This has undefined behavior, because the classof implementation attempts to
access parts of the not-yet-constructed derived class. Found by clang
-fsanitize=vptr.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170658 91177308-0d34-0410-b5e6-96231b3b80d8
these patches are tested a lot by test-suite but
make check tests are forthcoming once the next
few patches that complete this are committed.
with the next few patches the pass rate for mips16 is
near 100%
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170656 91177308-0d34-0410-b5e6-96231b3b80d8
physical register $r1 to $r0.
GNU disassembler recognizes an "or" instruction as a "move", and this change
makes the disassembled code easier to read.
Original patch by Reed Kotler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170655 91177308-0d34-0410-b5e6-96231b3b80d8
behavior and violates the !range constraints we put on loads of this enum.
Found by clang -fsanitize=enum.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170653 91177308-0d34-0410-b5e6-96231b3b80d8
MC disassembler clients (LLDB) are interested in querying if an
instruction may affect control flow other than by virtue of being
an explicit branch instruction. For example, instructions which
write directly to the PC on some architectures.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170610 91177308-0d34-0410-b5e6-96231b3b80d8
Unlike SGPRs VGPRs doesn't need to be aligned.
Patch by: Christian König
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Christian König <deathsimple@vodafone.de>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170593 91177308-0d34-0410-b5e6-96231b3b80d8
Branch if we have enough instructions so that it makes sense.
Also remove branches if they don't make sense.
Patch by: Christian König
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Christian König <deathsimple@vodafone.de>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170592 91177308-0d34-0410-b5e6-96231b3b80d8
This patch replaces the control flow handling with a new
pass which structurize the graph before transforming it to
machine instruction. This has a couple of different advantages
and currently fixes 20 piglit tests without a single regression.
It is now a general purpose transformation that could be not
only be used for SI/R6xx, but also for other hardware
implementations that use a form of structurized control flow.
v2: further cleanup, fixes and documentation
Patch by: Christian König
Signed-off-by: Christian König <deathsimple@vodafone.de>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170591 91177308-0d34-0410-b5e6-96231b3b80d8
Use the version that also takes an MF reference instead.
It would technically be possible to extract an MF reference from the MI
as MI->getParent()->getParent(), but that would not work for MIs that
are not inserted into any basic block.
Given the reasonably small number of places this constructor was used at
all, I preferred the compile time check to a run time assertion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170588 91177308-0d34-0410-b5e6-96231b3b80d8
I introduced it in r166785. PR14291.
If TD is unavailable use getScalarSizeInBits, but don't optimize
pointers or vectors of pointers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170586 91177308-0d34-0410-b5e6-96231b3b80d8
((x & 0xff00) >> 8) << 2
to
(x >> 6) & 0x3fc
This is general goodness since it folds a left shift into the mask. However,
the trailing zeros in the mask prevents the ARM backend from using the bit
extraction instructions. And worse since the mask materialization may require
an addition instruction. This comes up fairly frequently when the result of
the bit twiddling is used as memory address. e.g.
= ptr[(x & 0xFF0000) >> 16]
We want to generate:
ubfx r3, r1, #16, #8
ldr.w r3, [r0, r3, lsl #2]
vs.
mov.w r9, #1020
and.w r2, r9, r1, lsr #14
ldr r2, [r0, r2]
Add a late ARM specific isel optimization to
ARMDAGToDAGISel::PreprocessISelDAG(). It folds the left shift to the
'base + offset' address computation; change the mask to one which doesn't have
trailing zeros and enable the use of ubfx.
Note the optimization has to be done late since it's target specific and we
don't want to change the DAG normalization. It's also fairly restrictive
as shifter operands are not always free. It's only done for lsh 1 / 2. It's
known to be free on some cpus and they are most common for address
computation.
This is a slight win for blowfish, rijndael, etc.
rdar://12870177
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170581 91177308-0d34-0410-b5e6-96231b3b80d8
When the least bit of C is greater than V, (x&C) must be greater than V
if it is not zero, so the comparison can be simplified.
Although this was suggested in Target/X86/README.txt, it benefits any
architecture with a directly testable form of AND.
Patch by Kevin Schoedel
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170576 91177308-0d34-0410-b5e6-96231b3b80d8
There's probably a better expansion for those nodes than the default for
altivec, but this is better than crashing. VSELECTs occur in loop vectorizer
output.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170551 91177308-0d34-0410-b5e6-96231b3b80d8
I cannot reproduce it the failures locally, so I will keep an eye at the ppc
bots. This patch does add the change to the "Disassembly of section" message,
but that is not what was failing on the bots.
Original message:
Add a funciton to get the segment name of a section.
On MachO, sections also have segment names. When a tool looking at a .o file
prints a segment name, this is what they mean. In reality, a .o has only one
anonymous, segment.
This patch adds a MachO only function to fetch that segment name. I named it
getSectionFinalSegmentName since the main use for the name seems to be infor
the linker with segment this section should go to.
The patch also changes MachOObjectFile::getSectionName to return just the
section name instead of computing SegmentName,SectionName.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170545 91177308-0d34-0410-b5e6-96231b3b80d8
This changes adds shadow and origin propagation for unknown intrinsics
by examining the arguments and ModRef behaviour. For now, only 3 classes
of intrinsics are handled:
- those that look like simple SIMD store
- those that look like simple SIMD load
- those that don't have memory effects and look like arithmetic/logic/whatever
operation on simple types.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170530 91177308-0d34-0410-b5e6-96231b3b80d8
MapVector is a bit heavyweight, but I don't see a simpler way. Also the
InductionList is unlikely to be large. This should help 3-stage selfhost
compares (PR14647).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170528 91177308-0d34-0410-b5e6-96231b3b80d8
