define below all header includes in the lib/CodeGen/... tree. While the
current modules implementation doesn't check for this kind of ODR
violation yet, it is likely to grow support for it in the future. It
also removes one layer of macro pollution across all the included
headers.
Other sub-trees will follow.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206837 91177308-0d34-0410-b5e6-96231b3b80d8
operator* on the by-operand iterators to return a MachineOperand& rather than
a MachineInstr&. At this point they almost behave like normal iterators!
Again, this requires making some existing loops more verbose, but should pave
the way for the big range-based for-loop cleanups in the future.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203865 91177308-0d34-0410-b5e6-96231b3b80d8
The function with uwtable attribute might be visited by the
stack unwinder, thus the link register should be considered
as clobbered after the execution of the branch and link
instruction (i.e. the definition of the machine instruction
can't be ignored) even when the callee function are marked
with noreturn.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202165 91177308-0d34-0410-b5e6-96231b3b80d8
The aim in this patch is to reduce work that VirtRegRewriter needs to do when
telling MachineRegisterInfo which physregs are in use. Up until now
VirtRegRewriter::rewrite has been doing rewriting and populating def info and
then proceeding to set whether a physreg is used based this info for every
physreg that the target provides. This can be expensive when a target has an
unusually high number of supported physregs, and is a noticeable chunk of
compile time for small programs on such targets.
So to reduce compile time, this patch simply adds the use of a SparseSet to the
rewrite function that is used to flag each physreg that is encountered in a
MachineFunction. Afterward, rather than iterating over the set of all physregs
for a given target to set the physregs used in MachineRegisterInfo, the new way
is to iterate over the set of physregs that were actually encountered and set
in the SparseSet. This improves compile time because the existing rewrite
function was iterating over all MachineOperands already, and because the
iterations afterward to setPhysRegUsed is reduced by use of the SparseSet data.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200919 91177308-0d34-0410-b5e6-96231b3b80d8
isPhysRegUsed if the unwind information is required.
Indeed, the runtime may need a correct stack to be able to unwind the call.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194271 91177308-0d34-0410-b5e6-96231b3b80d8
PEI inserts a save/restore sequence for the link register, according to the
information it gets from the MachineRegisterInfo.
MachineRegisterInfo is populated by the VirtRegMap pass.
This pass was not aware of noreturn calls and was registering the definitions of
these calls the same way as regular operations.
Modify VirtRegPass so that it does not set the isPhysRegUsed information for
registers only defined by noreturn calls.
The rational is that a noreturn call is the "last instruction" of the program
(if it returns the behavior is undefined), so everything that is defined by it
cannot be used and will not interfere with anything else. Therefore, it is
pointless to account for then.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191349 91177308-0d34-0410-b5e6-96231b3b80d8
Now that there can be multiple hint registers from targets, it doesn't
make sense to have a function that returns 'the' preferred register.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169190 91177308-0d34-0410-b5e6-96231b3b80d8
Targets can provide multiple hints now, so getRegAllocPref() doesn't
make sense any longer because it only returns one preferred register.
Replace it with getSimpleHint() in the remaining heuristics. This
function only
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169188 91177308-0d34-0410-b5e6-96231b3b80d8
Virtual registers with a known preferred register are prioritized by
RAGreedy. This function makes the condition explicit without depending
on getRegAllocPref().
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169179 91177308-0d34-0410-b5e6-96231b3b80d8
Sooooo many of these had incorrect or strange main module includes.
I have manually inspected all of these, and fixed the main module
include to be the nearest plausible thing I could find. If you own or
care about any of these source files, I encourage you to take some time
and check that these edits were sensible. I can't have broken anything
(I strictly added headers, and reordered them, never removed), but they
may not be the headers you'd really like to identify as containing the
API being implemented.
Many forward declarations and missing includes were added to a header
files to allow them to parse cleanly when included first. The main
module rule does in fact have its merits. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169131 91177308-0d34-0410-b5e6-96231b3b80d8
No functional change, just moved header files.
Targets can inject custom passes between register allocation and
rewriting. This makes it possible to tweak the register allocation
before rewriting, using the full global interference checking available
from LiveRegMatrix.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168806 91177308-0d34-0410-b5e6-96231b3b80d8
Using the cached bit vector in MRI avoids comstantly allocating and
recomputing the reserved register bit vector.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165983 91177308-0d34-0410-b5e6-96231b3b80d8
because LiveStackAnalysis was not preserved by VirtRegWriter. This caused
big stack usage regression in some cases.
rdar://12340383
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164408 91177308-0d34-0410-b5e6-96231b3b80d8
We will soon allow virtual register live ranges to overlap regunit live
ranges when the physreg is defined as a copy of the virtreg:
%EAX = COPY %vreg5
FOO %vreg5
BAR %EAX<kill>
There is no real interference since %vreg5 and %EAX have the same value
where they overlap.
This patch prevents addKillFlags from adding virtreg kill flags to FOO
where the assigned physreg is overlapping the virtual register live
range.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163335 91177308-0d34-0410-b5e6-96231b3b80d8
This deduplicates some code from the optimizing register allocators, and
it means that it is now possible to change the register allocators'
solutions simply by editing the VirtRegMap between the register
allocator pass and the rewriter.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158249 91177308-0d34-0410-b5e6-96231b3b80d8
OK, not really. We don't want to reintroduce the old rewriter hacks.
