Note that I followed the AVX2 convention here and didn't add LLVM intrinsics
for stores. These can be generated with the nontemporal hint on LLVM IR
stores (see new test). The GCC builtins are lowered directly into nontemporal
stores.
<rdar://problem/17082571>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211176 91177308-0d34-0410-b5e6-96231b3b80d8
Use the max 64-bit element size with EVEX_CD8. This should work since element
size is ignored for a full-vector access (FVM).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211175 91177308-0d34-0410-b5e6-96231b3b80d8
The PowerPC back-end uses BLA to implement calls to functions at
known-constant addresses, which is apparently used for certain
system routines on Darwin.
However, with the 64-bit SVR4 ABI, this is actually incorrect.
An immediate function pointer value on this platform is not
directly usable as a target address for BLA:
- in the ELFv1 ABI, the function pointer value refers to the
*function descriptor*, not the code address
- in the ELFv2 ABI, the function pointer value refers to the
global entry point, but BL(A) would only be correct when
calling the *local* entry point
This bug didn't show up since using immediate function pointer
values is not usually done in the 64-bit SVR4 ABI in the first
place. However, I ran into this issue with a certain use case
of LLVM as JIT, where immediate function pointer values were
uses to implement callbacks from JITted code to helpers in
statically compiled code.
Fixed by simply not using BLA with the 64-bit SVR4 ABI.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211174 91177308-0d34-0410-b5e6-96231b3b80d8
My patch r204634 to emit instructions in little-endian format failed to
handle those special cases where we emit a pair of instructions from a
single LLVM MC instructions (like the bl; nop pairs used to implement
the call sequence).
In those cases, we still need to emit the "first" instruction (the one
in the more significant word) first, on both big and little endian,
and not swap them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211171 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The assembler tries to reuse the destination register for memory operations whenever
it can but it's not possible to do so if the destination register is not a GPR.
Example:
ldc1 $f0, sym
should expand to:
lui $at, %hi(sym)
ldc1 $f0, %lo(sym)($at)
It's entirely wrong to expand to:
lui $f0, %hi(sym)
ldc1 $f0, %lo(sym)($f0)
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D4173
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211169 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch doesn't really change the logic behind expandMemInst but it allows
us to assemble .S files that use .set noat with some macros. For example:
.set noat
lw $k0, offset($k1)
Can expand to:
lui $k0, %hi(offset)
addu $k0, $k0, $k1
lw $k0, %lo(offset)($k0)
with no need to access $at.
Reviewers: dsanders, vmedic
Reviewed By: dsanders, vmedic
Differential Revision: http://reviews.llvm.org/D4159
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211165 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Added negative test case so that we can be sure we handle erroneous situations
while parsing the .cpsetup directive.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D3681
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211160 91177308-0d34-0410-b5e6-96231b3b80d8
It looks like there are two versions of LowerCallTo here: the
SelectionDAGBuilder one is designed to operate on LLVM IR, and the
TargetLowering one in the case where everything is at DAG level.
Previously, only the SelectionDAGBuilder variant could handle demoting
an impossible return to sret semantics (before delegating to the
TargetLowering version), but this functionality is also useful for
certain libcalls (e.g. 128-bit operations on 32-bit x86). So this
commit moves the sret handling down a level.
rdar://problem/17242889
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211155 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Provides an abstraction for a random number generator (RNG) that produces a stream of pseudo-random numbers.
The current implementation uses C++11 facilities and is therefore not cryptographically secure.
The RNG is salted with the text of the current command line invocation.
In addition, a user may specify a seed (reproducible builds).
In clang, the seed can be set via
-frandom-seed=X
In the back end, the seed can be set via
-rng-seed=X
This is the llvm part of the patch.
clang part: D3391
Reviewers: ahomescu, rinon, nicholas, jfb
Reviewed By: jfb
Subscribers: jfb, perl
Differential Revision: http://reviews.llvm.org/D3390
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211145 91177308-0d34-0410-b5e6-96231b3b80d8
ReconstructShuffle() may wrongly creat a CONCAT_VECTOR trying to
concat 2 of v2i32 into v4i16. This commit is to fix this issue and
try to generate UZP1 instead of lots of MOV and INS.
