch, this is not done for short optional branches. A short
optional branch is a branch containing a single block with an
instruction count below a certain threshold (defaulting to 3). Still
everything is guarded under -outline-optional-branches).
Outlining a short branch can't significantly improve code locality. It
can however decrease performance because of the additional jmp and in
cases where the optional branch is hot. This fixes a compile time
regression I have observed in a benchmark.
Review: http://reviews.llvm.org/D8108
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232802 91177308-0d34-0410-b5e6-96231b3b80d8
This works in a similar way to the gold plugin tests. We search for a compatible
linker on $PATH and use it to run tests against our just-built libLTO. To start
with, test the just added opt level functionality.
Differential Revision: http://reviews.llvm.org/D8472
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232785 91177308-0d34-0410-b5e6-96231b3b80d8
This is very related to the bug fixed in r174431. The problem is that
SelectionDAG does not include alignment in the uniquing of loads and
stores. When an otherwise no-op DAGCombine would increase the alignment
of a load or store, the original node would be returned (with the
alignment increased), which would cause the node not to be processed by
any further DAGCombines.
I don't have a direct testcase for this that manifests on an in-tree
target, but I did see some noise in the tests for other targets and have
updated them for it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232780 91177308-0d34-0410-b5e6-96231b3b80d8
This switches the sense of the i32 values and updates the test cases.
We can also use CHECK-SAME to clean up some tests, and reduce the visual
noise from bitcasts.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232774 91177308-0d34-0410-b5e6-96231b3b80d8
Another case of x86-specific shuffle strength reduction:
avoid generating insert*128 instructions with index 0 because
they are slower than their non-lane-changing blend equivalents.
Shuffle lowering already catches most of these cases, but
the zero vector case and some other paths such as in the
modified test in vector-shuffle-256-v32.ll were getting
through.
Differential Revision: http://reviews.llvm.org/D8366
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232773 91177308-0d34-0410-b5e6-96231b3b80d8
Each use of the byte array uses a different alias. This makes the
backend less likely to reuse previously computed byte array addresses,
improving the security of the CFI mechanism based on this pass.
Differential Revision: http://reviews.llvm.org/D8455
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232770 91177308-0d34-0410-b5e6-96231b3b80d8