The analysis will be needed by both the greedy register allocator and the
X86FloatingPoint pass. It only needs to be computed once when the CFG doesn't
change.
This pass is very fast, usually showing up as 0.0% wall time.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122832 91177308-0d34-0410-b5e6-96231b3b80d8
prologue and epilogue if the adjustment is 8. Similarly, use pushl / popl if
the adjustment is 4 in 32-bit mode.
In the epilogue, takes care to pop to a caller-saved register that's not live
at the exit (either return or tailcall instruction).
rdar://8771137
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122783 91177308-0d34-0410-b5e6-96231b3b80d8
This allows us to compile:
void test(char *s, int a) {
__builtin_memset(s, a, 15);
}
into 1 mul + 3 stores instead of 3 muls + 3 stores.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122710 91177308-0d34-0410-b5e6-96231b3b80d8
header for now for memset/memcpy opportunities. It turns out that loop-rotate
is successfully rotating loops, but *DOESN'T MERGE THE BLOCKS*, turning "for
loops" into 2 basic block loops that loop-idiom was ignoring.
With this fix, we form many *many* more memcpy and memsets than before, including
on the "history" loops in the viterbi benchmark, which look like this:
for (j=0; j<MAX_history; ++j) {
history_new[i][j+1] = history[2*i][j];
}
Transforming these loops into memcpy's speeds up the viterbi benchmark from
11.98s to 3.55s on my machine. Woo.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122685 91177308-0d34-0410-b5e6-96231b3b80d8
earlyclobber stuff. This should fix PRs 2313 and 8157.
Unfortunately, no testcase, since it'd be dependent on register
assignments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122663 91177308-0d34-0410-b5e6-96231b3b80d8
numbering, in which it considers (for example) "%a = add i32 %x, %y" and
"%b = add i32 %x, %y" to be equal because the operands are equal and the
result of the instructions only depends on the values of the operands.
This has almost no effect (it removes 4 instructions from gcc-as-one-file),
and perhaps slows down compilation: I measured a 0.4% slowdown on the large
gcc-as-one-file testcase, but it wasn't statistically significant.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122654 91177308-0d34-0410-b5e6-96231b3b80d8
DAG scheduling during isel. Most new functionality is currently
guarded by -enable-sched-cycles and -enable-sched-hazard.
Added InstrItineraryData::IssueWidth field, currently derived from
ARM itineraries, but could be initialized differently on other targets.
Added ScheduleHazardRecognizer::MaxLookAhead to indicate whether it is
active, and if so how many cycles of state it holds.
Added SchedulingPriorityQueue::HasReadyFilter to allowing gating entry
into the scheduler's available queue.
ScoreboardHazardRecognizer now accesses the ScheduleDAG in order to
get information about it's SUnits, provides RecedeCycle for bottom-up
scheduling, correctly computes scoreboard depth, tracks IssueCount, and
considers potential stall cycles when checking for hazards.
ScheduleDAGRRList now models machine cycles and hazards (under
flags). It tracks MinAvailableCycle, drives the hazard recognizer and
priority queue's ready filter, manages a new PendingQueue, properly
accounts for stall cycles, etc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122541 91177308-0d34-0410-b5e6-96231b3b80d8
If the basic block containing the BCCi64 (or BCCZi64) instruction ends with
an unconditional branch, that branch needs to be deleted before appending
the expansion of the BCCi64 to the end of the block.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122521 91177308-0d34-0410-b5e6-96231b3b80d8
Type legalization splits up i64 values into pairs of i32 values, which leads
to poor quality code when inserting or extracting i64 vector elements.
If the vector element is loaded or stored, it can be treated as an f64 value
and loaded or stored directly from a VPR register. Use the pre-legalization
DAG combiner to cast those vector elements to f64 types so that the type
legalizer won't mess them up. Radar 8755338.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122319 91177308-0d34-0410-b5e6-96231b3b80d8
to be the one we want to use. bugpoint reduced testcase is a little large,
I'll see if I can simplify it down more.
Fixes part of rdar://8782207
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122307 91177308-0d34-0410-b5e6-96231b3b80d8
tPseudoInst class, its size was changed from "special" to "2 bytes". This is
incorrect because the jump table will no longer be taken into account when
calculating branch offsets.
