Commit Graph

8563 Commits

Author SHA1 Message Date
Richard Sandiford
3764521658 [SystemZ] Use RISBG for (shift (and ...))
Another patch in the series to make more use of R.SBG.  This one extends
r186072 and r186073 to handle cases where the AND is inside the shift.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186399 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-16 11:02:24 +00:00
Tim Northover
2f438131f1 ARM: implement ldrex, strex and clrex intrinsics
Intrinsics already existed for the 64-bit variants, so these support operations
of size at most 32-bits.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186392 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-16 09:46:55 +00:00
Renato Golin
103ba845f0 ARM EABI divmod support
This patch enables calls to __aeabi_idivmod when in EABI mode,
by using the remainder value returned on registers (R1),
enabled by the ARM triple "none-eabi". Note that Darwin and
GNUEABI triples will continue lowering on GNU style, that is,
using the stack for the remainder.

Still need to add SREM/UREM support fix for 64-bit lowering.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186390 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-16 09:32:17 +00:00
Manman Ren
519127f758 PEI: Support for non-zero SPAdj at beginning of a basic block.
We can have a FrameSetup in one basic block and the matching FrameDestroy
in a different basic block when we have struct byval. In that case, SPAdj
is not zero at beginning of the basic block.

Modify PEI to correctly set SPAdj at beginning of each basic block using
DFS traversal. We used to assume SPAdj is 0 at beginning of each basic block.

PEI had an assert SPAdjCount || SPAdj == 0.
If we have a Destroy <n> followed by a Setup <m>, PEI will assert failure.
We can add an extra condition to make sure the pairs are matched:
  The pairs start with a FrameSetup.
But since we are doing a much better job in the verifier, this patch removes
the check in PEI.

PR16393


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186364 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-15 23:47:29 +00:00
Hal Finkel
ae4f3f6820 Fix register subclass handling in PPCInstrInfo::insertSelect
PPCInstrInfo::insertSelect and PPCInstrInfo::canInsertSelect were computing the
common subclass of the true and false inputs, and then selecting either the
32-bit or the 64-bit isel variant based on the result of calling
PPC::GPRCRegClass.hasSubClassEq(RC) and PPC::G8RCRegClass.hasSubClassEq(RC)
(where RC is the common subclass). Unfortunately, this is not quite right: if
we have something like this:

  %vreg8<def> = SELECT_CC_I8 %vreg4<kill>, %vreg7<kill>, %vreg6<kill>, 76;
    G8RC_and_G8RC_NOX0:%vreg8 CRRC:%vreg4 G8RC_NOX0:%vreg7,%vreg6

then the common subclass of G8RC_and_G8RC_NOX0 and G8RC_NOX0 is G8RC_NOX0, and
G8RC_NOX0 is not a subclass of G8RC (because it also contains the ZERO8
pseudo-register). As a result, we also need to check the common subclass
against GPRC_NOR0 and G8RC_NOX0 explicitly.

This had not been a problem for clients of insertSelect that called
canInsertSelect first (because it had a compensating mistake), but insertSelect
is also used by the PPC pseudo-instruction expander, and this error was causing
a problem in that context.

This problem was found by csmith.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186343 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-15 20:22:58 +00:00
Tom Stellard
cd0f245864 R600/SI: Add support for 64-bit loads
https://bugs.freedesktop.org/show_bug.cgi?id=65873

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186339 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-15 19:00:09 +00:00
Hal Finkel
d1654a769c Remove invalid assert in DAGTypeLegalizer::RemapValue
There is a comment at the top of DAGTypeLegalizer::PerformExpensiveChecks
which, in part, says:

  // Note that these invariants may not hold momentarily when processing a node:
  // the node being processed may be put in a map before being marked Processed.

Unfortunately, this assert would be valid only if the above-mentioned invariant
held unconditionally. This was causing llc to assert when, in fact,
everything was fine.

Thanks to Richard Sandiford for investigating this issue!

Fixes PR16562.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186338 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-15 18:57:05 +00:00
Anton Korobeynikov
c7c4a7867c Use conventional syntax for branches.
Patch by Job!