Patch is initalized by Kevin Qin, and refactored by Tim Northover.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211144 91177308-0d34-0410-b5e6-96231b3b80d8
This patch is a follow up to r211040 & r211052. Rather than bailing out of fast
isel this patch will generate an alternate instruction (movabsq) instead of the
leaq. While this will always have enough room to handle the 64 bit displacment
it is generally over kill for internal symbols (most displacements will be
within 32 bits) but since we have no way of communicating the code model to the
the assmebler in order to avoid flagging an absolute leal/leaq as illegal when
using a symbolic displacement.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211130 91177308-0d34-0410-b5e6-96231b3b80d8
This optimizes predicates for certain compares, such as fcmp oeq %x, %x to
fcmp ord %x, %x. The latter one is more efficient to generate.
The same optimization is applied to conditional branches.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211126 91177308-0d34-0410-b5e6-96231b3b80d8
This pattern loses some of its usefulness when the mutex type is
statically polymorphic as opposed to runtime polymorphic, as
swapping out the mutex type requires changing a significant number
of function parameters, and templatizing the function parameter
requires the methods to be defined in the headers.
Furthermore, if LLVM is compiled with threads disabled then there
may even be no mutex to acquire anyway, so it should not be up to
individual APIs to know whether or not acquiring a mutex is required
to use those APIs to begin with. It should be up to the user of the
API.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211125 91177308-0d34-0410-b5e6-96231b3b80d8
The OSX ranlib warns on files with no symbols, and lib/Support/WindowsError.cpp
was empty when building on non-windows.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211118 91177308-0d34-0410-b5e6-96231b3b80d8
We need to store a value greater than or equal to the number of LDS
bytes allocated by the shader in the m0 register in order for LDS
instructions to work correctly.
We always initialize m0 at the beginning of a shader, but this register
is also used for indirect addressing offsets, so we need to
re-initialize it any time we use indirect addressing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211107 91177308-0d34-0410-b5e6-96231b3b80d8
To make sure branches are in range, we need to do a better job of estimating
the length of an inline assembly block than "it's probably 1 instruction, who'd
write asm with more than that?".
Fortunately there's already a (highly suspect, see how many ways you can think
of to break it!) callback for this purpose, which is used by the other targets.
rdar://problem/17277590
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211095 91177308-0d34-0410-b5e6-96231b3b80d8
Multiplication by an integer with a number of trailing zero bits leaves
the same number of lower bits of the result initialized to zero.
This change makes MSan take this into account in the case of multiplication by
a compile-time constant.
We don't handle the general, non-constant, case because
(a) it's not going to be cheap (computation-wise);
(b) multiplication by a partially uninitialized value in user code is
a bad idea anyway.
Constant case must be handled because it appears from LLVM optimization of a
completely valid user code, as the test case in compiler-rt demonstrates.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211092 91177308-0d34-0410-b5e6-96231b3b80d8
Mimic r116632 in passing LLVM_VERSION_INFO from the Makefile build
system to the build. This improves the -version output of tools that
use llvm::cl under the configure+make system.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211091 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
As a starting step, we only use one simple heuristic: if the sign bits
of both a and b are zero, we can prove "add a, b" do not unsigned
overflow, and thus convert it to "add nuw a, b".
Updated all affected tests and added two new tests (@zero_sign_bit and
@zero_sign_bit2) in AddOverflow.ll
Test Plan: make check-all
Reviewers: eliben, rafael, meheff, chandlerc
Reviewed By: chandlerc
Subscribers: chandlerc, llvm-commits
Differential Revision: http://reviews.llvm.org/D4144
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211084 91177308-0d34-0410-b5e6-96231b3b80d8
r199771 accidently broke the logic that makes sure that SROA only splits
load on byte boundaries. If such a split happens, some bits get lost
when reassembling loads of wider types, causing data corruption.
Move the width check up to reject such splits early, avoiding the
corruption. Fixes PR19250.
Patch by: Björn Steinbrink <bsteinbr@gmail.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211082 91177308-0d34-0410-b5e6-96231b3b80d8
Make use of helper functions to simplify the branch and compare instruction
selection in FastISel. Also add test cases for compare and conditonal branch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211077 91177308-0d34-0410-b5e6-96231b3b80d8
[This is resubmitting r210721, which was reverted due to suspected breakage
which turned out to be unrelated].
Some extra review comments were addressed. See D4090 and D4147 for more details.
