Follow up to r217138, extending the logic to other NEON-immediate instructions.
As before, the instruction already performs the correct operation and we're
just using a different type for convenience, so we want a true nop-cast.
Patch by Asiri Rathnayake.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217159 91177308-0d34-0410-b5e6-96231b3b80d8
We were materialising big-endian constants using DAG nodes with types different
from what was requested, followed by a bitcast. This is fine on little-endian
machines where bitcasting is a nop, but we need a slightly different
representation for big-endian. This adds a new set of NVCAST (natural-vector
cast) operations which are always nops.
Patch by Asiri Rathnayake.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217138 91177308-0d34-0410-b5e6-96231b3b80d8
This teaches the AArch64 backend to deal with the operations required
to deal with the operations on v4f16 and v8f16 which are exposed by
NEON intrinsics, plus the add, sub, mul and div operations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216555 91177308-0d34-0410-b5e6-96231b3b80d8
This makes the first stage DAG for @llvm.convert.to.fp16 an fptrunc,
and correspondingly @llvm.convert.from.fp16 an fpext. The legalisation
path is now uniform, regardless of the input IR:
fptrunc -> FP_TO_FP16 (if f16 illegal) -> libcall
fpext -> FP16_TO_FP (if f16 illegal) -> libcall
Each target should be able to select the version that best matches its
operations and not be required to duplicate patterns for both fptrunc
and FP_TO_FP16 (for example).
As a result we can remove some redundant AArch64 patterns.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213507 91177308-0d34-0410-b5e6-96231b3b80d8
This makes the two intrinsics @llvm.convert.from.f16 and
@llvm.convert.to.f16 accept types other than simple "float". This is
only strictly needed for the truncate operation, since otherwise
double rounding occurs and there's no way to represent the strict IEEE
conversion. However, for symmetry we allow larger types in the extend
too.
During legalization, we can expand an "fp16_to_double" operation into
two extends for convenience, but abort when the truncate isn't legal. A new
libcall is probably needed here.
Even after this commit, various target tweaks are needed to actually use the
extended intrinsics. I've put these into separate commits for clarity, so there
are no actual tests of f64 conversion here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213248 91177308-0d34-0410-b5e6-96231b3b80d8
Memory barrier __builtin_arm_[dmb, dsb, isb] intrinsics are required to
implement their corresponding ACLE and MSVC intrinsics.
This patch ports ARM dmb, dsb, isb intrinsic to AArch64.
Differential Revision: http://reviews.llvm.org/D4520
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213247 91177308-0d34-0410-b5e6-96231b3b80d8
Sufficiently twisted use of TableGen lets us write patterns directly for f16
(as an i16 promoted to i32) -> f32 conversion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212933 91177308-0d34-0410-b5e6-96231b3b80d8
This patch teaches the AsmParser to accept some logical+immediate
instructions and convert them as shown:
bic Rd, Rn, #imm -> and Rd, Rn, #~imm
bics Rd, Rn, #imm -> ands Rd, Rn, #~imm
orn Rd, Rn, #imm -> orr Rd, Rn, #~imm
eon Rd, Rn, #imm -> eor Rd, Rn, #~imm
Those instructions are an alternate syntax available to assembly coders,
and are needed in order to support code already compiling with some other
assemblers. For example, the bic construct is used by the linux kernel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212722 91177308-0d34-0410-b5e6-96231b3b80d8
Storing will generally be immediately preceded by rounding from an f32
or f64, so make sure to match those patterns directly to convert into the
FPR16 register class directly rather than going through the integer GPRs.
This also eliminates an extra step in the convert-from-f64 path
which was first converting to f32 and then to f16 from there.
rdar://17594379
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212638 91177308-0d34-0410-b5e6-96231b3b80d8
Loading will generally extend to an f32 or an 64, so make sure
to match those patterns directly to load into the FPR16 register
class directly rather than going through the integer GPRs.
This also eliminates an extra step in the convert-to-f64 path
which was first converting to f32 and then to f64 from there.
rdar://17594379
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212573 91177308-0d34-0410-b5e6-96231b3b80d8
Define an intrinsic for the frontend to use and pattern match it to
the RBIT instruction.
rdar://9283021
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211058 91177308-0d34-0410-b5e6-96231b3b80d8
This commit starts with a "git mv ARM64 AArch64" and continues out
from there, renaming the C++ classes, intrinsics, and other
target-local objects for consistency.
