TwoAddressInstructionPass. The code in rescheduleMIBelowKill() is a bit tricky,
since multiple instructions need to be moved down, one-at-a-time, in reverse
order.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175955 91177308-0d34-0410-b5e6-96231b3b80d8
One of the phases of SelectionDAG is LegalizeVectors. We don't need to sort the DAG and copy nodes around if there are no vector ops.
Speeds up the compilation time of SelectionDAG on a big scalar workload by ~8%.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175929 91177308-0d34-0410-b5e6-96231b3b80d8
It was incorrectly checking a Function* being an IntrinsicInst* which
isn't possible. It should always have been checking the CallInst* instead.
Added test case for x86 which ensures we only get one constant load.
It was 2 before this change.
rdar://problem/13267920
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175853 91177308-0d34-0410-b5e6-96231b3b80d8
pass. One of the callers of isKilled() can cope with overapproximation of kills
and the other can't, so I added a flag to indicate this.
In theory this could pessimize code slightly, but in practice most physical
register uses are kills, and most important kills of physical registers are the
only uses of that register prior to register allocation, so we can recognize
them as kills even without kill flags.
This is relevant because LiveIntervals gets rid of all kill flags.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175821 91177308-0d34-0410-b5e6-96231b3b80d8
to TargetFrameLowering, where it belongs. Incidentally, this allows us
to delete some duplicated (and slightly different!) code in TRI.
There are potentially other layering problems that can be cleaned up
as a result, or in a similar manner.
The refactoring was OK'd by Anton Korobeynikov on llvmdev.
Note: this touches the target interfaces, so out-of-tree targets may
be affected.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175788 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes some problems with too conservative checking where we were
marking all aliases of a register as used, and then also checking all
aliases when allocating a register.
<rdar://problem/13249625>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175782 91177308-0d34-0410-b5e6-96231b3b80d8
A legal BUILD_VECTOR goes in and gets constant folded into another legal
BUILD_VECTOR so we don't lose any legality here. The problematic PPC
optimization that made this check necessary was fixed recently.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175759 91177308-0d34-0410-b5e6-96231b3b80d8
This brings the number of remaining failures in 'make check' without
LiveVariables down to 39, with 1 unexpectedly passing test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175727 91177308-0d34-0410-b5e6-96231b3b80d8
available.
With this commit there are no longer any assertion or verifier failures when
running 'make check' without LiveVariables. There are still 56 failing tests
with codegen differences and 1 unexpectedly passing test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175719 91177308-0d34-0410-b5e6-96231b3b80d8
Rewrite value numbers directly in the 'Other' LiveInterval which is
moribund anyway. This avoids allocating the OtherAssignments vector.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175690 91177308-0d34-0410-b5e6-96231b3b80d8
When findReachingDefs() finds that only one value can reach the basic
block, just copy the work list of visited blocks directly into the live
interval.
Sort the block list and use a LiveRangeUpdater to make the bulk add
fast.
When multiple reaching defs are found, transfer the work list to the
updateSSA() work list as before. Also use LiveRangeUpdater in
updateLiveIns() following updateSSA().
This makes live interval analysis more than 3x faster on one huge test
case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175685 91177308-0d34-0410-b5e6-96231b3b80d8
related failures when running 'make check' without LiveVariables with the
verifier enabled. Some of the remaining failures elsewhere may still be fallout
from incorrect updating of LiveIntervals or the few missing cases left in the
two-address pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175672 91177308-0d34-0410-b5e6-96231b3b80d8
(2xi32) (truncate ((2xi64) bitcast (buildvector i32 a, i32 x, i32 b, i32 y)))
can be folded into a (2xi32) (buildvector i32 a, i32 b).
Such a DAG would cause uneccessary vdup instructions followed by vmovn
instructions.
We generate this code on ARM NEON for a setcc olt, 2xf64, 2xf64. For example, in
the vectorized version of the code below.
double A[N];
double B[N];
void test_double_compare_to_double() {
int i;
for(i=0;i<N;i++)
A[i] = (double)(A[i] < B[i]);
}
radar://13191881
Fixes bug 15283.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175670 91177308-0d34-0410-b5e6-96231b3b80d8
Adding new segments to large LiveIntervals can be expensive because the
LiveRange objects after the insertion point may need to be moved left or
right. This can cause quadratic behavior when adding a large number of
segments to a live range.
The LiveRangeUpdater class allows the LIveInterval to be in a temporary
invalid state while segments are being added. It maintains an internal
gap in the LiveInterval when it is shrinking, and it has a spill area
for new segments when the LiveInterval is growing.