The Clang change that produces this metadata was committed in r210667
Patch by Mark Heffernan.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211076 91177308-0d34-0410-b5e6-96231b3b80d8
These parameters are intended to serve as sort of a contract that
you cannot access the functions outside of a mutex. However, the
entire JIT class cannot be accessed outside of a mutex anyway, and
all methods acquire a lock as soon as they are entered. Since the
containing class already is not intended to be thread-safe, it only
serves to add code clutter.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211071 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patches allows non conversions like i1=i2; where both are global ints.
In addition, arithmetic and other things start to work since fast-isel will use
existing patterns for non fast-isel from tablegen files where applicable.
In addition i8, i16 will work in this limited context for assignment without the need
for sign extension (zero or signed). It does not matter how i8 or i16 are loaded (zero or sign extended)
since only the 8 or 16 relevant bits are used and clang will ask for sign extension before using them in
arithmetic. This is all made more complete in forthcoming patches.
for example:
int i, j=1, k=3;
void foo() {
i = j + k;
}
Keep in mind that this pass is not enabled right now and is an experimental pass
It can only be enabled with a hidden option to llvm of -mips-fast-isel.
Test Plan: Run test-suite, loadstore2.ll and I will run some executable tests.
Reviewers: dsanders
Subscribers: mcrosier
Differential Revision: http://reviews.llvm.org/D3856
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211061 91177308-0d34-0410-b5e6-96231b3b80d8
Define an intrinsic for the frontend to use and pattern match it to
the RBIT instruction.
rdar://9283021
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211058 91177308-0d34-0410-b5e6-96231b3b80d8
We already have an ARMISD node. Create an intrinsic to map to it so we can
add support for the frontend __rbit() intrinsic.
rdar://9283021
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211057 91177308-0d34-0410-b5e6-96231b3b80d8
Rafael opened http://llvm.org/bugs/show_bug.cgi?id=19893 to track non-optimal
code generation for forming a function address that is local to the compile
unit. The existing code was treating both local and non-local functions
identically.
This patch fixes the problem by properly identifying local functions and
generating the proper addis/addi code. I also noticed that Rafael's earlier
changes to correct the surrounding code in PPCISelLowering.cpp were also
needed for fast instruction selection in PPCFastISel.cpp, so this patch
fixes that code as well.
The existing test/CodeGen/PowerPC/func-addr.ll is modified to test the new
code generation. I've added a -O0 run line to test the fast-isel code as
well.
Tested on powerpc64[le]-unknown-linux-gnu with no regressions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211056 91177308-0d34-0410-b5e6-96231b3b80d8
These were being used as unreferenced parameters to enforce that
the methods must not be called without holding a mutex, but all
of the methods in question were internal, and the methods were
only exposed through an interface whose entire purpose was to
serialize access to these structures, so expecting the methods
to be accessed under a mutex is reasonable enough.
Reviewed by: blaikie
Differential Revision: http://reviews.llvm.org/D4162
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211054 91177308-0d34-0410-b5e6-96231b3b80d8
Added comment to clarify why we r211040 choose to bail out of fast isel instead
of generating a more complicated relocation, and fix mislabelled register in the
comments of the asan test case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211052 91177308-0d34-0410-b5e6-96231b3b80d8
ARM v7M has ldrex/strex but not ldrexd/strexd. This means 32-bit
operations should work as normal, but 64-bit ones are almost certainly
doomed.
Patch by Phoebe Buckheister.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211042 91177308-0d34-0410-b5e6-96231b3b80d8
On x86_86 the lea instruction can only use a 32 bit immediate value. When
the code is compiled statically the RIP register is not used, meaning the
immediate is all that can be used for the relocation, which is not sufficient
in the case of targets more than +/- 2GB away. This patch bails out of fast
isel in those cases and reverts to DAG which does the right thing.
Test case included.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211040 91177308-0d34-0410-b5e6-96231b3b80d8
When LowerSwitch transforms a switch instruction into a tree of ifs it
is actually performing a binary search into the various case ranges, to
see if the current value falls into one cases range of values.
So, if we have a program with something like this:
switch (a) {
case 0:
do0();
break;
case 1:
do1();
break;
case 2:
do2();
break;
default:
break;
}
the code produced is something like this:
if (a < 1) {
if (a == 0) {
do0();
}
} else {
if (a < 2) {
if (a == 1) {
do1();
}
} else {
if (a == 2) {
do2();
}
}
}
This code is inefficient because the check (a == 1) to execute do1() is
not needed.
The reason is that because we already checked that (a >= 1) initially by
checking that also (a < 2) we basically already inferred that (a == 1)
without the need of an extra basic block spawned to check if actually (a
== 1).