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186291 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-14 18:19:44 +00:00
Anton Korobeynikov
a77f816c4c Properly lower jump tables on MSP430. Patch by Job Noorman!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186283 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-14 15:11:00 +00:00
Stephen Lin
8b2b8a1835 Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally.
This update was done with the following bash script:

  find test/CodeGen -name "*.ll" | \
  while read NAME; do
    echo "$NAME"
    if ! grep -q "^; *RUN: *llc.*debug" $NAME; then
      TEMP=`mktemp -t temp`
      cp $NAME $TEMP
      sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \
      while read FUNC; do
        sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP
      done
      sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP
      sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP
      sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP
      sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP
      mv $TEMP $NAME
    fi
  done


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186280 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-14 06:24:09 +00:00
Stephen Lin
60808c76b4 Convert Windows to Unix line endings, no functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186264 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-13 22:08:55 +00:00
Stephen Lin
b4dc0233c9 Convert CodeGen/*/*.ll tests to use the new CHECK-LABEL for easier debugging. No functionality change and all tests pass after conversion.
This was done with the following sed invocation to catch label lines demarking function boundaries:
    sed -i '' "s/^;\( *\)\([A-Z0-9_]*\):\( *\)test\([A-Za-z0-9_-]*\):\( *\)$/;\1\2-LABEL:\3test\4:\5/g" test/CodeGen/*/*.ll
which was written conservatively to avoid false positives rather than false negatives. I scanned through all the changes and everything looks correct.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186258 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-13 20:38:47 +00:00
Benjamin Kramer
61a0bac2be Convert a couple of grep tests to FileCheck.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186250 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-13 17:30:25 +00:00
Akira Hatanaka
2bd429a987 [mips] Remove trailing whitespace.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186230 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-12 23:47:38 +00:00
Akira Hatanaka
434c0bd2a5 [mips] Implement MipsTargetMachine::getInstrItineraryData().
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186227 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-12 23:33:22 +00:00
JF Bastien
1b6f5a29ab Fix ARM paired GPR COPY lowering
ARM paired GPR COPY was being lowered to two MOVr without CC. This
patch puts the CC back.

My test is a reduction of the case where I encountered the issue,
64-bit atomics use paired GPRs.

The issue only occurs with selectionDAG, FastISel doesn't encounter it
so I didn't bother calling it.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186226 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-12 23:33:03 +00:00
Benjamin Kramer
5343cfe5c8 R600: Reapply testcase from r186178, the big endian issue should be fixed by r186196.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186209 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-12 21:54:43 +00:00
Tom Stellard
2a4ac07d21 R600: Remove the fpconst64.ll test which was failing on non-x86 buildbots
I'm guessing the failure had something to do with the double precision
floating point constant used in the test.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186191 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-12 19:29:54 +00:00
Tom Stellard
c9c322cc39 R600/SI: Add support for f64 kernel arguments
Patch by: Niels Ole Salscheider

Reviewed-by: Tom Stellard <thomas.stellard@amd.com>

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186182 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-12 18:15:26 +00:00
Tom Stellard
97781281ca R600/SI: Implement select and compares for SI
Patch by: Niels Ole Salscheider

Reviewed-by: Tom Stellard <thomas.stellard@amd.com>

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186181 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-12 18:15:19 +00:00
Tom Stellard
513fc45629 R600/SI: Add fsqrt pattern for SI
Patch by: Niels Ole Salscheider

Reviewed-by: Tom Stellard <thomas.stellard@amd.com>

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186180 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-12 18:15:13 +00:00
Tom Stellard
d2442c10f9 R600/SI: Add double precision fsub pattern for SI
Patch by: Niels Ole Salscheider

Reviewed-by: Tom Stellard <thomas.stellard@amd.com>

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186179 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-12 18:15:08 +00:00
Tom Stellard
54453c11b4 R600/SI: SI support for 64bit ConstantFP
Patch by: Niels Ole Salscheider

Reviewed-by: Tom Stellard <thomas.stellard@amd.com>

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186178 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-12 18:15:02 +00:00
Tom Stellard
68e1328662 R600/SI: Add initial double precision support for SI
Patch by: Niels Ole Salscheider

Reviewed-by: Tom Stellard <thomas.stellard@amd.com>

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186177 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-12 18:14:56 +00:00
Benjamin Kramer
b619dd5d5b X86: Shrink certain forms of movsx.
In particular:
movsbw %al, %ax   --> cbtw
movswl %ax, %eax  --> cwtl
movslq %eax, %rax --> cltq

According to Intel's manual those have the same performance characteristics but
come with a smaller encoding.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186174 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-12 18:06:44 +00:00
Stephen Lin
fff967358b X86: fold SSE2/AVX2 logical shift by immediate amount into zero vector when possible
Patch by Andrea Di Biagio


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186165 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-12 15:31:36 +00:00
Stephen Lin
55ec2218c4 Start using CHECK-LABEL in some tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186163 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-12 14:54:12 +00:00
Richard Sandiford
566fb9fe3e [SystemZ] Add test missing from r186148
Sigh, twice in two days sorry.  One day I'll remember...