The behavior is similar to the existing mergeIntervalRanges() function,
except it allocates less memory for the spill area, and the algorithm is
turned inside out so the loop is driven by the clients.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175644 91177308-0d34-0410-b5e6-96231b3b80d8
- When extloading from a vector with non-byte-addressable element, e.g.
<4 x i1>, the current logic breaks. Extend the current logic to
fix the case where the element type is not byte-addressable by loading
all bytes, bit-extracting/packing each element.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175642 91177308-0d34-0410-b5e6-96231b3b80d8
and removing instructions. The implementation seems more complicated than it
needs to be, but I couldn't find something simpler that dealt with all of the
corner cases.
Also add a call to repairIndexesInRange() from repairIntervalsInRange().
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175601 91177308-0d34-0410-b5e6-96231b3b80d8
Target implementations of getRegAllocationHints() should use the
provided allocation order, and they can never return hints outside the
order. This is already documented in TargetRegisterInfo.h.
<rdar://problem/13240556>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175540 91177308-0d34-0410-b5e6-96231b3b80d8
Due to the execution order of doFinalization functions, the GC information were
deleted before AsmPrinter::doFinalization was executed. Thus, the
GCMetadataPrinter::finishAssembly was never called.
The patch fixes that by moving the code of the GCInfoDeleter::doFinalization to
Printer::doFinalization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175528 91177308-0d34-0410-b5e6-96231b3b80d8
arguably better than forward iterators for this use case, they are confusing and
there are some implementation problems with reverse iterators and MI bundles.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175393 91177308-0d34-0410-b5e6-96231b3b80d8
MachineBasicBlock::SplitCriticalEdge. Since this is an iterator rather than
an instr_iterator, the isBundled() check only passes if getFirstTerminator()
returned end() and the garbage memory happens to lean that way.
Multiple successors can be present without any terminator instructions in the
case of exception handling with a fallthrough.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175383 91177308-0d34-0410-b5e6-96231b3b80d8
terminators that actually have register uses when splitting critical edges.
This commit also introduces a method repairIntervalsInRange() on LiveIntervals,
which allows for repairing LiveIntervals in a small range after an arbitrary
target hook modifies, inserts, and removes instructions. It's pretty limited
right now, but I hope to extend it to support all of the things that are done
by the convertToThreeAddress() target hooks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175382 91177308-0d34-0410-b5e6-96231b3b80d8
If the frame pointer is omitted, and any stack changes occur in the inline
assembly, e.g.: "pusha", then any C local variable or C argument references
will be incorrect.
I pass no judgement on anyone who would do such a thing. ;)
rdar://13218191
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175334 91177308-0d34-0410-b5e6-96231b3b80d8
If two functions require different features (e.g., `-mno-sse' vs. `-msse') then
we want to honor that, especially during LTO. We can do that by resetting the
subtarget's features depending upon the 'target-feature' attribute.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175314 91177308-0d34-0410-b5e6-96231b3b80d8
- add sincos to runtime library if target triple environment is GNU
- added canCombineSinCosLibcall() which checks that sincos is in the RTL and
if the environment is GNU then unsafe fpmath is enabled (required to
preserve errno)
- extended sincos-opt lit test
Reviewed by: Hal Finkel
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175283 91177308-0d34-0410-b5e6-96231b3b80d8
of the copy is a subregister def. The current code assumes that it can do a full
def of the destination register, but it is not checking that the def operand is
read-undef. It also doesn't clear the subregister index of the destination in
the new instruction to reflect the full subregister def.
These issues were found running 'make check' with my next commit that enables
rematerialization in more cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175122 91177308-0d34-0410-b5e6-96231b3b80d8
Remove dead functions: renameRegister
Move private member variables from LDV to Impl
Remove ssp/uwtable from testing case
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175072 91177308-0d34-0410-b5e6-96231b3b80d8
RegisterCoalescer used to depend on LiveDebugVariable. LDV removes DBG_VALUEs
without emitting them at the end.
We fix this by removing LDV from RegisterCoalescer. Also add an assertion to
make sure we call emitDebugValues if DBG_VALUEs are removed at
runOnMachineFunction.
rdar://problem/13183203
Reviewed by Andy & Jakob
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175023 91177308-0d34-0410-b5e6-96231b3b80d8
MI sched DAG construction allows targets to include terminators into scheduling DAG.
Extend this functionality to labels as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174977 91177308-0d34-0410-b5e6-96231b3b80d8
DAGCombiner::ReduceLoadWidth was converting (trunc i32 (shl i64 v, 32))
into (shl i32 v, 32) into undef. To prevent this, check the shift count
against the final result size.
