InstCombine can be uncooperative to vectorization and sink loads into
conditional blocks. This prevents vectorization.
Undo this optimization if there are unconditional memory accesses to the same
addresses in the loop.
radar://13815763
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181860 91177308-0d34-0410-b5e6-96231b3b80d8
There were two problems that made llvm-objdump -r crash:
- for non-scattered relocations, the symbol/section index is actually in the
(aptly named) symbolnum field.
- sections are 1-indexed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181843 91177308-0d34-0410-b5e6-96231b3b80d8
The transformation happening here is that we want to turn a
"mul(ext(X), ext(X))" into a "vmull(X, X)", stripping off the extension. We have
to make sure that X still has a valid vector type - possibly recreate an
extension to a smaller type. In case of a extload of a memory type smaller than
64 bit we used create a ext(load()). The problem with doing this - instead of
recreating an extload - is that an illegal type is exposed.
This patch fixes this by creating extloads instead of ext(load()) sequences.
Fixes PR15970.
radar://13871383
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181842 91177308-0d34-0410-b5e6-96231b3b80d8
CXAAtExitFn was set outside a loop and before optimizations where functions
can be deleted. This patch will set CXAAtExitFn inside the loop and after
optimizations.
Seg fault when running LTO because of accesses to a deleted function.
rdar://problem/13838828
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181838 91177308-0d34-0410-b5e6-96231b3b80d8
ARM FastISel is currently only enabled for iOS non-Thumb1, and I'm working on
enabling it for other targets. As a first step I've fixed some of the tests.
Changes to ARM FastISel tests:
- Different triples don't generate the same relocations (especially
movw/movt versus constant pool loads). Use a regex to allow either.
- Mangling is different. Use a regex to allow either.
- The reserved registers are sometimes different, so registers get
allocated in a different order. Capture the names only where this
occurs.
- Add -verify-machineinstrs to some tests where it works. It doesn't
work everywhere it should yet.
- Add -fast-isel-abort to many tests that didn't have it before.
- Split out the VarArg test from fast-isel-call.ll into its own
test. This simplifies test setup because of --check-prefix.
Patch by JF Bastien
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181801 91177308-0d34-0410-b5e6-96231b3b80d8
The changes to CR spill handling missed a case for 32-bit PowerPC.
The code in PPCFrameLowering::processFunctionBeforeFrameFinalized()
checks whether CR spill has occurred using a flag in the function
info. This flag is only set by storeRegToStackSlot and
loadRegFromStackSlot. spillCalleeSavedRegisters does not call
storeRegToStackSlot, but instead produces MI directly. Thus we don't
see the CR is spilled when assigning frame offsets, and the CR spill
ends up colliding with some other location (generally the FP slot).
This patch sets the flag in spillCalleeSavedRegisters for PPC32 so
that the CR spill is properly detected and gets its own slot in the
stack frame.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181800 91177308-0d34-0410-b5e6-96231b3b80d8
The GNU assembler treats things like:
brasl %r14, 100
in the same way as:
brasl %r14, .+100
rather than as a branch to absolute address 100. We implemented this in
LLVM by creating an immediate operand rather than the usual expr operand,
and by handling immediate operands specially in the code emitter.
This was undesirable for (at least) three reasons:
- the specialness of immediate operands was exposed to the backend MC code,
rather than being limited to the assembler parser.
- in disassembly, an immediate operand really is an absolute address.
(Note that this means reassembling printed disassembly can't recreate
the original code.)
- it would interfere with any assembly manipulation that we might
try in future. E.g. operations like branch shortening can change
the relative position of instructions, but any code that updates
sym+offset addresses wouldn't update an immediate "100" operand
in the same way as an explicit ".+100" operand.
This patch changes the implementation so that the assembler creates
a "." label for immediate PC-relative operands, so that the operand
to the MCInst is always the absolute address. The patch also adds
some error checking of the offset.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181773 91177308-0d34-0410-b5e6-96231b3b80d8
Mips16/32 floating point interoperability.
When Mips16 code calls external functions that would normally have some
of its parameters or return values passed in floating point registers,
it needs (Mips32) helper functions to do this because while in Mips16 mode
there is no ability to access the floating point registers.
In Pic mode, this is done with a set of predefined functions in libc.
This case is already handled in llvm for Mips16.
In static relocation mode, for efficiency reasons, the compiler generates
stubs that the linker will use if it turns out that the external function
is a Mips32 function. (If it's Mips16, then it does not need the helper
stubs).
These stubs are identically named and the linker knows about these tricks
and will not create multiple copies and will delete them if they are not
needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181753 91177308-0d34-0410-b5e6-96231b3b80d8
object is a PseudoSourceValue and PseudoSourceValue::isConstant returns true (i.e.,
points to memory that has a constant value).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181751 91177308-0d34-0410-b5e6-96231b3b80d8
We used to give up if we saw two integer inductions. After this patch, we base
further induction variables on the chosen one like we do in the reverse
induction and pointer induction case.
Fixes PR15720.
radar://13851975
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181746 91177308-0d34-0410-b5e6-96231b3b80d8
In the presense of a block being initialized, the frontend will emit the
objc_retain on the original pointer and the release on the pointer loaded from
the alloca. The optimizer will through the provenance analysis realize that the
two are related (albiet different), but since we only require KnownSafe in one
direction, will match the inner retain on the original pointer with the guard
release on the original pointer. This is fixed by ensuring that in the presense
of allocas we only unconditionally remove pointers if both our retain and our
release are KnownSafe (i.e. we are KnownSafe in both directions) since we must
deal with the possibility that the frontend will emit what (to the optimizer)
appears to be unbalanced retain/releases.