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186150 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-12 09:20:14 +00:00
Richard Sandiford
9bcad42c3a [SystemZ] Optimize sign-extends of vector setccs
Normal (sext (setcc ...)) sequences are optimised into
(select_cc ..., -1, 0) by DAGCombiner::visitSIGN_EXTEND.
However, this is deliberately not done for vectors, and after
vector type legalization we have (sext_inreg (setcc ...)) instead.

I wondered about trying to extend DAGCombiner to handle this case too,
but it seemed to be a loss on some other targets I tried, even those for
which SETCC isn't "legal" and SELECT_CC is.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186149 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-12 09:17:10 +00:00
Richard Sandiford
6cf3cfa0ab [SystemZ] Improve spilling of LGDR and LDGR
If the source of these instructions is spilled we should load the destination.
If the destination is spilled we should store the source.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186147 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-12 08:37:17 +00:00
Charles Davis
ac226bbf45 Target/X86: Add explicit Win64 and System V/x86-64 calling conventions.
Summary:
This patch adds explicit calling convention types for the Win64 and
System V/x86-64 ABIs. This allows code to override the default, and use
the Win64 convention on a target that wants to use SysV (and
vice-versa). This is needed to implement the `ms_abi` and `sysv_abi` GNU
attributes.

Reviewers:

CC:

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186144 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-12 06:02:35 +00:00
Hal Finkel
e2ff00e117 PPC: Add some missing V_SET0 patterns
We had patterns to match v4i32 immAllZerosV -> V_SET0, but not patterns for
v8i16 (which occurs in the test case) or v16i8. The same was true for
V_SETALLONES (so I added the associated patterns for those as well).

Another bug found by llvm-stress.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186108 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-11 17:43:32 +00:00
Hal Finkel
53c86db25b PPCDAGToDAGISel::isRunOfOnes should return false on zero
This fixes a bug (found by csmith) at -O0 where we attempt to create a RLWIMI
with an out-of-range operand. Most uses of the isRunOfOnes function are guarded
by a condition that the value is not zero. This was not true in two places, and
in both places a zero input would result in an out-of-rage MB value (= 32).

To fix this, isRunOfOnes returns false on a zero input (and I've remove one
now-redundant guard).

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186101 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-11 16:31:51 +00:00
Richard Sandiford
67a6b1c40c [SystemZ] Add testcase missing from r186073
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186074 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-11 09:10:38 +00:00
Richard Sandiford
261e2877eb [SystemZ] Use zeroing form of RISBG for shift-and-AND sequences
Extend r186072 to handle shifts and ANDs.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186073 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-11 09:10:09 +00:00
Richard Sandiford
b3cabb44c3 [SystemZ] Use zeroing form of RISBG for some AND sequences
RISBG can handle some ANDs for which no AND IMMEDIATE exists.
It also acts as a three-operand AND for some cases where an
AND IMMEDIATE could be used instead.

It might be worth adding a pass to replace RISBG with AND IMMEDIATE
in cases where the register operands end up being the same and where
AND IMMEDIATE is smaller.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186072 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-11 08:59:12 +00:00
Hal Finkel
838a7fb1a3 RegScavenger should not exclude undef uses
When computing currently-live registers, the register scavenger excludes undef
uses. As a result, undef uses are ignored when computing the restore points of
registers spilled into the emergency slots. While the register scavenger
normally excludes from consideration, when scavenging, registers used by the
current instruction, we need to not exclude undef uses. Otherwise, we might end
up requiring more emergency spill slots than we have (in the case where the
undef use *is* the currently-spilled register).

Another bug found by llvm-stress.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186067 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-11 05:55:57 +00:00
Hal Finkel
ce9681422a Move r186044 tests into CodeGen/X86
I had thought that these tests could be target-neutral, but in practice this is
not the case (on some targets, like Hexagon and Darwin), they trigger an assert
(a different assert than the one that r186044 fixes).

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186051 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-11 01:55:55 +00:00
Michel Danzer
a3e39dc705 R600/SI: Initial local memory support
Enough for the radeonsi driver to use it for calculating derivatives.