Patch by: Kevin Schoedel
Reviewed by: Nadav Rotem
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174972 91177308-0d34-0410-b5e6-96231b3b80d8
live ranges should always be extended, and the only successor that should be
considered for extension of other ranges is the target of the split edge.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174935 91177308-0d34-0410-b5e6-96231b3b80d8
Sorry for the lack of a test case. I tried writing one for i386 as i know selects are illegal on this target, but they are actually considered legal by isel and expanded later.
I can't see any targets to trigger this, but checking for the legality of a node before forming it is general goodness.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174934 91177308-0d34-0410-b5e6-96231b3b80d8
This is currently a bit hairier than it needs to be, since depending on where the
split block resides the end ListEntry of the split block may be the end ListEntry
of the original block or a new entry. Some changes to the SlotIndexes updating
should make it possible to eliminate the two cases here.
This also isn't as optimized as it could be. In the future Liveinterval should
probably get a flag that indicates whether the LiveInterval is within a single
basic block. We could ignore all such intervals when splitting an edge.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174870 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts my commit 171047. Now that I've removed my misguided attempt to
support backend warnings, these diagnostics are only about inline assembly.
It would take quite a bit more work to generalize them properly, so I'm
just reverting this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174860 91177308-0d34-0410-b5e6-96231b3b80d8
function is successfully handled by fast-isel. That's because function
arguments are *always* handled by SDISel. Introduce FastLowerArguments to
allow each target to provide hook to handle formal argument lowering.
As a proof-of-concept, add ARMFastIsel::FastLowerArguments to handle
functions with 4 or fewer scalar integer (i8, i16, or i32) arguments. It
completely eliminates the need for SDISel for trivial functions.
rdar://13163905
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174855 91177308-0d34-0410-b5e6-96231b3b80d8
support for updating SlotIndexes to MachineBasicBlock::SplitCriticalEdge(). This
calls renumberIndexes() every time; it should be improved to only renumber
locally.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174851 91177308-0d34-0410-b5e6-96231b3b80d8
present, it currently verifies them with the MachineVerifier, and this passed
all of the test cases in 'make check' (when accounting for existing verifier
errors). There were some assertion failures in the two-address pass, but they
also happened on code without phis and look like they are caused by different
kill flags from LiveIntervals.
The only part that doesn't work is the critical edge splitting heuristic,
because there isn't currently an efficient way to update LiveIntervals after
splitting an edge. I'll probably start by implementing the slow fallback and
test that it works before tackling the fast path for single-block ranges. The
existing code that updates LiveVariables is fairly slow as it is.
There isn't a command-line option for enabling this; instead, just edit
PHIElimination.cpp to require LiveIntervals.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174831 91177308-0d34-0410-b5e6-96231b3b80d8
This uses a liveness algorithm that does not depend on data from the
LiveVariables analysis, it is the first step towards removing
LiveVariables completely.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174774 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts r171041. This was a nice idea that didn't work out well.
Clang warnings need to be associated with warning groups so that they can
be selectively disabled, promoted to errors, etc. This simplistic patch didn't
allow for that. Enhancing it to provide some way for the backend to specify
a front-end warning type seems like overkill for the few uses of this, at
least for now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174748 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, even when a pre-increment load or store was generated,
we often needed to keep a copy of the original base register for use
with other offsets. If all of these offsets are constants (including
the offset which was combined into the addressing mode), then this is
clearly unnecessary. This change adjusts these other offsets to use the
new incremented address.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174746 91177308-0d34-0410-b5e6-96231b3b80d8
Aside from the question of whether we report a warning or an error when we
can't satisfy a requested stack object alignment, the current implementation
of this is not good. We're not providing any source location in the diagnostics
and the current warning is not connected to any warning group so you can't
control it. We could improve the source location somewhat, but we can do a
much better job if this check is implemented in the front-end, so let's do that
instead. <rdar://problem/13127907>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174741 91177308-0d34-0410-b5e6-96231b3b80d8
Adds a function to target transform info to query for the cost of address
computation. The cost model analysis pass now also queries this interface.
The code in LoopVectorize adds the cost of address computation as part of the
memory instruction cost calculation. Only there, we know whether the instruction
will be scalarized or not.
Increase the penality for inserting in to D registers on swift. This becomes
necessary because we now always assume that address computation has a cost and
three is a closer value to the architecture.
radar://13097204
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174713 91177308-0d34-0410-b5e6-96231b3b80d8
syms before constructing the compile units so we're not emitting
section references to sections not there already.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174663 91177308-0d34-0410-b5e6-96231b3b80d8
Failure: undefined symbol 'Lline_table_start0'.
