The normal tBX instruction is predicable, so there's no reason the
pseudos for using it as a return shouldn't be. Gives us some nice code-gen
improvements as can be seen by the test changes. In particular, several
tests now have to disable if-conversion because it works too well and defeats
the test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134746 91177308-0d34-0410-b5e6-96231b3b80d8
makes one of the tests actually mean something (as the string 'add' will
always appear in the output of this file).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134358 91177308-0d34-0410-b5e6-96231b3b80d8
The DSP instructions in the Thumb2 instruction set are an optional extension
in the Cortex-M* archtitecture. When present, the implementation is considered
an "ARMv7E-M implementation," and when not, an "ARMv7-M implementation."
Add a subtarget feature hook for the v7e-m instructions and hook it up. The
cortex-m3 cpu is an example of a v7m implementation, while the cortex-m4 is
a v7e-m implementation.
rdar://9572992
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134261 91177308-0d34-0410-b5e6-96231b3b80d8
Fix a FIXME and allow predication (in Thumb2) for the T1 register to
register MOV instructions. This allows some better codegen with
if-conversion (as seen in the test updates), plus it lays the groundwork
for pseudo-izing the tMOVCC instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134197 91177308-0d34-0410-b5e6-96231b3b80d8
It's just a t2LDMIA_UPD instruction with extra codegen properties, so it
doesn't need the encoding information. As a side-benefit, we now correctly
recognize for instruction printing as a 'pop' instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134173 91177308-0d34-0410-b5e6-96231b3b80d8
for pre-2.9 bitcode files. We keep x86 unaligned loads, movnt, crc32, and the
target indep prefetch change.
As usual, updating the testsuite is a PITA.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133337 91177308-0d34-0410-b5e6-96231b3b80d8
we try to branch to them.
Before we were creating successor lists with duplicated entries. Fixing that
found a bug in isBlockOnlyReachableByFallthrough that would causes it to
return the wrong answer for
-----------
...
jne foo
jmp bar
foo:
----------
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132882 91177308-0d34-0410-b5e6-96231b3b80d8
of reserved registers.
Use RegisterClassInfo in RABasic as well. This slightly changes som
allocation orders because RegisterClassInfo puts CSR aliases last.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132581 91177308-0d34-0410-b5e6-96231b3b80d8
by non-CMP expressions. The executable test case (129821) would test
this as well, if we had an "-O0 -disable-arm-fast-isel" LLVM-GCC
tester. Alas, the ARM assembly would be very difficult to check with
FileCheck.
The thumb2-cbnz.ll test is affected; it generates larger code (tst.w
vs. cmp #0), but I believe the new version is correct.
rdar://problem/9298790
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@131261 91177308-0d34-0410-b5e6-96231b3b80d8
Original message:
Teach MachineCSE how to do simple cross-block CSE involving physregs. This allows, for example, eliminating duplicate cmpl's on x86. Part of rdar://problem/8259436 .
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@130877 91177308-0d34-0410-b5e6-96231b3b80d8
These tests all follow the same pattern:
mov r2, r0
movs r0, #0
$CMP r2, r1
it eq
moveq r0, #1
bx lr
The first 'mov' can be eliminated by rematerializing 'movs r0, #0' below the
test instruction:
$CMP r0, r1
mov.w r0, #0
it eq
moveq r0, #1
bx lr
So far, only physreg coalescing can do that. The register allocators won't yet
split live ranges just to eliminate copies. They can learn, but this particular
problem is not likely to show up in real code. It only appears because r0 is
used for both the function argument and return value.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@130858 91177308-0d34-0410-b5e6-96231b3b80d8
more callee-saved registers and introduce copies. Only allows it if scheduling
a node above calls would end up lessen register pressure.
Call operands also has added ABI restrictions for register allocation, so be
extra careful with hoisting them above calls.
rdar://9329627
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@130245 91177308-0d34-0410-b5e6-96231b3b80d8
Fixes Thumb2 ADCS and SBCS lowering: <rdar://problem/9275821>.
t2ADCS/t2SBCS are now pseudo instructions, consistent with ARM, so the
assembly printer correctly prints the 's' suffix.
Fixes Thumb2 adde -> SBC matching to check for live/dead carry flags.
Fixes the internal ARM machine opcode mnemonic for ADCS/SBCS.
Fixes ARM SBC lowering to check for live carry (potential bug).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@130048 91177308-0d34-0410-b5e6-96231b3b80d8
add <rd>, sp, #<imm8>
ldr <rd>, [sp, #<imm8>]
When the offset from sp is multiple of 4 and in range of 0-1020.
