Post-RA LICM keeps three sets of registers: PhysRegDefs, PhysRegClobbers
and TermRegs. When it sees a definition of R it adds all aliases of R
to the corresponding set, so that when it needs to test for membership
it only needs to test a single register, rather than worrying about
aliases there too. E.g. the final candidate loop just has:
unsigned Def = Candidates[i].Def;
if (!PhysRegClobbers.test(Def) && ...) {
to test whether register Def is multiply defined.
However, there was also a shortcut in ProcessMI to make sure we didn't
add candidates if we already knew that they would fail the final test.
This shortcut was more pessimistic than the final one because it
checked whether _any alias_ of the defined register was multiply defined.
This is too conservative for targets that define register pairs.
E.g. on z, R0 and R1 are sometimes used as a pair, so there is a
128-bit register that aliases both R0 and R1. If a loop used
R0 and R1 independently, and the definition of R0 came first,
we would be able to hoist the R0 assignment (because that used
the final test quoted above) but not the R1 assignment (because
that meant we had two definitions of the paired R0/R1 register
and would fail the shortcut in ProcessMI).
This patch just uses the same check for the ProcessMI shortcut as
we use in the final candidate loop.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188774 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes some of the cycles between libCodeGen and libSelectionDAG. It's still
a complete mess but as long as the edges consist of virtual call it doesn't
cause breakage. BasicTTI did static calls and thus broke some build
configurations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172246 91177308-0d34-0410-b5e6-96231b3b80d8
Sooooo many of these had incorrect or strange main module includes.
I have manually inspected all of these, and fixed the main module
include to be the nearest plausible thing I could find. If you own or
care about any of these source files, I encourage you to take some time
and check that these edits were sensible. I can't have broken anything
(I strictly added headers, and reordered them, never removed), but they
may not be the headers you'd really like to identify as containing the
API being implemented.
Many forward declarations and missing includes were added to a header
files to allow them to parse cleanly when included first. The main
module rule does in fact have its merits. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169131 91177308-0d34-0410-b5e6-96231b3b80d8
No functional change intended.
Sorry for the churn. The iterator classes are supposed to help avoid
giant commits like this one in the future. The TableGen-produced
register lists are getting quite large, and it may be necessary to
change the table representation.
This makes it possible to do so without changing all clients (again).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157854 91177308-0d34-0410-b5e6-96231b3b80d8
The getPointerRegClass() hook can return register classes that depend on
the calling convention of the current function (ptr_rc_tailcall).
So far, we have been able to infer the calling convention from the
subtarget alone, but as we add support for multiple calling conventions
per target, that no longer works.
Patch by Yiannis Tsiouris!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156328 91177308-0d34-0410-b5e6-96231b3b80d8
Allow cheap instructions to be hoisted if they are register pressure
neutral or better. This happens if the instruction is the last loop use
of another virtual register.
Only expensive instructions are allowed to increase loop register
pressure.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154455 91177308-0d34-0410-b5e6-96231b3b80d8
Hoisting a value that is used by a PHI in the loop will introduce a
copy because the live range is extended to cross the PHI.
The same applies to PHIs in exit blocks.
Also use this opportunity to make HasLoopPHIUse() non-recursive.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154454 91177308-0d34-0410-b5e6-96231b3b80d8
This caused miscompilations on out-of-tree targets, and possibly i386 as
well.
I'll find some other way of hoisting %rip-relative loads from loops
containing calls.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@150816 91177308-0d34-0410-b5e6-96231b3b80d8
When using register masks, registers like %rip are clobbered by the
register mask. LICM should still be able to hoist instructions reading
%rip from a loop containing calls.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@150288 91177308-0d34-0410-b5e6-96231b3b80d8
Moving toward a uniform style of pass definition to allow easier target configuration.
Globally declare Pass ID.
Globally declare pass initializer.
Use INITIALIZE_PASS consistently.
Add a call to the initializer from CodeGen.cpp.
Remove redundant "createPass" functions and "getPassName" methods.
While cleaning up declarations, cleaned up comments (sorry for large diff).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@150100 91177308-0d34-0410-b5e6-96231b3b80d8
It doesn't seem worthwhile to give meaning to a NULL register mask
pointer. It complicates all the code using register mask operands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@149646 91177308-0d34-0410-b5e6-96231b3b80d8
generator to it. For non-bundle instructions, these behave exactly the same
as the MC layer API.
For properties like mayLoad / mayStore, look into the bundle and if any of the
bundled instructions has the property it would return true.
For properties like isPredicable, only return true if *all* of the bundled
instructions have the property.
For properties like canFoldAsLoad, isCompare, conservatively return false for
bundles.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146026 91177308-0d34-0410-b5e6-96231b3b80d8
1. Added opcode BUNDLE
2. Taught MachineInstr class to deal with bundled MIs
3. Changed MachineBasicBlock iterator to skip over bundled MIs; added an iterator to walk all the MIs
4. Taught MachineBasicBlock methods about bundled MIs
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145975 91177308-0d34-0410-b5e6-96231b3b80d8
containing loop's header to see if that's a landing pad. If it is, then we don't
want to hoist instructions out of the loop and above the header.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141767 91177308-0d34-0410-b5e6-96231b3b80d8
1. The speculation check may not have been performed if the BB hasn't had a load
LICM candidate.
2. If the candidate would be CSE'ed, then go ahead and speculatively LICM the
instruction even if it's in high register pressure situation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141747 91177308-0d34-0410-b5e6-96231b3b80d8
The blocks with invokes have branches to the dispatch block, because that more
correctly models the behavior of the CFG. The dispatch of course has edges to
the landing pads. Those landing pads could contain invokes, which then have
branches back to the dispatch. This creates a loop. The machine LICM pass looks
at this loop and thinks it can hoist elements out of it. But because the
dispatch is an alternate entry point into the program, the hoisted instructions
won't be executed.
I wasn't able to get a testcase which was small and could reproduce all of the
time. The function_try_block.cpp in llvm-test was where this showed up.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141726 91177308-0d34-0410-b5e6-96231b3b80d8
For example, MachineLICM should not hoist a load that is not guaranteed to be executed.
Radar 10254254.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141689 91177308-0d34-0410-b5e6-96231b3b80d8
For example, MachineLICM should not hoist a load that is not guaranteed to be executed.
Radar 10254254.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141569 91177308-0d34-0410-b5e6-96231b3b80d8