The patch addresses this problem by keeping track of already
checked bounds in the LowerSwitch algorithm, so that when the time
arrives to produce a Leaf Block that checks the equality with the case
value / range the algorithm can decide if that block is really needed
depending on the already checked bounds .
For example, the above with "a = 1" would work like this:
the bounds start as LB: NONE , UB: NONE
as (a < 1) is emitted the bounds for the else path become LB: 1 UB:
NONE. This happens because by failing the test (a < 1) we know that the
value "a" cannot be smaller than 1 if we enter the else branch.
After the emitting the check (a < 2) the bounds in the if branch become
LB: 1 UB: 1. This is because by checking that "a" is smaller than 2 then
the upper bound becomes 2 - 1 = 1.
When it is time to emit the leaf block for "case 1:" we notice that 1
can be squeezed exactly in between the LB and UB, which means that if we
arrived to that block there is no need to emit a block that checks if (a
== 1).
Patch by: Marcello Maggioni <hayarms@gmail.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211038 91177308-0d34-0410-b5e6-96231b3b80d8
Originally I switched the LD/ST optimizer off in TargetMachine as it was previously, but Eric has suggested he'd prefer that it be short-circuited in the pass itself.
No functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211037 91177308-0d34-0410-b5e6-96231b3b80d8
This makes llvm-nm ignore members that are not sufficiently aligned for
lib/Object to handle.
These archives are invalid. GNU AR is able to handle this, but in general
just warns about broken archive members.
We should probably start warning too, but for now just make sure llvm-nm
exits with an 0.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211036 91177308-0d34-0410-b5e6-96231b3b80d8
Now that we have c++11, even things like ErrorOr<std::unique_ptr<...>> are
easy to use.
No intended functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211033 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
There is no change to the restrictions, just the result register is stored
once in the encoding rather than twice. The rt field is zero in
MIPS32r6/MIPS64r6.
Depends on D4119
Reviewers: zoran.jovanovic, jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4120
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211019 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The linked-load, store-conditional operations have been re-encoded such
that have a 9-bit offset instead of the 16-bit offset they have prior to
MIPS32r6/MIPS64r6.
While implementing this, I noticed that the atomic load/store pseudos always
emit a sign extension using sll and sra. I have improved this to use seb/seh
when they are available (MIPS32r2/MIPS64r2 and above).
Depends on D4118
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4119
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211018 91177308-0d34-0410-b5e6-96231b3b80d8
given in the Unicode spec
That is, replace every maximal subpart of an ill-formed subsequence with one
U+FFFD.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211015 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The error message for the invalid.s cases isn't very helpful. It happens because
there is an instruction with a wider immediate that would have matched if the
NotMips32r6 predicate were true. I have some WIP to improve the message but it
affects most error messages for removed/re-encoded instructions on
MIPS32r6/MIPS64r6 and should therefore be a separate commit.
Depens on D4115
Reviewers: zoran.jovanovic, jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4117
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211012 91177308-0d34-0410-b5e6-96231b3b80d8
As a follow-up to r210375 which canonicalizes addrspacecast
instructions, this patch canonicalizes addrspacecast constant
expressions.
Given clang uses ConstantExpr::getAddrSpaceCast to emit addrspacecast
cosntant expressions, this patch is also a step towards having the
frontend emit canonicalized addrspacecasts.
Piggyback a minor refactor in InstCombineCasts.cpp
Update three affected tests in addrspacecast-alias.ll,
access-non-generic.ll and constant-fold-gep.ll and added one new test in
constant-fold-address-space-pointer.ll
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211004 91177308-0d34-0410-b5e6-96231b3b80d8
I haven't nailed this down entirely, but this is about as small of a
test case as I can seem to construct and adequately demonstrates the
crasher. I'll continue investigating the root cause/fix(es).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210993 91177308-0d34-0410-b5e6-96231b3b80d8
It's valid to use FP_TO_SINT when asking for a smaller type (e.g. all
"unsigned int16" values fit into a "signed int32"), but the reverse
isn't true.
Unfortunately, I'm not actually aware of any architecture with
asymmetric FP_TO_SINT and FP_TO_UINT handling and the logic happens to
work in the symmetric case, so I can't actually write a test for this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210986 91177308-0d34-0410-b5e6-96231b3b80d8
There's probably no acatual change in behaviour here, just updating
the LowerFP_TO_INT function to be more similar to the reverse
implementation and updating costs to current CodeGen.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210985 91177308-0d34-0410-b5e6-96231b3b80d8
This would assert if a constant address space was extern
and therefore didn't have an initializer. If the initializer
was undef, it would hit the unreachable unhandled initializer case.