This saves code size by utilizing 16-bit instructions.
rdar://9321541
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129971 91177308-0d34-0410-b5e6-96231b3b80d8
Additional fixes:
Do something reasonable for subtargets with generic
itineraries by handle node latency the same as for an empty
itinerary. Now nodes default to unit latency unless an itinerary
explicitly specifies a zero cycle stage or it is a TokenFactor chain.
Original fixes:
UnitsSharePred was a source of randomness in the scheduler: node
priority depended on the queue data structure. I rewrote the recent
VRegCycle heuristics to completely replace the old heuristic without
any randomness. To make the ndoe latency adjustments work, I also
needed to do something a little more reasonable with TokenFactor. I
gave it zero latency to its consumers and always schedule it as low as
possible.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129421 91177308-0d34-0410-b5e6-96231b3b80d8
masks to match inversely for the code as is to work. For the example given
we actually want:
bfi r0, r2, #1, #1
not #0, however, given the way the pattern is written it's not possible
at the moment.
Fixes rdar://9177502
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128320 91177308-0d34-0410-b5e6-96231b3b80d8
Optimize trivial branches in CodeGenPrepare, which often get created from the
lowering of objectsize intrinsics. Unfortunately, a number of tests were relying
on llc not optimizing trivial branches, so I had to add an option to allow them
to continue to test what they originally tested.
This fixes <rdar://problem/8785296> and <rdar://problem/9112893>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127498 91177308-0d34-0410-b5e6-96231b3b80d8
lowering of objectsize intrinsics. Unfortunately, a number of tests were relying
on llc not optimizing trivial branches, so I had to add an option to allow them
to continue to test what they originally tested.
This fixes <rdar://problem/8785296> and <rdar://problem/9112893>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127459 91177308-0d34-0410-b5e6-96231b3b80d8
1. Fixed ARM pc adjustment.
2. Fixed dynamic-no-pic codegen
3. CSE of pc-relative load of global addresses.
It's now enabled by default for Darwin.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123991 91177308-0d34-0410-b5e6-96231b3b80d8
DAG. Disable using "-disable-sched-cycles".
For ARM, this enables a framework for modeling the cpu pipeline and
counting stalls. It also activates several heuristics to drive
scheduling based on the model. Scheduling is inherently imprecise at
this stage, and until spilling is improved it may defeat attempts to
schedule. However, this framework provides greater control over
tuning codegen.
Although the flag is not target-specific, it should have very little
affect on the default scheduler used by x86. The only two changes that
affect x86 are:
- scheduling a high-latency operation bumps the current cycle so independent
operations can have their latency covered. i.e. two independent 4
cycle operations can produce results in 4 cycles, not 8 cycles.
- Two operations with equal register pressure impact and no
latency-based stalls on their uses will be prioritized by depth before height
(height is irrelevant if no stalls occur in the schedule below this point).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123971 91177308-0d34-0410-b5e6-96231b3b80d8
Also fix an off-by-one in SelectionDAGBuilder that was preventing shuffle
vectors from being translated to EXTRACT_SUBVECTOR.
Patch by Tim Northover.
The test changes are needed to keep those spill-q tests from testing aligned
spills and restores. If the only aligned stack objects are spill slots, we
no longer realign the stack frame. Prior to this patch, an EXTRACT_SUBVECTOR
was legalized by loading from the stack, which created an aligned frame index.
Now, however, there is nothing except the spill slot in the stack frame, so
I added an aligned alloca.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122995 91177308-0d34-0410-b5e6-96231b3b80d8
Use the same COPY_TO_REGCLASS approach as for the 2-register *_sfp instructions.
This change made a big difference in the code generated for the
CodeGen/Thumb2/cross-rc-coalescing-2.ll test: The coalescer is still doing
a fine job, but some instructions that were previously moved outside the loop
are not moved now. It's using fewer VFP registers now, which is generally
a good thing, so I think the estimates for register pressure changed and that
affected the LICM behavior. Since that isn't obviously wrong, I've just
changed the test file. This completes the work for Radar 8711675.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121730 91177308-0d34-0410-b5e6-96231b3b80d8
Otherwise, a plain str/ldr should be used instead. Make sure we account for
that in prologue/epilogue code generation.
rdar://8745460
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121391 91177308-0d34-0410-b5e6-96231b3b80d8