Reviewed-by: Tom Stellard <thomas.stellard@amd.com>

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186012 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-10 16:37:07 +00:00
Michel Danzer
0a9e22b863 R600/SI: Add intrinsic for retrieving the current thread ID
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186010 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-10 16:36:52 +00:00
Michel Danzer
0a9aaacd72 R600/SI: Add intrinsics for texture sampling with user derivatives
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186008 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-10 16:36:36 +00:00
Jim Grosbach
97c37bb4d4 ARM: Fix incorrect pack pattern for thumb2
Propagate the fix from r185712 to Thumb2 codegen as well. Original
commit message applies here as well:

A "pkhtb x, x, y asr #num" uses the lower 16 bits of "y asr #num" and
packs them in the bottom half of "x". An arithmetic and logic shift are
only equivalent in this context if the shift amount is 16. We would be
shifting in ones into the bottom 16bits instead of zeros if "y" is
negative.

rdar://14338767

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185982 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-09 22:59:22 +00:00
Adrian Prantl
e4e742a62d move test into the appropriate subdir.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185972 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-09 21:44:11 +00:00
Adrian Prantl
3517640443 Reapply an improved version of r180816/180817.
Change the informal convention of DBG_VALUE machine instructions so that
we can express a register-indirect address with an offset of 0.
The old convention was that a DBG_VALUE is a register-indirect value if
the offset (operand 1) is nonzero. The new convention is that a DBG_VALUE
is register-indirect if the first operand is a register and the second
operand is an immediate. For plain register values the combination reg,
reg is used. MachineInstrBuilder::BuildMI knows how to build the new
DBG_VALUES.

rdar://problem/13658587

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185966 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-09 20:28:37 +00:00
Stephen Lin
ddd536085c Appease buildbots after r185956: just set -mcpu explicitly, as it should have been from the beginning.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185962 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-09 19:27:10 +00:00
Stephen Lin
1a2b2481ee Appease Atom buildbot after r185956 (explicitly turn on AVX)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185961 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-09 18:55:52 +00:00
Hal Finkel
b9c8c40acb WidenVecRes_BUILD_VECTOR must use the first operand's type
Because integer BUILD_VECTOR operands may have a larger type than the result's
vector element type, and all operands must have the same type, when widening a
BUILD_VECTOR node by adding UNDEFs, we cannot use the vector element type, but
rather must use the type of the existing operands.

Another bug found by llvm-stress.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185960 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-09 18:55:10 +00:00
Bill Schmidt
7c2d8f7b5e [PowerPC] Better fix for PR16556.
A more complete example of the bug in PR16556 was recently provided,
showing that the previous fix was not sufficient.  The previous fix is
reverted herein.

The real problem is that ReplaceNodeResults() uses LowerFP_TO_INT as
custom lowering for FP_TO_SINT during type legalization, without
checking whether the input type is handled by that routine.
LowerFP_TO_INT requires the input to be f32 or f64, so we fail when
the input is ppcf128.

I'm leaving the test case from the initial fix (r185821) in place, and
adding the new test as another crash-only check.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185959 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-09 18:50:20 +00:00
Stephen Lin
36f6df78ad Attempt to appease buildbot after r185956 by explicitly turning setting -fma,-fma4 attrs (I'm assuming they're set because the bot is running on machine that has one or the other.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185958 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-09 18:41:43 +00:00
Stephen Lin
e54885af9b AArch64/PowerPC/SystemZ/X86: This patch fixes the interface, usage, and all
in-tree implementations of TargetLoweringBase::isFMAFasterThanMulAndAdd in
order to resolve the following issues with fmuladd (i.e. optional FMA)
intrinsics:

1. On X86(-64) targets, ISD::FMA nodes are formed when lowering fmuladd
intrinsics even if the subtarget does not support FMA instructions, leading
to laughably bad code generation in some situations.

2. On AArch64 targets, ISD::FMA nodes are formed for operations on fp128,
resulting in a call to a software fp128 FMA implementation.

3. On PowerPC targets, FMAs are not generated from fmuladd intrinsics on types
like v2f32, v8f32, v4f64, etc., even though they promote, split, scalarize,
etc. to types that support hardware FMAs.

The function has also been slightly renamed for consistency and to force a
merge/build conflict for any out-of-tree target implementing it. To resolve,
see comments and fixed in-tree examples.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185956 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-09 18:16:56 +00:00