An extern global should never really occur since we don't have
machine linking, but bugpoint likes to remove initializers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210967 91177308-0d34-0410-b5e6-96231b3b80d8
Now that we handle finding abstract variables at the end of the module,
remove the upfront handling and just ensure the abstract variable is
built when necessary.
In theory we could have a split implementation, where inlined variables
are immediately constructed referencing the abstract definition, and
concrete variables are delayed - but let's go with one solution for now
unless there's a reason not to.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210961 91177308-0d34-0410-b5e6-96231b3b80d8
This patch is to move GlobalMerge pass from Transform/Scalar
to CodeGen, because GlobalMerge depends on TargetMachine.
In the mean time, the macro INITIALIZE_TM_PASS is also moved
to CodeGen/Passes.h. With this fix we can avoid making
libScalarOpts depend on libCodeGen.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210951 91177308-0d34-0410-b5e6-96231b3b80d8
Rather than relying on abstract variables looked up at the time the
concrete variable is created, look them up at the end of the module to
ensure they're referenced even if they're created after the concrete
definition. This completes/matches the work done in r209677 to handle
this for the subprograms themselves.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210946 91177308-0d34-0410-b5e6-96231b3b80d8
This doesn't fix the abstract variable handling yet, but it introduces a
similar delay mechanism as was added for subprograms, causing
DW_AT_location to be reordered to the beginning of the attribute list
for local variables, and fixes all the test fallout for that.
A subsequent commit will remove the abstract variable handling in
DbgVariable and just do the abstract variable lookup at module end to
ensure that abstract variables introduced after their concrete
counterparts are appropriately referenced by the concrete variable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210943 91177308-0d34-0410-b5e6-96231b3b80d8
Prior to this change, error handling functions must be installed
and removed only inside of an llvm_[start/stop]_multithreading
pair. This change allows error handling functions to be installed
any time, and from any thread.
Reviewed by: chandlerc
Differential Revision: http://reviews.llvm.org/D4140
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210937 91177308-0d34-0410-b5e6-96231b3b80d8
Init-order and use-after-return modes can currently be enabled
by runtime flags. use-after-scope mode is not really working at the
moment.
The only problem I see is that users won't be able to disable extra
instrumentation for init-order and use-after-scope by a top-level Clang flag.
But this instrumentation was implicitly enabled for quite a while and
we didn't hear from users hurt by it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210924 91177308-0d34-0410-b5e6-96231b3b80d8
Lowering this new node allows us to fold the almost universal
comparison for success before it's even formed. Instead we can create
a copy from EFLAGS and an X86ISD::SETCC operation since all "cmpxchg"
instructions set the zero-flag to the correct value.
rdar://problem/13201607
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210923 91177308-0d34-0410-b5e6-96231b3b80d8
Move / delete some of the more obviously wrong
setOperationAction calls. Most of these are setting Expand
for types that aren't legal which is the default anyway.
Leave stuff that might require more thought on whether it's
junk or not as it is.
No functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210922 91177308-0d34-0410-b5e6-96231b3b80d8
While std::error_code itself seems to work OK in all platforms, there
are few annoying differences with regards to the std::errc enumeration.
This patch adds a simple llvm enumeration, which will hopefully avoid build
breakages in other platforms and surprises as we get more uses of
std::error_code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210920 91177308-0d34-0410-b5e6-96231b3b80d8
This also simplifies the IR we create slightly: instead of working out
where success & failure should go manually, it turns out we can just
always jump to a success/failure block created for the purpose. Later
phases will sort out the mess without much difficulty.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210917 91177308-0d34-0410-b5e6-96231b3b80d8
This has two benefits: it makes the result more suitable for direct
insertaion into the struct to emulate the new cmpxchg, and it means
the name we give the instruction matches its actual effect better.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210916 91177308-0d34-0410-b5e6-96231b3b80d8
This code was never being used and any use of it would look fairly strange.
For example, it would try to map a object_error::parse_failed to
std::errc::invalid_argument.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210912 91177308-0d34-0410-b5e6-96231b3b80d8
This commit adds a weak variant of the cmpxchg operation, as described
in C++11. A cmpxchg instruction with this modifier is permitted to
fail to store, even if the comparison indicated it should.