<rdar://problem/8782216>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122303 91177308-0d34-0410-b5e6-96231b3b80d8
lowering to use it. Hopefully the pattern fragment is doing the right thing with XMM0, looks correct in testing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122277 91177308-0d34-0410-b5e6-96231b3b80d8
the same as setcc. Optimize ADDC(0,0,FLAGS) -> SET_CARRY(FLAGS). This is
a step towards finishing off PR5443. In the testcase in that bug we now get:
movq %rdi, %rax
addq %rsi, %rax
sbbq %rcx, %rcx
testb $1, %cl
setne %dl
ret
instead of:
movq %rdi, %rax
addq %rsi, %rax
movl $0, %ecx
adcq $0, %rcx
testq %rcx, %rcx
setne %dl
ret
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122219 91177308-0d34-0410-b5e6-96231b3b80d8
doesn't, match it back to setb.
On a 64-bit version of the testcase before we'd get:
movq %rdi, %rax
addq %rsi, %rax
sbbb %dl, %dl
andb $1, %dl
ret
now we get:
movq %rdi, %rax
addq %rsi, %rax
setb %dl
ret
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122217 91177308-0d34-0410-b5e6-96231b3b80d8
their carry depenedencies with MVT::Flag operands) and use clean and beautiful
EFLAGS dependences instead.
We do this by changing the modelling of SBB/ADC to have EFLAGS input and outputs
(which is what requires the previous scheduler change) and change X86 ISelLowering
to custom lower ADDC and friends down to X86ISD::ADD/ADC/SUB/SBB nodes.
With the previous series of changes, this causes no changes in the testsuite, woo.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122213 91177308-0d34-0410-b5e6-96231b3b80d8
consistently by moving it out of lowering into dag combine.
Add some missing patterns for matching away extended versions of setcc_c.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122201 91177308-0d34-0410-b5e6-96231b3b80d8
headers provide symbols outside namespace std and the LLVM coding standards
state that we should prefix all of them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122192 91177308-0d34-0410-b5e6-96231b3b80d8
This resolves a README entry and technically resolves PR4916,
but we still get poor code for the testcase in that PR because
GVN isn't CSE'ing uadd with add, filed as PR8817.
Previously we got:
_test7: ## @test7
addq %rsi, %rdi
cmpq %rdi, %rsi
movl $42, %eax
cmovaq %rsi, %rax
ret
Now we get:
_test7: ## @test7
addq %rsi, %rdi
movl $42, %eax
cmovbq %rsi, %rax
ret
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122182 91177308-0d34-0410-b5e6-96231b3b80d8
It turns out that ppc backend has really weird interdependencies
over different hooks and all stuff is fragile wrt small changes.
This should fix PR8749
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122155 91177308-0d34-0410-b5e6-96231b3b80d8
ARM::tMOVgpr2gpr. But this check didn't change. As a result, we were getting
misaligned references to the jump table from an ADR instruction.
There is a test case, but unfortunately it's sensitive to random code changes.
<rdar://problem/8782223>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122131 91177308-0d34-0410-b5e6-96231b3b80d8
may be called. If the entry block is empty, the insertion point iterator will be
the "end()" value. Calling ->getParent() on it (among others) causes problems.
Modify materializeFrameBaseRegister to take the machine basic block and insert
the frame base register at the beginning of that block. (It's very similar to
what the code does all ready. The only difference is that it will always insert
at the beginning of the entry block instead of after a previous materialization
of the frame base register. I doubt that that matters here.)
<rdar://problem/8782198>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122104 91177308-0d34-0410-b5e6-96231b3b80d8
IsSymbolRefDifferenceFullyResolved, it turns out this does change behavior on
enough cases for x86-32 that I would rather wait a bit on it.
- In practice, we will want to change this eventually because it only means we
generate less relocations (it also eliminates the need for the horrible
'.set' hack that Darwin requires in some places).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122042 91177308-0d34-0410-b5e6-96231b3b80d8
are correctly marked as used. This removes a hack where the call instructions
marked all possible argument registers as used in the tablegen description.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121994 91177308-0d34-0410-b5e6-96231b3b80d8