"ARM64" test directories are also moved, and tests that began their
life in ARM64 use an arm64 triple, those from AArch64 use an aarch64
triple. Both should be equivalent though.
This finishes the AArch64 merge, and everyone should feel free to
continue committing as normal now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209577 91177308-0d34-0410-b5e6-96231b3b80d8
I'm doing this in two phases for a better "git blame" record. This
commit removes the previous AArch64 backend and redirects all
functionality to ARM64. It also deduplicates test-lines and removes
orphaned AArch64 tests.
The next step will be "git mv ARM64 AArch64" and rewire most of the
tests.
Hopefully LLVM is still functional, though it would be even better if
no-one ever had to care because the rename happens straight
afterwards.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209576 91177308-0d34-0410-b5e6-96231b3b80d8
This alias appears not to have an appropriate PrintMethod. Normally, I'd look
into it, but since AArch64 is disappearing soon it's probably not worth it.
This will be tested when the TableGen "should I print this Alias" heuristic is
fixed (very soon).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208967 91177308-0d34-0410-b5e6-96231b3b80d8
Actually, MOV sometimes is canonical, but for now this is a better
approximation than what's there.
This will be tested when the TableGen "should I print this Alias" heuristic is
fixed (very soon).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208962 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, only regular AArch64 instructions were annotated with SchedRW lists.
This patch does the same for NEON enabling these instructions to be scheduled by
the MIScheduler. Additionally, store operations are now modeled and a few
SchedRW lists were updated for bug fixes (e.g. multiple def operands).
Reviewers: apazos, mcrosier, atrick
Patch by Dave Estes <cestes@codeaurora.org>!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204505 91177308-0d34-0410-b5e6-96231b3b80d8
Only one instruction pair needed changing: SMULH & UMULH. The previous
code worked, but MC was doing extra work treating Ra as a valid
operand (which then got completely overwritten in MCCodeEmitter).
No behaviour change, so no tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203772 91177308-0d34-0410-b5e6-96231b3b80d8
for the Cortex-A53 subtarget in the AArch64 backend.
This patch lays the ground work to annotate each AArch64 instruction
(no NEON yet) with a list of SchedReadWrite types. The patch also
provides the Cortex-A53 processor resources, maps those the the default
SchedReadWrites, and provides basic latency. NEON support will be added
in a subsequent patch with proper forwarding logic.
Verification was done by setting the pre-RA scheduler to linearize to
better gauge the effect of the MIScheduler. Even without modeling the
forward logic, the results show a modest improvement for Cortex-A53.
Reviewers: apazos, mcrosier, atrick
Patch by Dave Estes <cestes@codeaurora.org>!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203125 91177308-0d34-0410-b5e6-96231b3b80d8
for the Cortex-A53 subtarget in the AArch64 backend.
This patch lays the ground work to annotate each AArch64 instruction
(no NEON yet) with a list of SchedReadWrite types. The patch also
provides the Cortex-A53 processor resources, maps those the the default
SchedReadWrites, and provides basic latency. NEON support will be added
in a subsequent patch with proper forwarding logic.
Verification was done by setting the pre-RA scheduler to linearize to
better gauge the effect of the MIScheduler. Even without modeling the
forward logic, the results show a modest improvement for Cortex-A53.
Reviewers: apazos, mcrosier, atrick
Patch by Dave Estes <cestes@codeaurora.org>!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202767 91177308-0d34-0410-b5e6-96231b3b80d8
Check for single use of fmul node in fused multiply patterns
to allow generation of fused multiply add/sub instructions.
Otherwise fmul operation ends up being repeated more than
once which does not help peformance on targets with
only one MAC unit, as for example cortex-a53.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197929 91177308-0d34-0410-b5e6-96231b3b80d8
The correct pattern matching should be:
- fnmadd is (-Ra) + (-Rn)*Rm which should be matched as:
fma (fneg node:$Rn), node:$Rm, (fneg node:$Ra) and as
(f32 (fsub (f32 (fneg FPR32:$Ra)), (f32 (fmul FPR32:$Rn, FPR32:$Rm))))
- fnmsub is (-Ra) + Rn*Rm which should be matched as
fma node:$Rn, node:$Rm, (fneg node:$Ra) and as
(f32 (fsub (f32 (fmul FPR32:$Rn, FPR32:$Rm)), FPR32:$Ra))))
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197928 91177308-0d34-0410-b5e6-96231b3b80d8
copy in MC layer. Added the MC layer tests. Fixed triple setting in test cases.