An example of the miscompile is:
%A = alloca
retain(%x)
retain(%x) <--- Inner Retain
store %x, %A
%y = load %A
... DO STUFF ...
release(%y)
call void @use(%x)
release(%x) <--- Guarding Release
getting optimized to:
%A = alloca
retain(%x)
store %x, %A
%y = load %A
... DO STUFF ...
release(%y)
call void @use(%x)
rdar://13750319
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181743 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds alias for addiu instruction which enables following syntax:
addiu $rs,imm
The macro is translated as:
addiu $rs,$rs,imm
Contributer: Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181729 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes warning messages observed in the oggenc application test in
projects/test-suite. Special handling is needed for the 64-bit
PowerPC SVR4 ABI when a constant is initialized with a pointer to a
function in a shared library. Because a function address is
implemented as the address of a function descriptor, the use of copy
relocations can lead to problems with initialization. GNU ld
therefore replaces copy relocations with dynamic relocations to be
resolved by the dynamic linker. This means the constant cannot reside
in the read-only data section, but instead belongs in .data.rel.ro,
which is designed for constants containing dynamic relocations.
The implementation creates a class PPC64LinuxTargetObjectFile
inheriting from TargetLoweringObjectFileELF, which behaves like its
parent except to place constants of this sort into .data.rel.ro.
The test case is reduced from the oggenc application.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181723 91177308-0d34-0410-b5e6-96231b3b80d8
This option is used when the user wants to avoid emitting double precision FP
loads and stores. Double precision FP loads and stores are expanded to single
precision instructions after register allocation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181718 91177308-0d34-0410-b5e6-96231b3b80d8
return values are bitcasts.
The chain had previously been being clobbered with the entry node to
the dag, which sometimes caused other code in the function to be
erroneously deleted when tailcall optimization kicked in.
<rdar://problem/13827621>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181696 91177308-0d34-0410-b5e6-96231b3b80d8
The external user does not have to be in lane #0. We have to save the lane for each scalar so that we know which vector lane to extract.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181674 91177308-0d34-0410-b5e6-96231b3b80d8
There are two transforms in visitUrem that conflict with each other.
*) One, if a divisor is a power of two, subtracts one from the divisor
and turns it into a bitwise-and.
*) The other unwraps both operands if they are surrounded by zext
instructions.
Flipping the order allows the subtraction to go beneath the sign
extension.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181668 91177308-0d34-0410-b5e6-96231b3b80d8
Use the widest induction type encountered for the cannonical induction variable.
We used to turn the following loop into an empty loop because we used i8 as
induction variable type and truncated 1024 to 0 as trip count.
int a[1024];
void fail() {
int reverse_induction = 1023;
unsigned char forward_induction = 0;
while ((reverse_induction) >= 0) {
forward_induction++;
a[reverse_induction] = forward_induction;
--reverse_induction;
}
}
radar://13862901
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181667 91177308-0d34-0410-b5e6-96231b3b80d8
For example:
bar() {
int a = A[i];
int b = A[i+1];
B[i] = a;
B[i+1] = b;
foo(a); <--- a is used outside the vectorized expression.
}
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181648 91177308-0d34-0410-b5e6-96231b3b80d8
mips16/mips32 floating point interoperability.
This patch fixes returns from mips16 functions so that if the function
was in fact called by a mips32 hard float routine, then values
that would have been returned in floating point registers are so returned.
Mips16 mode has no floating point instructions so there is no way to
load values into floating point registers.
This is needed when returning float, double, single complex, double complex
in the Mips ABI.
Helper functions in libc for mips16 are available to do this.
For efficiency purposes, these helper functions have a different calling
convention from normal Mips calls.
Registers v0,v1,a0,a1 are used to pass parameters instead of
a0,a1,a2,a3.
This is because v0,v1,a0,a1 are the natural registers used to return
floating point values in soft float. These values can then be moved
to the appropriate floating point registers with no extra cost.
The only register that is modified is ra in this call.
The helper functions make sure that the return values are in the floating
point registers that they would be in if soft float was not in effect
(which it is for mips16, though the soft float is implemented using a mips32
library that uses hard float).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181641 91177308-0d34-0410-b5e6-96231b3b80d8
This is only tested for global variables at the moment (& includes tests
for the unnamed parameter case, since apparently this entire function
was completely untested previously)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181632 91177308-0d34-0410-b5e6-96231b3b80d8
The issue was that the MatchingInlineAsm and VariantID args to the
MatchInstructionImpl function weren't being set properly. Specifically, when
parsing intel syntax, the parser thought it was parsing inline assembly in the
at&t dialect; that will never be the case.
The crash was caused when the emitter tried to emit the instruction, but the
operands weren't set. When parsing inline assembly we only set the opcode, not
the operands, which is used to lookup the instruction descriptor.
rdar://13854391 and PR15945
Also, this commit reverts r176036. Now that we're correctly parsing the intel
syntax the pushad/popad don't match properly. I've reimplemented that fix using
a MnemonicAlias.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181620 91177308-0d34-0410-b5e6-96231b3b80d8
The shift amount may be larger than the type leading to undefined behavior.
Limit the transform to constant shift amounts. While there update the bits to
clear in the result which may enable additional optimizations.
PR15959.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181604 91177308-0d34-0410-b5e6-96231b3b80d8
This commit implements the AsmParser for fnstart, fnend,
cantunwind, personality, handlerdata, pad, setfp, save, and
vsave directives.
This commit fixes some minor issue in the ARMELFStreamer:
* The switch back to corresponding section after the .fnend
directive.
* Emit the unwind opcode while processing .fnend directive
if there is no .handlerdata directive.
* Emit the unwind opcode to .ARM.extab while processing
.handlerdata even if .personality directive does not exist.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181603 91177308-0d34-0410-b5e6-96231b3b80d8