Root-cause: we use a symbol subtraction to calculate at_stmt_list, but
the line table entries are not dumped in the assembly.
Fix: use zero instead of a symbol subtraction for Compile Unit 0.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174479 91177308-0d34-0410-b5e6-96231b3b80d8
We generate one line table for each compilation unit in the object file.
Reviewed by Eric and Kevin.
rdar://problem/13067005
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174445 91177308-0d34-0410-b5e6-96231b3b80d8
base point of a load, and the overall alignment of the load. This caused infinite loops in DAG combine with the
original application of this patch.
ORIGINAL COMMIT LOG:
When the target-independent DAGCombiner inferred a higher alignment for a load,
it would replace the load with one with the higher alignment. However, it did
not place the new load in the worklist, which prevented later DAG combines in
the same phase (for example, target-specific combines) from ever seeing it.
This patch corrects that oversight, and updates some tests whose output changed
due to slightly different DAGCombine outputs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174431 91177308-0d34-0410-b5e6-96231b3b80d8
All targets are now adding return value registers as implicit uses on
return instructions, and there is no longer a need for the live out
lists.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174417 91177308-0d34-0410-b5e6-96231b3b80d8
Now that return value registers are return instruction uses, there is no
need for special treatment of return blocks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174416 91177308-0d34-0410-b5e6-96231b3b80d8
It caused hangups in compiling clang/lib/Parse/ParseDecl.cpp and clang/lib/Driver/Tools.cpp in stage2 on some hosts.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174374 91177308-0d34-0410-b5e6-96231b3b80d8
it would replace the load with one with the higher alignment. However, it did
not place the new load in the worklist, which prevented later DAG combines in
the same phase (for example, target-specific combines) from ever seeing it.
This patch corrects that oversight, and updates some tests whose output changed
due to slightly different DAGCombine outputs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174343 91177308-0d34-0410-b5e6-96231b3b80d8
Per discussion in rdar://13127907, we should emit a hard error only if
people write code where the requested alignment is larger than achievable
and assumes the low bits are zeros. A warning should be good enough when
we are not sure if the source code assumes the low bits are zeros.
rdar://13127907
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174336 91177308-0d34-0410-b5e6-96231b3b80d8
This required disabling a PowerPC optimization that did the following:
input:
x = BUILD_VECTOR <i32 16, i32 16, i32 16, i32 16>
lowered to:
tmp = BUILD_VECTOR <i32 8, i32 8, i32 8, i32 8>
x = ADD tmp, tmp
The add now gets folded immediately and we're back at the BUILD_VECTOR we
started from. I don't see a way to fix this currently so I left it disabled
for now.
Fix some trivially foldable X86 tests too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174325 91177308-0d34-0410-b5e6-96231b3b80d8
We used to create children DIEs for a scope, then check whether ScopeDIE is
null. If ScopeDIE is null, the children DIEs will be dangling. Other DIEs can
link to those dangling DIEs, which are not emitted at all, causing dwarf error.
The current testing case is 4k lines, from MultiSource/BenchMark/McCat/09-vor.
rdar://problem/13071959
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174084 91177308-0d34-0410-b5e6-96231b3b80d8
conditions are met:
1. They share the same operand and are in the same BB.
2. Both outputs are used.
3. The target has a native instruction that maps to ISD::FSINCOS node or
the target provides a sincos library call.
Implemented the generic optimization in sdisel and enabled it for
Mac OSX. Also added an additional optimization for x86_64 Mac OSX by
using an alternative entry point __sincos_stret which returns the two
results in xmm0 / xmm1.
rdar://13087969
PR13204
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173755 91177308-0d34-0410-b5e6-96231b3b80d8
The common code in the post-RA scheduler to break anti-dependencies on the
critical path contained a flaw. In the reported case, an anti-dependency
between the overlapping registers %X4 and %R4 exists:
%X29<def> = OR8 %X4, %X4
%R4<def>, %X3<def,dead,tied3> = LBZU 1, %X3<kill,tied1>
The unpatched code breaks the dependency by replacing %R4 and its uses
with %R3, the first register on the available list. However, %R3 and
%X3 overlap, so this creates two overlapping definitions on the same
instruction.
The fix is straightforward, preventing selection of a register that
overlaps any other defined register on the same instruction.