Patch by Ana Pazos <apazos@codeaurora.org>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194501 91177308-0d34-0410-b5e6-96231b3b80d8
This adds a new subtarget feature called FPARMv8 (implied by NEON), and
predicates the support of the FP instructions and registers on this feature.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193739 91177308-0d34-0410-b5e6-96231b3b80d8
Patch by Ana Pazos.
1.Added support for v1ix and v1fx types.
2.Added Scalar Pairwise Reduce instructions.
3.Added initial implementation of Scalar Arithmetic instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191263 91177308-0d34-0410-b5e6-96231b3b80d8
Previously we modelled VPR128 and VPR64 as essentially identical
register-classes containing V0-V31 (which had Q0-Q31 as "sub_alias"
sub-registers). This model is starting to cause significant problems
for code generation, particularly writing EXTRACT/INSERT_SUBREG
patterns for converting between the two.
The change here switches to classifying VPR64 & VPR128 as
RegisterOperands, which are essentially aliases for RegisterClasses
with different parsing and printing behaviour. This fits almost
exactly with their real status (VPR128 == FPR128 printed strangely,
VPR64 == FPR64 printed strangely).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190665 91177308-0d34-0410-b5e6-96231b3b80d8
Patch by Ana Pazos.
- Completed implementation of instruction formats:
AdvSIMD three same
AdvSIMD modified immediate
AdvSIMD scalar pairwise
- Completed implementation of instruction classes
(some of the instructions in these classes
belong to yet unfinished instruction formats):
Vector Arithmetic
Vector Immediate
Vector Pairwise Arithmetic
- Initial implementation of instruction formats:
AdvSIMD scalar two-reg misc
AdvSIMD scalar three same
- Intial implementation of instruction class:
Scalar Arithmetic
- Initial clang changes to support arm v8 intrinsics.
Note: no clang changes for scalar intrinsics function name mangling yet.
- Comprehensive test cases for added instructions
To verify auto codegen, encoding, decoding, diagnosis, intrinsics.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187567 91177308-0d34-0410-b5e6-96231b3b80d8
According to the AArch64 ELF specification (4.6.8), it's the
assembler's responsibility to make sure the shift amount is correct in
relocated MOVZ/MOVK instructions.
This wasn't being obeyed by either the MCJIT CodeGen or RuntimeDyldELF
(which happened to work out well for JIT tests). This commit should
make us compliant in this area.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185360 91177308-0d34-0410-b5e6-96231b3b80d8
The MOVZ/MOVK instruction sequence may not be the most efficient (a
literal-pool load could be better) but adding that would require
reinstating the ConstantIslands pass.
For now the sequence is correct, and that's enough. Beware, as of
commit GNU ld does not appear to support the relocations needed for
this. Its primary purpose (for now) will be to support JITed code,
since in that case there is no guarantee of where your code will end
up in memory relative to external symbols it references.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181117 91177308-0d34-0410-b5e6-96231b3b80d8
I've managed to convince myself that AArch64's acquire/release
instructions are sufficient to guarantee C++11's required semantics,
even in the sequentially-consistent case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179005 91177308-0d34-0410-b5e6-96231b3b80d8
It's a bit of churn in the blame log, but I think there are real benefits to
the newer system so I'm making the change in one go.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178633 91177308-0d34-0410-b5e6-96231b3b80d8
The work done by the post-encoder (setting architecturally unused bits to 0 as
required) can be done by the existing operand that covers the "#0.0". This
removes at least one use of the discouraged PostEncoderMethod uses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176261 91177308-0d34-0410-b5e6-96231b3b80d8
This implements the review suggestion to simplify the AArch64 backend. If we
later discover that we *really* need the extra complexity of the
ConstantIslands pass for performance reasons it can be resurrected.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175258 91177308-0d34-0410-b5e6-96231b3b80d8
This gives a DiagnosticType to all AsmOperands in sight. This replaces all
"invalid operand" diagnostics with something more specific. The messages given
should still be sufficiently vague that they're not usually actively misleading
when LLVM guesses your instruction incorrectly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174871 91177308-0d34-0410-b5e6-96231b3b80d8
Weakly defined symbols should evaluate to 0 if they're undefined at
link-time. This is impossible to do with the usual address generation
patterns, so we should use a literal pool entry to materlialise the
address.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174518 91177308-0d34-0410-b5e6-96231b3b80d8
These instructions are a late addition to the architecture, and may
yet end up behind an optional attribute, but for now they're available
at all times.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174496 91177308-0d34-0410-b5e6-96231b3b80d8