As a result, cmpxchg instructions must return a flag indicating
success in addition to their original iN value loaded. Thus, for
uniformity *all* cmpxchg instructions now return "{ iN, i1 }". The
second flag is 1 when the store succeeded.
At the DAG level, a new ATOMIC_CMP_SWAP_WITH_SUCCESS node has been
added as the natural representation for the new cmpxchg instructions.
It is a strong cmpxchg.
By default this gets Expanded to the existing ATOMIC_CMP_SWAP during
Legalization, so existing backends should see no change in behaviour.
If they wish to deal with the enhanced node instead, they can call
setOperationAction on it. Beware: as a node with 2 results, it cannot
be selected from TableGen.
Currently, no use is made of the extra information provided in this
patch. Test updates are almost entirely adapting the input IR to the
new scheme.
Summary for out of tree users:
------------------------------
+ Legacy Bitcode files are upgraded during read.
+ Legacy assembly IR files will be invalid.
+ Front-ends must adapt to different type for "cmpxchg".
+ Backends should be unaffected by default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210903 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
cache and pref were added in MIPS-III, and MIPS32 but were re-encoded in
MIPS32r6/MIPS64r6 to use a 9-bit offset rather than the 16-bit offset
available to earlier cores.
Resolved the decoding conflict between pref and lwc3.
Depends on D4115
Reviewers: zoran.jovanovic, jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4116
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210900 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
b(ge|lt)zal have been removed in MIPS32r6/MIPS64r6. However, bal (an alias
for 'bgezal $zero, $offset') still remains with the same encoding it had
prior to MIPS32r6/MIPS64r6.
Updated the MipsNaCLELFStreamer, and MipsLongBranch to correctly handle the
MIPS32r6/MIPS64r6 BAL instruction in addition to the existing BAL_BR pseudo.
No changes were required to the CodeGen test that looks for BAL
(test/CodeGen/Mips/longbranch.ll) since the new instruction has the same
syntax.
Depends on D4113
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4114
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210898 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
It's not emitted by the code generator so we only need assembler tests.
Also added missing daddi aliases from dsub mnemonics, and removed a couple
duplicate dsub tests.
Depends on D4112
Reviewers: zoran.jovanovic, jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4113
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210897 91177308-0d34-0410-b5e6-96231b3b80d8
When targetting Thumb1 on a processor which has a VFP unit (which
is not accessible from Thumb1), we were converting the fastcc calling
convention to AAPCS-VFP, which is not possible.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210889 91177308-0d34-0410-b5e6-96231b3b80d8
CondCode actions are set with setCondCodeAction.
This should have been a harmless bug since the values seem to only
collide only with nodes that don't need to be handled, and these are
already correctly setup elsewhere.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210888 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for the cvttss2si/cvttsd2si intrinsics. Preceding
insertelement instructions are folded into the conversion instruction (if
possible).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210870 91177308-0d34-0410-b5e6-96231b3b80d8
Add branch weights to branch instructions, so that the following passes can
optimize based on it (i.e. basic block ordering).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210863 91177308-0d34-0410-b5e6-96231b3b80d8
so we can use initializer lists for the ARMSubtarget and then
use this to initialize a moved DataLayout on the subtarget from
the TargetMachine.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210861 91177308-0d34-0410-b5e6-96231b3b80d8
Previous algorithm for constructing [Address ranges]->[Compile Units]
mapping was wrong. It somewhat relied on the assumption that address ranges
for different compile units may not overlap. It is not so.
For example, two compile units may contain the definition of the same
linkonce_odr function. These definitions will be merged at link-time,
resulting in equivalent .debug_ranges entries for both these units
Instead of sorting and merging original address ranges (from .debug_ranges
and .debug_aranges), implement a different approach: save endpoints
of all ranges, and then use a sweep-line approach to construct
the desired mapping. If we find that certain address maps to
several compilation units, we just pick any of them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210860 91177308-0d34-0410-b5e6-96231b3b80d8
This commit adds MachineMemOperands to load and store instructions. This allows
the peephole optimizer to fold load instructions. Unfortunatelly the peephole
optimizer currently doesn't run at -O0.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210858 91177308-0d34-0410-b5e6-96231b3b80d8
the subtarget. Also remove unnecessary argument to the constructor
at the same time, we already have access via the subtarget.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210844 91177308-0d34-0410-b5e6-96231b3b80d8