The test case is reduced from the bug report, and verifies that we no
longer produce "lbzu 3, 1(3)" when breaking this anti-dependency.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173706 91177308-0d34-0410-b5e6-96231b3b80d8
Fix that by adding a cast to the shift expander. This came up with vector shifts
on sse-less X86 CPUs.
<2 x i64> = shl <2 x i64> <2 x i64>
-> i64,i64 = shl i64 i64; shl i64 i64
-> i32,i32,i32,i32 = shl_parts i32 i32 i64; shl_parts i32 i32 i64
Now we cast the last two i64s to the right type. Fixes the crash in PR14668.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173615 91177308-0d34-0410-b5e6-96231b3b80d8
with an initial number of elements, instead of DenseMap, which has
zero initial elements, in order to avoid the copying of elements
when the size changes and to avoid allocating space every time
LegalizeTypes is run. This patch will not affect the memory footprint,
because DenseMap will increase the element size to 64
when the first element is added.
Patch by Wan Xiaofei.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173448 91177308-0d34-0410-b5e6-96231b3b80d8
Maintain separate per-node and per-tree book-keeping.
Track all instructions above a DAG node including nested subtrees.
Seperately track instructions within a subtree.
Record subtree parents.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173426 91177308-0d34-0410-b5e6-96231b3b80d8
Allow the strategy to select SchedDFS. Allow the results of SchedDFS
to affect initialization of the scheduler state.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173425 91177308-0d34-0410-b5e6-96231b3b80d8
This is mostly refactoring, along with adding an instruction count
within the subtrees and ensuring we only look at data edges.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173420 91177308-0d34-0410-b5e6-96231b3b80d8
For sanity, create a root when NumDataSuccs >= 4. Splitting large
subtrees will no longer be detrimental after my next checkin to handle
nested tree. A magic number of 4 is fine because single subtrees
seldom rejoin more than this. It makes subtrees easier to visualize
and heuristics more sane.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173399 91177308-0d34-0410-b5e6-96231b3b80d8
Allow schedulers to order DAG edges by critical path. This makes
DFS-based heuristics more stable and effective.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173317 91177308-0d34-0410-b5e6-96231b3b80d8
The requirements of the strong heuristic are:
* A Protector is required for functions which contain an array, regardless of
type or length.
* A Protector is required for functions which contain a structure/union which
contains an array, regardless of type or length. Note, there is no limit to
the depth of nesting.
* A protector is required when the address of a local variable (i.e., stack
based variable) is exposed. (E.g., such as through a local whose address is
taken as part of the RHS of an assignment or a local whose address is taken as
part of a function argument.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173231 91177308-0d34-0410-b5e6-96231b3b80d8
SSPStrong applies a heuristic to insert stack protectors in these situations:
* A Protector is required for functions which contain an array, regardless of
type or length.
* A Protector is required for functions which contain a structure/union which
contains an array, regardless of type or length. Note, there is no limit to
the depth of nesting.
* A protector is required when the address of a local variable (i.e., stack
based variable) is exposed. (E.g., such as through a local whose address is
taken as part of the RHS of an assignment or a local whose address is taken as
part of a function argument.)
This patch implements the SSPString attribute to be equivalent to
SSPRequired. This will change in a subsequent patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173230 91177308-0d34-0410-b5e6-96231b3b80d8
Previously we tried to infer it from the bit width size, with an added
IsIEEE argument for the PPC/IEEE 128-bit case, which had a default
value. This default value allowed bugs to creep in, where it was
inappropriate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173138 91177308-0d34-0410-b5e6-96231b3b80d8
A SparseMultiSet adds multiset behavior to SparseSet, while retaining SparseSet's desirable properties. Essentially, SparseMultiSet provides multiset behavior by storing its dense data in doubly linked lists that are inlined into the dense vector. This allows it to provide good data locality as well as vector-like constant-time clear() and fast constant time find(), insert(), and erase(). It also allows SparseMultiSet to have a builtin recycler rather than keeping SparseSet's behavior of always swapping upon removal, which allows it to preserve more iterators. It's often a better alternative to a SparseSet of a growable container or vector-of-vector.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173064 91177308-0d34-0410-b5e6-96231b3b80d8
The optimization handles esoteric cases but adds a lot of complexity both to the X86 backend and to other backends.
This optimization disables an important canonicalization of chains of SEXT nodes and makes SEXT and ZEXT asymmetrical.
Disabling the canonicalization of consecutive SEXT nodes into a single node disables other DAG optimizations that assume
that there is only one SEXT node. The AVX mask optimizations is one example. Additionally this optimization does not update the cost model.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172968 91177308-0d34-0410-b5e6-96231b3b80d8