This patch extracts virtual register rewriting as a separate pass that
runs after the register allocator. This is possible now that
CodeGen/Passes.cpp can configure the full optimizing register allocator
pipeline.
The rewriter pass uses register assignments in VirtRegMap to rewrite
virtual registers to physical registers, and it inserts kill flags based
on live intervals.
These finalization steps are the same for the optimizing register
allocators: RABasic, RAGreedy, and PBQP.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158244 91177308-0d34-0410-b5e6-96231b3b80d8
MRI keeps track of which physregs have been used. Make sure it gets
updated with all the regmask-clobbered registers.
Delete the closePhysRegsUsed() function which isn't necessary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@150830 91177308-0d34-0410-b5e6-96231b3b80d8
This can only happen if the set of reserved registers changes during
register allocation.
<rdar://problem/10625436>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147486 91177308-0d34-0410-b5e6-96231b3b80d8
Most of this stuff was supporting the old deferred spill code insertion
mechanism. Modern spillers just edit machine code in place.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144484 91177308-0d34-0410-b5e6-96231b3b80d8
For example:
%vreg10:dsub_0<def,undef> = COPY %vreg1
%vreg10:dsub_1<def> = COPY %vreg2
is rewritten as:
%D2<def> = COPY %D0, %Q1<imp-def>
%D3<def> = COPY %D1, %Q1<imp-use,kill>, %Q1<imp-def>
The first COPY doesn't care about the previous value of %Q1, so it
doesn't read that register.
The second COPY is a partial redefinition of %Q1, so it implicitly kills
and redefines that register.
This makes it possible to recognize instructions that can harmlessly
clobber the full super-register. The write and don't read the
super-register.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141139 91177308-0d34-0410-b5e6-96231b3b80d8
We cannot rely on the <imp-def> operands added by LiveIntervals in all cases as
demonstrated by the test case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@130313 91177308-0d34-0410-b5e6-96231b3b80d8
Turn them into noop KILL instructions instead. This lets the scavenger know when
super-registers are killed and defined.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128645 91177308-0d34-0410-b5e6-96231b3b80d8
The rewriter works almost identically to -rewriter=trivial, except it also
eliminates any identity copies.
This makes the new register allocators independent of VirtRegRewriter.cpp which
will be going away at the same time as RegAllocLinearScan.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125967 91177308-0d34-0410-b5e6-96231b3b80d8
These functions not longer assert when passed 0, but simply return false instead.
No functional change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123155 91177308-0d34-0410-b5e6-96231b3b80d8
when no virtual registers have been allocated.
It was only used to resize IndexedMaps, so provide an IndexedMap::resize()
method such that
Map.grow(MRI.getLastVirtReg());
can be replaced with the simpler
Map.resize(MRI.getNumVirtRegs());
This works correctly when no virtuals are allocated, and it bypasses the to/from
index conversions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123130 91177308-0d34-0410-b5e6-96231b3b80d8
Print virtual registers numbered from 0 instead of the arbitrary
FirstVirtualRegister. The first virtual register is printed as %vreg0.
TRI::NoRegister is printed as %noreg.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123107 91177308-0d34-0410-b5e6-96231b3b80d8
depending on TRI::FirstVirtualRegister.
Also use TRI::printReg instead of printing virtual registers directly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123101 91177308-0d34-0410-b5e6-96231b3b80d8
Use amazing new function call technology instead of writing identical code in
multiple places.
This fixes PR8604.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119306 91177308-0d34-0410-b5e6-96231b3b80d8
The PowerPC floating point registers can represent both f32 and f64 via the
two register classes F4RC and F8RC. F8RC is considered a subclass of F4RC to
allow cross-class coalescing. This coalescing only affects whether registers
are spilled as f32 or f64.
Spill slots must be accessed with load/store instructions corresponding to the
class of the spilled register. PPCInstrInfo::foldMemoryOperandImpl was looking
at the instruction opcode which is wrong.
X86 has similar floating point register classes, but doesn't try to fold
memory operands, so there is no problem there.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97262 91177308-0d34-0410-b5e6-96231b3b80d8
slots. The AsmPrinter will use this information to determine whether to
print a spill/reload comment.
Remove default argument values. It's too easy to pass a wrong argument
value when multiple arguments have default values. Make everything
explicit to trap bugs early.
Update all targets to adhere to the new interfaces..
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@87022 91177308-0d34-0410-b5e6-96231b3b80d8
This introduces a new pass, SlotIndexes, which is responsible for numbering
instructions for register allocation (and other clients). SlotIndexes numbering
is designed to match the existing scheme, so this patch should not cause any
changes in the generated code.
For consistency, and to avoid naming confusion, LiveIndex has been renamed
SlotIndex.
The processImplicitDefs method of the LiveIntervals analysis has been moved
into its own pass so that it can be run prior to SlotIndexes. This was
necessary to match the existing numbering scheme.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@85979 91177308-0d34-0410-b5e6-96231b3b80d8
